Login problem VPN on PIX on the side of the inside of the n/w

I am tring to connect to the vpn server (pix) outside my laptop within the network.

I have routed ip vpn on pix515 and fine ping pix.but not able to ping of 3550 switch and computer laptop.

How to get the vpn ip Switch? as I don't know the mask of the ip...

I would also like to know... is their something extra that I need on pix or 3550?

Hello!

-What is the default gateway of your laptop?

-You do any kind of NAT on the PIX? What is NAT PAT, static or normal?

-Can you ping the inside of the PIX of the laptop?

There could be several problems to solve here.

(1) first of all, make sure that your laptop has access to the internet

(2) If you want to ping him make sure internet you have an ACL on the PIX like the one below:

i.e.

Allow Access - list icmp an entire TEST

TEST group access in the interface outside

Also make sure you have no access list applied inside the PIX

-Now, can you connect at all?

-When you connect to? Another PIX? Router? Hub?

If you pass by PAT make sure that you have this command on the PIX:

"fixup protocol esp-ike.

Please let me know if you can answer my questions, in this way, it would be easier to help you.

Frank

Tags: Cisco Security

Similar Questions

Any login problem VPN - ASA5510

Hi all

I'm simulate Anyconnect VPN connection in the laboratory. I have a problem when the Anyconnect VPN on ASA5510 configuration.

I can have a successful connection anyconnect but I can't ping my firewall IPs Interface while I'm in the connection.

ASA 5510

Outside intellectual property: 192.168.1.1/24

PC connected to the external Interface: 192.168.1.10/24

Domestic IP:10.10.10.1/24

PC connected inside the Interface: 10.10.10.100/24

Pool: 10.20.20.11 - 10.20.20.50/24

I have a VPN connection & the PC connected to the external Interface receives an IP address from the pool assigned (10.20.20.11 with the default gateway of 10.20.20.1). But I can't reach (ping/telent) to the ASA, even if I'm on the anyconnect VPN.

I think that this is mainly because NAT/routing issue...

Please find the attached file (with show execution & see the release of the version).

Thanks in advance.

Set "inside access management.

Sent by Cisco Support technique iPad App

Start-up/login problem. Vista starts by the boot sequence then cursor and black screen appears but nothing else.

My laptop recently locked up when running a DVD rip, I waited an hour or so to see if he would respond, but he didn't, so I turned off the laptop by holding the power button down. I restarted the computer and it loaded correctly to the logon screen and allowed me to log in as usual. Once the computer was connected, I noticed that the sidebar was not loading, and when I click on what whether the locked computer.

To try to remedy this I tried to start the PC in safe mode to perform a restore could noticed that I had not created restore points. I then tried to fill a start last known good config upward, it did not work. Then, I tried a CHKDSK/r procedure at startup. It worked fine until step 3 of 5, on which he seems to hang, I left it overnight and it was still on the same stage. So I have powerd off the PC and tried to start. But now, the PC is delivered to the black screen and the cursor as shown above.

I created the new folder of the event log of the prompt on the Vista recovery disc option

I did a repair to start - no problems found

I checked that regedit in this \Microsoft\Windows NT\CurrentVersion\Winlogon. shell contains only explore

When you are looking for through other Forums a cause of this problem appears to be to do with the permissions of the user being changed by the chkdsk does not complete, however I don't see how to fix this through the command prompt.

As noted, I can access command prompt on the recovery disk. Any help or suggestions are greatly appreciated.

You already did a great job of troubleshooting - exactly what I would have recommended here if you had not already tried. Play well! Here is one that you did not and I would start one you tried (because I feel that it is perhaps the root of the problem.

Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).

If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228. Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

While in the command prompt, type chkdsk /f /r and enter and let it run. She might want to plan itself to run at the next reboot (but I don't think that will happen if launched from the disk). If so, answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause. I know you tried this before, but we'll try again by using a slightly different command and see if it works this time.

I hope this helps. If this isn't the case, then we should try to reinstall the system (backup first) as only option short taking in a computer repair shop. But we'll see what happens with the first above.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Save the password on the Client VPN with PIX

I'm running a PIX 515 6.1 (2) configured for a small number of VPN clients. I want VPN clients to automatically remember the password of login for users do not have to enter it each time (we have an application which periodically autoconnexions).

While it is a configurable option with concentrators 3000 series, it seems not be configurable with the PIX.

The only work around, I can find is to make the connection file (.pcf) read-only and set SaveUserPassword = 1. The problem

which is the password, and then must be stored in clear text in the file and it becomes inconvenient for the user to change their password.

Does anyone know if the command exists on the PIX from the VPN client to save the connection password?

Thank you

Misha

The command to do this is not currently available on the PIX. He has just been included in the IOS EZVPN server functionality, but have not heard of anything anyone yet as to if it will be included in the PIX.

If you want this feature, do not hesitate to contact your account manager and have them grow for him, the more customers requesting a new feature faster he gets.

Remote VPN with PIX without access to the local network

Hi @all,

I ve running into problems and I have not found any solution. Can someone check my config?

Facts:

PIX 501 6.3 (3)

4.04 VPN client

Wanted solution: access to HO via VPN

VPN tunnel will be established, I get an IP address, but I can´t the systems behind the pix and the pix of access itself.

To the VPN Client Staticts, I see outgoing packets, but no entrant (if I send a ping to peer behind the pix)

I hope someone can help me

Attached is my config:

PIX 501 and 506/506e pix are not supported in v7 due to the fact that the cpu is not able to deal with the extended features of v7.

PIX 520 is not supported I guess it's because of the fact that the model is discontinued.

Phone Droid of Pix for the PPTP VPN

I tried to set up a PPTP VPN between a Droid phone and a performer 6.3.5 Pix code. As much as I can say the configuration is correct and I can open the vpn pptp fine from my laptop however the Droid refuses to connect. Here is the relevant configuration.

VPDN droid group accept dialin pptp

VPDN group droid ppp authentication pap

VPDN group droid ppp authentication chap

VPDN group droid ppp mschap authentication

VPDN droid Group client configuration address local vpnpool2

VPDN group droid pptp echo 60

VPDN group of local authentication client droid

VPDN group droid username * password *.

I turned on him debugs following:

Debug ppp negotiation

Debug ppp io

Debug ppp PAPU

Debug ppp chap

Debug ppp error

Debug ppp uauth

Debug vpdn event

Debug vpdn error

VPDN debug package

I've narrowed the problem down to the following message is displayed, but I'm not sure what this means:

PPP xmit, ifc = 0, len: 22 data: ff03c021040100120104057802060000000007020802

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 97.145.147.41, len 38, 18 seq, ack 8, data: 3081880b00169c450000001200000008ff03c021040100120104057802060000000007020802

Xmit Link Control Protocol pkt, action code is: Config request, len is: 11

PKT dump: 0305c2238005062affcd96

LCP option: AUTHENTICATION_TYPES, len: 5, data: c22380

LCP option: MAGIC_NUMBER, len: 6, data: 2affcd96

PPP xmit, ifc = 0, len: 19 data: ff03c0210102000f0305c2238005062affcd96

Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 97.145.147.41, len 35, 19 seq, ack 8, data: 3081880b00139c450000001300000008ff03c0210102000f0305c2238005062affcd96

outside PPTP: pak xGRE 69.0.0.60 Recvd, len 52799, ack 805406731

PPP rcvd, ifc = 0, pppdev: 1, len: 28, data: ff03c02101010018010405780206000000000506990009f607020802

Pkt RCVD Link Control Protocol, action code is: Config request, len is: 20

PKT dump: 010405780206000000000506990009f607020802

LCP option: Max_Rcv_Units, len: 4, data: 0578

LCP option: ASYNC_MAP, len: 6, data: 00000000

LCP option: MAGIC_NUMBER, len: 6, data: 990009f6

LCP option: PROTOCOL_HDR_COMPRESSION, len: 2, data:

LCP option: ADDRESS_CONTROL_COMPRESSION, len: 2, data:

Xmit Link Control Protocol pkt, action code is: Config Reject, len is: 14

PKT dump: 0104057802060000000007020802

LCP option: Max_Rcv_Units, len: 4, data: 0578

LCP option: ASYNC_MAP, len: 6, data: 00000000

LCP option: PROTOCOL_HDR_COMPRESSION, len: 2, data:

LCP option: ADDRESS_CONTROL_COMPRESSION, len: 2, data:

PPP xmit, ifc = 0, len: 22 data: ff03c021040100120104057802060000000007020802

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 97.145.147.41, len 38, seq 20, sending ack 9, data: 3081880b00169c450000001400000009ff03c021040100120104057802060000000007020802

PPTP: soc select returns mask rd = 0 x 8

PPTP: cc rcvdata, socket fd = 3, new_conn: 0

PPTP: socket closed, fd = 3

PPTP LNP/Cl/11/11: Session destroy

Narrow, peripheral PPP going = 1

PPTP: cc awaiting entry, max soc fd = 2

If I read that correctly, this is the Pix rejecting the configuration proposed for the Droid phone?

Any suggestion or help would be greatly appreciated.

I'm having exactly the same problem. We receive this reply with debugs on PIX 6.3

Any help would be appreciated.

PPTP: socket select return 0 fd

PPTP: cc awaiting entry, max soc fd = 3

PPTP: soc select returns mask rd = 0 x 1
PPTP: new peer fd is 4
PPTP: created tunnel, id = 23

PPTP: cc rcvdata, socket fd = 4, new_conn: 1
PPTP: cc RRs 156 bytes of data

LNP 23 PPTP: CC I have 009c00011a2b3c4d0001000001000000000000030000000300010000616e6f6e796d6f757300000000000000000000000000000000000000000000000000...
LNP 23 PPTP: CC I have SCCRQ
LNP 23 PPTP: version of the Protocol 0 x 100
LNP 23 PPTP: framing caps 0 x 3
LNP 23 PPTP: carrier caps 0 x 3
LNP 23 PPTP: max channels 1
LNP 23 PPTP: firmware rev 0 x 0
LNP 23 PPTP: hostname "anonymous."
LNP 23 PPTP: vendor «»
LNP 23 PPTP: CC O SCCRP
PPTP: cc snddata, socket fd = 4, len = 156, data: 009c00011a2b3c4d000200000100010000000003000000030000120057462d50495800000000000000000000000000000000000000000000000000000000...

PPTP: cc awaiting entry, max soc fd = 4

PPTP: soc select returns mask rd = 0 x 10

PPTP: cc rcvdata, socket fd = 4, new_conn: 0
PPTP: cc RRs 168 bytes of data

LNP 23 PPTP: CC I have 00a800011a2b3c4d00070000c111175f000003e805f5e1000000000300000003200000000000000000000000000000000000000000000000000000000000...
LNP 23 PPTP: CC I have OCRQ
LNP 23 PPTP: call id 0xc111
LNP 23 PPTP: series num 5983
LNP 23 PPTP: min bps 1000:0x3e8
LNP 23 PPTP: max bps 100000000:0x5f5e100
LNP 23 PPTP: carrier type 3
LNP 23 PPTP: framing type 3
LNP 23 PPTP: recv victory size 8192
LNP 23 PPTP: ppd 0
LNP 23 PPTP: phone len num 0
LNP 23 PPTP: phone num «»
LNP/Cl 23/21 PPTP: CC O OCRP
PPTP: cc snddata, socket fd = 4, len = 32, data: 002000011a2b3c4d000800000015c1110100000000fa00001000000000000000

PPTP: cc awaiting entry, max soc fd = 4

outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 70.199.49.15, len 35, seq 1, ack 0, data: 3081880b0013c1110000000100000000ff03c0210101000f0305c2238005065366bd1e
Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 2, ack 0, data: 3081880b0016c1110000000200000000ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 3, ack 0, data: 3081880b0013c1110000000300000000ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 4, ack 1, data: 3081880b0016c1110000000400000001ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 5, ack 1, data: 3081880b0013c1110000000500000001ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 6, ack 2, data: 3081880b0016c1110000000600000002ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 7, ack 2, data: 3081880b0013c1110000000700000002ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 8, ack 3, data: 3081880b0016c1110000000800000003ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 9, ack 3, data: 3081880b0013c1110000000900000003ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 70.199.49.15, len 38, seq 10, ack 4, data: 3081880b0016c1110000000a00000004ff03c021040100120104057802060000000007020802
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 70.199.49.15, len 35, 11 seq, ack 5, data: 3081880b0013c1110000000b00000005ff03c0210102000f0305c2238005063391d9ff
Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, seq 12, sending ack 5, data: 3081880b0016c1110000000c00000005ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, seq 13, sending ack 5, data: 3081880b0013c1110000000d00000005ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: pak to 70.199.49.15, len 38, seq 14 xGRE sending ack 6, data: 3081880b0016c1110000000e00000006ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, seq 15, sending ack 6, data: 3081880b0013c1110000000f00000006ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 70.199.49.15, len 38, 16 seq, ack 7, data: 3081880b0016c1110000001000000007ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, seq 17, sending ack 7, data: 3081880b0013c1110000001100000007ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 70.199.49.15, len 38, 18 seq, ack 8, data: 3081880b0016c1110000001200000008ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 70.199.49.15, len 35, 19 seq, ack 8, data: 3081880b0013c1110000001300000008ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, seq 20, sending ack 9, data: 3081880b0016c1110000001400000009ff03c021040100120104057802060000000007020802
PPTP: soc select returns mask rd = 0 x 10

PPTP: cc rcvdata, socket fd = 4, new_conn: 0
PPTP: socket closed, fd = 4

PPTP: cc awaiting entry, max soc fd = 3

Webstedet har fundet and problem og kan ikke Vice den side, of the forsoger of the som to fa vist. Nedenstaende muligheder kan muligvis hjaelpe dig med at November problemet.

Windows Update

Webstedet har fundet and problem og kan ikke Vice den side, of the forsoger of the som to fa vist. Nedenstaende muligheder kan muligvis hjaelpe dig med at November problemet.

? ER der en losning

Unfortunately, disse men for a screw kun fransk pa support. Vaelg venligst said lands him: http://support.microsoft.com/common/international.aspx> og klikke pa PIL to support pa said sprog.

://Answers.Microsoft.com/en-US/Windows/Forum/windows_xp-windows_update/Windows-Updates/a19f6b44-74c9-48E0-b77d-2bc5f1b80c27 http://www.microsofttranslator.com/BV.aspx?from=en&to=da&a=http

UTC/GMT is 12:10 on Sunday, November 11, 2012

PIX is the VPN address

Hollo,

I can do two configuration of vpn on PIX 535 channel,

the first is:

Crypto ipsec transform-set esp - esp-md5-hmac P2Pset

ISAKMP identity address

part of pre authentication ISAKMP policy 9

encryption of ISAKMP policy 9

ISAKMP policy 9 md5 hash

9 5 ISAKMP policy group

ISAKMP policy 9 life 86400

ISAKMP enable VPN

map P2Pmap 10 ipsec-isakmp crypto

card crypto P2Pmap 10 corresponds to the address P2P2

card crypto P2Pmap 10 set pfs group2

card crypto P2Pmap 10 set peer 212.212.212.212

card crypto P2Pmap 10 the transform-set P2Pset value

ISAKMP key * address 212.212.212.212 netmask 255.255.255.255

P2P2 list of ip 172.16.0.0 access allow 255.255.255.0 10.1.1.0 255.255.255.0

#but, I want to spend only the 172.16.0.0/26 and the 172.16.0.128/27 and do not want the other networks in 172.16.32.0/24 and that's why I access list on the VPN interface like this:

tcp 10.1.1.0 allowed VPN access list 255.255.255.0 172.16.0.0 255.255.255.192

tcp 10.1.1.0 allowed VPN access list 255.255.255.0 172.16.0.128 255.255.255.224

deny access list an entire ip VPN

and the second is:

Crypto ipsec transform-set esp - esp-md5-hmac P2Pset

ISAKMP identity address

part of pre authentication ISAKMP policy 9

encryption of ISAKMP policy 9

ISAKMP policy 9 md5 hash

9 5 ISAKMP policy group

ISAKMP policy 9 life 86400

ISAKMP enable VPN

map P2Pmap 10 ipsec-isakmp crypto

card crypto P2Pmap 10 corresponds to the address P2P2

card crypto P2Pmap 10 set pfs group2

card crypto P2Pmap 10 set peer 212.212.212.212

card crypto P2Pmap 10 the transform-set P2Pset value

ISAKMP key * address 212.212.212.212 netmask 255.255.255.255

P2P2 list of ip 172.16.0.0 access allow 255.255.255.192 10.1.1.0 255.255.255.0

IP 172.16.0.128 allow Access - list P2P2 255.255.255.224 10.1.1.0 255.255.255.0

tcp 10.1.1.0 allowed VPN access list 255.255.255.0 172.16.0.0 255.255.255.192

tcp 10.1.1.0 allowed VPN access list 255.255.255.0 172.16.0.128 255.255.255.224

deny access list an entire ip VPN

and the question is: it of the same or not

Hi, Jerry

If you enable ipsec sysopt connection allowed then you have reason traffic after that is decrypted is not checked against the acl on the interface that the IPSEC traffic is received the.

If you disable the allowed sysopt connection then the ipsec traffic is decrypted and then checked against the acl that is on the interface that the IPSEC traffic is received the. Order for pix v6.x said as much

http://www.Cisco.com/en/us/docs/security/PIX/pix62/command/reference/s.html#wp1026942

I think we can say the same thing here :)

Jon

Can the customer vpn to pix interface unprotected to a protected interface

I have a pix multi-interface, the description of the interface is as follows:

Outside-> 10MB to ISP

Inside-> vlan main

DMZ-> Web servers, etc...

Lab1-> test application servers

LAB2-> test application servers

etc...

Comments wireless-> free wireless (connected to the Cisco WAP)

The open wireless only has access to the internet, not one of the reliable networks. It is an untrusted interface (security lvl 1). The external interface is security 0.

I want to be able to allow vpn access from the wireless in networks of trust like vpn from outside (internet) is processed.

I guess that the pix sees a vpn connection attempt to another of its interfaces.

The client times out connecting since the wireless for the pix outside IP interface.

The pix records simply this:

January 20, 2009 13:38:23: % 7-710005-PIX: UDP request and eliminated from 192.168.20.5/1346 to GuestWireless:yy.yy.yy.yy/500

the external interface IP = yy.yy.yy.yy

the pix is also the dhcp server for wireless network connections.

Is it still possible? If so, what Miss me?

Thank you

Dave

To answer: -.

The leg wireless of the PIX is the security level 1, and the external interface is the security level 0. That would not mean that vpn is launched from a higher to a lower security interface? Yes but the traffic is clear--asked to terminate a VPN connection to an interface that is locally attached to the PIX effectivly in the inside of the unit. Sure that PIX will refuse the connection he received on the external interface of the interface without comment thread.

No it isn't the same thing, something like: -.

crypto ISAKMP enable GuestWireless - this indicates the PIX to listen and accept connections VPN ISAKMP/issues of ANY device connected to this interface FOR the GuestWireless interface.

HTH >

VPN to PIX access problem.

I set up PPTP VPN on PIX 515 access with unrestricted license for Windows-based computers. I can connect but I'm unable to access all the resources on the network. I suspect this has something to access the list, but I don't know where to start. Here's the relevant part of the PIX config:

access-list all-traffic ip to allow a whole

access-list 100 permit icmp any any echo response

access-list 100 permit icmp any one time exceed

access-list 100 permit everything all unreachable icmp

.

IP address outside x.x.x.130 255.255.255.252

IP address inside 192.168.254.1 255.255.255.0

IP address x.x.x.97 255.255.255.224 DMZ1

address IP DMZ2 192.168.251.1 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

IP local pool vpnpool 192.168.254.201 - 192.168.254.254

.

Global (outside) 1 x.x.x.65 - x.x.x.93 netmask 255.255.255.224

Global (outside) 1 x.x.x.94 netmask 255.255.255.224

NAT (inside) 1 access-list all-traffic 0 0

(DMZ1) 1 access-list all-traffic NAT 0 0

Access-group 100 in external interface

Route outside 0.0.0.0 0.0.0.0 x.x.x.129 1

.

Sysopt connection permit-pptp

Telnet 192.168.254.0 255.255.255.0 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

VPDN Group 1 accept dialin pptp

PAP VPDN Group 1 ppp authentication

VPDN Group 1 chap for ppp authentication

VPDN Group 1 ppp authentication mschap

VPDN group ppp 1 encryption mppe auto

VPDN Group 1 client configuration address local vpnpool

VPDN Group 1 pptp echo 60

VPDN Group 1 client authentication local

VPDN username * password *.

VPDN allow outside

dhcpd address 192.168.254.100 - 192.168.254.200 inside

dhcpd dns x.x.x.131 x.x.x.200

dhcpd rental 86400

dhcpd ping_timeout 750

dhcpd allow inside

Looks like you forgot to add a "nat 0" defines that there are no PAT beween your local inside network and the PPTP DHCP pool.

PPTP pool must be different from the inside pool otherwise it is not routable correctly.

no ip local pool vpnpool 192.168.254.201 - 192.168.254.254

# Choose a new network PPTP pool that is not in use

example of dansMon # is 192.168.1.0/24

IP local pool vpnpool 192.168.1.1 - 192.168.1.254

access-list 101 permit ip 192.168.254.0 255.255.255.0 192.168.1.0 255.255.255.0

(Inside) NAT 0-list of access 101

See this site for more information:

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

http://www.Cisco.com/pcgi-bin/support/browse/psp_view.pl?p=hardware:PIX & s = Software_Configuration

see PPTP

sincerely

Patrick

Information on the routing of traffic of the client VPN to PIX.

Hey all,.

I could follow the VPN Wizard included in the PDM and able to connect with the VPN Clients for the PIX. But I'm looking for more information about how the routing is done.

For example, my remote is 67.71.252.xxx and my inside is 192.168.1.xxx. But if I connect via VPN to PIX Client, all data is transferred through my VPN to PIX and then trying to get out to the Internet.

I'll settle for data goes 192.168.1.xxx for transit through the VPN. This configuration made via the PIX or is it the responsibility of the Client machine to set up rules of the road?

All links to the guides to installation, or technical notes would be great.

Thank you inadvance.

Paul

Hello

I think the key word you are looking for is "split tunneling". This can be validated on the PIX using the vpngroup split access_list tunnel GroupName command.

"Split tunneling allows a remote VPN client or encrypted simultaneous Easy VPN remote access device to the corporate network and Internet access. Using the vpngroup split-tunnel command, specify the access list name with which to associate the split tunneling of traffic. "

In this example configuration: http://www.cisco.com/warp/public/110/pix3000.html, note that the same access list is used to "nat 0" and split-mining:

access-list 101 permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0

(Inside) NAT 0-list of access 101

vpngroup vpn3000 split tunnel 101

Order reference:

http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727ae.html#wp1099471

Please let us know if this helped

Kind regards

Mustafa

VPN Config after PIX of the utility of Conversion of ASA

After that I ran the PIX of the Conversion of the ASA tool he changed my key was she in a single asterisk. It will work or did the utility BUMBLE? Here is an example:

xxx.117.34.5 tunnel ipsec-attributes group

pre-shared-key *.

Thank you

Thomas

Thomas,

I've never used it, but if you want to check the following command on the SAA isue.

more: the execution of the system-config

If you still see asterisks with this command key must then be reinstated. Otherwise, you should see the real keys.

I hope this helps.

Raga

Implementation of the custom permission JSF pages login problem

ADF 11 g

Hello
I created an application of small adf secured using Basic authentication formed and implemented a login JSF custom page as described in the developer's guide the merger and 11 g JDEv manual.

The only difference being that my homepage is protected, which means that the login page is called before you reach the home page, and there is no link connection on the home page.

The home page has a button calling a stubborn workflow.

If I use the original login page, login.html, I log on, access the home page and the button calls the stubborn properly workflow.
However, if I use the JSF login page I login, access the home page but the button does not call the bounded flow taks - there is no error no displayed, its as if the button is more "connected".

Here's the doLogin code in the bean connection

    public String doLogin() {
        byte[] pw = _password.getBytes();
        FacesContext ctx = FacesContext.getCurrentInstance();
        HttpServletRequest request = (HttpServletRequest)ctx.getExternalContext().getRequest();
        CallbackHandler handler = new SimpleCallbackHandler(_username, pw);
        try {
             Subject mySubject = Authentication.login(handler);
             ServletAuthentication.runAs(mySubject, request);
             //String loginUrl = "/adfAuthentication?success_url=/faces" +ctx.getViewRoot().getViewId();
             String loginUrl = "/adfAuthentication?success_url=/faces/main.jspx" ;        
             HttpServletResponse response =
             (HttpServletResponse)ctx.getExternalContext().getResponse();
             sendForward(request, response, loginUrl);
             } catch (FailedLoginException fle) {
             FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR,
                                                 "Incorrect Username or Password",
                                                 "An incorrect Username or Password" + " was specified");
             ctx.addMessage(null, msg);
            } catch (LoginException le) {
                reportUnexpectedLoginError("LoginException", le);
            }
         return null;
     }

I have the impression that I am authenticated but not authorized.
Can someone explain what is happening?

Concerning
Paul

Hello

Try changing

String loginUrl = "/ adfAuthentication?success_url=/faces/main.jspx";

LoginUrl = string ' / adfAuthentication? "success_url = / face/hand;

(without the .jspx at the end).

Pedja

Tunnel from site to site VPN that overlap within the network

Hi all

I need to connect 2 networks via a tunnel VPN site to site. On the one hand, there is a 506th PIX by the termination of the VPN. The other side, I'm not too sure yet.

However, what I know, is that both sides of the tunnel using the exact same IP subnet 192.168.1.0/24.

This creates a problem when I need to define the Routing and the others when it comes to VPN and what traffic should be secure etc.

However, read a lot for the review of CERT. Adv. Cisco PIX and noticed that outside NAT can solve my 'small' problem.

That's all it is said, but I'd really like to see an example of configuration of this or hear from someone who has implemented it.

Anyone?

Steffen

How is it then?

http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800949f1.shtml

VPN concentrator + PIX on LAN-> customers can not reach local servers

Hello

I have a problem wrt. remote access clients coming via a VPN3000 concentrator and trying to access local servers.

For the topology:

The internal network is 10.0.1.0/24. It connects with the outside world, as well as via a PIX DMZ; the PIX has 10.0.1.1 in the internal network.

On the same LAN (internal), I have the VPN concentrator for the inside address 10.0.1.5. It assigns addresses in the 10.0.100.0/24 range to the

VPN client-PCs.

I can sucessfully connect using the VPN client SW to the hub, i.e. remote access clients out addresses

the 10.0.100.0/24 range.

The problem: access from VPN clients to internal network is * not * possible; for example, a customer with 10.0.100.1 cannot connect to

internal to the 10.0.1.28 server.

To my knowledge, this is a routing problem because the server (10.0.1.28) has no idea on how to reach customers in

10.0.100.0/24. The only thing that the server is a default static route pointing to the PIX, i.e. 10.0.1.1.

So I set up a static route on the PIX for 10.0.100.0 pointing to the hub-VPN, that is

Mylan route 10.0.100.0 255.255.255.0 10.0.1.5 1

This does not solve my problem though.

In the PIX logs, I see the entries as follows:

% 3 PIX-106011: deny entering (no xlate) tcp src trainee: 10.0.1.28 (atlas) / 445 intern dst: 10.0.100.1 (pending) 1064

The PIX seems to abandon return packages, i.e. traffic from the server back to the client

To my knowledge, the problem seems to be:

Short traffic VPN - client-> Concentrator VPN-> Server-> PIX - where it gets moved.

My reasoning: the PIX only sees the package back, i.e. the package back from the server to the client - and therefore decreasing the

package because he has not seen the package from the client to the server.

So here are my questions:

(o) how do I configure the PIX that I be connectivity between my remote VPN clients (10.0.100.0/24) and

computers servers on the local network (10.0.1.0/24)?

(o) someone else you have something like this going?

PS: Please note that the first obvious idea, installation of static routes on all machines on the local network is not an option here.

Thank you very much in advance for your help,.

-ewald

Hello, PIX the because can not route traffic on the same interface (prior to version 7.0 anyway), I suggest you two places your hub to the outside with the inside of the legs on a zone demilitarized or (if you can not do a makeover of the network) you remove your pool with 10.0.100.0 - addresses and create a pool with 10.0.1.0 - addresses which is a part of the address space. No, NOT all. A little book that it is not used inside.

Best regards

Robert Maras

Login problem VPN on PIX on the side of the inside of the n/w

Similar Questions

Maybe you are looking for