Login script failed

Similar Questions

• 802. 1 x with the login script

  Hello

  Before you set the 802. 1 x with ISE. Logon user with a script to map the network drive.

  We deployed the 802. 1 x with ip phone and your PC successfully, but the logon script does not work now.

  Whatever measures are necessary to make the login script work?

  ISE:2.1

  switch: 3750 with 12.2 (55) SE10

  PC:Win7 (to connect to the ip phone)

  IP phone: 6921 (connect to switch f 1/0/4)

  Switch configuration is to see more:

  !
  version 12.2
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  no password encryption service
  Service linenumber
  sequence numbers service
  !
  hostname ISESW01
  !
  boot-start-marker
  boot-end-marker
  !
  enable password 7 xxxxxxxxxxxxxxxxxxxxxx
  !
  username password 7 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx
  !
  !
  AAA new-model
  !
  !
  RADIUS AAA server group ISE
  auth-port 1645 10.202.152.91 Server acct-port 1646
  auth-port 1645 10.202.152.92 Server acct-port 1646
  !
  default AAA dot1x ISE authentication group
  AAA authorization network default group ISE
  AAA authorization auth-proxy default group ISE
  accounting AAA periodic update 5
  accounting dot1x default start-stop group AAA ISE
  AAA accounting system by default start-stop group ISE
  !
  !
  AAA server RADIUS Dynamics-author
  customer 10.202.152.91
  customer 10.202.152.92
  !
  AAA - the id of the joint session
  switch 1 supply ws-c3750v2-48ps
  mtu 1500 routing system
  VTP transparent mode
  DHCP excluded-address IP 10.202.21.1 10.202.21.10
  DHCP excluded-address IP 10.202.121.196
  !
  IP dhcp pool testingdhcp
  Network 10.202.19.0 255.255.255.0
  router by default - 10.202.19.1
  10.202.152.21 DNS server
  !
  !
  analysis of IP device
  !
  MLS qos map policed dscp 0 10 18 24 46-8
  MLS qos map cos-dscp 0 8 16 24 32 46 48 56
  MLS qos srr-queue input bandwidth 70 30
  MLS 1 80 90 qos srr-queue input threshold
  priority-queue input bandwidth 2 30 MLS qos srr-queue
  queue threshold 1 MLS qos srr-queue input cos-map 2 3
  queue threshold 1 MLS qos srr-queue input cos-map 3 6 7
  queue threshold 2 MLS qos srr-queue input cos-map 1 4
  queue threshold 1 MLS qos srr-queue input dscp-map 2 24
  queue threshold 1 MLS qos srr-queue input dscp-map 3 48 49 50 51 52 53 54 55
  queue threshold 1 MLS qos srr-queue input dscp-map 3 56 57 58 59 60 61 62 63
  queue threshold 2 MLS qos srr-queue input dscp-map 3 32 33 40 41 42 43 44 45
  -More - mls qos srr-queue input dscp-map 2 3 46 47 threshold queue
  queue threshold cos 1-map of MLS qos srr-queue output 3 4 5
  queue threshold cos 2-map of MLS qos srr-queue output 1 2
  queue threshold 2 cos-MLS qos srr-queue output 2 3 card
  queue threshold cos 2-map of MLS qos srr-queue output 3 6 7
  queue threshold cos 3-map of MLS qos srr-queue output 3 0
  queue threshold 4 cos-MLS qos srr-queue output 3 1 card
  queue threshold 1 dscp-map of MLS qos srr-queue output 3 32 33 40 41 42 43 44 45
  queue threshold 1 dscp-map of MLS qos srr-queue output 3 46 47
  queue threshold 2 dscp-map of MLS qos srr-queue output 1 16 17 18 19 20 21 22 23
  queue threshold 2 dscp-map of MLS qos srr-queue output 1 26 27 28 29 30 31 34 35
  queue threshold 2 dscp-map of MLS qos srr-queue output 1 36 37 38 39
  queue threshold 2 dscp-map of MLS qos srr-queue output 2 24
  queue threshold 2 dscp-map of MLS qos srr-queue output 3 48 49 50 51 52 53 54 55
  queue threshold 2 dscp-map of MLS qos srr-queue output 3 56 57 58 59 60 61 62 63
  queue threshold 3 dscp-map of MLS qos srr-queue output 3 0 1 2 3 4 5 6 7
  queue threshold 4 dscp-map of MLS qos srr-queue output 1 8 9 11 13 15
  queue threshold 4 dscp-map of MLS qos srr-queue output 2 10 12 14
  MLS qos all the output queue 1 1 100 100 50 200 threshold
  MLS qos queue of output 1 all threshold 2 125 125 100 400
  MLS qos queue of output 1 all threshold 3 100 100 100 400
  MLS qos queue of output 1 all 4 60 150 50 200 threshold
  MLS qos all the output queue 1 15 25 40 20 buffers
  MLS qos
  !
  Crypto pki trustpoint TP-self-signed-1210376576
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1210376576
  revocation checking no
  rsakeypair TP-self-signed-1210376576
  !
  !
  TP-self-signed-1210376576 crypto pki certificate chain
  certificate self-signed 01
  xxxxxxxxx
  quit smoking
  Auto qos srnd4
  control-dot1x system-auth
  dot1x critical eapol
  !
  !
  !
  !
  pvst spanning-tree mode
  spanning tree extend id-system
  VLAN spanning tree priority 819 61440
  !
  internal allocation policy of VLAN ascendant
  !
  VLAN 121
  name Voice_Vlan
  !
  VLAN 819
  name 19F_VLAN
  !
  VLAN 888 899
  !
  !
  class-map correspondence AUTOQOS_VOIP_DATA_CLASS
  match ip dscp ef
  class-map correspondence AUTOQOS_DEFAULT_CLASS
  match the name of access by DEFAULT ACL-AUTOQOS group
  class-map correspondence AUTOQOS_VOIP_SIGNAL_CLASS
  match ip dscp cs3
  class-map correspondence AutoQoS-VoIP-RTP-Trust
  match ip dscp ef
  class-map correspondence AutoQoS-VoIP-control-Trust
  match ip dscp cs3 af31
  !
  !
  Policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
  class AUTOQOS_VOIP_DATA_CLASS
  DSCP ef Set
  128000 8000 exceed-action of the police controlled-dscp-transmit
  class AUTOQOS_VOIP_SIGNAL_CLASS
  DSCP Set cs3
  32000 8000 exceed-action of the police controlled-dscp-transmit
  class AUTOQOS_DEFAULT_CLASS
  Set default dscp
  10000000 8000 exceed-action of the police controlled-dscp-transmit
  Policy-map AutoQoS-Police-CiscoPhone
  class AutoQoS-VoIP-RTP-Trust
  DSCP ef Set
  320000 8000 exceed-action of the police controlled-dscp-transmit
  class AutoQoS-VoIP-control-Trust
  DSCP Set cs3
  32000 8000 exceed-action of the police controlled-dscp-transmit
  !
  !
  !
  !

  interface FastEthernet1/0/4
  switchport access vlan 819
  switchport mode access
  switchport voice vlan 121
  authentication event fail following action method
  action of death event authentication server allow voice
  no response from the authentication event action allow vlan 889
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  authentication order dot1x mab
  authentication priority dot1x
  Auto control of the port of authentication
  MAB
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  !

  !
  interface Vlan1
  no ip address
  !
  interface Vlan819
  IP 10.202.19.11 255.255.255.0
  !
  default IP gateway - 10.202.19.1
  IP classless
  IP http server
  IP http secure server
  !
  !
  IP access-list extended by DEFAULT ACL-AUTOQOS
  allow an ip
  IP access-list extended redirection
  deny udp any eq bootpc any eq bootps
  deny udp any any eq bootps
  deny udp any any eq field
  deny ip any host 10.202.154.192
  allow an ip
  !
  !
  SNMP - server RO Cisco123 community
  RADIUS attribute 6 sur-pour-login-auth server
  Server RADIUS attribute 8 include-in-access-req
  RADIUS attribute 25-application access server include
  dead-criteria 30 tent 3 times RADIUS server
  RADIUS-server host 10.202.152.91 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxxx
  RADIUS-server host 10.202.152.92 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxx
  RADIUS vsa server send accounting
  RADIUS vsa server send authentication

  I had a similar problem the workstations where the value "of the computer or user authentication" in the PEAP protocol settings. What is happening is that list DACL that served as of when the computer account has been authenticated restricted just DCs etc, but don't understand the locations required for the login script. It seems that Windows 7 user logon script runs before the dot1x presents the user credentials to the switch.

  Thus, in our case, we have modified the DACL is in place for the computer account to allow access to the locations required for the login script (i.e. the network sharing servers), and everything works.

• Login process failed create the security options dialog

  Login process failed create the dialog box options security can someone help me?

  Hello

  Are you tired? Or why do you post this brief description?

  In any case, I used google and searched the error message and google has provided a lot of visits.
  The solution; Uninstall or disable the Symantec "Norton antivirus/internet security suite scans idle time-out.

  To be honest, I don t use Symantec Antivirus because it takes a lot of resources material I use the free and smart Antivir Ariva.
  It analyzes the complete systems and my laptop runs much faster

• FAILURE - Security Options. Login process failed create the security options dialog.

  I'm running Windows Vista Business Edition 32 bit on a Dell XPS M1330 desktop; 4 GB OF RAM. 120GB HD. I use McAfee Security Center.

  Sometimes, the system hangs with the following symptoms :

  • I'm starting to receive messages "not responding" in an application or a program that I opened, for example when using Firefox or windows explore.
  • The system starts to slow down and works with breaks and stills.
  • Gradually, the system does not meet the clicks or keyboard, but I can move the pointer. I am also unable to bring up the Task Manager (no response to C-A-D)
  • Eventually the screen goes black with the exception of pointer, which moves with the mouse
  • After a few minutes, you receive the following message:

  Title bar: login process failed create the dialog box options security.
  Message text (with X-red): failure - Security Options

  • The only button available is the OK button. When I click on the button, Windows is displayed again, but it is completely insensitive (move the pointer). Wait long enough and repeat the sequence preceding.
  • The only thing I can do is stop hard by dint of power off. When I have the power back and reboot, everything seems back to normal, until the next time.

  I have tried the following options:

  • restarted the system and you press F8. So I tried to run the system restore. But in doing so, I got a different error message:

  Title bar: the disk OS (C :) has errors. )
  Text of the message: Windows has detected corruption on OS (C :) file system. You should check the drive for errors.
  Action line: check the disk for errors

  • I clicked on the above action line and the disk check has started, but after about 20 minutes, it got stuck at one point and didn't move forward despite me waiting for 3 hours.
  • Tired of waiting I finally canceled everything.
  • So I decided to restore my laptop to factory settings. After restoring the system to the factory settings that I was hoping it would work very well, but he worked the same and error message "failure-security option" is new.
  • Now the system not yet properly starts in safe mode.

  I would be grateful if someone from microsoft can help me with this problem that I need my laptop for urgent and important work.

  1. start windows in safe mode, press start and type "msconfig" in the search/run box. go to the services tab, find the 'superfetch' service and uncheck the box next to it. Click OK and restart normally (if you have exactly the same problem, I had - that should fix it).

  2. check in the clean boot state: http://support.microsoft.com/kb/929135

• Login script JSON jqm to need help bbui

  Hello

  A few months ago, I tried to start with bbui get more native objects (like swipe in the menu drop-down).

  The problem is that bbui sucks compared to jqm (kitchensink) my complete app depends on, and the part I am now is connection and registration of a new user of the application.

  This is example code that I use a lot:

  Example of form

  [code]

  [/ code]

  Example of jQuery:

  [code]

  $(function() {})
  $("#JqAjaxForm").submit (function (e) {}

  var b is return ["JqAjaxForm"] ["email"] .value;.
  var c is return ["JqAjaxForm"] ["password"] .value;.

  dataString = $("#JqAjaxForm").serialize ();

  $.ajax({)
  type: 'POST',
  URL: ""http://myserver.com/login.php ", "
  data : dataString,.
  data type: 'json ',.
  success: function (data)
  {

  If (data.usrkey == "undefined") {alert ("user/password incorrect");
  } Else if (data.usrkey == "null") {alert ("user/password incorrect");
  } Else if (data.usrkey == '0') {alert ("user/password incorrect");
  } Else if (data.banned == '1') {alert ("user/password incorrect");
  }
  on the other
  {

  USRID = data.usrid;

  usrid var = data.usrid;

  localStorage.setItem ('userd', usrid);

  Window.Location.assign ("Start.html");

  }

  }

  });

  });
  });

  [/ code]

  what the code, if the json in login.php data is 0 or undefined, it means that your user/pass is incorrect.

  When usr.banned is 1, it means you did something wrong and you're banned from the app

  Otherwise, it will return your username and which will always be greater than 0 then you will get a localstorage (aka connected).

  This code does exactly what is should do... in jquery.

  I tried to mix different versions of jquery and jquery mobile with bbui but it has messed up every little thing.

  And this json/ajax request made in this case only connect, but I use it a lot more.

  As example for user information, submit information, check if you have access to the parties (0/1).

  In any case to long a little more short, jquery does not set well with bbui.

  I am locked out of my application and cannot save a new user because it uses jquery to submit.

  Someone at - it a good example of the above code that does exactly the same thing?

  but works in bbui, OR a jquery lib (mobile) I can use with bbui

  Small update on my side, when I use the zepto (http://zeptojs.com/) plugin, I get the below error:

  ReferenceError: Can't find variable: webworks

  This error I get also when I include any javascript jquery or jqm file

  I forgot to mention, indeed, that I already have those around him.

  my login script works now, jquery 1.9 x was the problem, no problems with 1.8.x

• .dat or .msi in the ThinReg login script?

  When I create a ThinApp, I create an msi file, and sometimes ThinApp creates the .dat rather than the .exe file. I'm a bit puzzled as what to put in my login script that works ThinReg. Can I put \\server\path\xxx.dat or \\server\path\xxx.msi? Or is it important? Thank you.

  You use the exe (No .dat or msi) for ThinReg.

  The MSI file will contain ThinReg itself and that's why he recorded the ThinApp (ThinReg) when the MSI is installed.

  Please see this post on the use of login script ThinReg:

  http://blogs.VMware.com/ThinApp/2008/10/ThinApp-thinreg.html

• VCB snapshot creation failed: Pre custom gel script failed - how to fix?

  On a VM I started getting this error of VCB:

  Error: Another error occurred: failed to create snapshot: gel prior custom script failed.

  I found several other discussions about this, with resolutions of filesystem suspend disabling and reinstalling the VMware Tools.

  The guest is a CentOS 5 VM. He has lots of free space. The LUN has enough free space. I tried to reinstall the VMware tools. I tried to create the script pre-anti-freeze, chmodding to 755, even tried to add a simple script ' exit 0' in so that he actually returned correct status of output. "

  Snapshots fine VM in Virtual Center. I can't turn off the setting to suspend as it is set automatically by Backup Exec and I don't see an option to turn it off. Adding to the config.js appears to have ignored.

  The full command that I use for testing that is generating the error is:

  vc-01 vcbMounter.exe - h u Administrator Pei "mypass" - a uuid:564d7acf-0ecb-d867-8e4f-bbcb1aea6508 - r "C:\TEMP\monitor-22-06-408" t - fullvm m nbd - M 0 f 0

  I have several other CentOS 5 VM that work very well in the VCB.

  Any ideas or other things I can try?

  See this article in KB

  StarWind Software R & D

  http://www.starwindsoftware.com

• The script failed - formcalc

  Hello

  I am very new to LiveCycle Designer, and I get the error message: "Script failed (the language is formcalc;» context is xfa... The error error: syntax near token ' (' on row 3, column 0.)

  I just add some numeric fields. The calculation works fine, but I want to get rid of this, any error message?

  Here is the code I have in the Script Editor:

  Form1. Page2.TotalEnrollment::calculate - (FormCalc, client)

  TotalEnrollment.rawValue = NumericField1.rawValue + NumericField2.rawValue

  This doesn't make any sense I have yet one "(" in my syntax...
  

  Thank you!

  Hello

  With FormCalc, you don't need .rawValue.

  Also that the script is in the object you want to set the value, you can use $ instead of the name of the object.

  Try:

  $ = NumericField1 + NumericField2
  

  Make sure you have not a mistake, as I suspect that this could be the problem.

  Niall

• VERY simple calculation - "Script Failed' unknown value

  Hello people. I'm not new to LCD (I used this product for a period of time to create graphic documents), how ever I am new to use the LCD screen to create documents that make mathematical calculations... This is exactly why I'm having this problem. Sorry grrrrrrr...

  I have a simple document with a few tables/rows. Each line has a value simple condition (if something is checked there is a numeric value), it works fine. What I try to do is just the total value of all the rows in each table, and that the bombs (errors) with "Script Failed (language is formcalc;» context is..) then identifies all the field names as 'unknown '. I'm tempted to test a little differently and I still get this error, in fact I can't get this form to just add to the simple numbers without a similar error.

  Novel I don't know it's me - has been less-than-smart, I didn't belive there is an error with the LCD itself.

  Any direction would be most appreciated. Thank you very much!

  http://www.chnwi.info/test/wellness_scorecard_final.PDF

  Two things:

  1. the sum command has capital S Sum() not sum() is

  (2. There is no space between the sum and the)

  3. When you reference other fields, they are in a different subform that the total amount, so you have to way to the fields. The best way to do this is in the Script Editor, the place the cursor where you want the reference to appear, then hold ctrl and move the cursor over the desired field. The cursor turns into a version V. the mouse when you're on the ground and the correct reference will be written in the script editor.

  4. you can not split the order through two lines... .in all on a single line.

  I have included my modified version. I only did 1 table.

  Paul

• Customize the login scripts

  I have a PHP/MySQL login custom script that sends users to an error page if things go wrong with the server.
  
  Ideally, I would like to change the configuration of Dreamweaver CS3 files, so it's the connection by default whenever I set up a site connection. I can't locate the file/s that create/s login script code and so everyone can someone point me in the right direction would be great!
  
  Thank you
  
  Julie
  

  juli_s wrote:
  > I'm having
  > trouble to locate the file/s what s/create connection script code and if
  > anyone no matter who can point me in the right direction would be great!

  On Windows, this is C:\Program Files\Adobe\Adobe Dreamweaver
  CS3\configuration\Connections\PHP_MySQL\connection_includefile. EDML

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• Mac Labs: ARD login script not working only off 10.11

  I run the laboratory of computer science at the State University.  5 laboratories w / 100 + machines.  We have been a Mac shop all since switching to Intel chips.

  I use the following login for the years script:

  name = "user";

  password = "pword";

  osascript<>

  Tell application "system events".

  hit tab

  strike (character ASCII 8)

  hit tab

  strike (character ASCII 8)

  strike back

  delay 0.5

  hit tab

  combination of keys '$name '.

  hit tab

  delay 0.5

  combination of keys '$password '.

  delay 0.5

  strike back

  strike back

  tell the end

  EXPRESSIONS OF FOLKLORE

  When I send to a machine (with and without SIP) 10.11, I get the following message is displayed in the status field of the task:

  osascript [261:2199] CFPasteboardRef CFPasteboardCreate (CFAllocatorRef, CFStringRef): failed to create aggregate data

  I don't know if the problem lies with ARD admin being 3.8 and 10.11 being 3.8.5 client.  I had similar problems with disparity admin/customer a while back who disappeared when ARD admin has been updated.

  Not being able to connect on my machines 100 + is a deal breaker.  I can't deploy 10.11 nor I can recommend that we buy new machines this year (we replace generally 1/3 each year).

  Someone at - it a script that works in 10.11?

  Hi, solves this problem already? I would be interested in the solution because I have the same problem with my El Cap clients...

  Thanks in advance for your help.

• SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster

  We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is...

  Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS

  Errors on the nodes:

  SQLSetup0008_SQLNODE1_Core (Local)

   Running: InstallSqlAction to the: 4/14/2012 22:56:39

  Installation: sql on target: SQLNODE1

  Waiting for remote setup (s) to prepare

  Remote Setup (s) is ready

  Problem of determining the State of the virtual server for the package: '1' because of the exception of data store:

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 63

  ----------------------------------------------------------

  Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache.

  Source the name of the file: datastore\packageidstatescopecollector.cpp

  Compiler timestamp: Wed Aug 24 13:40:04 2005

  Function name: PackageIdStateScopeCollector::collectProperty

  The source line number: 115

  ----------------------------------------------------------

  dataPathValue is empty

  Cluster functionality detected: SQL_Engine

  Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 130

  ----------------------------------------------------------

  Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: VirtualServerInfo.IPResources

  The source line number: 113

  ----------------------------------------------------------

  Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"}

  Transact package threw an exception.

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  Package first notify: 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  SQLSetup0008_SQLNODE2_Core (Local)

   

  Local configuration can complement

  Running: InstallSqlAction at: 4/2012/14 23:23:57

  Installation: sql on target: SQLNODE2

  Informs the package is ready to start: 0

  Waiting for notification start installation

  Local configuration can begin installation

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp

  Compiler timestamp: Wed Aug 24 13:40:17 2005

  Function name: sqls::RemotePackageInstallerSynch:preInstall

  The source line number: 128

  ---- Context -----------------------------------------------

  SQLs::InstallPackageAction: perform

  SQLs::RemotePackageInstallerSynch:preInstall

  Abandonment of the package: "sql", due to an error from the configuration of the host: 13

  Notify all ready to commit: 13

  Notify all ready to put end to: 13

  Waiting for notification complete installation

  Local configuration can complement

  Packaging return code: 13

  Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false

  Error: The 'InstallSqlAction' Action failed during execution.  Error during execution information:

  Target collection includes the local machine.

  -----------------------------------------------

  Error: The 'UninstallForRS2000Action' Action failed during execution.  Error during execution information:

  Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:

  The condition 'rs has been correctly upgraded level.' returned false.

  Package installation: 'patchRS2000' failed due to a precondition.

  Running: ReportChainingResults at: 4/2012/14 23:24:1

  Error: Action "ReportChainingResults" threw an exception during execution.

  One or more packages could not be installed. See logs for details of the error. : 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\sqlchainingactions.cpp

  Compiler timestamp: 1 Thu Sep 22:23:05 2005

  Name of the function: sqls::ReportChainingResults: perform

  The source line number: 3097

  Please notify.

  Assani

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  Hope this information helps.

• Vista in conflict with security programs? Mega-slow start, ctrl-alt-delete = ' login process failed create the security options dialog»

  Hi all

  Have a laptop HP here with heavy problems! After the connection, it slows right down until it takes at least 5 minutes just to open the start - menu it hangs just with the whirly-circle thing. If I do ctrl-alt-del, the screen goes black and after a few minutes, I get the message "Login failed create the security options dialog» The Task Manager does not open. I managed to slightly improve things by disabling the user account control (miserable thing anyway) - it's just too slow, but now the Task Manager opens about 50% of the time and the other 50%, I get the message a little more lively 'failure - security options '. If I leave the phone that it will sort itself out after about 45 minutes, after which it ends to load every startup process and behaves normally. If I boot in Safe Mode, all right. I also ran virus checks - no nasties - and there is nothing surprising in the event logs.

  After an extensive search on Google, I have established that many people - all users of Vista, surprise, surprise - had the same problem, dating back years, pretty much when Vista is released. (This laptop is perhaps a year old). Some corrections were proposed, but the majority concluded that the deactivation of their safety programs, regardless of what they were, did the job. This laptop is running Windows Defender and TalkTalk Internet Security, provided by F-secure. Disable Windows Defender made a slight improvement in speed. Deactivation of TalkTalk Internet Security returned the laptop to normal operation. I strongly suspect a fundamental conflict between Vista programs and safety - that we must all know that Vista is rather prone to bugs - but why Microsoft hasn't issued a fix for this? I don't want to go around without security. Nor do I want to download a new program of security and have the same thing happen againn weeks down the line. Someone had the same problem or found a permanent solution for it? I am barking the wrong tree here? I'll try uninstalling a few recent Windows updates to see if any of those who triggered the hissing fit.

  Okay, I think that I fixed it. I will post the solution for you all poor users of Vista with the same problem. Corrections of spare is located in the following Vista forum thread:

  Error-message-login-process-has-failed-Create-Security-Options-Dialog

  So after that I've identified the cause was the Internet of TalkTalk security program, I did some messing around in msconfig and reduced to the function FSGKHS, alias F - Secure Gatekeeper Handler Starter. If I disabled this service, everything has worked, and if I booted up with no other process or running services to all others as the stuff of F-Secure (with the exception of group policies which I think is an essential service?), I had the same problem. Certainly FSGKHS. However, I did not know why. Everything I had was a vague notion that maybe it was a key to registry corrupt or something. I don't know why I even thought to this. And if I hate the registry cleaners, I couldn't think of any other way to identify registry problems. So I created a restore point and ran CCleaner. It came with a bunch of registry errors, but none of them were related to a F-Secure or files of TalkTalk. I told CCleaner to remove it anyway and booted up with FSGKHS running, just on the offchance. Whaddya know? He is cured. Don't know why, but it works perfectly normally from start to stop (fingers crossed). I know a lot of people have solved this problem by disabling their safety programs - maybe they had a corruption of the registry too? A kind of strange thing to register/security/Vista. Anyway, go try CCleaner before you reformat your drive hard peeps and let me know if this worked for you.

• Login process failed to produce security options.

  I recently had problems with my computer lock up after sign in and discovered that my wife had downloaded another software antivirus (Symantec's Norton), without removing our old one (Trend Micro PC-Ilyin), so I've disabled symantec and removed trend and symantec enabled again.  Now I can login fine but when I try to open the Task Manager, I get the dialog box "connection failed to produce security options", saying the failure-security options. How can I get my comp. back to normal?

  http://eSupport.trendmicro.com.au/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  Use the tool above to make sure you get out all the remains of the trend of your system.

  And, if necessary, uninstall/reinstall Norton as well:

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Link above is for the Norton Removal Tool.

  See you soon.

  Mick Murphy - Microsoft partner

• Foglight v558 - Script fails with ScriptAbortException: script1001968: java.util.ConcurrentModificationException

  I have changed most of our rules through several Wssf and use a number of rule-level Variables. I got these variables through groovy scripts.

  Recently, I had to change a variable that appears in all the rules.

  This is the script that I have written so far:

  com.quest.nitro.service.sl.interfaces.rule import. *;

  def ruleInfo = "";
  def ruleSvc = server.get ("RuleService");
  def ruleList = ["DBSS - ADH Service status"];
  def varExp = "INST_NAME;
  def varText = "scope.parent_node.mon_instance_name";

  allRules = ruleSvc.getAllRules ();

  for (rule allRules) {}
  ruleName def = rule.getName ();
  def ruleCart = rule.getCartridgeName ();

  If (ruleList.contains (ruleName))
  If (ruleCart.equals ("DB_SQL_Server_UI")) {}
  def ExpressionSet = rule.getExpressions ();
  for (expression in ExpressionSet) {}
  If (expression.getName () .equals ("INST_NAME")) {}
  ExpressionSet.remove (expression);
  ruleInfo += "Removed variable $varExp of $ruleName \n";
  }

  }
  Add a new term
  ExpressionSet.add (rule.createExpression ("INST_NAME", varText));

  rule.setExpressions (ExpressionSet);
  ruleSvc.saveRule (rule);
  ruleInfo += "added $varExp variable $ruleName \n";
  }
  }

  Return ruleInfo;

  The part of the script that adds the variable work consistantly.  The part of the script removes it expresion of level rule fails most of the time with the following error:

  com.quest.nitro.service.sl.interfaces.scripting.ScriptAbortException: script1001968: java.util.ConcurrentModificationException

  I'm still fairly new to groovy and java script, but I gather that when I have to iterate over a collection that is changed in another thread, the iterator survey a java.util.ConcurrentModificationException.  I read that I should look somehow collection synchronization.  Before we go down this rabbit hole, I thought I would just ask here, how should I write this code then it work consistantly?

  This is due to brakes on an object. You can try to break your code into pieces. First of all try and get all the rules in a list that matches your criteria. Call it a refinedRuleList, and then iterate through this refinedRuleList for Expressions and remove them. This gives a try!

  Thank you

  #AJ Aslam