Logitech G13 Advanced Gaming Pad - touch working__

Similar Questions

• Hi my Logitech G13 game controller no longer works since the upgrade to Windows 8 why I do these silly things such that waste money and upgrade.

  I want that my windows 7 back you can keep the money that I paid for the upgrade. I just can't do with all the hassle. and things does not. And problems with Punkbusters.

  http://www.Logitech.com/en-us/support/game-gear/G13-advanced-gameboard?section=downloads&bit=&OSID=14

  The updated driver resolves the problem and my G13 works like a charm on Windows 8. Be sure to download the correct file, x 64 or x 86, depending on your operating system.
  See you soon!
  PS: Don't give up

• Qosmio X 300-pad touch does not work

  Hello, I opened and cleaned my toshiba qosmio X-300-130 and when I turned it on evrything worked fine except my touchpad that it did not work or the buttons, so I reinstalled the driver PAD SEMANTICS, but nothing changed so I reinstalled my WINDOWS 7 64-BIT but once again no change, pls pls help!

  I don't know how to help you. All we can say here is that you should check the connection of cables tochpad and be sure that all three touch pad flat cables are correctly plugged into the Council of touchpad.

• Dv6-6C38TX - pad touch LED?

  Hi guys,.

  Strange thing here... I just noticed that the light under my touch pad is not on... I press a button and turn it off somehow?  This button press to turn it back on?

  Hello

  Based on the fn key and pressing the space bar activate it?

  Kind regards

  DP - K

• Satellite A300 - pad touch dead after update BIOS 2.20

  Hello

  exact model is Satellite A300 PSAGCA-06M01N under Win XP.

  I had a problem with the webcam, and I read in the forum that it can be solved by a BIOS update. so, I advanced and downloaded the latest version of the BIOS on the site of toshiba, especially for my laptop model. It went quite well with no error.

  However when the computer restarts after that the BIOS updated my touchpad no longer works.
  I went to Device Manager and could still see the Synaptics touchpad device and it says "this device is functioning correctly. but its completely dead and will not respond with the 2 keys. before I updated the BIOS I never had any problems with it.

  I tried FN + F9, nothing helps. plugged in a USB mouse and it works without any problem. In fact, when I plugged in the mouse the synaptics software says "Deactivation of the key because of the external pointing device" for the device driver for the touchpad works.

  If I remove the mouse, it will say the touchpad is restored, but it still doesn't work. restarted several times and still the same problem. went into BIOS and chose "default" not still a no go.

  Can someone offer any advice or ideas please?
  I really need the touchpad for the way I use the laptop...

  Hello

  In many cases, the touchpad (pointing device) can be enabled and disabled in the BIOS.
  I think you should check if this option is available in BIOS and if so, check whether it should be enabled.

• Satellite A350D-201 - pad touch and two buttons doen't work

  After updating the BIOS from version 1.6 to 1.8 the two buttons and the touchpad does not work.
  USB mouse works. Pointing device-enable (bios).

  I decided to reinstall Win7, in a time of installation the sensor does not work!
  Disassembled the laptop, I found nothing.

  Help!

  Have you installed the touchpad driver after the installation of Win 7?

  If so, you should also check if the touchpad has not been disabled using FN + F9 keys
  Also recommend that you check the setting in Control Panel-> mouse-> Advanced tab
  Here, you have to go into the advanced settings.
  For all I know, you could turn on and off several options of touchpad and touchpad functionality.

• Pad touch and function Fn + F5 does not work on the Satellite a series

  Hello

  I just install a windows Vista & I have install the driver after download it from the net, but I found this;

  1 - switch between the screen & s-video (fn + f5) does not work but the other work of function (fn)

  2 when I put my finger in the right of the mouse pad you have to scroll the screen & at the bottom of the touchpad, it should scroll left & right on-screen, but it did not work

  So please tell me the solution if it is a problem of driver or program.
  Please give me the direct link

  thinku

  Hello

  What cell phone do you have?

  I imagine that your laptop comes with XP and now want to use it with Vista OS.
  Please note that you should install the Package Toshiba Vista value added to use all the features of the laptop.
  Very important is the pilot of common components and the TOSHIBA Flash Cards.
  The Flashcards provides the Hotkey function and function of pitcher who starts the Hotkey function.
  Please reinstall!

  The additional touchpad functionality must be configured first.
  This can be done in the control panel-> mouse

  Here, you should look for the touchpad settings and able to configure touchpad again scroll areas.

  Good bye

• HP Envy: HP Envy Log with pad touch screen PIN

  How can I get the touchpad to reappear so that I can connect with my PIN? He disappeared without warning. I tried to go into the center of the unit, but I saw no option for the keyboard.

  I think that I had a similar problem with my HP spectrum x 360 13-4132ng, Windows 64-bit 10.
  
  The connection with touchscreen and the PIN is possible but sometimes (often), when I click on the input box to the PIN on the login screen, the PIN-keyboard is displayed for one second, but immediately disappears again. I start the laptop and lift my finger on the touch screen (so that users are visible). Then, I am able to enter my PIN code with the keyboard. But the problem is that it takes about 10 seconds (5-20) to get the keyboard screen appear. I tap on the box with my finger, so that the virtual keyboard (with numbers only) appears, but then half a second later, the keyboard screen disappears again. After trying this several times (tapping in 3 to 10 times the input box), on-screen keyboard, finally, is displayed.

• The satellite A 200 (PSAECE) pad touch and Windows 7

  Hello everyone!

  Recently, I installed Windows 7 RTM, everything works perfectly, however, I have a problem with my touchpad that doesn't seem to work. Windows Update installed a synaptic driver, and it does not work. Furthermore, I installed the value on the package, (despite the fact that all the fn keys already worked) and toshiba Alps and synaptic drivers for vista, which doesn't seem to change anything... Read other posts like this mine, I tried to find any option on the touchpad in the bios, but there is no one there in.

  Thanks a lot for your answers; It drives me crazy! :(

  You can use an external mouse?

• Tecra A10 - pad touch and the keys do not work on Windows 7 x 64

  We have recently done a new install of Windows 7 x 64 on a Toshiba Tecra A10.
  The operating system has taken over most of the drivers, we had to install drivers for the card reader ourselves.

  Our problem is that the touchpad and the buttons work at all.
  The driver displayed in devices such as manager being installed, but that's all. I even installed the control panel of the Alps (Vista x 64) which works very well.
  Have tried the settings "stick and touchpad are automatically invalidated" when you use an external USB mouse, all to nothing done.

  The equipment worked perfectly okay with Windows 7 32 bit installed.

  Is there a fix here?

  Hello

  Maybe it of just a driver issue, I checked the downloads available for Tecra A10 on page of Toshiba and Windows 7 32 bit there is a newer driver available for Windows 7 64 bits do not (no driver). If you use the Vista 64 bit driver

  What you can do is to test the driver for the touchpad for Tecra A11. There is a version more recent for Windows 7 64 bit of Alps Electric so correct. Touchpad driver is not linked so I sure it will also work on your model of m.

  Take a look at the Web of Toshiba Tecra A11 driver site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Qosmio F60 - pad touch and the keys do not work

  I tried to reinstall the control button under additional utility, but there are still problems.

  Hi wilson2022,

  Do you mean the buttons light between the keyboard and the computer laptop screen?

  If so, they are controlled by added value package, but before you reinstall this tool, first remove the old version. Restart the computer, and then install the latest version of package of value added again.

  Also, what OS do you use?

• Satellite C850-1GL win 8 - pad touch, speakers, WiFi no longer works

  Hi all

  My Toshiba suffered a number of problems.
  My touchpad and wifi, speakers no longer work.

  Im running windows 8.
  Tried a restore of the entire system to the factory settings but in blocked to do this.

  Any advice would be much appreciated.

  > Tried a restore of the complete system to the factory settings but in blocked to do this.

  In order to reset the laptop (make recovery) you have two:
  -Recovery disk (or flash memory)
  -HDD recovery

  What have you tried and how?

• hatred sensitve, pad touch, mouse used on this laptop before. Now tried 3 mouse that will not work.

  using hp Pavilion dv6000 (dv6700 on sticker under laptop)
  Windows vista SP 2
  either 8 (cringe)
  different alerts: unknown device (list in the currency under usb Manager)
  all plug and play, but made more Plug and hide.
  Targus (PAUMOO4U)
  Targus (PAUM01U)
  Microsoft Wireless Notebook Optical Mouse 3000

  If your desired rodent has a special driver, go to the manufacturer's website and download it (don't RUN) put a copy on your computer where you can find them, also look at the installation instructions, but do not install yet.

  Make a just in case, Restore Point that really should not be necessary.

  Remove mouse - Safe Mode Boot Device - Manager REMOVE all THE MICE
  Reset. Follow the installation instructions is for rodents.

  She's probably trying to use the old settings of the mouse to the new.

• HP CM1415fnw under Windows 7. I want to scan to PC using the pad touch printer

  I installed the wireless printer, and it communicates perfectly. It will scan USB very well, but I can't find a function to scan the PC unless I work from the PC using the HP software or other TWAIN software. I set up the printer for a friend who is legally blind and not competent computer.  He needs as USER FRIENDLY as it can get! He would like to insert pages in the feeder 'Print to PC' press and do the scan appear on his screen. Is this possible using wireless? If this is not the case, using a wired connection would allow the functionality I'm looking for?

  Hello

  I checked the manual of the product, and it describes 3 General methods of scanning.

  Scan methods
  Conduct of analysis in the following way.
  ● ● ●
  Scanning to a USB key from the control panel of the product.

  Scan from the computer using the HP scanning software

  Scan compatible TWAIN or image Windows (WIA) - software compatible Application

  Does not matter if you use USB or network connection... None of them are 'push' the image of scan to PC:{{class=fontblue}}

  Perhaps we could reflect on a possible way: maybe scan from the front panel for a flash drive, then set up the PC to read and view from the USB to the insertion?

• function disable pad touch

  On the 4 HP ENVY laptop is a feature that deactivates and reactivates the touchpad tapping twice in the upper left corner (where there is a small gray rectangle to indicate the position for the faucet to tun, the touchpad works). What is the procedure to disable this feature? (I find that I often accidentally disable the touchpad accidentally and prefer the feature has been disabled)

  Hello

  Open windows control panel and open Synaptics (you can also access it via the mouse... Settings tab... Settings button).  Option, you must disable is ' "Double tap to turn off the touchpad" - the exact location of this setting may vary according to the Synaptics version you have and to some extent the material.  An example of its location in Synaptics 8.1 can be seen in the picture below - just remove the check mark highlighted, click Close, then click on apply.

  

  Kind regards

  DP - K