Looking for 64-bit Windows 7 for old PSC 2210 all-in-one drivers

Similar Questions

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Download the software to use for HP PSC 1600 all in one for Windows 7 64-bit full version

  HP P-7 1003 wb desktop, windows 7 64 bit. New computer.

  I want to use my HP PSC 1600 all-in-one printer, but the software disk is for XP.

  I see a complete solution software downloads and driver for XP and Vista only. Thought about trying to install the disc in compatibility and then update.  Would rather download it from the hp site. Can someone help me pin point one to use. Thank you!

  Hello

  Setup of full software functionality for Windows 7 can be downloaded from the page on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=390328&sw_lang=

  Kind regards

  DP - K

• Windows 7 includes drivers for HP PSC 1410 all-in-one?

  I am about to replace my Office Tower (currently Windows XP) for one, with Windows 7 pro is installed.  I don't have a disk for the drivers for my printer PSC 1410 All-in-one.  Are they included in Windows 7 where can I download the free after plugging in the new Tower?

  Hello

  You can download the drivers from the followung link:

  Be sure you do not connect USB until the installation invites you to do so.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=441115&sw_lang=

• base software for hp psc 1350 all-in-one

  I bought this printer (hp psc 1350 all-in-one) second hand. My Mac Mini (OSXv10.9.4) downloaded automatically the driver.

  What site can I download the software Basic (and advanced) for this printer?

  JoachimChristianReuter

  Hi @JoachimChristia

  I can help you with your 1350 PSC and your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• HP PSC 1510 all-in-one: ink cartridge for HP PSC 1510 all-in-ONE - no dealers found

  Hello

  I am looking for black HP 92 (C9362W), but your body just says there are no resellers found. Is - this saying that I can not find this cartridge can? If Yes, what ink cartridge can use HP PSC 1510 all-in-one model?

  Thank you

  Erika

  Hello

  Please try (Canada):

  http://www.shopbot.ca/pp-HP-C9362WC-compatible-price-133571.html

  http://www.shopbot.ca/pp-HP-C9362WC-HP-price-35399.html

  http://www.myprintershop.ca/HP-c9362w-92-ink-inkjet-cartridge-black.html

  Kind regards.

• HP psc 2110: a pulse mode, nothing works well in this mode for my psc 2110 all-in-one.

  Get this second puosating soundevery, and the printer is frozen.  In the past I have reset in unplugignthe power and then hoding the arrow buttons cancel and right and the pluging in the power sometimes it works.

  Hello @johnny1936,

  Welcome to the Forums of HP Support!

  I understand that the printer HP PSC 2110 all-in-one is frozen and making a frequent pulsing noise. I would like to help you to solve this problem today. Currently, there is probably a problem with your product, power or a Firmware programming problem occurring within your printer. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Check of power:

  Please connect your all-in-one PSC directly into the wall outlet for power. Power strips and surge protectors can cause your printer for lack of power and will not work properly. Once your printer is plugged directly into the wall outlet test your printer to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: Power Reset:

  1. With your printe r WE, please unplug the power cable from the back of your printer
  2. The power cord unplugged for 1 minute
  3. After 1 minute the back power cable plug in
  4. Your printer should start up on its own

  Once the printer lights please test your product in order to confirm that the problem has been resolved. If the problem persists, your product may experience a failure of Firmware. The Firmware is the internal "brain" of your printer. It determines what your printer is and how your printer it. If the firmware is corrupted in your printer, it may cause performance problems. Normally, I would have you update the Firmware on your printer. If the problem persists after the update is complete, will allow us to complete a programming reset the printer. However, due to the age of your printer there is no Firmware updates or resets the programming. Therefore, a replacement product may be necessary if this problem persists.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if you see all the solid or flashing lights or message board on your printers. I look forward to hear from you!

• power cord for hp psc 1315 all-in-one

  where can I find a power cord for my printer. I have a hp psc 1315 all-in-one

  Search you the Web?

  https://search.Yahoo.com/search?EI=UTF-8&FR=ytff1-GL-Gen1&p=HP%20psc%201315%20Power%20cord&type=

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• in Windows 7 How to check on HP PSC 2210 all-in-one ink levels?

  With Win 7 drivers (and), what is the way to check the ink level in a PSC 2210?

  Thank you!

  [Personal information] HE DIDN'T THERE HAS NO HP PRINT DRIVERS ALLOWED THE WINDOWS PLATFORM 7!  No, natta!

  Installation of the printer software in Windows 7 for wired USB (to READ)

  http://support.HP.com/us-en/document/c01796879

  'Introduction '.

  The drivers for your HP product are already included in the new Windows 7 operating system. You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. »

• Toolbox for hp psc 12010 all in one for windows 7

  Hello

  I am not able to get the Toolkit upwards and running to check ink etc. for windows 7, it was in vista and XP, but a new computer laptop running windows 7 64 bit, I can't locate, any help would be great.

  Hensje

  Hey hensje,

  You see the icon in your taskbar? You receive errors on the PC?

  My recommendation would be to download the most comprehensive software on features available here:

  http://WWW8.HP.com/us/en/support-drivers.html

  Using your printer model and follows the drivers and downloads section select your operating system and you can find the software.

  I hope this helps!

• How to change the settings for color for HP PSC 1350 all-in-one printer

  HP psc 1350

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and the black writing all go faded. How can I change the color settings, so it comes out better?

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and
  Black writing all going faded. How can I change the color settings, so it comes out better?

  ================================
  Sounds like a bad printer cartridge or possibly a
  ... have printer problem you checked with the help of HP?

  Examples of documents Support HP:

  Colors on the Copies are incorrect
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00712305&cc=us&LC=en&DLC=en&product=306888&tmp_track_link=ot_search

  Solving print quality problems
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpu04822&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN#N388

  I was wondering are these reloaded cartridges? I tried
  in my old model HP and it still wouldn't print.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Advances of paper but will not print using Windows XP, computer HP Pavilion DV6000 CTO laptop and HP PSC 2210 all in one with USB

  Communication takes place properly between the printer and the computer.

  Paper advance but not printing on the page.

  Printer copies fine.

  Pilots are underway.

  Help, please!

  Hi GraceWolf,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

  Hello!  I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE .  My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)

  Hello

  HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.

  You can follow the following document which lists no available workaround solution and the limitation of the provided solution:

  http://support.HP.com/us-en/document/c04740294

  Shlomi