Loops of startup Boot VMware 5.5.0 on F2 and F11 line display

Similar Questions

• 2008-2009 iMac and vertical lines endless boot loop

  My father has an iMac from 2008-2009 and it has been fine.

  However yesterday it suddenly developed vertical lines on the screen (see below). These lines seem to be 'above' the Apple logo. Unfortunately I can not access the info from the computer

  The Mac is stuck in an endless loop of startup where it never gets beyond the Apple logo and turn the circle loading.

  I started using the option key pressed and tried to the recovery for the boot partition. This again goes to the Apple logo and the rotating circle gray until he says: "If you want to continue in English press the return key" what I'm doing and then nothing (the circle stops spinning). Same thing happens when the safe boot mode.

  I also tried to boot from the recovery drive (separate USB) and nothing... Fortunately, I can access its backups like he always its data.

  I also tried the mode via Firewire to my laptop and disk target hard iMac mount (although the Firewire icon appears on the screen of the iMac).

  I also tried re-creation of the AMFR2 and MSC.

  My guess is that it's a failure of motherboard somewhere as it seems beyond normal graphics card. For some reason any my store does not have engineering appointments at the moment, so cannot take it.

  Is the consensus, that it is a dead iMac? Thank you

  

  (Note the "burrs" on screen is from my phone, not on the iMac!)

  Hi, Steve Hayes1,.

  I had one come in the other week with these lines - GPU issue. Replaced it and worked like a charm.

  With respect to the infinite loop, try to start from an external drive and load an operating system. Should I still do the endless loop?

  Kind regards

  BleverCastard.

• Pavilion dv6636 stuck in a reboot loop with no boot

  Hello

  I have a Pavilion dv6636 purchased on Oct / 2007 which saw a reboot loop with no boot. By pressing the Start button, I can see the hood leds on, power on (as well as the port for illuminated around blue AC adapter), HD led being turned on once and can hear the pilot DVD is powered and the fan turns, then, after about 10 seconds (while the screen is always black), he stops, remains off for 5 sec , then restarts, stuck in this loop. Experiences I've already done:
  -hard reset
  -reset of memory
  -stable memory locations
  -exchanged memories
  -started with memories (sounded a beep as expected)
  -had started with HD (continued with the same symptoms)
  -F8 or F2 keys pressed during startup (black screen and continued with the same symptoms)
  -F10 key during startup (by pressing F10, it does not shut down as usually does, but rest died, with black screen and rotation of the fan)
  -external monitor plugged in when you start (black screen and continued with the same symptoms)

  Same question occurred in about 4 months ago, but at that time, after break of a week I tried to start and has been a success. Not at the moment.

  Please, any thoughts of what could be the problem?

  Thank you

  Hello Emmanuelle,

  sounded pretty good!

  I got and my laptop is working normally after failed BIOS by following the steps you suggested.

  Now, I have updated the BIOS by the F32 (current release) version and is running successfully.

  Very well.  Thanks about.

• How can I start my computer when ive zip produced the startup boot file

  How can I start my hp ive filed zip the startup boot file and it cannot open it to start, whats my options now

  I have some compressed files and the boot of boot file was there and now it used or cannot open the compressed files to get started

• Loop of startup repair after vista update on 15-04-09

  .post a {text-decoration: underline ;}}

  Hello

  I hope someone here can help me.  I tried Googling for solutions, but after having tried everything without success, I'm bringing my problem here.

  I had gone through the internet when the program to close unexpectedly.   After trying to restart my laptop Dell 1720 (Windows Vista Home Premium), I went to bed after seeing the stage 2/3 update on the screen. It shows, in the morning, he can not start and gives me the ability to startup repair. After that, it is said that it cannot repair this computer automatically. Details of the problem are the following:
  Startup Repair V2
  AutoFailover
  6.0.6000.16386.6.0.6001.18000
  Bad driver
  WrpRepair

  I tried to restore to previous restore points (all tell me there's a missing file, error code 0 x 80070002), safe mode, last known good configuration and I end up in the same loop of startup repair. I have not installed recent programs, drivers and devices.  I am depressed and want to avoid going back to a factory installation since I've had this laptop for a year and have a ton of files and programs.  Anyone with any suggestions would be greatly appreciated.

  ETA: I also run chkdsk (no errors found) and sfc/scannow (Windows Resource Protection cannot run task or something like that).

  In fact, my problem has been able to start Windows Vista after the last update (14/04/09) install.  The error code came when I tried to restore my system to my restore points.  Finally I ended up taking my hd to access my data.  Then I tried to reinstall Vista from Dell provided and had problems reinstall drive to do so (hung up END INSTALLATION).  A call to Dell support had me change some of my BIOS settings and finally managed to get Vista installed.  Now, I'm in the painful process of restoring all my programs and personal data.  This time, I created a partition for the operating system and a separate for all my photos, music, etc. so I don't have this problem of losing all my data the next time the fact once again Vista (and it will be!  I already lived 2 BSOD since reinstalling 2 days ago!)  So, there was no solution to my original post.  Good luck to everyone else who has the same problem with the Vista updates.

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.

• BlackBerry Curve 8900 smartphones hangs at startup / boot with window Application permissions

  Hi all

  As the title suggests, I installed the soft Color ID trial last week and he had run no problem, but yesterday it restarts and starts, it displays the desktop and it also displays the window from the Application of the permissions, as shown below, as soon as it starts.

  He will not allow or deny, my scroll button will not move the cursor, no response from all the keys outside the SHIFT key (which displays the icon of the CAPS in the upper right), and the same goes for the ALT key. It is a fairly new phone after my 8900 has been replaced. I tried to remove the battery and memory card, and a soft reset (ALT CAP LED) simply restarts tender BB, on which the app permissions window comes up directly at startup.

  Anyone can throw some light on this issue please? I'm about to go back to my carrier to replace another.

  Thank you and best regards,

  Lucky

  

  Morning, I just had the same thing happened to me after installing new updates. 23:00 23.

  I removed the battery to reboot and press and hold the ESC key until it finished reboot.

  This allows you to restart in safe mode and remove the colorid from your phone.

  Now, the only problem I encounter is that I can them to reboot on safe mode, it get hung up on the provider screen which always brings me to restart in safe mode.  Now I use my bb in safe mode

  looking for a solution for the provider to hang up.  I hope this helps.

• If I install 10.11.6 on my iMac I will be able to boot from an external hard drive with and OS earlier?

  If I install 10.11.6 on my iMac (model identifier: iMac12, 2 name of the processor: Intel Core i5 speed processor: 3.1 GHz)

  will I be able to boot from a drive external firewire with and the older operating system? Or El Capitan will not allow this as I said can occur. Can't risk a "pourrait".

  Thank you

  There should be no problem. Your iMac is come with Snow Leopard as well as or any subsequent OS should work. Note however, that once started from SL, your interior with El Capitan would be is no longer recognized as a boot device in the preferences > startup disk because Snow Leopard does not have logical volume by car Group organization. You need to restart with the Option key pressed down, calling the Boot Manager.

  If you have problems, you might consider to make the connection via the USB port.

• you want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Daul Boot Windows XP PRO sp3 and WIN7

  I want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Hello

  Access the link that has a video on how to set up a configuration to dual-boot between Windows XP and Windows 7: http://www.microsoft.com/showcase/en/us/details/ae3108ed-a8a1-4ba3-8698-01b8cedd2cf4

  Here's a few that has information on multiboot: can I have multiple operating systems on my computer (multiboot)? : http://windows.microsoft.com/en-US/windows7/Can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  Install multiple operating systems (multiboot): http://windows.microsoft.com/en-US/windows7/Install-more-than-one-operating-system-multiboot

• VMware Fusion has encountered an error and has stopped Windows.

  Summary:

  I started experiencing this problem in November and was beaten on that since including using the VMware support and Apple support.

  Full of the message in the virtual machine window:

  = VMware Fusion has encountered an error and has stopped

  = bottom of Windows.

  ====

  = Click on restart Windows to start Windows again.  Click report for

  = collect and request the support of VMware.

  ====

  = < ignore > < report... > < Windows restart >

  By clicking < report... > generates the report

  Clicking on < reboot Windows > hangs the system.

  Various VMware Fusion, Virtual Machine commands do nothing.

  Again, only way I found to get there is to Apple, Force Quit of VMware Fusion.

  Two systems in question, iMac and MacBook.

  Familiar to anyone else?

  Details: =.

  The two systems were very well work well on several years.

  Status of starting point was.

  -iMac and MacBook running VMware without any problems for several years.

  -This includes several updates to Mac OS and VMware Fusion.

  -OS X 10.9.5 on both systems with the latest upgrades.

  -VMware Fusion 6 on all systems with the latest upgrades.

  -Virtual Machines on two almost identical systems - Windows 7, all derivatives of a VM database.

  
  

  Problem started only on iMac.

  
  

  In weeks, with the encouragement of support VMware and Apple have updated to Yosemite, installed VMware Fusion 7 and built Windows 8.1 scratch machines.

  
  

  Problem now happening on both systems with MacBook, stay alive for about 15 minutes and iMac may be several hours.

  Any ideas appreciated.

  Thank you.

  Paul

  In summary...

  This problem was initially detected on iMac and MacBook:

  Mavericks

  Fusion 6.x

  Windows 7

  The ultimate resolution iMac and MacBook:

  Yosemite

  Fusion 7.1.1

  Windows 8.1

  Details of the way pick up what 7.1.0 merger was in place for the ultimate resolution in the chat messages.

• VMware converter 5.5 Update 1 and target host is 5.0.0 - is a known problem observed during execution of this?

  I intend to use vmware converter 5.5 update 1 and target host is 5.0.0.

  someone can confirm if there is any known problem observed during execution, it is?

  Welcome to the community,

  According to the Matrices of the interoperability of products VMware Converter 5.5 supports ESXi 4.0 and versions later, you shouldn't have issues related to the ESXi version you are using.

  André

• Problem: ping is not knit VMware on another machine host physics and vice versa

  My host OS is windows XP SP3, and I stop the firewall.

  My VmWare OS is windows XP SP3, and I stop the firewall.

  The comments by using the bridge connection.

  I can't ping from the VmWare Machine to another physical PC / machine in the same network and vice versa.

  The ping works properly from the VmWare Machine to the host machine and vice versa.

  ========================

  On another system, the host operating system is windows XP SP2 and the VmWare OS is windows XP SP2.

  I also stop the firewall and comments using connection-bridge.

  On this system, the ping works in both directions.

  What is the problem?

  Welcome to the forums!

  Thanks for posting ' ipconfig/all' of the host AND the guest.

  Make sure that it is not a hardware based firewall and NVidea NIC have.

  Disable any product like Norton etc. additional security during the test.

  AWo
  VCP / VMware vEXPERT 2009

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• join two tables and results to display checkboxes checked... loop david powers please?

  Summary

  two tables:

  Table 1 categories

  Table 2A categories that someone has selected

  HTML form that updates the user's data:

  form should show all the options in the category dynamically in table 1

  and also to display the check box of the category as controlled dynamically if the person chose by table 2

  The nuts and bolts

  Attempt 1

  My sql:

  SELECT cat.id, cat.category, mcat.category as mcategory

  THE CAT of categories, members_categories mcat

  WHERE mcat.member_id = ' "." $_GET ['id']. »"

  ORDER BY category ASC

  (run on its own, all categories of table 1 are shown twice and the results of table 2 is a total cluster.)

  area of the form with checkboxes:

  <? PHP {? >}

  < input <? PHP if (!) ((strcmp($row_rsCategories['mcategory'],$row_rsCategories['id'])))) {echo ' checked =------'checked\' ' ;}?} > name = "category []" type = "checkbox" value = "<?" PHP echo $row_rsCategories ['id'];? ">" / > <? PHP echo $row_rsCategories ['category'];? > < br / >

  <? PHP} while ($row_rsCategories = mysql_fetch_assoc ($rsCategories));? >

  what I have here results:

  all categories displayed twice with selected categories of table 2 verified = by the results of sql when running alone

  Attempt 2

  My sql:

  SELECT cat.id, cat.category, mcat.category as mcategory

  CAT categories

  LEFT JOIN members_categories mcat WE mcat.category = cat.id

  WHERE mcat.member_id = ' "." $_GET ['id']. »"

  ORDER BY category ASC

  (run on its own, all categories of table 1 who have a match in the table 2 and none of the other in table 1 shows)

  area of the form with checkboxes:

  even the first attempt

  what I have here results:

  all categories selected in table 2 shows and checked, and no other choices of table 1 = by the results of sql when running alone

  Attempt 3

  My sql:

  SELECT cat.id, cat.category, mcat.category as mcategory

  THE CAT of categories, members_categories mcat

  WHERE mcat.member_id = ' "." $_GET ['id']. »"

  GROUP BY cat.id

  ORDER BY category ASC

  (running his own, all the choices in the category of table 1 are displayed, however, the mcategory column displays the lowest category numbered (same one) against all of these options rather then correspond to their.)

  area of the form with checkboxes:

  even the first attempt

  what I have here results:

  all choice of category in table 1 are displayed, however, only the first category in table 2 (which in this case is the lowest number) is marked as checked with the checkboxe, even if there is more then one category in table 2 = by the results of sql when running alone

  so, can anyone help?  I'm just banging my head against the wall here is something missing that should be obvious, because the sql is not giving me what I need to work with the form in a loop region.  Perhaps another approach should be taken and I have change the loop as well, but I think that this can be resolved with the sql.  Thanks in advance.

  Well, you can use two separate sql queries...

  one with the names of the categories

  and the second nested with the loop that references the id of category in table 1 to pair with table 2

• Caught in a loop of Vista boot

  My better half has used my laptop and now it does not start at the top. It is a screen that says, "installing windows update 3/3" stays there for a few minutes and then restarts the same screen. It will continue in this loop without having to open on the desktop. Any ideas on how to cross or to solve the problem would be appreciated. THX.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your falls into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer starts and restarts in an infinite loop at startup.

  Received this e-mail from Comcast around 2 April 2013 stating my computer may have a 'bot '. This function constant guard of Comcast. On 5 April, my computer started this start and restart * in an infinite loop. I took the computer manufacturer and all wiped out settings. Comcast removed free Norton antivirus and replaced by Webroot. When the infinite loop finally stops, I just leave the computer on and log off because if I stop, it will begin to restart in an endless loop. I used MicroSoft's analysis and Webroot finds no Malware since I restored it to the constructor parameter. I don't understand??? It does only as long as my wireless light on my laptop. If I boot my computer and disable immediately any connection to the internet, there are no endless loop. I get the desktop to the top and turn on the wireless on my laptop and the computer begins to restart. My daughter uses her Tablet without any problem the same modem wireless. I always get this duplication of constant guard of Comcast email. I sent email them back and ask them if they are sent, and if it was a fake, and their response was like they didn't know what I was asking. Knuckleheads! I am lucky to be online now. He ran into an infinite loop, start and restart hours today. Help!

  Hi Michell,

  1. don't you make changes to the computer before the show?
  2. What do you mean by "I have always received this e-mail from duplication of constant guard of Comcast?

  Method 1: I suggest to disable automatic reboot and then check if the problem persists.

  (Including safe mode) advanced startup options (disable automatic reboot system error)

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Method 2: I would say too you will observer event logs to check what is causing the problem.

  Open event viewer
  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-in/Windows7/what-information-appears-in-event-logs-event-viewer

  Post us the results once you try the steps above.