Loss of connection J4680

Similar Questions

• Loss intermittent connectivity... Airport express router or modem problem?

  Airport express intermittent loss of connectivity?

  Not much information to go here.

  Please provide at least the following details:

  • What exact model of the AirPort Express model do you have?
  • What is an intermittent loss of connectivity? The Express, iPhone, another thing?
  • This working before and just started happening OR if this has always been a problem?
  • Did you do the upgrades of firmware or software recently, when this started to happen?
  • What have you tried so far, to solve this problem?

• Loss of connectivity

  Loss of connection to the internet even if the other computer in our home group has connection

  Hello

  1. what version of Windows are you using?

  2. you receive an error message?

  3. have you made changes on the computer before this problem?

  Please visit the following link.

  Wi - Fi and in Windows network connection issues. http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I suggest you to respond with more information to help you best.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem

• Loss of connectivity to storage device

  It seems that I get one of them at least once a day.  A few times the data store is unknown and other times told me the name of servers.  I have 4 servers in my cluster, all Dell and an EqualLogic iSCSI SAN.  I'm really at a loss about why it continues to be.

  Loss of connectivity to storage device

  NAA.6090a028d0d00181588b241d3c7352b1. road

  vmhba33:C0:T25:l0 is down. Affected

  data warehouses: unknown.

  error

  2009-09-20 14:47:02

  Hi Chris:

  Make sure that you have configured according to the PDF attached things EQL. There have been some changes of VI3.5 regarding the iSCSI configuration and initiator software was completely re-written in vSphere. For example, multiple paths is a little different, and they recommend you actually have a vmkernel port for each physical NIC and that substitute you the failover parameters. You are or ESX servers can be remove connections that the volume rational access EQL moving to different Eth interfaces on the controller (just a thought). This is explained in the document.

  There is also a video cool tech that goes along with the document. http://www.EqualLogic.com/ResourceCenter/video.aspx?ID=8455

  Let me know if it helps!

  Dave

• Problem of PIX - loss of connectivity

  We are expeiencing that a very strange problem and any ideas would be appreciated. Here's the scenario, then I will describe the problem.

  Store #1

  Computer = 192.168.4.11 XP connects to

  ADTRAN router = 192.168.4.1 connects to

  SBC 64 k frame

  Ministry of the Interior WAN router = 192.168.0.1 with a gateway of last resort = 192.168.0.90

  which is the address of the pix that sends all internet traffic to the 64.x.x.x (external) address

  All the store suddenly can not access the internet. However, it can access other shops and HO without any problem. When I try to make a ping or use IE at the store, it resolves the address, but a few times out.

  In the pix, there is the following line to take all internet traffic in the stores and will forward it to the external side of the pix and on the internet

  Route 192.168.0.0 255.255.0.0 64.x.x.x 1

  As I said this has worked fine until today. We are at a loss.

  Help, please!

  Let's see if we can help you.

  The declaration of the route that you have shared with us doesn't seem right.

  Most likely, your itinerary records should look like this:

  route 0.0.0.0 0.0.0.0 64.x.x.x 1<--- tells="" the="" pix="" to="" use="" the="" outside="" network="" as="" gateway="" of="" last="">

  Route 192.168.4.0 255.255.255.0 192.168.0.1<--- tells="" the="" pix="" that="" the="" 192.168.4.0="" exists="" on="" the="" inside="">

  Does make sense?

  You would have additional road statements for other internal networks pointing a device inside like 192.168.0.1 router WAN HO for the Pix knows how to route packets to them.

  Maybe you can share with us the statement "see the road" so we can help you determine if this is indeed the cause.

  Thank you

  Peter

• Loss of connectivity after reboot B200M4/ESXi6

  I've been hitting my head against the wall for long enough, so I hope someone can shed some light on where things have gone so badly.

  I recently deployed a UCS environment consisting of the following:

  • 5108 w / blades M4 5xB200
  • 2 x 6248 (2.2 (5A))
  • EMC is 5200 (directly connected iSCSI)
  • vSphere to 6u1
  • • ESXi (custom image Cisco) 6u1a with the patch KB2137546 and enic 2.1.2.71

  The FIs uplink to a pair of 3850 s (bunk).

  The hosts and the virtual machines have been intermittent connectivity problems and poor performance.  Constantly, if I reboot the host, ESXi management connectivity is lost until I have reset within ESXi management network.

  On the side of vSphere, I have a pair of vmnic on the management, but also the other production VLAN VLAN and a pair of vmnic for iSCSI.  A standard vSwitch for traffic MGMT and production (aggregation based on the Port ID) and a second standard vSwitch for iSCSI (no grouping) traffic.

  I tried a number of things to troubleshoot and resolve the problem. Recently, I discovered the crucial question with 2.2(5a) and performance on the B200 M4 blades.  I upgraded the software to 2.2(5b) this past weekend with no resolution.

  At this point, if I reboot a host with two vmnic on the vSwitch. Mgmt, the host will have NO connectivity Mgmt.  If I reset the management network, it responds to the pings.  If I remove a vmnic and a reboot, just restarts happy, albeit without redundancy.

  If I let the two vmnic on the vSwitch Mgmt & reboot, no connectivity.  But if I disable one of the network adapters in the UCS Manager, he starts to respond to pings.  As soon as I re - activate the NETWORK card in UCSM, pings are deleted.

  So I am at a loss.  Any idea?  Thank you

  Greetings.

  Looks like you can hit https://tools.cisco.com/bugsearch/bug/CSCuv00089/?reffering_site=dumpcr

  You can open a tac case to confirm.  If this is the problem, then an upgrade on 2.25 c or more is resolved.

  Thank you

  Kirk...

• PIX 501 PPPoE w / static NAT loss of connectivity

  I have a {should} installation very simple. PIX 501 with PPPoE on the external interface, 3 inside customers using PAT and 1 inside the client I am trying to use an address mapping static on permit communications with this host from the outside using a particular service. I did a lot of these before where there was an ADSL router in front of the PIX, but this is the first where I've used the PIX as the PPPoE client. When I use the static NAT for the single host it loses all connectivity beyond the PIX outside interface. When I get rid of the static mapping, through PAT very well. I spent many hours troubleshooting and control a lot of obvious things, but I am at a loss right now... unless it could be a problem with the IP address that has been assigned by the ISP for use with static NAT. Any thoughts on this would be greatly appreciated.

  Thank you

  Sorry, in your case that static would look like this because of the dynamic IP.

  static (inside, outside) 23 interface 10.1.1.1 23 netmask 255.255.255.255

  Daniel

• Loss of connectivity after cloning, or move a virtual machine, 4.1

  Nice day

  I have a cluster that contains the servers Fujitsu and Dell blades. The cluster has EVC. When I try to clone or move from one of the guests at one of the hosts Dell Fujitsu I lose network connectivity. The network cards are always present in the virtual machine, but I can't ping anything successfully. This happens on both CentOS 5.x, Windows Server 2003 and Windows Server 2008, I him have not tested on something else.

  What I did is to remove the network adapters and then add new ones. This example gets the machine virtual back up and running. However, this workaround solution does not bode well when the handle moving VMs DRS between these hosts and for any migration or cloning.

  I am not sure of the cause of this problem. My hope is to be able to move between the 2 different brands without having to reconfigure and restart each virtual computer.

  As I understand it, is that a problem in the loss of network connectivity for the VM created on ESX 3.5 or any virtual machine that also includes a new virtual machine created on ESX 4.1 with version 7 of material.

  If the VM is affected by this problem, then you may want to disable the switch Port security to check if this helps because once the virtual machine is migrated probably MAC address changes.

  If this problem occurs on virtual machines that were created on ESX 3.5 and then update the VMware tools, put off the virtual computer and upgrade the hardware to 7 version.

  Hope this helps

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Concerning

  Arun

  VCP3, VCP4, HPCP, HP UX CSA

  http://KB.VMware.com/

• Loss of connection with iCloud

  Whenever I login I have to re - connect with my iCloud - suggestions, no matter who?

  I assume you mean iCloud.com website?  How are you internet connection otherwise?

• MainStage - loss of connectivity environment performance

  Hi guys,.

  I seem to lose connectivity between my midi controller (m-audio code 61) and Mainstage environment performance. I lost sound and the warning message on the Mainstage saying that the midi controller is no longer available. Currently, I connect via the USB port, which also fuels the midi controller. I have to disconnect and reconnect the USB cable on the midi controller or laptop and then it seems to work again. Any ideas on how to solve this problem?

  Try another USB cable. A premium quality cable may be the solution. The connectors tend to have a tighter fit. Another alternative is to use a power supply and a USB MIDI cable, or connect via a cable to your audio interface MIDI, if it has a MIDI.

• Loss of connection wifi on iPhone and iPad Mini

  A recent issue, it's that I keep losing wifi connection at the same time on my iPhone and iPad Mini, but not on my MacBook Pro.  All three are in the same room with Time Machine and SB 6141 modem.  Any suggestions?

  Is the unstable WiFi other places too? IOW if you go to a coffee - can the iDevices contain a wifi connection?

• Problem with TC loss of connection to the modem cable

  I have a TC of 2 TB which is connected to my ISP provided by cable modem. It worked fine for 3 months after the installation in December, but now all of a sudden it will lose its connection to the modem and we lose our wireless internet. We have replaced the modem cable and it does not solve the problem. I have to reset the TC 2 - 3 times a day. Nothing else has changed recently with regard to the network set up. that only changes were to specific devices that use the wifi connection, and this was always something changing, depending on the devices we use. Any thoughts? I'm not a savvy person tech, BTW.

  We need to ask a few questions in order to learn more on what the possible cause of the problem might be.  Please be patient with this. Thank you.

  What is the number and the model of the modem you are using right now?  We ask because some modems work better than others with Apple routers, and even if you have changed the modem, it could still be a model who does not get along well with the Apple router... or... you could say that the router from Apple does not get along well with the modem.

  How old is the TC? We ask because the life expectancy, on average, a time capsule is about 3 years.  After that, they tend to start losing connections to an ever-increasing rate.

  Who is your provider of Internet (ISP) Service?  We ask because most suppliers are in the active process of implementation of a new type of connection called IPv6 in their systems... and despite ISPS claiming that their system changes should cause no difficulties connection or interruptions system... which doesn't seem to be the case at all.

  We have seen an unusual number of reports from users who suddenly have problems with their ISP connection, when things were very well for many months before. That points directly to the IPv6 changes that ISPS are doing as the culprit. In some cases, there could be way to work around the problem, and in some cases, there is nothing to do but wait as the ISP to complete their changes and be everything to speed.

• Bluetooth, loss of connection, reconnect

  I have a Photosmart C5580 I used for a few years without problem.  I have connected to my computer using bluetooth.  My computer is a MacBook Pro OS 10.6.8.  My printer has recently lost the connection.  When I try to connect I get a message "impossible for the match".  I tried using the options of different password with no seccess.  I downloaded all the updates for my printer and uninstalled and reinstalled my printer software.  Without success.  Can I print using a USB cable.

  Help, please.  I'm out of ideas.

  Hello

  Please see my response to your other thread:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/Photosmart-C5580-status-offline/m-p/3800742/highlight/false#M83723

• Loss of connection on all the players of the OTP

  We just noticed this today. All players (BDP-S390, S3200, S3500) faced this problem.

  Does anyone know if they do a server maintenance, or are simply down?

  All players show the connection is OK, but no real connection that passes at all.

  They all present connection errors when you try to access any application.

  OTP-S390 & S3200 on WIRED, S3500 the wireless.

  They all worked perfectly yesterday.

  Thanks for any info/help.