Loss of connectivity with HP C7280 wireless

I have a HP C7280 I connect wireless to several computers running Windows 7 Edition Home Premium.  All 3 computers, I often lose the connection to the HP printer and "remove hardware" and then "add printer" to return connectivity.  This does not happen with my printer Brother laser on the same home network.  Is there a solution to maintain the connection to the HP printer?

Thanks in advance for any help.

I am sorry to say that this is probably due to Win 7 64 bit.

There are few things we can do to improve the situation, but eventually it can't be fixed:

1. don't use WEP.  It is not secure and can be broken in about 10 minutes with the freeware.  In addition, it can cause problems of connectivity to printers.  Use WPA or WPA2 with a strong character 13 + password that you create.

2. we will set a static IP address for the printer:

-Print a the front of the printer Network Setup Page. Note the IP address of the printer.
-Enter the IP address in a browser to reveal the internal settings of the printer.
-Choose the network tab, then wireless along the left side, then on the IPv4 tab.
-On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 to 192.168.1.149.  We will use 192.168.1.200
-Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
-Let the gateway and DNS white. Click 'apply '.

Now, stop the router and printer, start the router, wait, and then start printing.

After that, you will have to redo 'Add printer' using the new IP address.

Tags: HP Printers

Similar Questions

  • Share an internet connection with a card wireless at & t

    I have a simple network or 2 XP computers.  One of the computers has internet acess thru wireless from AT & T 3G card.  I would like to activate two computers, access to the internet through this card.  Many examples exist for the use of a DSL line or cable modem.  Y at - it a trick to make it work with a lisk wireless card it?

    Sharing a wireless card should work as a modem cable or DSL line sharing. Open the network connections folder (Start > Search > ncpa.cpl ), right click on the wireless connection and go to the sharing tab Boulder computer Maven
    Most Microsoft Valuable Professional

  • Loss of connection with my router, shows only limited access and my network showed that unidentified

    Original title: unidentified network, missing the default gateway

    Hello

    So one day out of the blue I lost connection with my router. I was able to reconnect but this time around I had only limited access and my network showed non-identified. I tried to connect to a different wireless network, same thing. When I run ipconfig, I'm missing a value for the default gateway.

    I tried to:

    -Reinstall the drivers for the adapter

    -update the drivers

    -Reset my router

    -Gateway ipv4 manually of entry

    -kill lan via Device Manager drivers

    -scream at the computer

    I have a Setup to dual boot with Linux Mint along side Windows 7. When I boot in Linux it connects to any network without problem.

    Some help would be appreciated.

    Plug

    Windows 7 Ultlimate

    I7-4700MQ @2.4

    GTX 765M 2 GB

    8 GB RAM

    1 TB + 240SSD

    Realtek RTL8188CE wireless

    Hello Alex,.

    Thank you for your response.

    I appreciate your time.

    I suggest you to uninstall the network driver wireless and reinstall in compatibility mode.

    To uninstall the driver, follow these steps:

    a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

    b. Click to expand network adapters, right-click on the map and click Uninstall.

    c. restart the computer.

    Now you can Download driver from this link wireless.
    Reference:
    http://downloads.Eurocom.com/support/drivers/zip/238/238_RealtekWLAN_W764.zip

    For reference:
    EC http://www.Eurocom.com/EC/drivers (238)

    To reinstall the driver in compatibility mode, follow these steps:

    a. right click the driver file, and then click Properties.

    b. click on the compatibility tab.

    c. click on check "run this program in compatibility mode for" and select Windows XP(Service pack 3).

    d. click apply and ok.

    Now, install the driver.

    Please keep us updated.

    Thank you

  • Loss of connection with iCloud

    Whenever I login I have to re - connect with my iCloud - suggestions, no matter who?

    I assume you mean iCloud.com website?  How are you internet connection otherwise?

  • Connectivity with printer Epson wireless problems.

    Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

    See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

    Get help to solve the problems of printer on your Mac - Apple Support

    https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

  • Loss of connection with magic mouse bluetooth

    Since the upgrade to El Capitan I keep losing connection bluetooth with my mouse.  Not seem that this happened a lot with upgrade of Yosemite. This is the first time that ever happened and I got it for more than four years now.  Any ideas or am I right in guessing will have to wait for an Apple 'fix '?

    TNX

    Hi Triciafrommorden,

    The resources below provide some basic troubleshooting for problems with your Bluetooth mouse.  These give a try and answer if you still have problems with the Bluetooth connection between your Mac and your mouse.

    If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

    Care of tale,

  • Frequent loss of connectivity with the HP slate 6

    I bought a new HP slate 6 yesterday and noticed that my phone doesn't show any network connectivity to the SIM card every 40-45 minutes and I have to restart the phone to get connectivity back and this keeps the happenning.

    Can anyone help me please with a resolution on the same.

    Hi vij12pan, welcome to the Forums of HP. I didn't find any documentation for troubleshooting specific to lose connectivity to your device. If this isn't a hardware problem and not a problem with your service provider, then perhaps this diagnosis could apply: Tablet Locks Up or freezes (Android 4.2/Jelly Bean)

    It's the 'how' that I'm sure you have already done: connect to a 3 G network Broadband Mobile (Android 4.2/Jelly Bean)

    Beyond that, you need to contact support for more options: Technical Support HP, 1-800-474-6836 in North America. For all other regions, please click here.

  • OfficeJet Pro 8600 more impossible to connect with USB or wireless

    Using Windows 7.

    Printer was working fine on the wireless, then it ceased to be able to scan.  So I introduced to USB - all good.  Then stopped scanning.

    So I tried to unintstall and reinstall the software/drivers. Came to screeen where I'm supposed to create the USB connection, plugged into the USB port, plug-and-play software could not find two of the three drivers, nowhere to go.  Yet once uninstalled and tried Wi - Fi.  Printer is connected to the network without problem, but the computer cannot find the printer.

    Have you tried upgrading the drivers on devices - without success Manager, even though I directed it to the installation disc.  Then I tried to uninstall the printer on Device Manager and reinstall the software.  Nope.  Also several printer and computer, router reboots.  Nothing works.  If the printer at the moment doesn't help.  Thanks in advance for any help.

    Subsequently solved myself.  (Thanks for literally nothing to this forum of discussion.)  East went to the pages of HP.com support and firmware downloaded/installed, software, drivers and convenience store - everything I could find for this model.  In other words, I did not rely on plug and play to find the drivers for me, to which he seemed unable to do.  After installing everything that I ran to the resolution of problems and everything was good - computer could see the printer for a working network connection.

  • Loss of connectivity with my Virgin Media's broadband package.

    I have a Virgin Media's broadband package

    Hi Maxine Brydges,

    I suggest you follow the steps in the article mentioned below and check.

    Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

    http://support.Microsoft.com/kb/307164

    Let us know if that helps.

  • Connection with a XP wireless adapter problems

    PC crashed. "" After the file is missing or corrupted Windows\system 32\config\system. Ran the recovery disc, but now cannot access Internet.Using edimax nLite wireless dongle. Removed McAfee PC protection (Firewall), removed and reloaded dongle Driver.Removed again once and downloaded the new driver. Can see good signal from the router, but is unable to accquire network address. WPA2-PSK. Another PC and this laptop OK.

    Everything that I can reset or is it wireless adapter?

    Hello

    Maybe this can help, http://www.ezlan.net/wireless.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • locked settings by the adiministrator system and unable to connect with the new wireless network

    I changed my ISP and routers.  I need to change the settings to the new router wireless.  However, when I try to access the network settings on the printer through the screen on the printer, it is said that it is locked by the system administrator.  I am the admin.  Where can I access it without being on the network?  I tried to reset to the default values of factpry, but the same problem exists; It is blocked by the system administrator.

    I was able to solve the problem.  I went through the set up using the USB cord.  Then I switched it to wireless technology.

  • Satellite P100-434: wireless connection with Vista problem

    Just bought this laptop with Vista and so far could not get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set up new accounts on other computers without problem, but unable to do it on the P100.

    I tried the new RADAR feature and will not pick up all the networks, but by trying to establish a new connection it shows that a wireless network is available but it is nameless, although my network is named, I took the passkey of the network so that it is open but still does not connect, LAN via ethernet fine work.

    Wireless switch is on, but when I drag off switching wireless says WE

    Hello

    I can't give you an exactly the answer why you cannot connect to your WLan with Vista because there are so many options that should be checked.
    But I think that you will find the solution yourself with a little help from the Microsoft Web site.

    Please see this site:
    Connect to a network with Windows Vista wireless
    http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

    You will find many useful tips, screenshots and Tips how to connect to WiFi with Vista.

    Please post again if you have found the key

  • After traveling with my laptop, I am unable to connect with my connection wireless home

    After traveling with my laptop, I am unable to connect with my connection Wireless at home.  What I am doing wrong?

    Hello

    ·         What operating system do you use?

    ·         You are able to connect through wired network?

    .         You get the error message?

    Follow the steps in troubleshooting from the link and check if that helps:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    If you use follow Windows XP KB article troubleshooting steps and check if it helps:

    How to troubleshoot wireless network connections in Windows XP

    http://support.Microsoft.com/kb/870702

    See also:

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Identify and resolve home network problems

    http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  • Router Netgear WNA3100 give up wireless connection with various devices.

    original title: netgear abandons the connection

    I have a netgear WNA3100 wireless adapter, our router is a WII-G300N buffalo: router wireless Nfiniti broadband

    the laptop that I use has no connection problem and stay connected so I know that's not the router, my partner has a ps3 and xbox and none of those who suffer to abandon the connection
    I googled various questions about the problem and it seems that there are many people suffer the same probs, I was wondering if there was a way around it.
    BTW, I'm a complete blonde when it comes to computers any advice could you ensure that a total novice he'd understand
    Thanks in advance :) for all boards

    I have a netgear WNA3100 wireless adapter, our router is a WII-G300N buffalo: router wireless Nfiniti broadband

    the laptop that I use has no connection problem and stay connected so I know that's not the router, my partner has a ps3 and xbox and none of those who suffer to abandon the connection
    I googled various questions about the problem and it seems that there are many people suffer the same probs, I was wondering if there was a way around it.
    BTW, I'm a complete blonde when it comes to computers any advice could you ensure that a total novice he'd understand
    Thanks in advance :) for all boards
    13 hours later, I know not if I solved but the only thing I did different is to take the usb adapter out of its cradle and connected directly to the USB on the front of the pc, well, has not declined more than 4 hours and I can now play WOW without loss of connection every two minutes :)
  • How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect

    How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect)? I guess I have to be able to drop on my Google Cloud someway.

    Thanks, I'll do the application of inkjet Canon a try.

Maybe you are looking for