Lost audio track (Pro CC 7.0.0)

Similar Questions

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• Unable to access the M-AUDIO FAST TRACK PRO volume command afer mounting

  Hello

  I have a recurring issue.

  I installed an external audio workshop (M - AUDIO FAST TRACK PRO) and soon as I did it (immediately), a pop-up message kept appearing at startup with the caption "Cannot ACCESS VOLUME CONTROL".

  And now I can not access my volume control, of course and can not see any card available for use.
  I saw all the forums on this problem and it seems a repetitive problem on computers laptop toshiba.
  I know my way around and have re installed and uninstalled the two drivers from the sound card.

  I also tried the trick of Sndvol32.exe with no luck. I can't keep reinstalling the OS whenever this happens.

  Someone at - it a real answer to this question?
  It is not a question of pilots, or viruses or anything like the usual one.

  It is an exclusive problem of Toshiba.

  Thank you very much!!!

  Vista has an Interface different sound XP, some software needs an update to control the master Volume.

  Fast Track Pro to latest version update.

• The software you are installing has not passed Windows logo testing to to verify its compatibility with Windows XP. (Tell me why this testing is important) IM TRYING TO INSTALL A M-AUDIO FAST TRACK PRO.

  I am installing a M-Audio Fast Track Pro. It is a USB Audio Interface that allows me to record music. In the included installation, it gave me instructions to update my driver, so it might work. I installed and ran. But when I clicked on the button run the message about Windows logo test appears. The minimum requirements for the installation of the M-Audio is Pentium III 500 MHz with 256 MB of RAM, Windows XP (SP2), Direct X 9.0 c and a USB port. I don't know if it's relevant to my question, but I'm also not how do I know if I have fulfilled these conditions. I'd appreciate any help you can provide. Please and thank you for your time.

  You can ask the manufacturer of the software with a signature digital signature that will pass the Windows logo test, but probably do you. Ignore this message and install when even if your computer meets the requirements. Click here to find you info: start, help and Support, computer information, tools, My Computer Information, view general system information on this computer.

• Copy a single audio track in Premiere Pro

  Premiere Pro does not copy/selection of a single track using the track Select tool or follow select backward.  Although the tool is clearly placed on the track of the target, she selects several tracks.  Surely, it is not necessary to individually copy hundreds of clips to capture everything in an audio track, is - this?  Thank you.

  Lock the tracks you don't want to copy.

  MtD

• Premiere Pro is not audio tracks during the ingestion of MP4 video files?

  Everyone runs into a problem importing files .mp4 in Adobe Premiere Pro, in which only the video but not the audio tracks are imported?  Searching the Internet, I see that I am not alone with this problem.  Isn't Adobe Premiere Pro can correctly handle files video .mp4?

  Thank you

  JC

  Well Yes, that's apparently the case. Note 3 was not the problem. It's the fact that the app Android cinema FV-5 recorded the track audio in mono AMR, which is a rate very low bit QuickTime, mono audio format. Where, however, the application is set correctly to record audio to AAC - LC format, first Pro CC has no problems ingesting the blow to both video and audio on the smartphone.

  Thank you very much for your help with this.

  Best,

  JC

• First Pro CC and the lack of audio tracks for .mts files

  Hello guys,.

  I used to edit my files .mts with first Pro CC with no problems until yesterday.

  Now I import my file .mts (made with a Sony VG900), but the first does not recognize the audio tracks (which I hear fine with VLC).

  I tried changing the extension in .m2ts, but he did not, I also tried to reinstall the first but, even once, it didn't work and I tried (I was desperate) to install the CS6 first just to check if the problem is maybe about the CC version. Guess what? It did not work...

  I tried also to convert the file with the encoder in .mp4, but after the conversion, I can't hear the sound with VLC and, of course, this does not work on the first.

  Don't you think it's a first question or a problem of file?

  I used these same files for other videos (as a http://www.youtube.com/watch?v=H1X5vsZ-5yI) and I had no problem. Then I updated the first, I moved the files in the other folder, and the problem came to life.

  Any idea?

  (I'm waiting for my colleague to send me a new mts file just to check if I accidentally damaged the 'old').

  See the solution for the problem of #1 in this doc: known issues in Premiere Pro CC 2017 (November 2016)

• No display on the audio track

  Probably something stupid I'm do or do not do... but I saved a piece of Hammond organ on an audio track in Logic Pro X. For some reason but there is no display on the console when playing track. The track renders perfectly, but the meter section remains black.

  Any ideas why this might be?

  Thank you

  Paul

  After you restart the computer several times the problem seems to have taken care of itself. Go figure!

• How to replace an audio track

  How can I replace an audio track of low quality for a high quality one on Final Cut Pro X? For example, the audio of the film, by audio recorded simultaneously?

  Once I have sync clips, I can't see the two lanes in separate and remove that unwanted, I could do before (see https://www.youtube.com/watch?v=_qfIe6GbkzY). It does not work like that, and I don't know what to do!

  Thanks for the help!

  Myrna

  If there is a clip of multi, you can open it in the editor of the Angle and click on the speaker icon on the clip that has the sound you want to disable.

  Russ

• Audio tracks to follow tempo changes

  Hi all

  I'm really confused about something on Garage Band for iOS. Currently using an iPad with iOS 9.3.1 Pro 12.9.

  I started a new project, captured a loop of battery from another application (Anytune Pro in this case) and trimmed the loop so I could loop it and practice on top of it.

  I changed the tempo of the project and audio followed the project tempo change in an "elastic audio" way.

  What is happening now is that I tried to do again, and audio tracks do not follow the tempo change more! I don't know what I did different, I tried to reproduce several ways, but it simply does not work...

  Here is the link for the session, you can open it in your iOS device and change the tempo and you will see that the sequence (salsa one) will match the tempo of the session.

  https://www.dropbox.com/sh/swbfnj24qbuzhmn/AABSGk-zwc1GlMqxlYTMAhQda?DL=0

  If anyone can help me and explain how to make the audio tracks to follow tempo changes, I'll be very grateful! Thank you very much!!

  Hi flaviolira123!

  I can't open your file in Garageband (latest Version).

  But I think that you can only use Apple Loops loops to automatically match the tempo.

  I tried to loop an imported audio clip (import song, trimm)- but I do not have to be matching of tempo.

  I imported a DM1 via Interapp drum - but if I change the tempo of the project, my pace is in the old tempo...

  Have you found a solution?

• Sounds of rattling on audio track

  Hello

  I read here that you need to convert mp3 to aiff file in order to get rid of the noise by clicking on the audio track on the sequence.

  I use fcp 7 and yosemite to OS X. Neither iTunes nor Quicktime give me the option of conversion...

  Any ideas where I could convert?

  Thank you very much

  Compressor will be. And Quicktime Pro will be too... Choose EXPORT, then in the export, EXPORT dialog box drop-down list, choose SOUND to AIFF.

  If MP3s are music files, they might have DRM (copy protection) that prevent the conversion.

• How to save on multiple audio tracks?

  I'm going by Apple Logic help to try and learn how to use it.  I am currently in the recording section, learn how to record on multiple tracks at once.  Here's what helps:

  Save on multiple audio tracks at once

  1. Do one of the following:
     • Choose file > Audio recordings overlap > Cycle Mode on > create titles and silent.
     • Choose file > Project Settings > save, then choose the Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
     • CTRL-click on the Record button in the control bar, choose Save settings from the context menu, and then choose Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
  2. Set the input source instrument or microphone for each track you want to record.
  3. Click on the button Activate in the track header of each track you want to record.
  4. Move the playhead to the point in the rule where you want to begin recording.
  5. Logic Pro includes a metronome, which plays a steady beat to help you play in time while recording. You can disable this active or disabled using the metronome button in the control bar.
  6. Click the Count button in the control bar so that the metronome play a preset count-in before the start of the recording. Note: For initial configuration, choose registration > plug-in software component count, and select a measure.
  7. Click on the record button in the bar control (or press R) to start recording.
  8. Start to sing or play your instrument. A new audio region appears on each of the active record tracks.
  9. Click on the Stop button in the bar control (or press the space bar) to stop recording.

  I did, but it does not work.  I created two tracks.  I go to a track and click the button Save, then go the other way and click on save, but when I click on the button Save on the Panel at the top, it records only to the last track, I selected the folder it does not save to the other channel.  It seems that as soon as I go to another track and arm to save, it disables the recording on the previous track.  Apparently, help left something in the process.  If anyone can solve this?

  Hello

  You must assign different entries for each track:

  Input 1 > track 1

  Input 2 > track 2 etc.

  

  TDC

• Split audio tracks

  Hi all

  After the last update, I found that when I drop an audio file in the sequence, it seems to divide the audio in 2 separate on the same line tracks. When the file is read audio sounds distorted and out of sync. I don't normally use it for the manufacture of advanced video. I have usually just drag and drop files and add transitions. Any help would be greatly appreciated. Chances are I probably missed a setting or something that has been recently added with the update.

  

  Hi kevinb,.

  Premiere Pro is not split the audio into 2 separate tracks, it's just the way new way Premiere Pro displays the audio track. Basically, what you see, is 2 channels of the same track as well that waveform without having to expand the track. Now you can also reduce the titles (at a height of short chronology) not in active use in order to devote more space to others. That said, it works just like it used to work in the previous version.

  Your files get out of sync may be a different problem altogether.

  Thank you

  Regalo

• Importing video files WITHOUT audio track despite the source with audio

  Sigh. Back with another ridiculous question with Adobe CC do my job nearly impossible.

  Running Adobe first Pro CC 2015 9.2.0 (41) build on a brand new macbook pro 2015 provided by my work.

  When I start a new project, I will import my clips and if I add them to the timeline immediately they will import with their audio very well and everything will work. After about 10 minutes of work on the project, however, no matter what video file with an audio track that I drag in my calendar won't matter is no longer with an audio track, DESPITE the fact that the file was related, audio compatible and if I open the clip in the source cutting machine there will be sound. If I try to cut and import the clip of it the clip still will not have audio when importing to the timeline. It's infuriating! I recorded a gif of the question:

  

  Any ideas at all? My only option is to save the project, open a new one, clips import it immediately with audio, copy it to my Clipboard, reopen the real project and stick!

  Its all in the correction of the source.

  

• Issue of transfer of audio track

  Hi all

  Our shop is to first Pro CC FCP7 and I want just to pick your brain about the outputs of audio track.

  We record in 4 mono audio channels, and our exports at the end of the day are dual mono. (Ch 1 / Ch 2). For a schedule, he translates generally into

  A1-> Ch1

  A2-> Ch2

  A3-> Ch1

  etc.

  But depending on what Im cut I sometimes re - assign the outputs by clicking right on the slopes and combine different (e.g. A1 and A2-> Ch1, Ch2 all other tracks.)

  Anyway, I've had flexibility.

  I want to reproduce the same at first, but I'm a bit confused on the track output assignments.

  I put my audio sequence as:
  -Multichannel with 2 channels

  audio tracks-4 (each track is Mono)

  When I click on the assignments of output however, I see only a checkbox next to ' Master track channel: 1-2 ', almost as if my master output is stereo and not Dual Mono. I was expecting more along the lines of 2 boxes to tick, and assign each Audio track to one of the 2 titles of master.

  Am I missing something? Really would appreciate the help. 2 bonus for those who feel especially useful questions:

  -Any way to do a pre-selection of height track the default mode for new sequences to open? I love the track height preset function, but footage open titles in the same way, so I need to hit at the time preset of EACH key.

  -A way to set the default zoom for new sequences range? By default, I see five minutes worth of chronology, but I need usually only 1-2 minutes. Everytime I open timeline, I need either zoom in on a more adequate range, or need to perform the function "Zoom sequence", which works but is a bit annoying.

  Thank you for your time and help!

  In the tab titles to a new sequence

  The Type of track the Adaptive value - then you can direct the Mono specific to your dual mono output