lost, but still visible images files

Similar Questions

• 31.0a2 (2014-05-06), since this version cannot close tabs, when the tab is closed, it became inactive, but still visible, I had disabled tab mix addon but nada

  When closing the tab, it became inactive but still visible, I had turned off the mix tab add on but Nada, same problem. What should I do my Aurora lots of tabs, that I don't have.
  Restart Aurora did not help eider.
  Please fix it, thank you

  Hello again,
  OK, that's the Tab Mix Plus that disrupt the system, had a drink in 31.0a2 (2014-05-07), I would try to install their last WORM DEV as they suggest, but no change, then I would disable it for now to know their answer on.
  one thing: it is impossible to disable or enable the Adds in safemode, but no problem to start, restart aurora whenever he asked the condition.
  Thank you

• I already download the cs5 design premium for MAC OS but still the installation file is broken. Can someone help me?

  I have a product registered with a key official a try to download, at least 4 times, from the server of adobe cs5 for MAC OS design premium, but still the installation file is broken. Can someone help me?

  Post edited by: Graça Abreu

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Lightroom 5 import question - created but not seen image files

  I recently imported images of several cards in LR 5 and had imported them into folders by date and whenever I imported, I saw the pictures.  When we recently connected the drive I saw dated records but there is no images in these files.  They are lost forever, or they are hidden somewhere?  When you look at the drive through the viewfinder, it shows the folders are empty...

  TIA!

  Hi colleenzam,

  Please try and get these images in Lightroom topic of all photographs.

  Images should be copied in different folder, but it should it in Lightroom.

  Kind regards

  Mohit

• InDesign doesn't let Me not open Image files instead in my Document?

  Hi all

  First time posting here and I hope you guys can help! I just installed the Master Collection yesterday after using the suite Design Premium for quite a while. I just started a new document in InDesign and I just wanted to open some pictures and scans of Word in InDesign. However, after I click on file > open > "Proper case" there is a button on the window that reads "all readable Documents." This box is checked, but all the image files are "grey" so I can't select them. If I change the option mentioned earlier to "All Documents" files names is more "grayed out", but when I double click on a file I get an error (see attachment).

  I never had this happen before the images I want to open only from JPEG and PDF files? I need to get a project in tomorrow and now I'm worried. I guess it's something to do with the new facility, but I am at a loss...

  Thank you very much in advance for any help you can provide.

  In InDesign, you import the images, using the file > place command, rather than open them. ID only opens files created in InDesign, everything else comes Place or copy/paste (which you should not do with images except from one place to the other in identity documents - paste from Photoshop, for example, only gives you preview low-resolution screen RGB and no way to change and be updated later).

  If you are a fan of drag / drop, you can drag images from bridge, Finder or Explorer and drop them on the page, which is the equivalent of the place. Dragging a window of application is the equivalent of dough.

  Peter

• Back up and restore the question: system image backup does not show all by backup, but, but still it is there on this disc 'G '.

  Issue of OP - backup and restore

  Hello Forum,

  Recently by doing some interviews I found something strange, almost a week ago, I did a backup image of the system disk. Today, I was looking for the backup image, it seems there is no picture, as you can see on the screenshot attached No.1 he says there are no backups saved to this location, so I clicked on "select another backup...". "but nothing has been found as you can see on the screenshot No. 2, but it is still there on this disc 'G' as selected on the screen n ° 3.

  This image is useless? Shell I have delete and make a new one?

  Answers will be appreciated

  Thank you

  Motiman

  

  Hi Motiman,

  Thanks for posting your query on the Microsoft community.

  We understand the inconvenience caused and we will try our best to solve the problem.

  This problem may occur if the backup system image files is not created correctly or may be corrupted.

  I suggest you try again to create the system image backup and check if it helps.

  Refer to the following Microsoft Help article, which explains: how to create backup system Image in Windows 7.

  http://Windows.Microsoft.com/en-in/Windows/back-up-programs-system-settings-files#1TC=Windows-7

  For more information about the backup system image and recovery, see the link below:

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It can be useful, we meet with the status of your question. We will be happy to help you.

• I have paid for XI today but still have no idea how to change a PDF file - XI has well but I'm still not sure if XI is downloaded properly

  I paid for XI today, but still have no idea how to change a PDF file - XI worked fine but I'm still not sure if XI is downloaded successfully @.

  Hello Leo,

  Please, watch the following videos to learn how to change the PDF file:

  http://TV.Adobe.com/watch/i-didn' t-know-acrobat-xi-could-do-that-tutorials/pdf-editor-edit-text-and-images-in-pdf-file/

  http://TV.Adobe.com/watch/learn-Acrobat-XI/editing-a-PDF-in-Adobe-Acrobat-XI/

  Kind regards

  Anoop

• Get a preview of image files but not the other files

  In the Finder (or an alternative file manager) is there a way to show previews of image files, but not for the other files?

  With the image files, it will display a preview. With other types of file, a preview is useless and its best to see a standard icon indicating the file type.

  Any decent file on all Linux distributions browser lets you choose Preview vs standard icon based on case by case basis depending on the file type. I can't see how to proceed in the Finder (or the various alternatives as TotalFinder). How can I me Finder for this?

  The thumbnails, you mean? I don't think that there is a 'decent' solution for OS x. But then again, I don't know everything.

  https://www.Apple.com/feedback/MacOSX.html

• Photosmart more B210a: I have a Photo smart Plus B210a which will scan but not output to the computer image file.

  Hi eveyone.

  I go through the motions of scanning photo via web server embedded on safari, the scan occurs and the scanned picture appears in the preview image on the browser tool. So far so good.

  I right click to download the image to the computer when you are prompted, the download address is below.

  http://192.168.0.3/scan/jobs/16/pages/1

  by pressing the downloads, arrow down on the safari browser, it is said

  "Zero kb of? -l' requested url was not found on this server. »

  Now I can speak to the printer/scanner and successful playing for me, but it generates no files to this address or the address is incorrect.

  little stuck now... any help welcome.

  one think I have and let me know if you need more info.

  D

  Hello.

  First of all make sure that the latest version of the software is installed by following these steps:

  Make sure that the printer is turned on and connected to your Mac or on the same network.

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  Once installed the latest update, try scanning through Capture of Image or the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• When you use Windows Explorer to view the files and folders, the thumbnails of image files appear briefly then are replaced with the default icon of the image file. I tried the answers to similar problems, but none worked.

  Browse the folders with image files, I cannot see the thumbnail icons for images correctly.  I know, it should be possible, but I can't do it.

  When I first open a folder in Explorer, I see the correct images for a fraction of a second, then all images are replaced by the thumbnail of the image file (which looks like part of a digital SLR).
  I put all folders to display picture to display the preview and the filter, and the "always show icons never thumbnails" is not checked.  Display file icon "on the photos' is unchecked (I tried checking, too, without change).  I also deleted the thumbnails using disk cleanup as suggested on another question, but which did not allow them.
  The result is that, if I want to open an image for editing or downloading, I have to use a third-party application (for example, Pentax Photo Browser) to preview images, and then return to the Explorer window to select the correct file by name. Don't try to difficulty of these things that are not broken.

  izzlecrate,
  You might want to try it and I just did this procedure myself a moment ago and surprising, it worked!  First of all I must tell you that I have Windows Vista, but the information I got was for Windows 7 and it worked.

  First: You must create a NEW FOLDER and put it on your desktop.
  Second: Move or copy the contents of the original file in the NEW FOLDER on the desktop. I copied the content, just in case something went wrong.
  Third: After that is finished and all the contents are inside you.
  Fourth: On the desktop right click on the folder and click Properties at the bottom of the box.
  Fifth: Click Customize tab at the top and then the Middle click on DEFAULT settings for the folder.  Click on apply to, click OK and your done

  NOW! You can move the folder wherever you want by drag-and - drop the folder and when it's done and that's the best part, you should see the thumbnails of the folder on the EDGE of the folder that you just created.  It worked for me and I hope it works for you.
  I have 10 years of experience with my computer and have troubleshooted my friends for viruses and other computer problems successfully.  I'm advanced computer user.

  That this is done, it restores the folder its original settings.  Good luck! Rick

• I just got a blank screen, lost my screensaver. But still have the sidebar. No office

  Original title: lost

  I just got a blank screen, lost my screen saver. But still have the sidebar. Not top of office.

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• The program I use is called Defraggler is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation

  The program that I use is called Defraggler, it was created by piriform LTD and it is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation. I pressed defrag again and again but he still took no action and said always full defragmentation when clearly there is no. I myself had a look at the options and settings and it should properly according to them. Any help will be kind of you. Thank you.

  http://Forum.Piriform.com/index.php?s=6f56df458b93b49ff84c76f6fcd13a05&ShowForum=19

  Kindly repost of Piriform Defraggler forums for help with their programs.

  http://docs.Piriform.com/Defraggler

  And read the Defraggler troubleshooting, info etc. at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  You might try the Disk Defrag at the link above instead of Defraggler.

  See you soon.

  Mick Murphy - Microsoft partner

• error 0x80071ac3: difficult to copy the files from my old, but still working, USB

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  Hello

  Files that cannot be copied are in bad clusters.

  Try running chkdsk x:/b

  The /B switch will cause the disk check to reassess the bad clusters and try to fix them again.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Unable to print pdf files in acrobat.  Acrobat makes me save as, but still does not print the doc.  any printer.  have the latest version of the CD player

  Unable to print pdf files in acrobat.  Acrobat makes me ' Save as ', but still does not print the doc.  any printer.  have the latest version of the CD player

  It doesn't matter if the file has been scanned or created in MS word.  regardless if it is single or double sided.   However, I can print the document in the application of Amicus Attorney, that makes me think it's a matter of acrobat...

  Clear the PRINT TO FILE option in Acrobat.

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?