Lost manual

I lost my manual of my OfficeJet 6500 a more printer.  How do I:

(1) get a new manual

(2) where is the location of the internal cartridge of the device

(3) how to change the cartridge. ?

Hello

Here is the manual

http://h10032.www1.HP.com/CTG/manual/c02519721.PDF

Kind regards.

Tags: HP Printers

Similar Questions

  • A lost manual control of exposure in mode manual 5Dmk3

    Never changed the settings as far as I know. The day before I was shooting photos with full manual control in manual mode. I packed my camera and when I picked up once again, manual mode now behaves like automatic mode when you try to take pictures. It's self in the LiveView. I can see change LiveView as I move the camera around and I can't change the ISO or the opening of the exhibition. I can make up the ISO menu and select different ISOs, but the image does not change. When I turn the steering wheel opening command, the f-stop on the screen number changes, but in the lens blades do not move and nothing changes.

    I still have a manual control total when I switch video mode, this happens only in photo mode.

    Here's a short video that shows the issue I'm having.

    http://youtu.be/kQN-H2Qwsu4

    EDIT: Just noticed something. It seems that the device will take the image with the settings I chose, but will not display what looks like this exhibition in the LiveView. When I enter the picture mode the opening wide stay open no matter what I do, I can look into the lens and see that the aperture blades are all open. If I put the opening to F10, exposure does not change in LiveView and the blades do not move, but when I press the shutter, the blades in place for a split second then take the photo to F10 and lance return back for large open. Same thing with the ISO. So I guess I still have manual control, but it is not very good for me if I saw what looks like this exhibition in the LiveView.

    ?

    The blades stay open until shooting. However, there is a way to stop down to see what things will look like without shooting. The depth of field Preview button is located on the side of the lens to the body almost mounting area opposite the release button. . According to my manual is downloaded, it is covered by the news on page 165.

  • I have a HP Pavilion Elite m9280f PC, I replaced the case for a larger, having connection problems

    I have a HP Pavilion Elite m9280f PC, S # [personal information deleted], Windows Vista 64-Bit. I replaced the case for a larger, having connection problems. Lost manual, downloaded manuals, I can not find a diagram of the wires hanging in the motherboard. Help please Tom

    Tomahawk, welcome to the forum.

    This is the page for Specifications of the motherboard of the computer.  You should be able to enlarge the diagram of the motherboard to locate most of the connections.  The only place you may have a problem is with the power button connector.  Some cases are not compatible with HP moterboards.

    Please let us know if this solved your problem or not.

  • Print Info Page

    I need to print a part of the package die 34 "11 x 17. I want that section of tiles & print this section @100 % w/@top Info Page.  I can't find a way to do this. I can't adjust the offsets for negative values so...? Ive always had a problem with that. If this is not possible. Is there a solution? As the ability to add slugs in Acrobat? Can someone please advise. Thank you

    The information on the page is only displayed at the upper left of your work plan.

    If you want to print a specific tile with the information page that is not the upper left corner, you have a problem. Canoot you will have to use the background settings lost & manually dial your information page. Or you would have to do artbaords for each of your tiles.

  • I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

    Question
    I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

    To open the window to customize the toolbar, do one of the following:

    • Firefox button > Options > toolbars
    • Press ALT or F10 to temporarily show the Menu bar and choose from there (view > toolbars > customize)
    • Hold DOWN the ALT key while pressing the VTC keyboard letters

    See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36

    Regarding the new button tab, you see the end a '+' after the last tab or the right of the tab bar? This is the icon of the new tab.

    • CTRL + T will open a new tab

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Manual bookmarks are lost in the firmware c. 1.01.22A

    I have been successfully using textbooks "bookmarks" for MP3 files placed in the files or Podcasts and audio books until I just put firmware to version 1.01.22A.  Now, I've completely lost all ability to place these manual bookmarks in the Podcasts and audio books.  The previous firmware I had the option for "resume from the beginning" or "current position", if the MP3 file has been placed in the files audio books or Podcasts.  What happened to these manual bookmarks?  I really want to come back on this feature.  Please tell me how I can go back to the previous version of firmware so I can get back them.

    Thank you for responding to my post.  I understand that I would lose my previous manual favorites when I do the update of the firmware, and I had that happen before in the previous firmware updates, so I expected.  However, I've tried several times to use the feature of new manual bookmark just like before pausing to new points in different MP3 files stored in folders Podcasts and audio books, and he had simply stopped working after firmware upgraded to v.1.01.22A.

    But since you said that the service had not really been lost, he gave me an idea to try that worked so I'm passsing it on in order to help other users with the same issue.  It is necessary to remove the MP3 files that have been previously stored in the records Podcast and audiobooks, unplug and allow the files to be rebuilt, then reconnect and copy the files in these folders MP3, finally disconnect and allowing the files to be rebuilt.  After this process, you can place the manual bookmarks using the break again.

    Thank you.

  • My computer crashed and I lost my manual CS6 .pdf version

    My computer crashed and I lost my .pdf version of the CS6 manual I can download another copy?

    http://helpx.Adobe.com/Photoshop/archive.html

  • I have rearranged the bookmarks (by keywords) and I lost my manual sorting original, crucial who left their jobs?

    I create clusters of related bookmarks within each file, each set out from separations. For the first time, I have sort by key words, and when I went to manually sort name / my site, all the work was gone. It is all sorted by alpha now. I guess that cannot be undone, but I hold no hope.

    Have you tried organize > Cancel in the Manager of bookmarks (library)?

    If you did not close Firefox again then see if you can use "organize > Cancel ' in the Bookmark Manager (Bookmarks > show all bookmarks) to cancel this action and restore the bookmark (s).
    Hold the button is the first of three buttons next to the back and forward buttons on the toolbar in the library (Bookmark Manager).
    If it does not work so that you can restore bookmarks from a JSON backup in the folder bookmarkbackups.

    • Bookmarks > show all bookmarks > import and backup > restore

    This will replace all current bookmarks and you lose the favorites that have been added since the backup was created.
    See:

  • I don't really know what just happened, I think that I've updated and then lost all my favorites. I can't even manually, restore what do I do?

    I am a bit tech-illiterate and I don't know what happened. I seem to have updated, but some how lost all my favorites. I tried to restore them but there is nothing for me to restore from. What should I do?

    Do you mean that the current profile bookmarkbackups folder is empty?

    You can use this button to go to the Firefox profile folder currently in use:

    You have an "Old data Firefox" folder on the desktop?

    If this is the case then you can try to restore the bookmarks from a backup in the folder bookmarkbackups.
    You can see the order of the day are counted as part of the name of the file.

    • < number > _ < hash > .json bookmark-YYYY-MM-JJ_

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • Photosmart HP 6520: lost my photosmart 6520 by manually changing the server address

    Hello
    My printer is connected wireless and prints well by AirPrint and when I send it jobs by email, but after successfully scanning to e-mail several times it suddenly wouldn't connect to the Internet, which gives an error message. Tried to turn it works several times. Leva help on the forum and follow-up of boards to manually change the DNS server to 8.8.8.8 and 8.8.4.4 another server. This resulted in my losing access to my printer via his IP on my browser so I can't undo my actions and my printer always gives the error message when I ask him to scan to e-mail. All other functions work.
    Help, please. Thank you

    Hey @Kybosh,

    Welcome to the Forum from HP Support.

    I understand that you are having connectivity problems with your HP Photosmart e-all-in-one 6520, printer.  I want to help you with this.

    I'm surprised that a manual DNS has interfered with your setup - I think generally it does the opposite and enhances connectivity.  In any case, do not despair!   I have some suggestions that can restore the features of your printer.

    I recommend a fresh start by restoring the default settings of your printer to avoid any persistent configuration problem.  Here's how:

    • Front panel of the printer, press the key
    • Touch tools
    • Touch Restore Factory Defaults
    • * Note that this will reset your settings wireless and webservices.  If you have an address custom ePrint it is deleted permanently.  Click here for more information about setting up a custom address ePrint.

    With your restored default settings, continue on as indicated:

    • Touch the wireless icon ()
    • Run the Wireless Setup Wizard and reconnect to your network (SSID)
    • Enter the wireless password if prompted
    • Once you have created a wireless connectivity, reactivate your webservices/ePrint feature (essential for the use of scan to e-mail)
    • Tap the icon of webservices ()
    • Enable Web services and press OK to enable your printer will automatically update
    • Once completed, it will print a page of information.  If you are looking to complete an ePrint installation, it will be useful later - click here for more information.

    Now, if all goes well you can rebuild your Setup email scan:

    • Tap the scan icon
    • Tap the scan to E-mail
    • Enter your personal email address
    • Retrieve the PIN code of your Inbox
    • Enter the PIN on your requested to complete printer installation

    The above restore the functionality you were missing?

    Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

    Please post in the Forum of HP's Support and have a great day!

  • Manual line Fetch, manual line treatment, prevent lost updates

    Hello

    I am faced with a simple form that selects from a view and allows the user to update or insert data.

    I would like more control over the process of update/insert and so prefer to write my own line of treatment procedures. The examples I've seen on this forum do not include optimistic locking, which makes default APEX. Are there examples of code out there that mimics what Oracle does with the Fetch of automatic line and automatic line treatment that applies the optimistic locking.

    I expect to see some kind of sequence of hash, or other means to see what looked like the data before the update included in the extraction. It would then be compared to the data before it is updated. I don't see any additional fields in the page containing this kind of information when I create a form using the wizard.

    Advice would be welcome.

    I am an Oracle PL/SQL Developer by profession, but am new to Oracle Application Express.

    Thank you
    David
    Request Express 3.2.0.00.27
    ______________
    I use the Dvorak keyboard, because it makes sense

    Hello

    I'm sure that you are looking for something as in this article (check at the bottom of this one)
    http://www.Oracle.com/technology/products/database/application_express/HOWTOs/tabular_form.html

    Kind regards
    Oleg

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

  • Come on Apple! : why Itunes wants to erase my iphone to manually manage music for me

    Hello

    I wonder if there is a way to activate the option to manually manage music without the synchronization and erasing all the info on my iphone 6. It is terrible because I can't understand how to do this and I do not use my computer to store all the music on my iphone, and I don't know how to backup all my pictures and etc. in my computer. I have activated this option before on another device and was angry because when Sync I lost all my photos including images of my great-aunt who could now be passed away while she was struggling with cancer was given a little time to live. I am currently using a third-party program called AnyTrans to add titles to my iphone but I want to be able to do simply in itunes instead. That said, does anyone know how to enable this option for those of us who don't do the thing whole sync? As is - this does anyone have ideals about why itunes forces you to synchronize when you change the settings?

    Appreciate any help and advice given here. Thank you!

    Hello

    For the sake of Apple, you can only toggle a device of automatic synchronization to manual management without removing the media on this issue when it is connected to the library, with which it was previously synchronized. See recover your iTunes from your iPod or an iOS device library for general steps to recover all media on a device in the local library, after what you can afford wipe and reload it. If you choose to manage manually in the future you should keep all of your media in a local library that you have backed up so that you can restore your device or replacement as and when the need arises.

    TT2

  • I have a new iMac and I want to make a backup of my iPhone, I lost my dates of the will? because in this computer I have no backup I made before

    Hello

    I bought an air iMac, and now I would like to make a backup of my iPhone on this computer.

    but the question is, if I do not have the backup that I did before, it is possible that I lost my dates?

    because the computer I had entered is not an iMac.

    Thank you

    Francesca

    Hello Francesca Montani,.

    Thank you for using communities of Apple Support.

    Congratulations on your new iMac! I understand from your message that you want to create a backfile to your iPhone 5 c, but are afraid of losing the data on it. I know how it is important for you to keep your data on your iPhone 5 c and to create a backup file for it.

    When you plug your iPhone 5 c in your new iMac, iTunes should open. Your iPhone 5 c should also receive a message asking if you trust the computer. Go ahead and trust of the computer.

    iTunes should display a page that says: Welcome to iTunes and you give 2 options. You want to choose the option to play up like new. Don't worry, it will not erase anything from your iPhone. The next page, you should see if the page summary of the iPhone. You should see a picture of an iPhone and a description.

    In the middle of the right side, you should see a section called manually backup and restore. To create a backup file, select Back Up Now. This article has steps and a picture to help you create an iTunes up. I have also highlighted the steps below:

    The backup of your iPhone, iPad and iPod touch

    iTunes

    1. Open iTunes and connect your device to your computer.
    2. If a message asks you to Trust This Computer or device password, follow the steps on the screen. If you have forgotten your password, get help.
    3. Select your iPad, iPhone or iPod when it appears in iTunes. If your device does not appear in iTunes, know what to do.
    4. If you want to save data of health and activity of your device iOS or Apple Watch, you must encrypt your backup: check the box called Encrypt [device] backup and create a memorable password.
      Write down your password and store it somewhere safe, because there is no way to recover your backups iTunes without this password.
      If you do not need to save your health data and activity, you can make a backup that is not encrypted. Just click Back Up Now.
    5. After the end of the process, you can see if your backup completed successfully in the iTunes preferences > devices. You should see the name of your device with the date and time that iTunes created the backup. If you encrypted your backup, you should also see next to the name of your device.

    Best regards

  • How can I manually sort the personal bar?

    I can't sort my bookmarks toolbar now. I sort normally manually, but probably after an automatic update, they are sorted in alphabetical order. I can't drag and drop more.

    I have changed the settings in Library view which apparently change the settings, but they have no effect on Firefox in use.

    Interesting. I see that my bookmarks library won't let me drag and drop folders or individual benchmarks at the present time. No idea why and I don't have time to figure it out now.

    A quick test in a new profile works well, so it's something weird in my profile (I also lost the troubleshooting information in this profile of work so very odd indeed).

    Try in Firefox Safe mode, if it does not help then try to create a new profile using Firefox or additional test reset again.
    (CARE! Reset will clear your firefox extensions, so a new profile is usually a better option)

Maybe you are looking for