Lost my connection between all my apples

Similar Questions

• I lost the connection between the icons on the desktop and the program. When I click on an icon, I get the OPEN WITH menu.

  I click right-properties and I get C:\Windows\system32\rundll32.exe Application not found.

  I tried to download fixit and got the OPEN WITH menu.

  It sounds like your .lnk and/or your .exe file associations may have been lost.

  You can try to fix the ".exe" and ".lnk" file associations:
  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  or you can try to do a system restore to a point in time before you had this problem:
  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >
  If you have a .exe association problem, you may need to run the restore of the system from the command prompt:
  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW

• Connection between Windows media center and Xbox is lost when you try to watch movies

  I start watching movies via the windows media center and after a few minutes it turns off and it says that the connection between my pc and the xbox has been lost, I have previously watched movies like this with no problems and have not changed the settings of any sort help it would be appreciated

  Hi samperry,

  What is you receive the exact error message?

  Method 1: You can follow the steps mentioned in the article below
  What happens if the connection to the Windows Media Center computer is lost?

  Method 2:  You can see the steps outlined in the article below, which deals with a similar question

  Error: Session Terminated (when connecting a console Xbox 360 to a computer running Windows Media Center)
  http://support.Microsoft.com/kb/911123

• Connection between 1510 all-in-one and my laptop

  I just bought the above printer, but it was sold without a connection between my computer and the printer cable. However, my printer previous 2050 all-in-one who died has what appears to be a similar cable but I can not get the impression of working with her. Do I need a new connection? and why?

  Thank you for your help but I took the advice of a previous writer who is returned to the supplier.

  He sold me a rope he was sold as a matter of course with all the printers of this group number. The printer costs R700 and the R68 cord so not a bad deal

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• New MacBook Pro lost internet connection

  Fortunately brought my MacBook Pro retina display 15 "and connected to a Dell monitor. (Hours of hassle, but I have another question/problem).

  After using it for a while, I lost my connection to my home network. But my older MacBook Pro 13 and my iMac 27 were still connected.

  I took the new MacBook Pro 15 "at the kitchen. And here, I got my connection again.

  So... WHY

  And... WHAT can I do to keep my internet/network connection when my new MacBook Pro 15 alongside other computers?

  AND... Is there a use for my Airport Extreme, when my DSL provides internet and network?

  No use of Airport Extreme is not mandatory

  I use Dlink router and modem and all the Apple stuff in our home works very well

  That said-

  Press Option - then click the WiFi icon and click the wireless diagnostic tests - the process of

  If nothing remarkable is found - let it run in the background as you go about your work

  Also, when you do this - take a screenshot of the gray information and post a photo

  Finally two points-

  1. you have indicated this is a new device - is there sufficient numbers DNS for the tour of your router?

  2. do you know if your router provides 2.4 GHz or 5 GHz of bandwidth?

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• Bluetooth connection between iPhone and iPad

  My iPhone 6 does not connect to my iPad via bluetooth.

  I previously used the bluetooth connection between my iphone and iPad to connect the iPad to the internet. Despite the two devices were among the recognized bluetooth devices and they were previously linked/partner, it was not possible to establish a connection.

  Perform the actions recommended for repair/reissue apple support - 1. Toggle bluetooth, 2. turn on/off the unit, 3. remove the iPhone/iPad bluetooth connections - 4. Reset network settings - 5. Reset all the settings-, nothing works.

  IPhone/iPad devices isn't even on the list of bluetooth devices available on the iPhone, or iPad. Everything that happens is the animated icon turns all the time.

  Deleting a connection to a device and bluetooth speaker/amp from the pairing of the speaker/amp system process made a new connection.

  iPhone 6:

  Model: MG4F2QN/A

  SN: C31NLG8KG5MR

  Version: 9.2 (13 c 75)

  iPad:

  Model: ME898LL/A

  SN: DLXM42LHFK13

  Version: 9.2 (13 c 75)

  Please give instructions for the previous maintenance work bluetooth connection between iPhone and iPad.

  Thanks in advance

  To use the Hotspot feature (that you described for the connection), you must use the instructions below.

  Share your Internet connection with Personal Hotspot - Apple Support

• I lost my connection Wireless at home.

  I have a time capsule/router.  I lost my connection Wireless at home.  Cannot get internet connection to one of my computers/devices in the home.  Help!

  Need to load more information.

  Feeding cycle you the entire network... Start up in the correct sequence?

  Modem... Wait 2 min

  TC... Wait 2 min

  Client devices.

  If this does not work...

  Tell us everything... what model is the modem? Is this also a router?

  What model is the TC... The base A1xxx please?

  The fact the main TC on... amber green or flashing led?

  Taken in a computer by ethernet that get you internet with wired connection, just all the wireless clients are turned off?

  Tell us about such things and we can work from there.

  But I suggest you a factory reset as well... Here are the basics.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

• Localhost UDP connection between FCR and Matlab

  Hi all

  I have a question about the connection between Matlab and FCR UDP. My idea is to Exchange data between Matlab and Labview on the same computer.

  So I found the 'UDP Simple' of the FCR 2.0 sample project where periodically a datasample is generated randomly and sent to the remoteport 61557 local host. In the project a 'fractional number of string for transmission' is used for the transmission of data. The receiver of the sample project reads from the same port to receive the datasample.

  Now, I'm interested to read this simple stream from Matlab (just at first), however, it does not work and I'm not sure why. What I do in Matlab is the following (code Matlab)

  delete variables;
  u = udp ('127.0.0.1', 61557); % Of installation UDP Object
  fopen (u); open reading port %
  A = fread (u, 1);  % read an element
  fclose (u);

  With this code, however, I get a timeout by saying: "' WARNING: unsuccessful reading: the amount of data specified has not been returned within the time limit." "

  I'm not sure why this happens, maybe you could help me out here? I guess that the formet serving to VCF is not the same as in Matlab? Maybe the Terminators are not the same?

  See you soon,.

  Steve0

  Hey

  So, regarding the problem actually, I found the solution today. It was not the firewall, but a simple configuration in Matlab seting the UDP port. So the side of Matlab, to change the definition of udp object according to

  u = udp ('127.0.0.1', 'Thelocalport', 61557);

  If you have

  u = udp ('127.0.0.1', 'Thelocalport', 61557);
  fopen (u);

  A = fread (u)

  fclose (u);
  Delete (u);

  Who does the trick and you can read from the port. Then of course you say Matlab that you read from the "LocalPort" x, which I wasn't aware of.

  On the transmitter side, you simply:

  u = udp ('127.0.0.1', 61557);

  fopen (u);

  fwrite (u, '1');

  fclose (u);
  Delete (u);

  Here, you set just the port of transmiting.

  About the format of the data: I used the simple UDP protocol streaming Comms project where a random number is generated as a double, transformed into a string (ASCII values) and transmitted. At the level of the receiver, you get as much the UDP packet with the ASCII values that you must turn if you want to find the number.

  I hope this helps anyone having the same problem.

  See you soon

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• OfficeJet Pro L7780: Printer lost wireless connectivity

  The printer (which worked before wireless) has lost the connection to the router (wi - fi) for wireless printing and can not find the router when you run "Wireless Wizard". Have restarted the printer several times, but no chance connection. Summary diagnosis said the network name 'failed '. (I have with other devices wireless connectivity). The Configuration Page shows wireless status is disconnected and shows all zeros for the IP address and the subnet mask.

  Need suggestions on what to try next. Thank you.

  Turn off the router and back on again was! Printer has now found the router and is wireless printing. Thank you very much!

• wireless connection between Mac printer &amp; hp

  Hi, I am unable to set up the connection between the Mac and the printer hp 1102w, known problems thereby? I couldn't figure it out through the user's Guide... Thank you

  Hi cpagliuca,

  Thanks for letting me know you are using 10.6.

  I'll give you the steps for 10.6, they are a little different.

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open in other browsers.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  (hold down the x key and when the printer makes a noise to let go of taken)

  Plug the USB cable from the printer for Mac and install the printer software.

  (if it isn't already then skip this step)

  Go to Apple, system preferences, print and fax.

  Double-click the P1102w.

  Open the utility.

  Click Printer Setup.

  Click config HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the print and fax.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello p1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Remove the USB driver, then add the network printer.

  If there is anything else I can help you with just let me know.

  Good day.
  Thank you.

• lost the "switch between windows" button on the Quick Launch toolbar

  Hi, I lost the "switch between windows" button of the toolbar quick launch, how can I restore it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dasepo salvation,

  Here are the instructions for the program shortcut "switch between windows" returned the fell on the Quick Launch toolbar:

  First of all, make sure you that you must show hidden files and folders active. Here's how:

  Go to: Start/Control Panel folder Options/configuration and select the 'view' tab select "Show hidden folders and files under the section files and folders hidden from advanced settings".

  Then you can get the file from quicklaunch default section. This location of file is here:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  You can paste this link into the search bar (Ctrl-Esc). When you get to this place, you will find the 'switch between client.lnk' which you can then drag directly to the Windows Orb and it going bust in the Quick Launch bar.

  Hope this helps,

  Steve <> Microsoft Partner

• Lost internet connection of TZ205W

  I have a new TZ205W firewall, updated when installing to (I think) the SonicOS latest version 5.9.1.0 - 22o. The WAN port is connected at the border FIOS.

  After several hours of working properly, it loses its internet connection. At that time:

  • I can access is no longer remote,.
  • They no longer ping the WAN port,
  • He cannot ping internet addresses, and
  • I can't access the internet from the local network.

  However, I can ping it and connect to the administration of the LAN interface. As soon as I have it reboot, I again have access to the internet from the local network and can ping/access it remotely. Once it's down, it never comes back to the top unless it is rebooted.

  I have already tried these things:

  • Restarted "Current Firmware with factory default settings", and then he reconfigured the wizard and stick to the simple minimum configuration (i.e. leaving out my VPN and most of my NAT policies); It is exactly as I do for my several other TZ205Ws who work in other networks, except for the intellectual property-specific information.
  • Re-uploaded the same version of firmware, and then reset to factory default settings and it reconfigured as above.
  • Called the ISP to see if there was any possibility of a problem MTU, a conflict known between their unit and SonicWall, or maybe they could see certain types of traffic from the router that could make in being blocked on their side. But all they can tell me is that they see no unusual activity and not responsible for my router, only them that sits on the other public IP address on the same circuit. My other router provided by the ISP to another public IP address (connected to the same switch on the WAN side) doesn't lose connectivity when the SonicWall; However, this port is still upward if I can replace the firewall prior non-SonicWall serving this LAN, I got the new SonicWall.

  At its connection to the Wan is down, I don't see anything different on the device, so I am at a loss even know what diagnosis of the measures to be taken. Are there specific parameters and/or log files that might be useful to diagnose the problem? Is it possible that there is a problem with SonicOS version am I using? Pourrait - this point to a hardware router problem?

  Finally... an answer. In short, it was a known problem with the Alcatel FIOS in border Ontario here's the recap:

  Business of my client was sitting there in this situation with the border router and a Netgear FVS318 works correctly for perhaps three years. Then one day, we get more sophisticated and need a reliable VPN. So I happily order two SonicWall TZ205 units, which replaces the old Netgear. The SonicWall at the other end (cable internet service) works fine, but to do this, the border gateway refused to communicate with him, after six hours. A restart of SonicWall has solved the problem, but she returned after six hours. When he is down, I can still communicate with the border router that is on the same network with the ONTARIO Frontier and my SonicWall switch. So I know my port WAN on the SonicWall is not the problem.

  I have reset the SonicWall to factory specifications, ask questions on the forum of SonicWall, even to swap this SonicWall with one at the other end. I opened a call at the border. My research points the finger at ARP, but one of the level 1 technicians gives me this message of network technology: "This is not how it works." It was perhaps in hour four of my forty-hour ordeal. I consider allowing the ARP open via the diags hidden from the SonicWall page but reject the possibility because of the stern warning that this is not safe. (Sigh... anyway could have save me several hours).

  No change in this. I dig, dig, dig. I have activate gratuitous ARP. Finally, I discovered, by chance, while tinkering with ARP on the SonicWall, that a cache ARP Flush on my SonicWall solves the problem immediately. Now, how can that be? I ask Frontier. "It is your own router," they say, 'if we do not support. " I ask, "If my monitor package reveals that my router sends packets to the IP address and MAC address of your gateway and your entry door does not, whose fault is that?" They say 'Yours'! "Of course," I think, "and if my router did not meet your entry door, it would also be my fault." But what I'm saying is, 'I have to switch to Comcast to be able to use an advanced router." "It's your choice," said the Tech level 1 (the regional director had no one to happy to hear about it when I finally made an autonomous escalation by calling the line of business of complaint).

  In the meantime, a filtered to ARP packets monitor reveals that when I clear the cache ARP of SonicWall, there is something gratuitous ARP does not: it sends an ARP request explicitly to the IP address of the gateway. And this proves with certainty that it is not only related to ARP, but this is a problem on the side of the border. Yet, I can't speak with an NT. They tell me that their door is not in ONTARIO (which goes far to get rid of the smell of the true cause later).

  This is a site that is half an hour from my office, so Meanwhile, I activated a second NIC on a server at the office, given that the two default gateways and RDP server enabled on both so that I can RDP in via the border at the NIC2 server router, and then connect to the SonicWall via its interface LAN of NIC1 of the server do this without yet another trip into the office.

  At the same time, users in the Office tire repeated outages and ignore my instructions to call me when there is a power outage and unplug, plug back the power of the SonicWall while I'm trying to troubleshoot it. And, of course, it's my fault because I went from routers. So I withdraw my cheap Netis switch, connecting three WAN devices and replace it with Netgear switch a little better (but still not managed).

  In the meantime, however, I now put in more than 30 hours between all the swapping & resetting devices, the many trips in the office and maybe eight or nine calls to Frontier - none that ever made me an escalation to level 2. And all the time, I was insisting that someone there has been the answer already and just needed this person to I can have the five-minute conversation required. That's not to mention buying a for my router SonicWall support contract and a few hours on the phone with the support of SonicWall. And I can't exactly charge my client for all this time, since, according to them, it was my choice to switch routers.

  Then, suddenly and without apparent reason, my monitor package starts list null source ARP requests ever two minutes - explicitly directed against each of the five usable on the WAN subnet IP addresses. And they come from a MAC address address of the gateway in my ARP cache is not. I find the manufacturer of this MAC and see who is Alcatel. It is a time key, but it doesn't mean anything to me at the time. Of course, my SonicWall blocks these and hack attempts. I connect to the border router and put in place a firewall in the journal rule, but don't see anything. I guess that's because their router must not be able to record the ARP packets.

  More important still, however, my connection is more crashes after six hours. She stay up all night for the first time in 10 days. But the fact that things started working and there is no indication that a change had been made gives me no confidence that the problem has been resolved. Finally, I call the corporate number of the border and ask for the line of the complaint. Things happen in action. I get a call back from the regional manager in an hour. We exchange emails; I have him send a detailed explanation of the problem. He promises to get in touch with a network architect.

  But it will take some time, and I'm starting to wonder if it was the change of Netis in WAN Netgear switch that actually corrected it (even if not it is meaningless), so that night I put the rear Netis in place. But, like a dummy, I also disable regular gratuitous ARP and restart my router - so make three changes at once and ensure that I will have no idea who we intervene if things are going to come back down). This morning... it back down again, as before. And again, when I have emptied my ARP cache, I'm up. So I sink into the site at the beginning and move the Netgear switch in place and reactivate gratuitous ARP.

  An hour later, I get a call from one of the level 2 NT who worked on my case (via chat with level 1) early in the process. She says: "I went back to the case and was digging down through the chat logs. As soon as I saw ARP, I knew what the problem was, and I made the required change. "She explained that the Alcatel HAVE an option that should be activated when there are multiple WAN devices. In addition, my client's business is in the only place in the area where Alcatel terminals are still in use. Now at least I have someone who knows something and addressed to me, despite the fact that I was mean enough to buy my own router. None of the level 1 technicians I have met previously could even understand why - much less how - there could be more than one public IP address. One of them had even said, ' now you are chaining your router through ours, right? Nope. And maybe it's time this process 20 now-40 hours.

  Well, I have yet a full explanation why things started working at the same time I started to see the ARP requests from null which are supposed to be the cause of misfortunes, but I guess there is something different about six o'clock - on-demand and what I see now. The tech called me had no explanation why replace the network switch would have broken things.

  But he works right now and come about six hours since the last connection, so I should know shortly. Now I have the promise of a follow up directly from the Frontier network engineer and, above all, Frontier agreed to do without the Alcatel HAVE to an Ontario Calix - with which they have never seen issues ARP.

  And finally, now I know to search for "Alcatel" and "ARP" together on Google - and found all the specific answers that identify the question to the ONTARIO Alcatel in combination with class routers business. Maybe now I can get back to all of my other clients whose projects have been waiting the last week and a half.

  I'm sure that my life expectancy is just down by a couple of years.