Lost password Linksys after install new windows

Similar Questions

• Switchable graphics after installing new window. No ATI driver on the site of HP for Pavilion dm4 1140EZ

  Hello

  I had a problem with the black screen after logo window at startup. To solve it, I installed fresh windows 7 on my laptop Pavilion dm4 1140EZ. My laptop has Intel HD and ATI mobility Radeon 5000 graphics cards. On the HP site I downloaded the driver for Intel, but it lacked ATI driver for my product.  I went to the AMD site and downloaded catalyst control + driver for my ATI card but Intel graphics stops working correctly and graphic ATI did not work as well as on the Device Manager it has shown the device is functioning properly.

  After uninstall of Catalyst Manager Intel graphic it was OK. How should I me switchable graphics? My laptop is warming further than it used to be I think may be due to works on Intel graphics only the video quality is very bad. Kindly help me to install progressively switchable graphics.

  You can use the recovery media to reinstall the graphics driver AMD. Never install the Catalyst Control Center and the AMD driver. The graphics driver for a laptop with switchable graphics is specially coded to provide this functionality. Do not install the Intel driver separately because it would cause the feature switchable graphics to stop working. AMD owns ATI.

  

  Find the graphics card AMD driver software, click in the box to the left and then click on install.

  

• How can I install new windows on NB200-10z without a CD player?

  Hello

  I have a mini computer "Toshiba nb200-10z" and is no more startup.
  I would like to make a recovery, but it does not work.

  I know there's a shortcut like press 0 when the laptop starts.
  With this shortcut, you can start the recovery in order to reset the software.
  But when I press the 0 button it gives me an error.

  So I think that the recovery disk/partition is lost.
  How can I install new windows on this minilaptopUri without a CD player?

  Hello

  Try this procedure:

  How to recover a Toshiba notebook with the HDD recovery procedure
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If this does not work, you can try to install Windows 7 with USB flash memory key.
  There is a nice tool from Microsoft called Windows 7 USB/DVD Download Tool
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  You will be able to download (you will pay for the iso file) an iso file and would be able to create a bootable USB key.

  Here's a nice instruction how to install Windows 7 on USB
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
  but in this case you need a new installation of Windows 7 DVD
  ?

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• Satellite M70-340 - cannot install new windows

  Hello world.

  I had the problem in my laptop. DVD-RAM (mast * one device dvd ram uj - 841 s ata) not work and now I have problem to install new windows on my system! The my laptop do not support USB boot, I can't install USB also.
  I want to know how I can buy compatible DVD RAM for my laptop.

  any suggestion or website link, please add.
  Thank you

  Hello

  Are you sure that your CD/DVD drive is faulty? I want to say have you tried to boot from the Windows disc?

  Usually, you can order a new reader service authorized in your country. Guys offers a new drive and an Exchange if you n t want to do it yourself. Just give them a call or an email, I m that you can clarify this issue with them! :)

• I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

  I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

  How much it costs

  I need to perform a recovery for ssd only

  I need direct link for that

  Nice day.

  He was never a way I know of to download games Windows OEM Lenovo recovery disks. That the process is managed by Service, you'll need to contact them directly (see info below). If I understand correctly, they will confirm your OS by checking the serial number of your machine.

  I hope this helps.

  Kind regards.

• DeskJet f4180: always E error message and empty cartridge light flashing after installing new cartridge

  I always get the error message E and empty flashing cartridge light after installing new black cartridge.

  Welcome to the @vinylzappaforum!

  I read on the 'E' and the empty cartridge light blinks after I installed a new black ink cartridge. If you have tried the guides that I suggested in our other thread here, so the next step would be to call phone support at HP to discuss your printer options coming with them. I let the info below.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• After installing new cartridges, printer icon says printer is off line. Tried to go in the passage of the off-line online, without any change.

  The printer itself doesn't seem to be the problem. Have disconnected the cables, and the message is offline, offline. Reconnect and he said just in offline mode. This makes me think that it is a software that I'm not waking up switching.

  I did the online diagnostics and he thinks that the printer is turned off. But it's not. Were do form here?

  "After installing new ink jet cartridges.

  The problem began after you opened the printer.

  I suggest you contact the manufacturer of the printer.

  See you soon.

  Mick Murphy - Microsoft partner

• Printer does not print after installing new ink cartridges

  I have a Lexmark X 2500 printer. After installing new print cartridges, the printer gives me the error message to order more ink. The printer does not recognize the new ink cartridges that have been installed.  There is a warning on the ink cartridges to do not touch the contacts on the bottom of the cartridges. If this happens, how can I make them work?

  Richard

  You should contact Lexmark as they know their best products and we can onlu support of Microsoft products on this site.

• Can I reactivate a version of OEM Windows 7 after installing new mobo and cpu. If it isn't then why?

  My processor and motherboard in my computer are broken. I need to install new hardware, but I have an OEM of Windows 7 Home Premium version. Is there a way I can install the new hardware and start without any problem the reactivation of Windows 7?

  Non - OEM license is locked to the original motherboardm and may not be transferred, except when the change is made in conditions of warranty.

  You will need to purchase a new license for Windows.

• RESOLVED: Loop of reboot after installing new disks in RAID of PERC S100

  A customer has a Dell T110 (with a PERC S100 RAID controller) running Windows 2008 R2. The system has two disks: a reader not RAID (C :) running the operating system and a RAID1 drive (E :) sharing data with network folders.) We need to install again, larger disks for the RAID.

  I thought I could backup the data on the RAID drive existing (e), install new disks, built a new table in the S100 (VDM) virtual disk boot manager, boot into the operating system, create the new partition for the data replaced E: drive and copy the data back. This was not the case. After installing the new disks and the new array of construction (which is reported as "READY (R/W)" when starting, Windows starts all the way in "press CTRL-ALT-DEL to log". After two or three seconds, the system reboots. The same thing happens when I try to start safe mode. The system IS NOT automatically booted to the Recovery Console. He never seems to know that an error occurred and the system was not shut down normally.

  I booted into the Recovery Console, installed the drivers for the PERC S100 and run recovery to start without success. Also in the Recovery Console, I ran 'chkdsk /f E:\. ' (remarkably, the drive letter for the data drive remained the same), and no error has been reported. I also reinstalled drivers S100 of the recovery using DISM Console, but that changed nothing.

  I started to 8.1 Windows PE, installed drivers S100, formatted the virtual disk, copied the data which he, and everything works fine. The only problem is when I try to boot from the system drive (which has no problem) with the new installed disks.

  When I put the old records, the system boots normally with no reconfiguration required. The VDM to start automatically remembers the discs and the table. Nothing shows up in the logs event indicating that there was an error during startup. (Ntbtlog.txt) start-up newspaper, after several boots with the new drives in place, indicates that the system restarts at various times during loading drivers. There is nothing coherent in the startup log to indicate what the problem is.

  The only clue I have is that, during the startup, the VDM reports the virtual drive of origin as 'NORMAL (R/W)' and the new virtual disk as "READY (R/W)", but I'm not sure of the significance of this difference or if it suggests a solution.

  I can't find clues in all the newspapers about what may be the problem. If anyone has any suggestions, I will be grateful. I'll be especially grateful for the wacky suggestions.

  I ran it. Nothing appeared unusual. However, I does not solve the problem.

  I connect the new readers to the same SATA ports as the old records. When I connect one of them to the SATA port that had not been used as part of the original painting, the VDM S100 reported the original failed array, because readers were is more connected and showed the new table as a LOAN. The operating system then started normally.

  The trick, it seems that you should remove the old virtual disk before connecting the new disks on the same ports.

• iCloud error after installing the windows update 10 v.1607

  After you have installed upgrading Windows 10 to v.1607 (adding birthday) my icloud will not install on my Windows Office/outlook.

  I have deleated and installed the latest version of icloud, but I get a message that icloud is not installed correctly.  Make the repair on Icloud, but still does not work.

  After you remove or uninstalled, restart?

• 10 the desire: desire 10 cannot adjust the print size after installing new cartridge

  After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but find no way to adjust the size of printing... can anyone offer a solution... Thank you

  the solution: problem was with Firefox, when I switched to Chrome it prints perfectly!

• After installing new FN and multimedia keys do not work on Qosmio F20

  Hello, my friend buy Qosmio F20 of the Germany, but it comes with Windows Xp with the German language on this subject. I format the hard drive and install Windows Xp Professional SP2. I download all of the drivers who was very available and most of the functions work (like display, sound, touchpad and others), but the multimedia keys and the FN keys do not work (remote work). The other problem is that I can't install the TV tuner.

  With German Windows XP, I try TV tuner but have no SOUND what is the problem? When I try to install the utility software under display appear message that says "Unable to get the information from the BIOS" or something comparable. I have install all the drivers that I found in the Qosmio F20 support page but I have video control with exclamation mark in Device Manager.

  Can you help me?

  Where am I wrong? What should I do?

  First of all he must know that if you are going to install together the Toshiba drivers after installing the OS to do in the right order!
  On the Toshiba driver page, you will find the Installation Instructions. You will need to follow the guide line! It is important to properly work all the functions!

  In addition, you will need to select the right OS. There are two: XP and XP MCE.

  To control buttons Toshiba works correctly, you will need to install the controls.
  But as I said above: follow the instructions in the insulation.

  A few words on the TV tuner:
  As far as I know, you can only use the TV tuner in the country where the laptop was purchased because different PAN and NTSC settings.
  In addition, the TV tuner driver offers TV tuning and recording capabilities using Media Center on your computer. If you have any MCE so I put t know how you want to watch TV.

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.