Lost Photoshop of CC photography after upgrade to Lightroom 2015

Similar Questions

• Lost access to the volume after upgrade 4.1

  Setup

  1 x HP c7000 blade box

  3 x HP BL460cG6 with dual Xeons 5540 and 48Gb of RAM, cards ISCSI HBA, QLogic

  3 x HP P4300 Lefthands

  4 x 3020 Cisco switches for blade in the back the c7000, 2 x dedicated to iSCSI traffic

  vSphere 4.1 Server

  The problem

  We went through the entire process of upgrading our server for vSphere 4.0 to 4.1 to manage a stand-alone ESXi 4.1 system, so our attentions turn to our 3 blades running ESXi 4.0u1 we used the built in Update Manager, downloaded the 4.0 to 4.1 upgrade file and we have improved our first blade and it did not notice problems as there put servers have was little used those.  We then upgraded the second and moved our main mail on her server.

  It was when we did that we started getting errors when people were losing connection to the exchange server, after some research we've seen of the event and we have been to see the error:

  "Lost access to the volume because of connectivity issues."  Recovery attempt is underway and the results will be available shortly"

  Then 10 seconds later we get the message:

  "Successfully restored access to the volume due to connectivity problems."

  This error only occurs on the blades of 4.1, we have restored a blade on 4.0 and errors are not displayed and no errors were reported with the servers on this blade.  As far as we can say it is not a network problem since all blades for iSCSI traffic flows on the same switches to the Lefthands, and we were losing the connection to volumes on the two Lefthands.

  We have a call connected with HP about this, but from the Yes, we cannot determine what is causing this problem and how to solve.

  So any help is greatly appricated

  Thank you

  Dave

  This is due to a combination of ESX(I) 4.1, QLogic and version Lefhand SAN/IQ 8.5 with the 10092-00 patch version. I did a blogpost on his problem:

  http://yuridejager.wordpress.com/2011/02/07/lost-access-to-volume-error-with-hp-lefthand-san-storage-after-upgrading-to-vmware-vsphere-41/. I hope this helps.

• Audio clips mp4 not recognized after upgrade to CC 2015.1

  Just upgraded to CC 2015.1 on a Windows 7 Pro workstation. A former CC 2015 project file opened yesterday, received an error message about missing a missing MultibandCompressorCore.dll, saved as CC 2015_1, did a few editig, seems ok, and smooth. But today many clips are offline, when I repeat the tracks audio and audio clips are not recognized (screenshot). When I simply import the clips of same, there is also no audio what either is. When I check under change clip audio channels are grayed out. When I play the clips via Quicktime or Windows Media Player all sounds is there. I'm lost in the darkness, silence, please help.

  

  

  Exact same file on another workstation (with the same characteristics). One with and one without sound? Import the same video in After Effects and Audion works like a charm, the fable is there. What I'm missing here? A first adjustment?

  

  I had the same problem. What I've done. 1 / I chose all mp4 files in Windows Explorer. 2 / I created a new folder very close to the original (s) 3 / I moved the clips (without the cfa and so on...) for the new records. 4 / premiere Pro will be automatically "relocate" the missing clips when you reopen the project. And now, they have audio too. I hope this will help.

  Best regards

• Satellite Pro 6000 lost DVD/CD Rom drive after upgrade to win 2000 sp4

  Help, please! I have a laptop Toshiba SP 6000 and after download win 2000 sp4 on the internet have completely lost my CD-ROM/DVD-Rom drive. When I go to my computer and Device Manager it has a yellow I and following the warning "windows cannot load the driver that windows is unable to locate relevant data' and it has error code 31? I've been on the Toshiba site but don't know which update to take! I really need help.

  Hello

  Well, it the very strange question s. normally after the installation of the new operating system must be recognized the CD/DVD driver.
  I have studied in the web and find nice websites that describes this problem.
  Check this site:
  http://TechRepublic.com.com/5208-11183-0.html?forumid=89&ThreadId=181561&start=0
  http://support.Microsoft.com/kb/q270008/
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d; Q314060

  Good luck

  Good bye

• lost access to ISE GUI after upgrade

  I upgraded ISE 1.3 to 2.0, not only lost my integration with active directory, but also the local account of GUI. I still have access to the command line, but I know that the admin user/pass there are different than those of the GUI, but you can see them in the command line, but the command is different from the ordinary

  JOEblow username pass plain SOandSO

  If anyone can post a sanitized copy of the show run. user b, I anticipate that we could recreate credentials of the local GUI, the command line if you still have access to it. I don't know what is the exact command.

  This document below is specifically integration with active directory, but not this problem:

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/2-0/Release_notes/ise2...

  Cannot access the upgrade of the Post of the Page of the ISE Login to the admin user

  As far as I KNOW, only username syntax exists for ISE is to create the CLI user account and no gui.

  Here is the link to order

  ~ Jousset

• Why 5.7 Lightroom is not uninstalled after upgrade to lightroom 6?

  Hello

  I subscribe to creative cloud and I got lightroom 5.7.1 until yesterday. Today, when the update of lightroom 6 was available, I've updated. Now I see that there are two lightrooms on my windows (win 7 ultimate, 64-bit) - Adobe photoshop lightroom 5.7.1 and Adobe Lightroom CC.

  Question is why previous version 5.7.1 has not been uninstalled? Is there a reason? Can I keep both?

  Some clarification on this should help me do the right step forward.

  Thank you

  Girish

  No chance of corruption. The problem, you can see what your 5.7.1 LR catalog will not match your catalog LR 6.

  Again, this is why I tell you that you must use Lightroom 5.7.1 for 'real' work and 6 Lightroom for the test images, until you reach a point where you are sure that you will switch to Lightroom 6. Then you can upgrade the LR 5.7.1 Catalogue in LR 6 (new) usinf file-> open in LR 6 catalogue, and this new LR 6 will contain all 'real' work you did in Lightroom 5.7.1.

• How to uninstall Lightroom 5 after upgrade to Lightroom 6?

  After the Lightroom 6 upgrade, uninstall is not available for Lightroom 5 in CC. How to fix?

  Hello

  As you have already uninstalled lightroom utilities > uninstallers, here's what you need to do.

  Please remove Lightroom 5 you see in Applications > move it to the trash.

  • Manually uninstall Lightroom
  • Make sure that you back up a catalog

  Try to install Lightroom 6/cc after relaunch cloud creative app.

  Thank you

  Atul Saini

• Color of Label missing after upgrading to LR 2015.5.1.

  My workflow in Lightroom is essentially based on the flags and color label. After the last update LR 2015.5.1 any label of color have disappeared while the s signs always available. Should mean that all marked images are now no while flagged images are always reported correctly.

  I use creative cloud on Mac OS X 10.11.4 and did the update through the creative Application of cloud (as usual). My first idea was the issue could be assessed to the catalog. So I tried a backup of the catalog of before updating with the same result.

  Any ideas or advice?

  I thank you,

  Norbert

  In addition, select some photos that should be labeled and examine the label field in the metadata Panel:

  

  The fields are empty?

• Snow Leopard - external Photoshop retouching stops working after too many Lightroom edits

  Recognition of symptom:

  You make adjustments to a file in Lightroom and then you try and change in Photoshop CS4 using surface-mounted-> Comand-E.

  Nothing happens.

  You check the Console log and you see

  02-09-09 02:29:58 Adobe Photoshop CS4 [7706] * CFMessagePort: Mach corrupt prompted a fall (b 0, 00100)

  You back into history, to cancel some of your amendments to LR, and he ends by working again.

  Reproduction of bug:

  1. Making adjustments to a RAW in Lightroom - my 5DMKII case, canon raw or dng file
  2. Select the softener in skin (default settings) brush in Lightroom
  3. Paint on the image with several clicks (I've seen sometimes in 5 stokes and 20 shots)
  4. Occasionally check if command-E will bring up the image in Photoshop
  5. If so, exit without save changes and continue to apply the brush strokes and check again.
  6. If it is not the case, check the Console, and you will see the above error
  7. Now start on a brush stoke back in history and stay in control with the command edit
  8. In my case, it works once again a number of brush stokes finally have been removed

  I tried:

  • Re-install Snow Leopard on a disk wiping
  • Re-installing Photoshop
  • Re-installing Lightroom
  • Deleting the files preference com.adobe. < software > Photoshop and Lightroom

  NONE OF THIS WORKED!

  I also tried to edit the same file as a different user on the same computer and I DID NOT SEE THE PROBLEM

  There is a problem with something in my profile user, Snow Leopard, Lightroom and Photoshop, and I can't seem to find it.

  Anyone know what may designate the console error message?

  02-09-09 02:29:58 Adobe Photoshop CS4 [7706] * CFMessagePort: Mach corrupt prompted a fall (b 0, 00100)

  I spent THREE days on this... it's driving me NUTS!

  Any help would be appreciated.  Thank you

  
  

  I had the same problem, as I wrote in this post.

  I solved with Lightroom on 32 bit... Please tell me if it works for you.

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• Bootcamp (Win7) missing after upgrade to El Capitan

  My iMac early 2009 (one of the 4 Macs in my office) has lost his Boot Camp partition after upgrade to OS 10.11. the 1 TB drive keeps 783 GB as Untitled in disk utility, but the icon is missing from the office and it does not appear in the start window options.  I don't want to wipe o as Win 7 teacher was OEM and I Revit and Autocad licenses on it.  I can do something so he relocated it?  I have the same problem with my Macbook Pro of retina.

  Following earlier suggestions of solitaire T I ran the commands it suggests.  These are the outputs if anyone knows what they mean:

  Last login: Friday, June 3 09:41:15 on ttys000

  mkdir: /Users/fredbatterton/.bash_sessions: permission denied

  Contact: /Users/fredbatterton/.bash_sessions/FCC0EEE2-2E12-4555-A81F-8928ED3C4940.histor ynew: no such file or directory

  Mies-Van-Der-Rohe: ~ the fredbatterton list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 216,2 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 783,1 GB disk0s4

  Mies-Van-Der-Rohe: ~ list of cs fredbatterton$ diskutil

  No logical volume group CoreStorage found

  Mies-Van-Der-Rohe: ~ fredbatterton$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 422357176 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  422766816 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  424036352 1529487360 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Mies-Van-Der-Rohe: ~ fredbatterton$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-422357176] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [422766816-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [424036352-1529487360]

  Mies-Van-Der-Rohe: ~ fredbatterton$

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!

• Audio lost after upgrade to Vista on a Satellite Pro A120 PSAC1E

  Hello

  I just upgraded to vista and I lost my audio. I tried all the latest orders, still no luck. The pc says the driver is installed and the device works correctly, but I can't hear anything. Volume is 100% also.

  Any ideas?

  Well, first of all how someone should provide advice, if you n t write anything on the name cell phone you! ???
  Then please provide more details on your laptop!

  I noticed the same problem on the satellite U200. After upgrading from XP to Vista there is no sound, but the audio driver has been correctly installed and audio chipset has also been recognized correctly.

  After a long investigation, I found a solution here in the forum.
  First, it was important to increase the volume to the maximum with XP installed. Together sound controls must also be set to max.
  Be sure to use the RIGHT driver sound after the new installation of Vista.
  Not all drivers are working!

• CLJ CM1312 nfi: Scan function lost after upgrade to 10 W

  After upgrading to W10 my printer seem to have lost the option to scan. I looked on this forum but have not found an answer to solve the problem. I use the printer on a local network with different laptops. Other laptops are still on W8.1 and have no problem. Any suggestion to solve this problem?

  Hello

  Just to rply to my own message problem solved!

  Go to the microsoft store and install the app: Capture and scanning HP.

• Data lost after upgrade to Windows 10

  From Windows 7 to Windows 8, the address book and all the information has been lost. He did not return with Windows 10. A professional computer man could not find.  Help, please.

  Hello

   
  Please contact Microsoft Community.
   
  Please confirm this information to help you better:
   
  1. the application or the e-mail client you use. ?

  2. are you able to access the contacts folder by using the web browser. ?

  3. Apart from the missing contacts, it is able to send and receive emails after upgrade to Windows 10?

  Get back to us with the required information, we will be happy to help you.

   

   

  Kind regards

  Anusha