Lost service port IP console

Similar Questions

• Can someone tell me what this means? Keep appearing from time to time: unknown service (port 266877) starts on your Mac.

  Here's the whole thing:

  An unknown service (port 266877) starts on your Mac.

  If you do not change the settings of the firewall, the firewall blocks the connection to other computers

  to this service on your Mac.

  Then, there are these choices

  Allow all connections to this service.

  Allow local network connections.

  Deny all connections to this service.

  Do not change firewall connections.

  SBN application > launched

  Port 26877 (unknown service)

  Is there an Ant Norton/Symantec software installed on your Mac?

  If so, my suggestion is that you uninstall the Norton software according to the seller instructions to uninstall.

  Best.

• WLC service port

  Hi, someone has tried to use the service port WLC as a management port vlan and routed as well.

  Thnak you

  You have to, and you should also make sure there is no communication between the managememnt / interface ap - manager and the service port. If there is, you will have problems and that's why I never connect the service on the network port. If your direction is down... most likely your wlc is down also.

• Could create us some accounts connection service bus Web console?

  Hi all

  When we create a weblogic for OSB domain, we must provide an account (username and password) to access the service bus and weblogic Web console (example: username weblogic). And if we have three developers use this connection bus service account Web console, they can use Create/Active Session in the center of change to work. And they may encounter some conflicts when it is active a task, then could create us three account for these developers to access the bus service Web console?

  Kind regards

  Going to happen because of the cache of the browser. Try to connect with a user in a browser (let's say firefox) and with another user with a browser (IE) different or better yet, try to connect to different machines using different users. You shouldn't face this question then.

• Change in the Studio's web service port

  Hello
  
  did anyone know, where I can change the web service port 9000 in Oracle BPM Studio?
  
  Thanks for your help!
  
  Kind regards
  Matthias

  Hi Matthias,
  I already told you how do it, but I'm posting for the rest of the population:
  I didn't know a place in the Studio to set this up, but I can't givo you workaround.
  Change your engine.xml you should have in your eclipse workspace: ProjectName/config and the basis of the file, you have an entry that is wsListenerPort. Put these lines:

  
  
  

• Pavilion g7 - 1117cl: lost usb port in the laptop

  My wife tried to update to Windows 10.

  He has totally failed and 'lost' the drivers for the USB ports so that she cannot use her mouse.

  We spent MANY hours on the phone with Microsoft as they took control of the laptop and tried to fix it.

  Finally they told us that they believe there is some sort of virus on the disk, they can not delete? and that the laptop should have something on the 'partition' on the disk.

  They were not very clear about this, but he told us to contact HP.

  Our warranty has expired.

  Given this, if I do an original factory reset this will fix the problem or a virus caused a wrong to prevent a resumption of this way?

  Microsoft seems to think that a reset would not fix the problem.

  The laptop came with all the discs.

  We are NOT any sort of expert on computers, so we do not understand much of what they told us and we had problems to understand the accent of the person who was working on the issue.

  @Dfaris,

  Thanks for posting back.  Yes at this point, you will need perform a recovery of the plant on the laptop.  He's going to wipe the drive clean of any possible bad guys and set it back to the original configuration.

  Here is the link to help you with that.

  HP computers - performing a recovery of system HP (Windows 7)

  Thanks again for the post and have a great day.

• Get TCP Service Port number name

  The TCP listen and the TCP create listener screws have an entry named 'Service name' base, once a listener is created in the LabVIEW application is it possible what service named is running on which port in an external application and query? The external application may or may not be developed in LabVIEW.

  TCP exits create listener VI the port number used, this is useful information, but I don't see any automatic method for an external application to get this information?

  C++ getservbyname function does not return the information given to the listener of LabVIEW TCP known, created and listen.

  The help of LabVIEW:

  name of the service creates a reference known for the port number. If you specify a service name, LabVIEW saves the service name and the port number with the of Service Locator OR.

   

   

  OR Service Locator:

  http://digital.NI.com/public.nsf/allkb/227453F884CE035386256E55007A303D

• port bug console virtual iDrac 2.21.21.21

  Hi all

  We have a R430 with an idrac 8.

  We need to access the virtual console, and for many reasons, it must be that its port is different from the default (5900), let's say 5905.
  Everything works fine with the 2.15.10.10 firmware.

  Today, we updated the firmware with lifecycle controller v.2.21.21.21 and the virtual console a work stoppage: when Java runs, after a few seconds, a warning window appears with the message "the network connection fell.

  We tested it without a firewall or other NAT between, so we think it's a bug of the 2.21.21.21 version.
  With the new version, the virtual console only works if the port is configured to 5900.

  We did a restore to version 2.15.10.10 and everything works fine again, also with a non-standard port.

  Anyone with the same problem?

  Good bye

  Hello

  I just tested it and could not reproduce the problem. Have you been able to reproduce this on another system?

  I would like to start by trying a new port number that has not been used to see if it could be a caching problem. If the problem persists, then reset the iDRAC to default values to generate a new configuration file. The file was corrupted during the update of the firmware.

  Thank you

• Pavilion, A8M2N - LA, lost usb ports

  I have a Pavilion a1637c I reinstall Win XP on it.  The recommended HP drivers & updates for XP listed here see the BIOS A8M2N - update v 3.10 (sp35111).   It's the 1st update, I tried after XP & his SP2 set.  Now, I've lost the use of my USB ports!  The bios has updated to version 3.10.  I know that the usb ports worked initially because I had loaded the 3,10 flash bios from a usb key.

  I tried to reset the bios to its default values, but it seems that now version 3.10 is the new default.  Is there a way maybe to return to an earlier version of bios?

  I have a card Asus A8M2N - LA NodusM3-GL8E with 4 memory slots.  I saw messages on other models using the other Council A8M2N with links to a flash of the various bios (example here).  Since I'm half messed up already, I hope for a little advice to completely avoid bricking box of this lady.

  Thanks for any help you can offer!

  Well, now I feel like such a dummy...  I started a chat session of support with the support of hp, and his suggestion was to have windows to reinstall the drivers for the usb device.  and now all the usb ports seem to work like a champ.  I feel so bad that this box has gathered dust for that long, that's all what I had to do.

  I hope that others can learn from this!

  After the execution of the sp35111 video update & bios, you may need to use the device mgr and update the drivers for the usb ports controllers, etc. windows.

  You guys thank you for the response back.

• the service of monitoring console

  In the past, with 3.0, we just installed our officer monitoring right in the service console and monitor disk space (for example) on the service console.  With 4.0, is there a better way to do it?

  Yes, I would recommend the Service Console of surveillance. You want to make sure that you don't have a reason any fill the local file system and ensure that it is healthy to you could potentially run into problems with virtual machines. In general, I saw c SC all kinds of funky but virtual machines are always blowing along, that tells you how stable the hypervisor and vmkernel is... .and how he does not rely on the SC for running virtual machines, but it limits your view on the host in terms of management say pass / vpxa processes that may be running.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Service in ESX4 console

  Hello to all,

  Ho una curiosity.

  SE non erro nelle previous installazioni esx era possibile decidere di (con it partizionamento advanced) to creare o meno Reed the vmfs partition.

  Adesso invece che ti seems ESX obligations a crearlo subito per poterci mettere sopra the console service.

  ForSE era Così anche prima e ricordo male... di non ricordo my aver visto may he file vmdk della service console... illuminatemi

  Ciao e grazie

  ESX 4.0 con it disco della COS e a che deve stare vmdk knew UN VMFS.

  He problema e che viene creato UN VFMS automatically (sul disco che viene visto prima o su quello Dove TR e scelto di fare the sommergibili) con i parametri di default... e quindi 1 M di block size e quindi VM con vmdk max di 256Go!

  He consiglio, to TR use storage local big e farsi due brain software, uno uno e piccolo formattare dopo (cosi e pure allineato) by the VM 'fat '.

  Andrea

• (Beginner) Service of ESXi console... .free version?

  Hello

  Thank you for taking the time to read this...

  Is there an equivalent free in the Red Hat "Service Console"... perhaps as a version of Fedora/CentOS?

  And,

  If you guys have any advice - or - recommendations that isn't already in Raid 5 configuration documentation (ESXi hosting multiple operating systems), I would really appreciate it.

  (I was using VMware Server & prepairing to switch to ESXi)

  Thank you!

  You can use devices RCLI or vMA (aka VIMA) to administer your ESXi hosts.

  Not really... at least with the free version of ESXi, you will have only read only access that doesn't give you a lot. Take a look at this article: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/ and Yes, it extends to something newer than ESXi 3.5u2/u3

  If you license ESXi at least the license to the Foundation, then Yes, you can use vCLI, vMA, PowerCLI to manage your ESXi hosts, but if you use the free version you will no CLI access to manage. You can still use the vSphere Client GUI.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• lost services!

  Hello
  We recently did a clean reboot on our other computer to understand a problem.  When we return to normal restart it restarts without a lot of services.  Now, we cannot have the internet, or information system or help and support, Device Manager, etc.  We have no idea how it happened.  Our internet is really important for us on both computers because our children do their school online.  We tried everything, but we can do any operation troubleshooting because we cannot use the help and support service.  Laughing out loud. Well not really lol.  but in any case, thank you for looking and I hope to help!
  J

  MMO
  We just restarted windows and now everything works fine.  We had much trouble with our two computers so we just did them as well.  Thanks anyway
  J

• Test Service Console EM down

  I have a new installation of EM Cloud Control. Due to the configuration of the firewall after installation, I needed to change the HTTPS to the Web service port, default 7799 to 9043.
  
  After the change of the EM Console Service Test ist marked as inactive, the error messages States that the connection to the port 7799 is refused. Of course, it is, because I changed the port as described in note (EM 12 c: how to change the HTTP and HTTPS Upload & Ports after Installation of the Console.) [REF 1381030.1]) to Metalink, however I can't find how to set up this test, so that it uses the correct port, or how to restart that goal. Obviously, the howto to Metalink is not enough...
  
  If you want to see the screenshot for the error messages:
  https://picasaweb.Google.com/LH/photo/BUbketrVX_7QYmy-mnWcQ5cWWB303H40N4sglnemewg?feat=DirectLink
  
  So how do I fix this, so that the test is shown as running, without having to install everything new?
  
  Ciao, Gerrit
  
  Published by: Gerrit Haase on 08.03.2012 17:14 THIS

  Hi Gerrit,

  You can change the URL for the Service of Console test in the page ' Edit Service: EM Console Service test ":

  -Nagivate to targets > Services
  -From the Services page, click Service of Console EM
  -Click on the Configuration of the Analysis tab
  -Click Service trials and tags
  -With the EM Test selected Service Console, click on change
  -From there, you can continue to change the URL for the step to access Logout

  Kind regards
  -Loc

• Port console SRW248G4

  Hello

  I want to configure my SRW248G4 switch via the console port. Unfortunately, in this option, there is no console RJ45 port entry, I don't see what port cosole resemble RS232 input. I bought two cables of the standard console cisco with one end with the db9 and one RJ45.

  Now I have and idea to put one end of a cable (db9) to switch and a second end (db9) cable in my computer (input/output COM)

  I need connect two RJ45 - this isn't a problem, I know how to do this. Here's the question:

  I know how pinout in my computer look like but I can't find the port pinout console in my SRW248G4. There are a lot of images in Internet, numerous Cisco devices, but it does not work. Maybe in LINKSYS different pinout? Anyone has experience with this subject and can help me?

  cordially Wilq

  Hi Marcin, the pinout for this console port is the standard db9 pinout.

  

  -Tom
  Please mark replied messages useful