Loud grinding noise and vibration: HP Pavilion G6-2313AX

Similar Questions

• Pavilion 15 p248ne: loud fan noise and vibrate

  Hello, so he started to happen when I move the laptop one day (when it's on) fan me all of a sudden very hard and the laptop everything vibrated, it sounded like the fan was touch something running which makes vibration and noise, it sounds exactly like this https://www.youtube.com/watch?v=QkCLubSukzI I fixed it by restarting the laptop (sleeping too work looks like everything that makes the fan stop) but now It happens randomly, the normal fan noise has changed and there sometimes as fort again, as demonstrated in the video and then I have to restart to fix it. I tried to open up the laptop, but a few screws were too hard and stuck lol so I gave up. and I cleaned the vents of the dust.

  Hey @amro2,

  Welcome to the Forums of HP Support!

  You mentioned that you hear a thud and the HP Pavilion Notebook - 15-p248ne vibrates when this happens. You thought that it sounded like the fan touched something in rotation. I also watched the YouTube video that you had provided for me. This was very helpful! Thank you.

  Perhaps one of the possibilities is that the fan should be cleaned.

  Even if you had not indicated that you do not encounter any problems with the heat, there is a document called a Fan is Noisy and runs constantly. This document has troubleshooting steps that may help. I realize that you don't have more intermittently as you a question on a regular basis, however, the steps described in the document can lead you in the right direction for resolution.

  I'll provide you with HP Pavilion 17 Notebook FHCP Pavilion 15 Notebook PC Maintenance and Service of Guide for your reference.

  If none of the steps above help, and the laptop is still under warranty (please use the auditor of the guarantee if you are not sure), I wouldn't open Notepad. While opening the laptop should not void your warranty, if any damage is caused during the process without contacting HP Support then it can void your warranty. If you are still in warranty, please use the following link to create yourself a file number:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  If none of this information helps you to a resolution, please share it with others by marking the post appropriate as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  Thanks for joining in.

  Have a wonderful day!

• OfficeJet 6700 gear grinding noise and paper jam

  When turned on, our 6700 OfficeJet 6 - months, goes through the boot process, makes a gear grinding noise and finally stops with an error message of paper jam.  I went through all the steps to remove a paper jam (there was no paper to clear) except the cleaning rollers.  It of as if the gear in the duplex unit is not quite the tail with his partner in the printer, but not sure.  I checked to make sure that the rollers turn freeling.  The duplexer gear is a little tight, but it does not move.  Any ideas?

  It seems that this printer has developed an internal problem.  From the sounds of it, the issue is the release mechanism for the transport of the print head.

  There is a document to help out the noisy operation found printer here.  This can have a few extra steps for troubleshooting paper jam you have already done.

  I would also try re-allocation of places the duplexer if she appears out of alignment.  However, if the problem persists, then it will be a hardware problem that the next step is replacement of the product.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• Loud fan noise and bluetooth does not not in hp pavilion 1322tx g6

  Hello guys... I have a problem in my computer hp laptop pavilion 1322tx g6. 1 is when I turn on the laptop, the fan produces annoying sound and vibrate too. After about 5 minutes, it goes back to normal.some dayes ago, I started playiing Medal of honor warfighter. Although playing fan became stronger, but I thought it was normal. but now on start fan is too loud and vibrates too...

  My second problem is that my bluetooth is not working. I downloaded and tried all the driver bluetooth http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5227785&... this link but it says no bluetooth device found or something like that. None of them work.  !!

  Please someone help me!

  Hello again acidburn. I did a little research and according to this site which Hardware ID refers to the "card of Bluetooth of Broadcom 20702."

  Another search was this driver for this chipset. It is not listed as being to a specific cell, but you should give it a try.

  Install the driver I've listed above and let me know if it installs correctly bluetooth driver and he gets rid of this "unknown device".

  I wish you a nice day!

• My brand new in Officejet Pro 8600 made a loud grinding noise.

  I just installed a new brand of Officejet Pro 8600. At startup and before each print job the machine makes extremely loud noise grinding. I took out and replaced ink cartridges, but that did not help. Is this normal? Someone at - it suggestions?

  Hello Martin,

  Contact HP Support.  It is not usual to a grinding noise when printing each page.

  * If you are in the United States, the toll free # is 1-800-474-6836.

  * If you are not in US, then go to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Photosmart 4785 printer: printer Photosmart 4700 series began a loud grinding noise yesterday

  I cleaned paper feed, reset the cartridges, unplugged and ran without paper in it.    All with no difference in the sound.

  It's that sound terrible when ready to print, and then it prints very well.    No problem with printing, just this awful noise and any future warning in the printer.      What should do?   Thank you

  Hi @jla4,

  Welcome to the HP Forums!

  I understand that your HP Photosmart c4785 printer makes a noise loud pounding. I am pleased to see that for you!

  I recommend going through this guide, Error Message "on paper" and the printer is not Pick Up or paper feedand watch this video:

• I'M HAVING A PROBLEM WITH MY OM NOISE AND ACOUSTICS MY PAVILION DV 7 PORTABLE

  I'M EDDIE ST. ROMAIN AND I HAVE a PAVILION DV7 CTO 6100 SERIES NOTEBOOK AND THE PRODUCT NUMBER IS QB648AV AND THE NUMBER of SERIES IS [personal information deleted] AND MY OS IS WINDOWS 7 64 BIT AND I AM HAVING a PROBLEM WITH THE SOUND AND AUDIO I NOTE THAT if I look AT THE VIDEO of NEWS OR I don't HAVE NO SOUND OR AAUDIO IT COME IN AND OUT AND BREAKING AND the AUDIO IS AS STATIC AND THE PICTURE IT START AND STOP AS IT AUTOMATICALLY PAUSE ON IT OWN WITH ON ME NOTHING I NOTICE TOUCH CELA THESE LAST TIME AND I'M ALL EARS ON THIS PROBLEM AND ALL SUPPORT IN WHICH I CAN GET OUT THIER FROME SOMEONE I'M LOST HERE TRYING TO UNDERSTAND THIS POINT IS WHAT THIER MAY BE SOMETHING WRONG WITH MY SYSTEM HERE OR MAY IT HAS SOMETHING TO DO WITH HAVING A DIAL-UP ACCESS BECAUSE IT IS WHAT I HAVE I AM OPEN TO ANY SUGGESTION TO THIER TO HELP ME GET THIS PROBLEM SOLVED ONCE AND FOR ALL AS SOON AS POSSIBLE I LOOK FORWARD TO HEARING FROME SOMEONE IN REGARS ABOUT THIS PLEASE. MR. EDDIE ST. ROMAIN

  Hello

  Please remove the serial number of the position since its considered to be personal information.

  Ru trying to watch the news online, if so, then yes its due to dial-up access.

  For videos (as in watching videos) streaming on the internet, you need a faster internet connection as a connection high speed.

  Try playing videos on the system as in the sample videos folder if it plays very well I suppose that the system should be fine.

• Help with fft vibrations without using the package of noise and vibrations

  I'm looking for help in the analysis of vibrations. I use an example updated NI 9233 VI, to get a signal from the accelerometer for display using a FFT power spectrum. I'm not entirely sure if it works, because it's the first time I've ever done vibration analysis on LabView. So if you could explain a thing or two about vibrations or TFF, I'd be more than willing to hear from you. I have included my code along with a photo of an analysis of vibration of the computer, I work with. (even when I don't know if his work that I just thought it would be good to show an output)

  Brandon

  Data sheet:

  I have LabView 2011

  I FPGA, real-time

  I have a model of research of Wilcoxon accelerometer 797-33

  With an NI 9233

  On a cRio-9012

  Hi Brandon,.

  You can use the FFT Complex (photo attached) to calculate the magnitude of the acceleration at different frequencies. You will need to take a little further to build a new waveform with this release, which includes d0, df and the output of the FFT. In order to calculate the df, please refer to the user manual on page 10-3. With respect to the scale that is output by the FFT, it must be same as input. Hope this helps to answer your questions. Thank you!

  See you soon,.

  CARISA Leal

• HP Pavilion G7: Fan of grinding noise?

  Hi, I have a HP Pavilion G7, and he had problems with fan for a few months now. It will start making a grinding noise and sometimes disappear. Lately, however, it has not disappeared. I removed the keyboard and tried to suck dust, ran some tests system, pilots resettled... nothing works! In addition, it is certainly the fan, not the hard drive. Need help please, without this computer, I can't do my homework, continue to save games.

  Hey @PyreticFyre ,

  I would check the implementation of the fan, just to ensure something does not rub. I would also test the HP Diagnostic as it can help to diagnose a piece failed hardware in the laptop.

  Thank you.

• Satellite A500-025 - high and loud fan with some vibrations

  MY new Toshiba has its fan cooling at the top with a vibration when I turn on the computer first.
  After about a minute the fan speed goes down as does the noise and vibration of the fan.

  Y at - it a bios upgrade or adjustment on the A500-025 to prevent this?
  It almost looks like when you first turn it on, the fan setting is high then then adjusts.

  Thank you.

  > Y at - it a bios upgrade or adjustment on the A500-025 to prevent this?
  > It seems that when you first turn it on, the fan setting is high then then adjusts.

  This happens in my portable fans too and as much as I know there is nothing unusual
  This does not happen always, but each time when the laptop fell very long and if the temperature is higher

  I think that fans run faster for a few seconds to release the dirt among the cooling modules and calibrate the speed once again
  I wouldn't be worried is this fan behaviour maintained only for a few seconds

  Welcome them

• Practical measurement "sound and Vibration Assistant.

  Hallo,

  ICH möchte eine Maschine von Gerauschemissionen untersuchen. Dazu soll mit Hilfe der Norm DIN EN ISO 11201 der emissions-Schalldruckpegel altitute werden. ALS Messhard-und software are mir following components available:

  Software:

  -LabVIEW 2010
  -Noise and Vibration Assistant 2010
  -Windows 7

  Material:
  -NI 9234 Messsystem mit NI USB-9162
  Condenser-Mikrofon
  -Laptop

  ICH möchte mit dem 'Sound and Vibration Assistant' ein Oktavspektrum bzw. Ein 1/3 - Oktavspektrum-> Terzspektrum aufnehmen. Dazu sind mir ein paar aufgekommen questions.

  -Laut Norm is die Messdauer bei measurements in 30s Oktav-Terzbandern fur Frequenzbander mit Mittenfrequenzen von 160 Hz low sowie für die 15s und Frequenzbander mit Mittenfrequenzen von 200 Hz und high.

  • Wenn ich alglemein eine measurement starte andert sich jede Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden 51, 2K das all Spektrum von samples. Also jede Sekunde ein neues result. Wenn ich also 30 Sekunden mass, means are dann, dass ich aus 30 results (Pro result ein entire Terzspektrum) den Mittelwert bilden kann bzw. muss?
  
  
  • Wie ich dann die unterschiedlichen Aufnahmedauer auf die Frequenzbander anwenden should? Should ich die highest frequency und niedrigste frequency q und dann der Zeit messen vorgegebenen correspondingly?

  -Laut Norm should as jedes Frequenzband eine Pegeldifferenz von mind. 10db zum Umgebungsgerausch available breast.

  • Also ich z.B. das Hintergundgerausch über 30 Sekunden mass. Dann jedes Frequenzband über 30 Mittelwert den Werten as image. DAS same mache ich dann bei Betrieb der Maschine. Kann ich dann die dB values direkt miteinander comparisons sprich Gabriel bilden die um zu sehen, ob die Pegeldifferenz 10dB kleiner oder grosser ist oder muss ich eine Logarithmische Pegelsubtraktion paper? nach der Formel section = 10 * lg(10^0,1*L1-10^0,1*L2) z.B.?

  -Wenn ich den aquivalenten Dauerschallpegel Leq messen möchte, die Die Formel Gesamtmessdauer wo mit einfliesst, wird dann der Mittelungspegel über eine Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden samples von 51, 2 K berechnet oder ist das result über die ganze Messzeit (wieder 30 Sekunden z.B.) berechnet worden? Oder ich aus den werten eine weitere Mittelung paper individual should?

  Viele Grüße

  Hallo Voyage200,

  Wenn ich alglemein eine measurement starte andert sich jede Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden 51, 2K das all Spektrum von samples. Also jede Sekunde ein neues result. Wenn ich also 30 Sekunden mass, means are dann, dass ich aus 30 results (Pro result ein entire Terzspektrum) den Mittelwert bilden kann bzw. muss?

  -> Should der Arbeitsspeicher gross genug breast ware are ermöglichen das auch Signal 30 Sekunden gepuffert mit dem mittelfristig-Verbraucher-Entwurfsmuster appears und die exported analysis often.

  Wie ich dann die unterschiedlichen Aufnahmedauer auf die Frequenzbander anwenden should? Should ich die highest frequency und niedrigste frequency q und dann der Zeit messen vorgegebenen correspondingly?

  -->--> Als Tipp Ja am examples of Anfang arbeiten mit den einfachen und Express VI. Powerful exported Programmieren mit den Low Level VI.

  I hope sharp Antworten helfen Ihnen weiter

  und verbleibe mit thank wurde

  Lorenz Casper

• Audio examples and vibration - activate or not?

  Hello

  I am a student and I use the evaluation version of LV I am playing with audio examples and vibrations, but I don't see the block diagram only the façade. It says to activate LV. Need to activate the OAS tool to see examples block diagram or is there a trial version?

  Hey Charlie,

  Please see the following knowledge base:

  http://digital.NI.com/public.nsf/allkb/862567530005F09C8625675F00711756?OpenDocument

  If you are using the evaluation version of LabVIEW, 'you will not have access to diagrams of screw not available in the basic development systΦme."

  Your options are:

  1. buy the sound and Vibration Toolkit (and LabVIEW so),

  2 buy the version of LabVIEW Student install of the Student Edition (only this version includes noise and vibration measurements): http://www.ni.com/labviewse/compare/

  You can check with your University/College to see if they bought the box tool.

  Hope it will be useful,

  Norbert

• ProBook 4530 s: grinding noise near the vents when I turn on the laptop.

  Sometimes when I turn on the laptop, a loud grinding noise is heard from the left corner, near the vents.  I think that's probably the fan.  I turn off the laptop because it doesn't seem like grinding stops.  Then when I turn it on again, grinding noise disappeared.  The fan needs to be replaced, or when the fan needs to be replaced?  Is this easy to do?

  Alternatively, the problem could be something else?

  MContrary wrote:

  I see that there is a video on YouTube for laundry s my exact machine, HP ProBook 4530 fan.

  I guess I'll try to do that, but the noise I hear is very strong, as something very bad is grinding

  This could be the lack of fan or some a little debri is inside the unit that should not be there.

• HP Pavilion g7-2270us: HP Pavilion g7-2270us dvd drive no work and make noise and open habit

  my cd/dvd drive has stopped reading discs, and then for good measure he has decided to stop the opening and started making a noise that sounds like it is trying really hard to turn the disk. but just can't.  When I press eject, there is an another complainant grunt loud noise and refuses to open, and then tries to turn the disc

  the refusal of the opening that happened so I tried different disks to see exactly what it would not do.

  Thank you Jesus, I bought an extended warranty at FRYS for three additional years.

  of course it does not cover the screen is broken... but vizio is great.

  everyone having this problem

  the system is64bit and the driver for the cd is a 32-bit... and why the pilot ancient... Since 2006?

  The driver for the cd isn't as drivers for other devices... it's buried deep in the operating system in a layer that is probably there since Windows 2000. Your drive has failed and needs to be replaced. Are you sure that Frys extended warranty does not cover the screen? Some of them have no protection against accidental damage.

• hard drive noise and grinding

  Hello

  my computer gets slower, and I think that the reason is the hard drive. disc grinding as a crazy and making noise and I was thinking to replace it and I turned to you for advice what to do until replacing it and the procedure after you put a new one in detail my office is

  Processor Intel pentium 4 2.8 GHz with Hyper-threading technology

  512 MB pc 2700 DDR SDRAM memory

  160 GB-7200 RPM

  Ultra DMA hard drive

  DVD + RW/CD-RW

  Engraver of DVD and CD writer combo

  CD-ROM drive

  48 x max speed

  NAVIDA Ge Force 4 MX 440

  AGP 8 x graphics card with 64 MB

  DDR memory and TV output

  I know is too many details but I hope you and thanks for all the help.

  J.... H

  More memory is always good, but it depends on what you use your computer for.