low-cost router with DHCP 66 option

Similar Questions

• Difference b/w PIX & router (router with the firewall option)

  Hi all

  I want to know that how we can differ with router (router with the firewall option) PIX bcz can also make Staefull packet filtering. What PIX device that reviewed by the customer to use PIX of the router.

  Thank you best regards &,.

  Guelma

  Hello

  There is a discussion in this forum on this topic; Check "Firewalling: PIX vs IOS Firewall" last conversation was released January 10, 2006. Let me know if it helps.

  Rgrds,

  Haitham

• Low cost storage with replication of table

  Alrighty, I hope this one gets a few good answers.  I have a friend of mine who is looking to start its virtualization of its current server room.  Now this isn't something fancy at all I think the more they can be to virtualize servers 15 + and they want to be able to have things like the DRS/HA and so on.  Now the big part of this is we are eager to have a kind of replication in the case of a DR.  Storage with what they will probably be software iSCSI due to further reduce costs.  Now, I have some experience with the help of Open Filer but from my research, I could not know how the functionality of replication table or much less put in place.  I have also worked with HP Lefthand, but I'm not sure of the cost through a license and so on. After virtualized local storage would be best for us to go with regard to budgeting and so on.  I expect comments and recommendations and your experience with storage solutions the.  Appreciate any feed back!

  Kind regards

  Chad King

  VCP

  "If you find this post useful in anyway please give the necessary points.

  Hello chadwickking,

  Falconstor solutions http://www.falconstor.com/ do you check or Open-e? http://www.open-e.com/

  Perhaps this product can help you.

  
  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  Best wishes / Saludos

  ________________________________________

  Ing. Diego Quintana ! http://www.images.wisestamp.com/twitter.png! [! [ http://www.images.wisestamp.com/linkedin.png!: http://ar.linkedin.com/in/diegoquintana]

  vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  UNETE al grupo Virtualizacion Español en LinkedIn

  My Linkedin profile

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• Model of router with WPS

  Hi my TV a WPS button my router N300 model [WNR2200] has no WPS button. What router do I need to connect to broadband?

  Any router with a WPS option. Or use your router and enter the appropriate security settings.

• Measurement of low-cost input analog (4-20mA) with data acquisition

  Hello

  I would like to have a very low cost measurement system loop which I can plug in my laptop current:

  I have a load, which is connected to a circuit of air conditioning/signal booster, which output a 4-20mA. I want to measure this current loop signal.

  An idea for the lowest cost system? I think that the most NOR DAQ are too expensive and too exaggerated.

  I have LabVIEW.

  Use of remote sensing current low-value resistance, then measure the fall of voltage through it with the help of an acquisition of data 6008/6009?  They have about $150.

  You will probably need to amplify current-sense with a MAX4372 or similar resistance to achieve a result that allows you to use a reasonable scale on data acquisition.  I measure the current through our products in almost all of our equipment to test in this way.  The size of the resistance of meaning as a result.  The 6008 is accurate enough, but it is not the fastest nor well presented.  But starting at $ 150, they are hard to beat.

• Low cost brushless three-phase amplifier

  I use cRIO to request control phase brushless motor three specialty.  NOR has a NI 9505 module for control of motors brushed.  I have not found one for brushless motors.  There are a lot of controllers of third brushless motors integrated in the market.  Will not work for me.  I need to directly control the cRIO output transistors.

  I guess I'm looking for a low-cost three-phase bridge amplifier.  The low cost is necessary because it will be part of an OEM product.  The engine is rated at 40 volts and 10 amps.

  Does anyone have any suggestions?

  Here files gerber and the source files of origin for the Council that I built.  It was designed by EagleCAD, and the final design is drive1.brd.  I don't think that there is an error with this review of the Council, it should be good to go if you built it this way.

  Others that some of bridge-on-chip solutions that I found, there was no option for the units silent, low-power (disks without built control logic in).  Because I wanted to do my own development of control algorithms, it meant that I had to either crack open a trade route or build my own.  Of course, I went the second route.

  Good luck.

• RV320 as SBS2011 router as DHCP server and use IPSEC

  p {margin-bottom: 0.25 cm; line-height: 120% ;}}

  Our society is really eager to acquire a VPN Cisco RV320 router to replace our old insecurity only PPTP VPN-router. Before actually buying the router, there are a few questions I'd like to have answered.

  In our current setup, we have a SBS2011 standard Server which is used as a DHCP, DNS, Exchange, and SMB server to our network of the company, all the peripheral functions within the same network (192.168.0.1/24).
  We would like to add the RV320 to our network to allow access of employees to the corporate network when they are at home or on the road using IPSEC VPN (client site).

  In our current configuration us use (or used) a VPN router and VPN clients allowed to acquire an IP address from the PPTP server, these IP addresses have fallen in a range that the DHCP SBS2011 server was free to distribute the. It's quite simple actually

  How can we configure the router RV320 so that there will be any conflict between the RV320 router and SBS2011 Server regarding distributing them IP addresses to the VPN IPSEC clients?

  Can configure us the RV320 to transfer earlier requests DHCP server SBS2011?  We want all customers (including IPSEC VPN clients so that they enter the same network).
  Is it possible to simply using the DHCP-relay option (in the web interface) and entering the IP address of the server SBS2011?

  We should disable the DHCP on the router-RV320, or is there another way to continue using the SBS2011 server as the DHCP server, while allowing client-to-site IPSEC VPN for access to our local network?

  Thanks in advance

  Hello and thanks for the exam Cisco for your network needs.

  First of all, I understand that you are used to working with the PPTP connection and now you want to switch to a more secure IPSec connection.

  It's a great idea, but there are a few things to consider:

  1. the RV320 supports the IPSec VPN via the Cisco VPN Client 5.0, you can download it from the site Web of Cisco if after you buy a contract for the router.

  The contract will set will cost about $70, depending on where you decide to buy it, but it has several features including 3 years of telephone support 24/7 and next day replacement guarantee for business if the unit doesn't respond, it also allows you to download special software like the Cisco VPN Client.

  2. for client VPN connection, you can not, or you need to try to relay the DHCP request what, whether the router will handle it and he will probably be on a different subnet from your local network, but it will you access to all devices on the network.

  3-If you do not want to buy the contract, then you can always use PPTP to the RV320 and it will give you the same access that you are already accustomed.

  I hope that was helpful, please let us know if you have any other questions.

• Edge router with CUCM/Tel Telepresence SX10 Server Mirotik / Tel conductor

  Hello

  I have a client with 15 sites connecting with Mikrotik router-Board of Directors.

  I have to questions of implementation, in this network, a video-conferencing solution with:

  15 Telepresence SX10, one for each sites

  CUCM

  Cisco Telepresence Server

  Conductor of Cisco Telepresence

  The Cucm, Serveer telepresence and the conductor will be installed on the main site.

  Thank you

  Yes, I also prefer this option if your go direction CUCM because he has already included as an option for CUCM licenses (multiparty license of Cisco) and lower costs.

  Kind regards

  Acevirgil

• Wired router with POE and Gigabit ethernet to run two AC1750 access points?

  Hello, I'm looking for a recommendation for a wired router with POE and Gigabit ethernet to connect to both access to ceiling LinkSys AC1750 points internet routing on the WAN to a Virgin Media UK cable connection plug - can someone advise a good solution?

  I'm a Home Office / Small Office so user there are several Wired's devices and a mixture of wireless clients. I need at least 8 ethernet outlets. Reliablity and speed performance are important, but not important enough to go overboard on the cost!

  Many thanks to you all.

  I recommend a router Linksys (SMB) LRT214\224 and a switch POE LGS Linksys (SMB). This combination will be very fast and stable.

• Low-speed Internet with wired connection to E4200

  I have a HP Pavilion p6347c AMD Athlon II X 4 630 2.80 GHz, 64 Bit, Windows 7 SP1 WITH 16 GB of Ram, using Comcast high speed Internet.

  It works very well and I had no problem with my Pavilion until I replaced my old router G with a LinkSys E4200 (state-of-the-art, the top page of the router line N).  All the features work well, except that when I use Firefox 7.0 or Internet Explorer 9.0, the connection time is very very very slow when my computer is connected to my router with an Ethernet cable.  The problem disappears when I log - in using the same Ethernet cable - directly into the modem high speed; Then, the loading speeds are fast as lightning.  When I return to the router via a wired connection, even - page very very very slow post.

  I've already spent about 8 sessions with LinkSys on the phone and chat, and it turns out that the router is not the problem (according to LinkSys).  They advised that I need to contact the manufacturer of the computer, or people who can respond to Windows 7 support issues.  Someone at - it ideas?  Maybe something I can change in the settings of the firewall, network, computer security options settings?

  I connected my HP laptop running WINDOWS VISTA on the same Ethernet cable and disabled the wireless.  The speed of the wired connection is quick as a Flash - no problem at all.

  Then why my desktop Windows 7 SP1 computer not offer me the same speed?  Whenever I need to do important online work, I have to unplug my Ethernet cable from the router and plug directly on the modem to get faster speeds.  I then reconnect to the router once completed, so that users without wire and devices on my network work.  It's very frustrating.

  Help!  I am at a loss to understand why this computer has not faster to the Internet when wired to the router.  Is - this Windows 7?  There are some options that I need to change?  Someone at - he heard talk about this and you offer solutions?  Appreciate any assistance.  Thank you.  / Jacques novel /- [email protected]

  P.S. Customer LinkSys was no contribution to this issue.  I hope that some tech "warned" this reading will say AH-HAH and offer a viable solution.

  On a hunch, I selected the reset 'Factory Defaults' option in the Administration, after having updated the firmware. Something must have been damaged during the first attempt to install the router.

   

  To reset the default settings, you must have the original Setup disk and re-install using the same router name and the password.
  

   

  When this was done, the Ethernet connection worked perfectly.  Hope it will be useful to all having the same problem.
  

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• GRE tunnel with DHCP address on 871W

  I'm putting in place a tunnel WILL I can send updates of routing and QOS between the sites. Now, we have a 2611XM and a 871W. How can I set this if the 871W router uses DHCP to the Wan (2611XM is a static address)? I'm suck trying to figure out what to do for the "tunnel" on the 2611XM destination.

  PNDH allows peers to have dynamic addresses (ie: Dial and DSL) with GRE / IPsec tunnels.

  What you do on the 2611 is to configure the tunnel love mode, and on both sides, you configure PNDH so that the 871 record with the 2611.

  When you use this with ipsec, you can for example configure QoS groups in ISKAMP profiles.

  http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios124/124cg/hiad_c/hadnhrp.htm

• Cisco IOS DHCP Server + classless static routes on DHCP clients

  Hi, I tried to find if it is possible to add the ability for static routes to DHCP clients on the Cisco IOS DHCP configuration mode. I'm looking to add a parameters as defined in RFC 3442, like this one, located on the ISC DHCPd server:

  Global settings:

  121 = integer table 8 code option rfc3442-classless-static-routes;

  ms-classless-static-routes option code 249 = integer table 8;

  And for the subnet declaration:

  option rfc3442-classless-static-routes 24, 192, 168, 30, 192, 168, 10, 1;

  option 24 ms-classless-static-routes, 192, 168, 30, 92, 168, 10, 1;

  Is this possible?

  Thank you!

  Vitor

  Yes, the fun part it is to convert it into a format IOS will accept.  You can try:

  IP dhcp pool 0

  option 121 24.192.168.30 ip 192.168.10.1

  option 249 ip 24.192.168.30 92.168.10.1

  If this does not work, change the "intellectual property" for "hex" and each of your decimal byte converted to hexadecimal.

• Problem with DHCP broadcast between VLAN

  Hello

  I trying to solve the lab that I set up, I have a problem with broadcast between VLANS with my DHCP. I looked around the vmware community to find my answer, but I did not who is right why I post here!

  So here's my situation :

  • ESX with 2 race of VM:
    • An R2 of 2012 Windows running a DHCP server with a configured scope
      • This virtual machine is assigned to the vmnic4 with the port VLAN 100 group
    • A Windows 7, which I use as a customer
      • This virtual machine is assigned to the vmnic4 with the port VLAN 110 group
  • Switch Cisco with a simple configuration:

  interface FastEthernet0/1

  Description LINK FOR ESX

  switchport mode trunk

  switchport nonegotiate

  interface FastEthernet0/24

  Description OF LINK ROUTER

  switchport mode trunk

  • Configuration of the Cisco "router on the stick:

  interface FastEthernet0/0.100

  encapsulation dot1q 100

  10.1.1.254 IP address 255.255.255.0

  interface FastEthernet0/0,110

  encapsulation dot1q 110

  IP 10.1.2.254 255.255.255.0

  IP helper 10.1.1.0

  
  

  The resolution of the problems that I did:

  • Affecting the client static IP and that both virtual machine can ping each other
  • Moving from the client to the same VLAN as DHCP server, and the DHCP server is to give the client an IP address.
  • Sniffing the packet:
    • I can see the client DHCPDiscover
    • I can see the router with the command "debug ip dhcp server packet" package passed on the 10.1.1.0.
    • I am not able to see the packets from the router to DHCP perspective

  That's why I guess miss me something ESX configuration.

  Thanks in advance for reading this post!

  
  

  PS: I've linked a vswitch configuration screenshot
  

  I think that you have configured an incorrect address of IP support, take a look at the following line:

  IP helper 10.1.1.0

  
  

  Your DCHP server is really 10.1.1.0? I think not, since 10.1.1.0 corresponds to the ID of the network 10.1.1.0/24 network.
  

• lower costs

  Hello

  I have a PalmOne, Zire 31. Looking to download games while I'm waiting at the Office of the drs (so to speak). If the package saids its its for Palm OS - is - it say that it will work for my pda--thank you very much for your help...

  Hello darlened and welcome to the forums of Palm.

  Most of the time, if an application or a game is written for Palm OS 5, it will work with your Zire 31.  That said, the Zire 31 is a Palm device low cost and has all the same features of the more expensive Palm PDA Tungsten E2 and TX.

  I suggest that you download and install the version of a demonstration/test before buying it and confirm on the website that the Zire 31 is supported.

  Alan G