low speed on wifi network

Similar Questions

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Samsung wireless surround does not work with Airport wifi network

  I have a smart tv with a Soundbar and wireless - all Samsung two speakers. I should be able to set up surround sound via the network wireless like this http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 629802 & modelname = WAM7500 & modelcode = WAM7500/ZA

  It works fine when it connects to the router provided by my ISP sky. But when I try to do the same when connecting to the network created by the airport, it won't work no-more precisely, I'm unable to select "link Multiroom' (step 19 in the link above).

  Note: There is no problem connecting to the wifi network - it's this last step which is the issue.

  Any ideas as to why this may be the case?  I need to use the extended network of the Hub of sky wifi is very low when the TV is.

  Here is the configuration...

  Router-> Airport Extreme-> Airport Express-> TV + Surround Sound

  (Airport extreme is the bridge mode value and the expansion of the wifi network Express).

  Thank you

  Jeremy

  TV: Samsung UE40H6400

  Soundbar: Samsung HW-K650

  Rear speakers on your TV: Samsung R1 2

  I'm not familiar with Samsung wireless speakers, but let me see if I can help. What is the brand and model of your router provided by Sky? You have configured to provide a Wi - Fi network? Is the Wi - Fi network, provided by the extreme and extended by the Express, a second wireless network with a different SSID or using the same SSID as provided by the router from the sky?

• How can I configure my Time Capsule (its predecessor) as an extension of WIFI network?

  I have the previous model of the time Capsule and a new version and two MAC computers. I want to use the Capsule of ancient times to extend my WIFI network. I have a MAC with a new current version of time Capsule in the center of my house. I have a second MAC set up with an earlier version of a time Capsule in my office. I want to expand the network from the center of my home, further, beyond my office. Anyone know what I need to do? THX!

  Place the old TC in the same room as each other.

  Do a factory reset.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Open airport on the Mac utility and configure the old TC... it will automagically want to extend wireless.

  Complete the installation, then move the TC to a suitable place where it picks up good signal from the main TC. There is no need to a position of bad signal... then place it where the speed is close to full... but then covers your current area of dark (wifi not light).

  Fact... Voila... easy as pie.

• Z370 cannot detect any wifi network to all the

  Hi, my ideapad z370 suddenly stopped detecting any wifi network. I know this isn't my wifi router that has the problem because my ipad can connect to wifi. any help? Thank you very much!

  Hi j1986,

  Welcome to the Forums.

  You can try the following:

  1. press Fn + F5 to activate the wireless card (make sure that the current status is set on "ON")

  

  2. relying on Fn + F5 is unable to turn the wireless status on, make sure that the physical wireless switch is on position ON.

  

  3. If the same problem, boot into the BIOS by pressing F2 at startup and make sure that the WLAN device is enabled.

  

  4. If you still cannot detect wifi networks, open Device Manager (press Windows key + R) and then:

  -Go to the ECS network

  -Right click on the wireless adapter and select uninstall

  -Right click on network adapters, then select Scan for hardware changes and check for availabel wifi networks

  5. If not, try to reposition the connectors wireless in the lower part of the PC (see page 42 of the HMM)

  

  Hope this helps

• Get the IP addresses of the devices connected to the WiFi network

  Hello guys,.

  I've been looking around and trying to understand this point, but I don't have a solution. The problem is to get the local IP addresses of all devices connected to the WiFi point of access/router connected to my BlackBerry. Similar to the way in J2SE nature you can get the IP using InetAddress.getLocalAddress () and then browse ip addresses and call InetAddress.getByAddress (ip) to check whether the device is accessible. Possible is something similar in BlackBerry or not?

  No, the fault was entirely mine, I misread your message.
  no idea how to do that, there is no access from low level of the network interface and the API is really limited.

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.

• iTunes crashes if its wifi network does not have access to the internet

  Hi all.

  I'm running a 13 "mac book pro with OS X El Capitan.

  I have a very specific problem of iTunes which is really bugging me.  I'm a pro saxophone player and part of my job is performed as a soloist with playbacks on my mac.  To avoid having to walk to the mac to start the track to accompany each song, I use a tablet on a stand that I can place anywhere in the room.  I've set up a router next to the mac that the mac and the tablet of connect to, and I run "retune" on the Tablet (I think it's that his name) which is a wifi iTunes remotely.  Installation is really smart cos he allows me to choose new avenues of selection from anywhere in the room instead of walking back and forwards to the mac every time.

  The problem I have is that sometimes maybe (1 to 5 times), I have a real problem from iTunes when the mac is connected to a wifi network that has no real internet connection.  I'm sure that iTunes detects wifi connection and then tries to access the internet to connect with the store.  When he is not in the store it just crashes and I get the spinning wheel of death.  Most of the time, I can simply restart the program several times and finally he decided to play ball, but it's a real pain.  And I did a concert yesterday where he would not have enough, no matter what I did.  If I had no choice but to turn off the router and keep walking to the mac for each song.

  I can't find a setting anywhere on iTunes that can disable the connection to the store and I really am stuck.

  I also tried alternative programs (I used Clementine briefly but I just found it too flakey to be invoked) and so I am open to others suggests.  But I need a player who has a remote app that I can use on my tablet.

  Thanks in advance for the help.

  I use an older version of iTunes and in the preferences a lot, I can disable Store, Radio, sharing services, probably genius if I got it. Check all your preferences settings including those you think don't matter such as parental preferences (this is where the store is hidden on mine).  Realize also that iTunes has turned into a simple multimedia player to a 75% of sales and marketing as well as the do-it-all tool (aka bloatware) try too many at once and developers can't even imagine someone (i.e. the daily target user) use it without Internet.  Add on that you try to use an application to control iTunes and something like that is likely to misbehave, willy nilly whenever Apple launches an update.

  Don't forget with wi - fi you are subject to interfering signals other wi - fi services in the region or the stage equipment.

• No display wireless or WiFi networks

  I got iOS 10 since I was a notification for the update. But this morning when I tried to sync new music in my iPhone 6, my internet has suddenly disappeared for some reason, I thought it was my router so I decided to reset my router, it has not solved anything. So I decided to reset my network settings, that nothing happened also. Then I tried to erase everything from my phone and make up the whole as a new phone, nothing happened. Now, I decided to downgrade my phone to iOS 9.3.5, the problem still don't have resolve.

  I know that the fact the my router is not act because the iPhone of my 5s sister who is on iOS 10 is connected to our internet connection. IPhone my mother 6 s is also connected to our internet connection. So, what would be the problem with my phone? Because neither it connects or even show any wifi network. (It is proven because I went to my aunt's House to check if it is possible what our router, also rendered to a mall to check always nothing happens) I hope someone can help me.

  Thank you

  Hello

  It may help to follow the steps detailed here:

  • If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
  • To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

  Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:

  • Recommended settings for the WiFi routers and access points - Apple supported

• Look on OS3 connects to a public wifi network, that has a connection to the Web page.

  in the United Kingdom, we have a public wifi network called "_the cloud", which is free to use, but requires that you register for a free account.

  Once signed, the phone will automatically connect when you are next in the range.

  It seems that since the release of WatchOS3, the Apple Watch will connect now to this public WiFi even with the phone turned off or in flight mode. Suggesting it is connected to a Web page by its self.

  It seems to me that it is only this a public wifi network that does this now, but can't figure out how!

  Great news in any case, I hope that more public wifi networks completely agrees!

  If someone else in the United Kingdom that uses 'cloud _L' public wifi could test this point too, that would be great. I hope that we could get an official comment from Apple?

  https://support.Apple.com/en-GB/HT204562

  

  Hello

  Thanks for sharing this information.

  Recognition wrote:

  .. I hope that we could get an official comment from Apple?

  It is a community based on the user. If you want to ask Apple about this behavior, contact UK options include:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/UK/retail/Geniusbar/

• How to connect my Time Capsule to a WiFi network?

  Happily, I use a Time Capsule for years as a WiFi router connected as a bridge to the router provided by my supplier.

  Now, I'm moving to a place where internet is already provided by an access point in my new apartment and included in the monthly cost of the facilities in this village. The access point is hidden behind the ceiling of my apartment and doesn't have any port ethernet except the one used to get the internet. WiFi which will be available for me is configured by an administrator with the name of my apartment.

  My internet needs TC that the ethernet source and I wonder what I could do to work around this problem. I don't see any option in the settings of TC to connect to an existing WiFi.

  While waiting to move to the new apartment, I did a test by trying to create a scenario similar to the House, for example by using the wifi router of my provider to create a wifi network, then using an extension of WiFi that is connected to A WiFi network and connect my TC via ethernet connected on WiFi extender set up my TC as a bridge and the creation of a WiFi B with my TC that I can use with my devices. It works fine, but I wonder if there is something I'm missing or a better solution or possible issues related to this configuration.

  Tnxs.

  My internet needs TC that the ethernet source and I wonder what I could do to work around this problem.

  In a Word, nothing. The TC must connect to a network by using a wired Ethernet cable connection. The only exception to this would be a Workbench where you already have a router Apple providing a wireless signal, in which case the TC can connect wireless to "extend" the network.

  While waiting to move to the new apartment, I did a test by trying to create a scenario similar to the House, for example by using the wifi router of my provider to create a wifi network, then using an extension of WiFi that is connected to A WiFi network and connect my TC via ethernet connected on WiFi extender set up my TC as a bridge and the creation of a WiFi B with my TC that I can use with my devices. It works fine, but I wonder if there is something I'm missing or a better solution or possible issues related to this configuration.

  This is how the TC must be connected to the network of the apartment. If your extension does not work with the network of the apartment, an AirPort Express could be used to 'join' the network wireless of the apartment, and then provide an Ethernet connection to the Treasury Board.

• WiFi Solution - only wifi network

  Hey

  I live in Israel and how I get internet home is via a special modem that is also a router, this whole box is called HotBox.

  The quality of this refrigerator is VERY bad, but it's the only way to get internet here...

  Since I was little systems in my house requiring some specific open ports (smart home hub and dvr security cameras) the hotbox is really bad with the opening of the ports so I had to do a bridge inside mode, so it works as a modem and connected on it (some not expensive tp-link I'll change with time) an extra to work as opening and router port solution router.

  so far, it works fine.

  The House is large in the territory and I thought the best solution to extend the internet into an area away from the House, the basement which has thick walls and wifi signal is difficult to achieve...

  The inside of the wall, I have an ethernet cable that goes from the main tp-link router in the basement and there I connected a time capsule Airport (model 2014 if it made a difference, the new type of orders one) which gives wifi in the basement and an additional airport specially for the single harder.

  Everything works fine but a small thing, in the upper part of the House, I have Tp-link network (say 1) and in the basement, I have a different time capsule (Network2) wifi network.

  My question is how can I do the work of the entire system on a single network?

  I have to do the time capsule as a bridge or configure it somehow differently?

  Or is it still possible to do?

  Thank you very much for your help in advance!

  My question is how can I do the work of the entire system on a single network?

  Change the name of the network wireless on the Time Capsule so that it will be exactly the same as the name of the TP-Link network.

  In the example below, you can see the name of my wireless network is TWNDB. If I wanted to change the name, I change / move back the current name and then type the new name I wanted to use.

  

  I have to do the time capsule as a bridge or configure it somehow differently?

  The Capsule should already be configured in Bridge Mode if it has been implemented correctly, who calls Apple 'Off (Bridge Mode). If it isn't, then you must change the setting on the network tab, ensure the Capsule is in 'Off (Bridge Mode).

  

• Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  On my iMac, there is an icon for a list of available to join Wifi networks.

  One of these Wifi networks is my iPhone Personal Hotspot.

  However when I look at my setup on my iPhone Personal Hotspot is off.

  I tried to join the Hotspot to my iMac and put.

  This is part of a feature called Hotspot instantly. It allows you to connect to your personal hotspot without your password or activate the hotspot on your phone. Don't worry, this does not allow other people to access your hotspot, only devices using the same identifier Apple will see your hotspot. This feature is not using any extra battery life when you're not connected to it. You can learn more about instant Hotspot here: OS X Yosemite: connect to the Internet using instant Hotspot

• My early 2015 retina 13 '' Macbook pro intermittently "hang" on a wifi network in my house

  Problem: My early 2015 retina 13 '' Macbook pro intermittently "latch" on a wifi network in my house.  Which means, if I'm on my 2.4 GHz network, it works very well and then randomly - while remaining always connected to the wifi network - will lose its ability to connect what be it for 30 seconds to 1 minute. This occurs every 5-10 minutes. If I go to my 5 GHz connection, it works very well for 5-10 minutes. I keep having to switch back so that it could respond more quickly, or let them hang for a minute until he figures it by itself.

  Meanwhile, I can connect with my iPhone, Windows laptop, Xbox, computer, etc. without any problems. If I take my macbook in wifi areas, I have never run into this issue. I don't really know what to do, and faced with the conclusion this problem online - as it is a very specific set of variables causing problems.

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• My wifi network does not connect automatically

  Hi all

  im a user frustrated.

  My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

  I also deleted the list of networks do not forget and do it again. Any help?

  Much appreciated guys.

  

  create another user account and start to this account, set up a wi - fi connection and restart to this account.

  Is the same behavior?