LUN copy, LabManager backup

Similar Questions

• Difference between the backup of database to copy and backup of database

  Hi all

  Kindly differentiate between backup database copy and backup of database.

  Thanks in advance.

  Hello

  With image backups, you have the option of two things:

  1. use these as rman backup and ask to restore them to the desired location (the same that we do in restoration of backupsets).

  2. tell the database to use these files.  This is possible by ' switch database copy. This is useful when the recovery will take a long time.  This allows you to move the users directly to the backup that you restore to the original location.  In other words, your database remains open with the users who access the copy.

  in both cases, you would:

  1 restore a controlfile

  2. the backup catalog

  RMAN > catalogue start with noprompt "/ backup location, in this case copy data files."

  3A. If you want to restore the database, so you might as same as usual:

  run

  {

  Set up until...

  newname Set...

  restore the database...

  recover the database...

  }

  ALTER database open resetlogs;

  3B. If you want to "switch" to the backup, you must run:

  switch database to copy;

  recover the database up to the...

  ALTER database open resetlogs;

  NOTE: before open resetlogs, remember that your online log file location is valid for the server on which you are restoring.  See:

  Select Member from v$ logfile;

  Thank you

  Renu

• ISCSI LUN can support backup VMWare Consolidation?

  Dear all,

  ISCSI LUN can support backup VMWare Consolidation?

  Could help you find some documents for this?

  Thank you

  Dennis Dai

  see page 22 of http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_vm_backup.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Any of my music or playlists copied from backup disc appears when I open iTunes.

  I followed the instructions of a certain number of responses from discussion to this help page. I followed the steps following (according to the help instructions) without success:

  1. On destination macbook pro, I did drag the iTunes folder from Home/music on your desktop
  2. During the backup of the source (external drive, Time Machine backup folder), I copied the iTunes folder and...
  3. .. .pasted in the Home/Music folder on destination macbook pro
  4. Once the files have been copied, I opened iTunes, but no music was there, apart from purchased iTunes music. No playlists.
  5. I have read the thread replies
  6. ITunes started while hold down alt/option to choose the library; Music/iTunes open on destination mac; selected iTunes Library.itl and click on it to open it. Still no music or playlists of this folder.

  I see all the music files in the new iTunes folder that I copied from a backup. A reflection as to why they are not displayed?

  Try the empty/corrupted after upgrade/crash iTunes library.

  TT2

• Cannot copy old backup on new hard drive

  I can't copy my old backup to a new hard drive directory by dragging the old new th diving in such Finder recommended by Apple.  There seems to be some controversy about how to accomplish this task.  Instructions would be appreciated.

  Did you follow the following steps:

  https://support.Apple.com/en-GB/HT202380

  to the letter? If so, what was the error message?

  C.

• Are there problems with the copy a backup of one old drive to another?

  After buying a hard drive TB Seagate external 3 to make backups, I conclude that, because of differences in sector I can not create a backup image to the new drive.  I did an image backup on my Toshiba 1.5 TB and then copied the file to the new 3 TB drive.  While it is a pain, for the moment, I don't see anything around him.  Are there problems with it?

  Another question: If there is a question, is there a way to write the image of the file on the drive that works and then all backups incremental file at CT 3?

  Hello

  Because you can't save the picture of the system directly on your 3 TB hard drive, you can save on your 1.5 TB hard drive, and then copy it to 3 TB external hard drive.

  If you want to restore, you can restore directly from your hard drive 3 TB.

• How to COPY a BACKUP as the... CONTROLFILE can be used for the OPEN database

  I create a document such as a "How To" to move a position for a Junior DBA controlfile.

  But it seems that I'm the Junior because I am facing the following...

  Action plan:

  Move/rename a Controlfile

  Version of the database: 11.2.0.3

  Controlfiles moving of:

  / goldengate/ORCL/ORADATA /.

  TO:

  / GoldenGate/ORCL/controlfile

  Step 1: Set up environment variables

  $> export ORACLE_SID = ORCL1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $> echo $ORACLE_SID ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORCL1 $> export ORACLE_BASE = / u01/app/oracle ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $> echo $ORACLE_BASE ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- / u01/app/Oracle $> export ORACLE_HOME=$ORACLE_BASE/product/11.2.0.3/dbhome_1 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  $ echo $ORACLE_HOME

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  /U01/app/Oracle/product/11.2.0.3/dbhome_1

  Step 2: Check control_files parameter

  $> echo "see THE PARAMETER control_files | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- VALUE OF TYPE NAME ------------------------------------ ----------- ------------------------------ control_files string/goldengate/ORCL/ORADATA/control ol01. CTL, / goldengate/ORCL/ORA DATA/control02.ctl

  Step 3: Closing the open database

  $> echo 'SHUTDOWN IMMEDIATE'; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The database is closed. The database is dismounted. ORACLE instance stops.

  Step 4: Editing of the database

  $> echo "STARTUP MOUNT"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORACLE instance started. Total System Global Area 4275781632 bytes Bytes of size 2235208 fixed

  822084792 variable size bytes

  3439329280 of database buffers bytes

  Redo buffers 12132352 bytes

  Mounted database.

  Step 5: Creating a copy of the current controlfile

  $> echo "AS BACKUP COPY CURRENT CONTROLFILE FORMAT ' / goldengate/ORCL/CONTROLFILE/control01.copy.ctl'; ' | RMAN target / nocatalog ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Recovery Manager: release 11.2.0.3.0 - Production Fri Oct 22 17:03:27 2015 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: ORCL (DBID = 1420762587, is not open) using the control file of the target instead of recovery catalog database RMAN > From 22 October 15 backup allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID = 58 type of device = DISK channel ORA_DISK_1: from data file copy copy the current control file tag name=/goldengate/ORCL/CONTROLFILE/control01.copy.ctl output file = RECID = 1 STAMP = 893783011 TAG20151022T170329 channel ORA_DISK_1: datafile copy complete, duration: 00:00:03 Backup finished at 22 October 15 RMAN >

  Complete recovery manager.

  Step 6: Change of parameter control_files

  $> echo "ALTER SYSTEM SET control_files='/goldengate/ORCL/CONTROLFILE/control01.copy.ctl' SCOPE = SPFILE;" | sqlplus-s "virtue sysdba". -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Modified system.

  Step 7: Closing of the mounted database

  $> echo 'SHUTDOWN IMMEDIATE'; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORA-01109: database is not open The database is dismounted. ORACLE instance stops.

  Step 8: Installation of the database

  $> echo "STARTUP MOUNT"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORACLE instance started. Total System Global Area 4275781632 bytes Bytes of size 2235208 fixed 822084792 variable size bytes 3439329280 of database buffers bytes Redo buffers 12132352 bytes Mounted database.

  Step 9: Check control_files parameter

  $> echo "see THE PARAMETER control_files | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- VALUE OF TYPE NAME ------------------------------------ ----------- ------------------------------ control_files string/goldengate/ORCL/CONTROLFILE/c ontrol01. Copy.CTL

  Step 10: Open the mounted database

  $> echo "ALTER DATABASE OPEN"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ALTER DATABASE OPEN * ERROR on line 1: ORA-01589: must use RESETLOGS or NORESETLOGS option of database open $> echo "ALTER DATABASE OPEN NORESETLOGS"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ALTER DATABASE OPEN NORESETLOGS * ERROR on line 1: ORA-01610: recovery using BACKUP CONTROLFILE option must be

  Then...

  $> sqlplus/nolog ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SQL * more: Production release 11.2.0.3.0 the game Oct 22 17:14:43 2015 Copyright (c) 1982, 2011, Oracle.  All rights reserved. SQL > CONNECT sysdba virtue ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Connected. SQL > RECOVER DATABASE with the HELP of BACKUP CONTROLFILE until CANCEL; -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ORA-00279: change 621941 September at 22/10/2015 16:57:33 needed to screw 1

  ORA-00289: suggestion:

  /U01/app/Oracle/product/11.2.0.3/dbhome_1/DBS/arch1_11_892981851.dbf

  ORA-00280: change 621941 thread 1 is in sequence #11

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  Cancel

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Cancelled media recovery.

  SQL > ALTER DATABASE OPEN;

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ALTER DATABASE OPEN

  *

  ERROR on line 1:

  ORA-01589: must use RESETLOGS or NORESETLOGS option of database open

  Issues related to the:

  What am I misunderstanding? BACKUP COPY THAT isn't really a COPY.

  Why I can't use the 'copy' of the controlfile created by RMAN?

  Note:

  If I just copy the controlfile to the new location when the database shuts down everything works fine.

  Thanks in advance.

  Juan M

  
  

  Recovery Manager (RMAN)

  It is also mentioned in https://docs.oracle.com/cd/E11882_01/server.112/e25494/control.htm#ADMIN11288

  Create additional Copies, rename and move the control files

• VMFS LUNS of tape backup,

  Hello

  We have 9 servers to ESX 3.5, a SAN HP EVA 8000 and a proxy server backup of VCB windows 2003 using arcserve

  Is it possible to save a VMFS LUNS set on tape, we can save individual using vcb and it works well, but we need to have a full tape backup VMFS LUNS?

  Is this possible and if so, how? I'm sure I'm missing something obvious?

  You MAY be able to get Replication Solutions Manager to describe the VM snapshots before a SAN snapshot. Or you could use a mirror Clone and save it like that. But the question will read the VMFS. You can add a "helper" ESX Server, but I don't think there's Arcserve software that could be installed in the Central Office.

  The great thing is why you want to do? Is there a problem with VCB? Maybe you could add another VCB proxy if your backup times are achieved. If you go down the path of SAN backups based, make sure that you can recover. more likely, the backup will be consistent down.

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• I can't copy my backup files saved in Firefox. I have in the folder.

  When I opened Firefox this morning, Ask.com had returned to the site of Firefox. I closed and reopened Firefox and a window appeared asking me to update and I did. That got rid of the Nick of Ask.com , but all my favorites have been transferred to a folder on my desktop. I tried all of the solutions in the support site and if all the files still appear in my profile, I can't get back them on my
  Opening page of Firefox. Help!

  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac = < Command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions. Ask to remove
  Whatever it is. Now do the same in the case computer programs.

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  You may have ad / bad-ware. More information can be found in the article troubleshooting Firefox problems caused by malware .

  Run most or all of the listed malware scanners. Each works differently. If a single
  program forget something, someone else can pick it up.

  After the problem is resolved, bookmark and use this.
  Download the Mozilla search reset {web link}
  This module is very simple: when installing, it backs up
  and then resets your search and home page preferences
  at their default values and then to uninstall. This
  affects the search bar, search bar URL, and the home page.

• How to copy/clone/backup plsql-package (another name)

  I have the package (and package body) called P. Now, I want to create the script that clones/copies this package under the new name of 'P_COPY '. How to do?
  Package 'P_COPY' must have the same source code package 'P'.
  Package 'P_COPY' should be ready to run.
  
  --
  
  I use Version 10 g.
  
  Published by: CharlesRoos on August 10, 2010 06:49

  Use the DBMS_METADATA. Function GET_DDL, then you will get a CLOB returns with the source code in it. Change this code source (using DBMS_LOB or other) as needed, and then submit it back to the database to create your new object. If it is low)<32K) or="" you're="" using="" 11g="" you="" can="" use="" execute="" immediate,="" but="" if="" it's="" larger="" than="" 32k="" or="" you're="" using="" 10g,="" you'll="" have="" to="" use="" the="" dbms_sql="" package="" to="" split="" the="" clob="" up="" into="" pieces="" and="" submit="" it="" to="" be="">

• Problems with the backup copy

  New time capsule, try to copy the backup to the new airport. Instructions on the Apple Support site seem simple, but I'm missing something. I suspect that this is how I'm connected to the capsule, 99% of the time that it is WiFi.

  Here is the link to the apple site I use for instructions.

  https://support.Apple.com/en-us/ht204078

  I am able to connect the original airport time capsule base by the first 2 steps stations.

  I am able to stop the back-ups on the time capsule original airport

  I am able to complete steps 1-3 on "copy backups it to the new airport Time Capsule"

  However, I have no idea what step 4 ways.  After step 3 in the finder window, I see a yellow folder called data.  If I double click on data, makes that step 4 complete?  If I double click on the data of the finder window is titled 'data' at the top in the Center, but there is nothing in the main window (name, date modified, etc.)

  'Step 4 Mount airport Time Capsule original volume in the Finder by double-clicking'

  So if that is correct, and I go to step 5, 6 and 7, I end up with the same thing on the new airport tc finder window.

  I do not see that anything that is called a backup disk image to drag on.   I don't know what I'm missing.  The only thing I think it's that I'm connected to the CT via wifi or Ethernet cable, which is connected.  (I have an Ethernet cable connected directly from my time capsule org on my mac.  "But I do not have the active wifi, I do not see my tc).

  I don't see a green light on my LAN port on the time capsule. This tells me that even if it is connected, it does not work. I tried searching through the support of apple for solutions.  But there must be an easy way to get to work without being a guru of Ethernet network.

• Copy the folders (backup) of a connected USB device

  Hi, is it possible to copy (or backup) the content of my (NMH305) mediaserver to a USB HDD connected directly to the media server? I tried the utility 'copy' in the file browser, but it will not copy in files on a connected USB device (by clicking on the "copy file" button does nothing).

  Is the USB key to your aid in format NTFS or FAT32? If it is in NTFS format, then it could be the reason why you can not write to the USB plugged into the USB port of mediahub. Some linux-based devices do not work well with NTFS format. Try a FAT32 formatted drive into the USB port on the mediahub.

  See you soon.

• The copy of RMAN backup format

  Hello

  use the following rman block to take incremental backup to recover.

  run{
  allocate channel c1 type disk format 'd:\copy\%f';
  BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'full_backup' DATABASE ;
  }
  

  It creates the backup under D. COPY directory, but the name of the backup copy is the data file file number. How can I take backup that has the same name as a data file that is users01.dbf real?

  Thank you

  SAQ

  Hello

  Thanks, but unfortunately it can not work. By specifying a file name unique 'users01.dbf' for the full database backup will ask other files copy to replace users01.dbf and command would fail. I got the solultion that is as follows.

  BACKUP AS COPY INCREMENTAL LEVEL 0 FORMAT 'd:\copy\SYSTEM01.DBF' TAG='DF_COPY' datafile 1;
  BACKUP AS COPY INCREMENTAL LEVEL 0 FORMAT 'd:\copy\SYSAUX01.DBF' TAG='DF_COPY' datafile 2;
  BACKUP AS COPY INCREMENTAL LEVEL 0 FORMAT 'd:\copy\UNDOTBS01.DBF' TAG='DF_COPY' datafile 3;
  BACKUP AS COPY INCREMENTAL LEVEL 0 FORMAT 'd:\copy\USERS01.DBF' TAG='DF_COPY' datafile 4;
  BACKUP AS COPY INCREMENTAL LEVEL 0 FORMAT 'd:\copy\FLOW_1046227278781593.DBF' TAG='DF_COPY' datafile 5;
  

  SAQ

• backup recovery of data to LUN.

  I have two hosts vsphere 4 connect to a SAN Fibre Channel optical switch.
  San, I created 3 LUN.
  LUN 2 are for computers, virtual and the third ONE of backup and recovery.
  How can I use the third LUN for data recovery? I can't add that LUN to the backup.
  Thank you too

  create a VMFS and add a VHD to the device? (http://www.vmware.com/pdf/vdr_10_admin.pdf)

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• How do I restore the rman backup copied location

  Hi all
  I take backup with RMAN D:\backup location so I copy this backup on new location f:\backup.then how to restore the backup to the new location.
  Please send the /script command.
  
  
  Concerning
  Sachin Agarwal
  Mob: 9871978246

  Mr.Sachine, I will remove, correct answer in a min otherwise, as I said before,.

  Concerning
  HAMEEd