LUN iSCSI with 4096 bytes logical block cannot be formatted

Similar Questions

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• The Windows 7 Explorer reads 4096 bytes of files with FILE_ATTRIBUTE_OFFLINE

  Hi all!

  After installation: Windows 7 as an SMB client. Plan sharing SMB like, say, Z: and use the Windows 7 Explorer to browse a directory in the share. It looks like Windows Explorer bed the first each file 4096 bytes, even files that have the FILE_ATTRIBUTE_OFFLINE set (these files have the attribute set "O").

  My understanding of FILE_ATTRIBUTE_OFFLINE is that the file is not available immediately, for example, because it is stored in a hierarchical storage management system and read on this file may result in access to, say, bands. Of course, you don't want to trigger several tape media, just because you browse a directory.

  So my question is: is it considered "working as intended" that Windows 7 Explorer reads the first 4096 bytes of each file (especially those who have defined FILE_ATTRIBUTE_OFFLINE) when I browse a directory (at least if I browse it for the first time) or should Explorer honor FILE_ATTRIBUTE_OFFLINE and not read these files?

  If Explorer works as expected, is there a way to change this behavior?

  Best regards, Dirk

  Hello

  Please contact the Microsoft Community.

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  We know if that helps.

• HARD drive external - 4096 bytes of the sector support size / change

  We have a number of external hard drives Toshiba, which are almost redundant.
  The sector size, 4096 bytes, is not supported by Windows 2008 Server R2, Windows 7 or less.
  Only in 2012 Server and Windows 8.

  When I say not taken in charge, I want to say not supported for backup.
  The item "System State" backup will not work with this type of disc is connected to the system.

  My question is this:

  Is there a way to get around this?

  Western Digital provides a tool to format drives with a sector size different Windows 7 / 2008 R2 recognizes and allows a backup of the system successfully State. The tool is WD Quick Format Tool. Is there an equivalent of Toshiba?

  Thank you

  Well, since Vista (SP2), the size of sector 4 k is OS supported, but initially, Windows XP as well as Vista (SP1) taken in charge only size of 512 byte sector.

  It seems that in the past provided Toshiba a tool called alignment tool from Toshiba to Advanced Format hard drives (HDD) but this isn t available more as mentioned on this page
  http://Toshiba.SEMICON-storage.com/us/product/storage-products/trends-technology/advanced-format.html

• hex code of Split after every 4096 bytes

  Hi, I'm trying so divided my 4096 bytes in the loop for. The size of the data is 117824, but does not print the substring to all my data (it shows only a part of the data), however my substring2 will display the hexadecimal integer code is that I put the offset of 0 to 117823. Why is this happening?

  As expected, the substring will only display data of the current iteration of the loop. Connect the wire to the right border of the loop for to build a table.

  Your code could be simplified like this:

  

  In your current code, the last items (incomplete blocks) are ignored.

• As a router WRT54GS cascading with IP fixed address block

  Hello

  I read several threads on the routers in cascade and the Knowledge Base, but none seems to fix my script with a router with fixed IP address block.

  My current setup is an ADSL circuit with a block of 8 fixed IP addresses. Of them the first xx.xx.xx.137 is assigned to interface the router, the second xx.xx.xx.138 for the router itself WAN xx.xx.xx.139/140/141/142/143 leaving as usable IP addresses. Connected to the ADSL circuit is that a D-Link DSL-G604T router with NAT disabled to allow IP addresses to be assigned to my web servers and ftp. Of course, DHCP is disabled on the LAN interface.

  Unfortunately, the transmitter wireless on this router is defective so I would my Linksys WRT54GS (Firmware v1.50.6) D-Link router cascade so that I can use it (with active DHCP) as a point of access for multiple wireless devices.

  This thought through to logically I've named WAN 54GS with one of the xx.xx.xx.140 to static IP address available, a subnet mask 255.255.255.248 and the door entry xx.xx.xx.138. I left the LAN settings like the beach 192.168.1.xxx and DHCP active. I then connected the interface WAN of the 54GS to one of the LAN connections on the D-Link with a straight ethernet cable.

  I can connect to the admin 54GS via a direct ethernet connection and wireless interface but not to the internet.

  I can ping that is the xx.xx.xx.140 of the interface wan of the 54GS since a laptop computer connected wireless but not the IP address of the gateway of the network xx.xx.xx.138. D-Link router.

  Am I missing some other settings in the router. Especially in the routing section advanced? I guess that the device must be set to a router rather than the bridge, but if there are parameters of dynamic routing?

  Any help would be appreciated

  Thanks Brickmonkey,

  Just thought I would update this post. I tried from you suggestions, but to no avail. The frustration I did a hard reset of the router D-Link and set it up again from scratch and... Hey presto it now works.

  I can only think that there may have been some settings left from when the router has been initially implemented for Nat and I had configured port forwarding. In any case it now works OK then thank you very much for your answer.

  Fozzie

• When you send a PDF with Adobe send & Track, it cannot be considered an iPhone

  When you send a PDF with Adobe send & Track, it cannot be considered an iPhone. When customers try to access the pdf file by clicking on the link in the email, they get an empty browser window.

  Noted in the FAQ to send & track a person receaving a pdf link should be able to preview and download the pdf of the computer, tablet or smartphone, but that doesn't seem to be the case.

  Solutions or comments on this?

  Thank you in advance.

  Hi tkr.

  On your iPhone, which is the web browser that you are using?  Is - Safari (web browser by default on iOS)?

  If so, if you try the following steps?

  1. Go to the home screen.
  2. Press settings.
  3. Scroll down to find Safari in the left pane.
  4. Tap on Safari.
  5. Disable "block jump - rises" (i.e. allow pop-ups).
  6. Restart Safari.
  7. Click on the link to open the PDF file.

  Please let us know if it works for you.  Thank you.

• How to: install Windows Server 2008 R2 (64-bit) in ESXi 4.1 - 260247 with controller 'LSI Logic SAS'?

  Hello

  I have a newly installed ESXi 4.1 - 260247 on a Fujitsu - Siemens GROUND RX300 S4 with 2 x Intel Xeon E5420 @ 2.5 GHz with 36 GB of RAM.

  Storage controller is a LSI MegaRAID SAS 1078 6 x 750 GB SATA - drives configured with 3xRAID-1 logical drives. BIOS Version 4.06 Rev 1.04.2519

  Now, I'm trying to install "Microsoft Windows Server 2008 R2 64-bit" in a virtual machine, but fail because the virtual hard disk cannot be found.

  I tried with all Types of SCSI controller, but when running of the "Create Virtual Machine"-magician, he suggests 'LSI Logic SAS'. "." I tried 'LSI Logic parallel' and "VMware Paravirtual" but it did not work. However, I have not tried "Parallel BusLogic", since it clearly says no "recommended for this guest operating system".

  I was unable to find documentation on how and where I can find the "LSI Logic SAS" - pilot to be able to continue the installation. The

  Windows Server 2008 R2 installation is an ISO obtained directly from Microsoft eLicensing.

  I also downloaded the drivers floppy 'pvscsi - Windows2008.flp' and 'vmscsi.flp' from the ESXi server, but the program finds no driver validates the installation of Windows on them.

  I also extracted files "windows.iso' of the ESXi machine, but not drivers there as well.

  So my question is, what model is the "LSI Logic SAS", I guess I can download these LSI directly, I need to know what model?

  Any help appreciated.

  Thank you!

  Kind regards

  Christian

  chrkad,

  I think you have the same problem I had.   Trying to install 2008 R2 and asked for drivers?

  The issue wound up being an ISO corrupt Ms.

  Try to download the ISO using the java-based download manager.  This will tell you if your download is getting disturbed, as mine was.  It will also be the image once completed to ensure you've got the whole thing of checksum.  Just download via HTTP does not.

  I found myself in download the image of the House and burn a DVD and realize that the back of the office,

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• How can I erase an imac with a bad logic board?

  I have an end-08, 24 "iMac with a bad logic board. I have since bought an end - 15, 27 ", 5K and was able to move everything via a Time Machine backup (thank God for that!). I'm getting rid of the 24 "but whatever way I do I first have to wipe it and the logic board bad converts this problem.

  Although I'm not quite sure what the logic board, symptoms and a local Mac store confirmed that it's the highest probability. It will start and sometimes there and the past, the login screen, but the screen is always 'glitch', vertical lines appear and it freezes before it gets never entirely recorded in. Is that what I can do to wipe disk data without disassembling the whole and the withdrawal / degaussing HD?

  Open to ideas/suggestions...

  Carl

  Use the target disk Mode. Connect the Mac with a firewire port, love at first sight or a cable Ethernet follow the steps here, except that you use the disc mode target to make the hard drive on your act of target as a connected drive. Then use disk to erase utility.

  Share files between two computers with target - Apple Support disk mode

• I have 14 cookies with 0 bytes that settle 12-30-5000, how do I get rid of them?

  I have 14 cookies with 0 bytes that settle 12-30-5000, how do I get rid of them?

  In Windows, usually if you can find and see a file then right click with a mouse offers options including rename this file. Rename cookies.sqlite to something like cookies.sqlite. Old1 updates the file out of use; while leaving open the possibility to rename it and re-use it if necessary.

  The easiest way to find the file, (it is located in your Firefox profile) is to use:

  • Firefox Button-> help-> troubleshooting-> [folder opened] profile information

  Firefox will rebuild a file the correct name of the next time you restart Firefox. Delete or rename the files deletes cookies and that you continue to use the cookies of Firefox will be added and updated as usual.

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• How can I get rid of a redirect virus. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  I'm on MacBook Pro (retina, 15 inch, mid-2015) how can I get rid of a redirect virus. I use Google Chrome. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  http://Syndication.ExoClick.com/splash.php?IDZone=1758202&type=8

  It's the kind of redirects that I get all the time

• What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• I just deleted xp security 2011 (rogue malware) with Malware bytes, I can't locate my files!

  OK so here's the deal, I removed XP security 2011 rogue infamous malware with malware bytes and before I removed it I couldn't see any of my files o programs she even removed all my desktop icons and after that I removed the malware from that still can't find my files the content my C: is all gone! his Blanck I want to really access my files and folders please help... Sincerely of Dillon.

  Check if your files and folders have been set to hidden, there is a new charge that does this.

  Try to run combofix, it is likely to have a fix for this built in.

  Note that combofix is free, ignore all sites that require payment and go to bleepingcomputer.com.