LV 2001 SP1 using with PSC-2110

Similar Questions

• printers HP psc 2110 all-in-one

  Past from windows xp to 7. My printer will not scan. Message "no scan option. You need to install or run HP software for the feature.

  Hello Randi1947,

  Welcome to the HP Forums!

  I understand that you are unable to scan a document using the PSC 2110. Unfortunately, with the operating system that you currently have, does not contain a complete software functionality. You can only perform a Windows Update on your Windows 7 computer. This information is declared here.

  In this document from HP, it states that certain functions are perhaps not available. Given that your scanning capabilities do not work, there are solutions that you can try. Click the HP document, and then click on 'how to scan, fax, print or use a memory card.

  If you have any other questions, please let me know.

• Cannot get rid of 3 failure windows 'windows install' who quit with 96 percent finished, my printer hp psc 2110 is already installed and functional.

  Computer hp pavilion ze4900 laptop use with the Windows XP operating system and a range of printers hp psc 2110, both were Setup at the same time.

  Recently, whenever I turn on the computer, these windows are: firstly, they say '2100 Tour', then a '2100 Help Installer", then a"21-22-Trb '... "Please wait while Windows gathers information & configure 2100", then a line goes up to 96% completion and stops, after which nothing moves... as freezes.  I click next to them and they leave, but it happens every time I start.  Anyone has any ideas... Thank you!

  Hi Elizabeth,.

  This happens on reboot all? Check if the installation CD / DVD is in the drive. Otherwise you will have to click on Start-> settings-> Control Panel-> Add/Remove Programs-> your printer and click on repair.

  I hope this helps.

• W7-64 bit - problem with printing on HP PSC 2110. It is not possible to find a driver.

  I just got a new computer with W7-64 bit operating system. I have connected my "HP PSC 2110 - all-in one print" through the USB cable, but I was not able to print documents.

  (a) when I try to print a document asking a boks popup on "add a printer".

  Then I go to the area 'Units and printers' to add the printer "HP PSC 2110'. The printer is displayed with an icon (if fare, fine)- but there is a yellow triangle with a '! ' which indicates something is wrong with the printer.

  In the status line: "Troubleshooting must take place" (freely translated from Danish) - I run the process, that identify that there is no driver installed for "HP PSC 2110" problem.

  Problems suggest to fix this - after a troubleshooting process says the problem: "There no driver for the series of Hewlett - Packard PSC 2100" is not resolved.

  What can I do next - any suggestions?

  (b) otherwise, I also tried to follow the process described on HP's own page:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4062&product=79488&sw_lang=#N248

  But I can't get it to work.

  ---

  I hope that there is someone who can help out me.

  Is there a driver for PSC 2110 provided by HP, which provides printing and basic scanning capabilities.  It is distributed through Windows Update and usually installed as shown in the previous links. There are some measures that can be out of order in the page of HP describing how to apply the driver - to succeed, he must have Windows Update turned on before connecting the USB cable.  Windows Update turned on, as shown in the section titled "Configure Windows Update to automatically search for updated drivers". Click on the title to expand that section and show directions.

  Alternatively, you can manually check to see the driver as follows: go to the folder, devices and printers, adding a printer, choose a port, such as LPT1: temporarily, following and when the list of printers, click Windows Update in the lower right.  A connection high speed, it will take several minutes to reload the list.  When the list is full again, select HP as the manufacturer (not HP), the driver that you want is the series HP PSC 2100 to the bottom of the list.  If this driver appear correctly cancel the current installation and then reconnect the USB cable and everything should happen automatically.

  If for some reason you can't use Windows Update drivers you can also download the driver site catalog of Microsoft.  It will take that you use Internet Explorer as your browser and you will have to manually find the driver you need that research does not directly limit the results of my architecture.  For your x 64 system you want the file 11.6 Mb from this page.  Download the file and extract it to a temporary directory, and then click Add a printer, disk and point to the driver to add it to the list, and then connect the USB cable.

  BTW, I have your answer as to answer because 1) you didn't yet have an answer and 2) when a message is marked as being people responded with answers are less likely to open, but other users looking for answers will be unmarked.  This would tend to frustrate you and them :-).

• PSC 2110 all-in-one now prints VERY SLOW

  Maybe I just need to bury it, but my psc 2110 started extremely slow printing - 15 minutes for the align cartridges page, 17 minutes for the 'self-assessment report.  So, it has nothing to do with the connection between the printer and the computer (these prints are of the printer itself).  I tried unplugging everything, wait, and plug it in; Remove and reinsert the ink cartridges; align the print cartridges; Download the HP printer utility (who reported "No problems found"); looking for an update (it says I have the latest).  Any ideas?

  If the printer prints a swath, and then pauses for 15 seconds before the next broke then probably the issue is one of the ink cartridges has failed.  If the PSC 2110 is capable of printing mode reserve (with one of the removed cartridges), then you can remove a cartridge, print something, then replace the cartridge, remove the cartridge else and print something.

  Whatever that cauese cartridge the printer to print slowly is the culprit and should be replaced.  If the PSC 2110 does not support the mode of the reserve, then you will have to use trial and error to find out what cartridge is at fault.  I would like to start with the black cartridge.

• Example: Pavilion dv6: printer all-in-one HP PSC 2110

  I, m trying to install the printer all in one HP PSC 2110 on windows 7. Annyone has a compatible driver for this OS.

  Hi @eok001,

  Welcome to the HP Forums!

  I noticed you're wondering if there is a driver available for your printer HP PSC 2110 running on Windows 7. I'm happy to take a look for you!

  A complete printer driver of functionality for one or more versions of Windows is not available for your printer, or from the CD supplied with your printer from the HP website. To use your HP printer with a Windows computer, you must install the driver built-in. To do this, please take a look through this guide, installation of your printer using the built-in Windows driver. Otherwise, I suggest upgrading to a printer of software complete features and drivers available for Windows 7. Here, a list of printers that are compatible with Windows 7.

  I hope this information helps and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP PSC 2110: need HP solution center software for hp psc 2110 running windows 7 32 bit

  Hello

  The HP Solution Center software has disappeared since I move my laptop HP OS from Vista to Windows 7 32 bit.  I use HP Solution Center for the years software to create PDFs of the documents scanned the printer HP PSC 2110 all-in-one.

  Can you give us the link to download Win 7 HP Solution Center software? I searched on the HP support site using the name of the HP PSC 2110 product, he pointed me to the section of the driver; I followed the instructions, but there is no link to download the software.

  The printer is connected via USB and works fine.  That's all just annoying that I can't use the HP Solution Center software (previously Director of HP) to copy documents scanned to my computer.

  Thank you.

  You are welcome.

  You can download it from the following link:

  http://sourceforge.NET/projects/naps2/files/3.0b1/naps2-3.0b1-Setup.exe/download

  This means that as an older model, its functionality is limited, but there are a few available workarouds. It is surely worth a try.

  For a wireless printer you will need another printer indded, there are many factors to consider and recommend any specific printer, you have specific needs? would be for example you use a fax or not, I guess, it should be a color with a scanner printer... Do you use to print photos or more often good for a daily newspaper, printing and scanning capabilities, these factors may affect strongly any possible recommendation for more information you will find useful.

  However, any current HP device with a scanner supports scan PDF scanning in the HP software.

• State of ink level HP psc 2110 all-in-one

  It is an old printer, use the mode of a a 2002 copyright date.   I thought that all the printer, even that of old, would be able to view the status of ink of the different cartridges on my computer screen.  I talked to tech support and they said to download the driver and a printer icon should be displayed in the bottom right of my screen.  This laptop has Windows 7 and all the HP drivers are supposed to be downloaded automatically.  I tried to update the driver from hp.com, but it did not really anyting.  Again there is no icon to the printer at the bottom right of my screen.  Technical support said that when I click the icon I should be able to access a page that shows the levels of ink cartridges.  Anyone have any ideas?

  Thank you for your help.  I'm a novice here.

  Welcome to the hifiguy69 forums!

  I saw your post want to check on your model of PSC 2110 ink levels. With Windows 7, the complete software package is not available, therefore, you will not be able to see your desktop ink levels.

  However, if you print a self-test, this may show the ink levels.

  To print a self-test:

  On the printer, select Setup or Menu until 'Print report' shows, and then select entry.

  I hope that my post helped!

  Have a great Monday

• PSC 2110 All In One: PSC 2110

  My Dell laptop (Windows XP) and PSC 2110 worked great until recently. The printing process stops just after it starts, then some rattling noise, like snapping plastic come from the printer. I have turned off and on again, I uninstalled and reinstalled the printer several times. I tried to use printing HP and doctor Scan that did not help. I tried updating the driver, no luck.

  Any ideas?

  Hi @MattU12,

  Thanks for getting back to me.

  Let's try a different approach and troubleshooting from a software point of view.  Try the following steps:

  Delete temporary files on your PC

  1. Click on Start and then run.

  2. In the text box on the run window, type%temp% , and then click OK. A folder full of files and other folders will appear.

     All the folders and files that you see in this Temp folder are no longer used by Windows XP and can be deleted safely.

  3. To remove files or individual files, hold your Ctrl key while clicking on each item you want to remove. Release the Ctrl key when you are finished.

     To remove these items, press your delete key or choose file , then delete from the menu.

  4. Confirm that you want to delete the files by clicking Yes in the window to confirm deleting multiple files that opens.

  5. If you want instead to remove everything inside the Temp folder, choose Edit and then select all from the menu.

     Note: If you are prompted that there are hidden files in this folder, simply click on OK to dismiss the message. A few hidden files hanging out in the Temp folder probably aren't significant enough to worry about.

  6. Now that all the files and folders are selected, press your delete key, or choose file , then delete from the menu.

  1. Confirm that you want to delete the files by clicking Yes in the window to confirm deleting multiple files that opens.

  2. After all the files have been deleted, you can close the window and empty your trash, permanently remove the files from your PC.

  Tips:

  1. You may receive a message error deleting file or folder , while files are deleted. It simply means that one of the files is used by a program right now. Click OK, close all open applications and repeat the steps above. If you still receive the message, try restarting your PC and repeating the process again.

  Source

  Then, stop and restart the print spooler:

  1. Click the Start button, select run.
  2. In the Run dialog, type "cmd" and click OK.  
  3. In the command prompt, type "net stop spooler" and press the enter key to stop the spooler
  4. Then, type "net start spooler" to restart the spooler.

  If the printing problem persists after that, click on click here to find out how to disable your Windows systems via MSCONFIG Services to determine if there are programs or services interfere with your ability to print.

  I would like to know how it works for you.

  See you soon,.

• HP psc 2110 adjust print options do not open in Windows 7

  Hello

  I have the following printer: HP psc 2110 all-in-one and I work with the Windows 7 operating system.

  I can print, but the 'Print setting Options' dialog box does not, and I can't change my options, always print with the default settings.

  I tried to access the "Print setting Options" dialog box in Microsoft Word, Notepad, paint, etc. and none of these programs open the dialog box.

  I also tried to access the 'Impression of the adjustment Options' dialog box from the control panel > devices and printers and by double clicking on my "hp psc 2100 Series" printer. Then I click on "Adjust Printing Options" and a dialog box with the title "hp psc 2100 Series print properties" opens to 1/2 second and closes automatically.

  Can someone help me?

  Thank you

  HP doesn't provide full features software & drivers for win7 on this printer model, and so you are using the win7 drivers that do not provide the comprehensive options of the software/drivers HP.

  HP provides only Windows XP drivers/software for this model

• HP psc 2110 itself maintains the reset as default printer

  I have a hp psc 2110 all-in-one printer connected to my workstation I use just for scanning.  I have a network as my default laser printer.  I installed the updated drivers for the 2110 a few months ago and have had a problem since.  Whenever I restart my computer, the 2110 stands as the default printer.  I have to go and manually select another default printer when I notice that I never had a print job that I sent to the network printer.  The hp resets the next morning, when I turn on the computer again.

  I see that someone posted a similar problem to the 1/12 with another HP printer, but there is no answer. Any help would be greatly appreciated.

  It's very strange.  Try to uninstall and reinstall the printer.  Something must have been damaged in the installation of the last.  Let me know what happens.

  Pilot and features HP Officejet and PSC full software

  Uninstalling the software product in Windows XP

  Install the software of the product in Windows XP for a USB cable connection

• PSC 2110 white than yellow when copying and scanning

  Anyone have any ideas why my printer PSC 2110 sees white yellow, when the copy and scanning? For example, when a copy of a white paper with black text and color, white background yellow comes out if I choose the color copy. I did a full reset, but it does not solve the problem. Is my only option to buy new. ? =(

  Well, it was unblugged several days (Don't now, how long it should) and a full reset again, just to make sure (don't know if that makes a difference), but now it works normally. White is now white and not yellow. Thank you.

• Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

  When I try to update Windows 2000 by using Windows Update, web site crashes the message

  'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

  Y at - it a fix for this problem?

  This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

  http://support.Microsoft.com/kb/260910

  Bobby

• How to scan a document of several pages in a single pdf file using the psc 2510?

  I have Windows 7, but the downloadable drivers for this OS, I cannot scan to a pdf file.

  Hi shepp066,

  I understand that you have a PSC 2510 used with Windows 7 that you want to use to analyze PDF files.

  Because your printer doesn't have any HP software for the operating system that you use I don't have a way for you to scan in PDF format. You want to look into some 3rd party scanning programs, and you can start by doing some research to CNET downloads because that's where I do a lot of my own research

  Hope this helps, have a nice day!

• HP psc 2110: a pulse mode, nothing works well in this mode for my psc 2110 all-in-one.

  Get this second puosating soundevery, and the printer is frozen.  In the past I have reset in unplugignthe power and then hoding the arrow buttons cancel and right and the pluging in the power sometimes it works.

  Hello @johnny1936,

  Welcome to the Forums of HP Support!

  I understand that the printer HP PSC 2110 all-in-one is frozen and making a frequent pulsing noise. I would like to help you to solve this problem today. Currently, there is probably a problem with your product, power or a Firmware programming problem occurring within your printer. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Check of power:

  Please connect your all-in-one PSC directly into the wall outlet for power. Power strips and surge protectors can cause your printer for lack of power and will not work properly. Once your printer is plugged directly into the wall outlet test your printer to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: Power Reset:

  1. With your printe r WE, please unplug the power cable from the back of your printer
  2. The power cord unplugged for 1 minute
  3. After 1 minute the back power cable plug in
  4. Your printer should start up on its own

  Once the printer lights please test your product in order to confirm that the problem has been resolved. If the problem persists, your product may experience a failure of Firmware. The Firmware is the internal "brain" of your printer. It determines what your printer is and how your printer it. If the firmware is corrupted in your printer, it may cause performance problems. Normally, I would have you update the Firmware on your printer. If the problem persists after the update is complete, will allow us to complete a programming reset the printer. However, due to the age of your printer there is no Firmware updates or resets the programming. Therefore, a replacement product may be necessary if this problem persists.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if you see all the solid or flashing lights or message board on your printers. I look forward to hear from you!