M100-166 problem satellite to turn it on

Similar Questions

• Can satellite M100-166 - I switch to 4 GB of RAM?

  Hello!
  I have a Satellite M100-166 (PSMA1E-01X00TPL) with 2x512MB of RAM (DDR2). I would like to upgrade to 2x2gb, but there is a problem.
  In the manual it says: "256, 512 or 1024Mo memory modules can be installed in two locations of main memory to a maximum of 2048 MB memory system"

  BUT:

  On the product page
  http://CE.computers.Toshiba-Europe.com/innovation/JSP/supportMyProduct.do?LNG=20&service=CE#tab0;
  (hotlink doesn't work, search for Satellite M100-166)

  Kingston Memory Configurator:
  http://www.EC.Kingston.com/Ecom/configurator_new/modelsinfo.asp?ID=1&SysID=29403&MFR=Toshiba&model= Satellite + M100 & search_type = & root = us & LinkBack = http % 3A % 2F % www.kingston.com&Sys=29403-Toshiba-Satellite+M100-166&distributor=0&submit1=Search 2F

  and even the product page for the Intel chipset
  http://www.Intel.com/products/Notebook/chipsets/945PM/945PM-overview.htm

  According to them, that it should support up to 4 GB. Thus, it supports 4 GB or not?

  SSM
  I am aware of the limit of ram / 3GB in 32-bit Windows, and I know that the second location of memory under the keyboard.

  Hello

  I think that there are different configurations of hardware M100.
  This means that different M100 supports different chipsets and that is why you can find various information on the upgrade of RAM.

  For me, it seems that the Satellite M100-166 could be upgraded to 4 GB of RAM.
  The chipset seems to confirm this value, it should be possible to get 4 GB of RAM.

• Satellite A200 - turns off randomly

  My Satellite A200 turns off randomly, I don't know if it is the power supply or 32 file system. I have re-installed Windows Vista 32-bit. and the problem still persists.

  Would that my adapter or power suply?

  Your laptop may turn off due to overheating. Before you start with your problem, did you laptop computer cleaning?

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

• I have a problem when I turn on my computer...

  I have a problem when I turn on my computer. An error that says: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "
  And there are 3 options: start windows in safe mode, safe mode with network or start Windows normally. And... If I have the choice between these options my Windows shows this option again and again after loading... How to solve "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. " Problem ?

  lakimedo,
  The first thing, have you changed any hardware or software?   If you added new hardware then delete and restart.  Also disconnect external devices and try to start.  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• Satellite P30 turn off - also problems with burning DVDs

  Hi Please help me.
  I had a row with my brother and it won't help.

  My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
  I put on the books, not on my knees, keep him away heat, crash back to the desktop.
  It makes me crazy, please, any help or advice or anything like that would be a great help.

  I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
  Also the advice would be great!

  Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

  Hello

  Overheating problems usually occur because the cooling module cannot work properly.
  Fans are unable to work because of the dirt and dust inside the laptop.
  The best way to clear the fans is to use the vacuum cleaner.

  On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
  In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

• Satellite P500 turns off most since re install Windows7

  Hi all

  Toshiba satellite laptop
  series: P
  Model: P500
  Model number: PSPGSE
  Operating system: Windows 7 Home Premium edition

  Following a final crash of the original hard disk, so I changed the drive and performed a complete re-installation of windows7 (an original touch and put my original).
  Subsequently I have re installed the driver via the toshiba site (most importantly, so no software supplied automatically with PC purchase), and that all are present according to device (of interrogation or other point of warning) Manager.
  More through the touslesdriver.com site, I added their scanning software small told the pilot to missing day or not (so basic but all seems normal...)

  Windows of decanting finished and I started to update the drivers, windows out never normally, menu, start, stop, closing the session and after that bogus on "stoppage of work" until the "Blue Shield (about 10 minutes later, a solution or the button works / stop)."
  Single point, drivers arrive to their windows or windows installation to restart, but the problem always comes back.

  Then in normal mode, no messages or any other information that makes me say that there is a problem, but when close windows here is barattes in a vacuum no solution other than the button walk / stop (I also tried ms config: stop all, same effect).

  Now in safe mode gives the change!

  Beginning and end of windows that is no problem!

  Still in safe mode, the device section driver, then display devices, 'plug and play' shocks only information is that an exclamation mark on 'Security processor loader driver' is not visible outside the safe mode.

  No possibility of anything and much too much different information on the net which could help me solve this exclamation point and certainly my problem?

  Hello

  I own P500 too, but I use it with the new HARD drive but with the original recovery image (Win7 64 bit) I've had with her. Why have problems such as you, when I can have perfectly installed OS. That do after the installation of recovery image's own upward and the optimization of the OS. I have delete all things I don't no need and turn off all unnecessary processes that can slow down my system.
  I m really wondering why you do the same and use OS without a few installation issues.

  In any case, after reading your ad I didn t understand what your problem is, but what I can say is follow:
  Satellite P500 is fully supported for Win7 so you do not have some third-party software of the part for the detection of drivers and similar useless diagnosis. All the necessary drivers, tools and utilities, you can find and download from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  On this virtual path, I can't tell what your problem and how to fix it. I know, it's that the whole available drivers on the Toshiba download page are tested and are part of the original image recovery.
  I think either you should reinstall the OS using original recovery image and remove all the stuff, you need or reinstall Win7 clean and begins to install the drivers, tols and utilities Toshiba download page only.

  Order of installation:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Value Added Package
  O2 card reader controller
  Audio driver
  Wireless LAN driver
  Synaptics Touch Pad Driver
  TOSHIBA HDD Protection
  Bluetooth Stack for Windows by Toshiba
  LAN driver
  Sleep USB TOSHIBA and service charges
  TOSHIBA face recognition
  TOSHIBA eco Utility
  TOSHIBA HDD/SSD Alert 3
  HDMI Control Manager
  ConfigFree
  TOSHIBA Assist
  TOSHIBA Web Camera Application

  Bye and good luck

• Satellite L750 turns on and turns off by itself using Linux

  Today, I had some strange behavior on my laptop. It closes unexpectedly, after showing a dialog box saying "your computer will stop in 60 seconds". And then when I turn it back on, it stops just before the start and it turns on by itself after a few seconds.

  It not too much heat, the CPU temperature is normally between 50 - 60 c (I constantly monitored using Conky). In addition, someone told me to upgrade the BIOS, so I did it, but the problem persists. I also tried to replace the RAM and run a memcheck, but everything looks good on the side of the memory.

  I use linux and had a look on ' / var/log/syslog ", but I'm not sure that I know exactly what to look for. Messages saved before you stop do not seem to describe something suspicious.

  I use Ubuntu 12.04 LTS, but it seems that the problem is more hardware related and I would like to study what are the causes stop randomly. The same thing on Windows, but there is no warning before stopping.
  My laptop is a Toshiba Satellite L750-11w.

  Clues would be greatly appreciated.

  > I use Ubuntu 12.04 LTS, but it seems that the problem is more hardware related and I would like to study what are the causes stop randomly. The same thing on Windows, but there is no warning before stopping.

  You have verified the functionality of the laptop using the Windows system, but have you used the Toshiba recovery disc and have you tested with factory settings?

  I m wondering about the message: your computer will shut down in 60 seconds

  If this would be a hardware problem, then the laptop would be closed without any warning messages.
  So I guess there must be a software problem, I guess that some triggers for setting this automatic valve downwards.
  But to be honest, I have no idea of what parameters can be

  If you think that its hardware problem, I guess only a laptop computer technician would be able to help you.

• Power button on Satellite A300 turn computer automatically.

  Hello.

  I recently removed the carcass on my Toshiba Satellite A300 and when I put back it together I have a problem with the power being real button delicate in some cases, turn off the PC itself.

  When I start the PC or put in mode "sleep" by pressing the power button sometimes all I have to do is touch the button and the PC turns or sleeping and strangely sometimes the button work normally by pressing it down until it snaps.

  I couldn't find the problem, I was wondering if anyone knew what it might be and how could I solve this problem?

  > I recently removed the carcass on my Toshiba Satellite A300 and when I put back it together I have a problem with the power being real button delicate in some cases, turn off the PC itself.

  It seems you damaged or done something wrong during the disassembly procedure may be a connection problem?
  I guess the power button has worked correctly until you have removed the case and disassembled the laptop. Right?

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too

• Re: Satellite A660 turns off

  Hello

  In June last year, I bought a Toshiba Satellite A660, when I took out of the House and the box, he doesn't work, turn on, and then he clicks.

  I got the next day traded with another sealed unit. While in the store of the computer, I demand to see work before I take it home. Open the box starts, it worked. Last month he began to go off while in the workplace, I linked to an overheating (it heats up a lot on day 1) I bought a laptop cooler, run on USB with 200 mm cooling fan. No difference, it is capricious, some days work all day another time just clicks off and I want to never start.

  Today I'm not if happy because I can not start my work is always on it. What is my solution?

  I am a computer professional and is my diagnosis for this laptop: it runs too hot and the breakdowns are inevitable in the first six to 12 months, depends on its daily use (hours / day).

  In my opinion:

  (A) I don't want to fix it (it is still under warranty) I need a replacement because it is a manufacturing defect.

  (B) If this model has design problems especially overheating then it should be exchanged with a reliable model equivalent.

  see you soon,

  Vania Lolham

  Hi mate

  (A) I don't want to fix it (it is still under warranty) I need a replacement because it is a manufacturing defect.

  I think you need to check with your dealer to laptop.
  To my knowledge the certified partner Toshiba is able to repair and fix the laptop, but you will not get a refund of ASP.
  If the laptop is under warranty, your laptop will be corrected for free.

  (> B) If this model has design problems especially overheating then it should be replaced with equivalent reliable model.

  Don t think that there could be a problem of design one of my friends has a series, and it works properly.
  First of all, you should check if you BIOS update could improve the functionality of the laptop.
  You should also check if the dust and debris does not prevent cooling modules work correctly. In my case, my old laptop didn't work correctly because of the dust.
  I used to delete this jet of compressed air and it worked.

  Finally, I must say that it shouldn't be necessary to use additional cooling pads in order to cool the laptop. If portable s temperature is too high, then it must be something wrong. If above advice doesn't help, then I would say that the material could be affected and in this case, the technician must verify that

  Welcome them

• My Satellite C660 turns on itself

  Several times after putting on sleep, I come back to find that he himself lit! I only noticed this, while it set to never sleep while it's totally shut down/turn off. It's a Satellite C660-1UG (France)

  This is my second Toshiba, my last one also a Satellite had exactly the same problem!

  Check please the BIOS settings and disable options wake-up on LAN or wake up on the keyboard.

• Satellite C650 - turn on questions

  so good for about 8 or 9 months my c650 satellite shows me the start to power up menu. This seems just after the toshiba screen where I can press f2 or f12. without pressing one of these need me directly in the start menu.

  from there, I have 5 options I usually choose 1. HDD/SSD ' it then take me to a black screen with a white dash in the top left corner. The laptop then beeps continuously for about a minute. He then proceeds to loading windows. and lights.

  I have news that was weird but had no problem at the time where it turned. Recently the laptop after that bleeping would take me to the windows screen and freeze I could never get in front of this window. I tried to repair and recovery of windows that these two end up freezing. also enter in safe mode advanced startup options would result in a crash.

  I did a complete reset wiping all. It worked the laptop turns on but still takes me to the boot options and the beeps continuously before start. I'm afraid that the laptop stops become beyond this point again and I have to wipe my laptop once again. If really after my life story im wondering if someone knows about this problem and if there is anything I can do!

  any help will be greatly appreciated...

  Thank you

  > from here, I have 5 options I usually choose 1. HDD/SSD ' it then take me to a black screen with a white dash in the top left corner. T

  This is a typical sign of a malfunction of the HARD drive
  It is possible that the faulty HARD drive is the reason for this portable gel
  Try the new HARD drive and check if it solved the problem

• Satellite P300 - turns on automatically

  Hello

  I have a Satellite P300 with Windows Visa Home Premium as the operating system. When I turn the computer off (through stop) it stops successfully. However, after some time (between 15 min - 2 hours) on the computer automatically without any intervention on my part.

  Counsel on how the issue could be fixed?

  Hi siahrigi,

  Have you plugged the external devices to your laptop as a printer, mouse, LAN cable or something else? If yes unplug all of them and the only cable that must be connected is AC/DC adapter. All other devices, you must delete and then test whether your laptop turns on again.

  In addition, I would go into the BIOS and load the default settings. Also make sure the Wake up on LAN is disabled and save these new settings.

  By the way: since when did you notice this problem?

• Satellite P10 turn suddenly

  Hello

  I have the satellite P10
  Im having problems.
  I reformatted about a month ago, and since then, his performance is even more strange. One morning, I turned on and then as windows was loading, all images on the screen pixeld and started jumping up and down the screen... almost like matrix effect. Windows loaded, but my office etc. still had this majorly pixeld watched and kept jumping.

  I managed to restart the pc in safe mode - and he has not had the same problem since then, however, it shuts down completely I work almost everyday now - or the second day.

  I reformatted... installed lastest drivers, constantly updated to windows and have updated graphics cards etc.
  He continues to cut all of a sudden - and feels as if it detects overheating a bit as well.

  SOS. What should I do?

  Katy

  Hello

  Maybe the display problem had occurred because of the corrupted display driver.
  However another question looks like overheating.
  You can try to use the vacuum cleaner to clean the cooling modules.
  It is a simpler procedure to clarify the fans.