Portege R500 and Toshiba optical Tilt-Wheel Mouse

Similar Questions

• Portege R500 and Novatel Modem 3G on Windows 7

  Hello

  someone have a solution for getting the Modem 3 G build-in novatel works on Windows 7 in a Portege R500?

  I tried to install the driver for Vista 32 bit on my W7-Ultimate32bit. I have tried this driver:

  http://de.computers.Toshiba-Europe.com/innovation/Tracker.jsp?file=http%3A%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2F0%2fwmb-20071115155201.zip

  Installation starts fine, but the installer then a fallback and stops.

  What do I have to wait for a W7 driver?

  Klaus

  > Should I wait for a W7 driver?
  I think so. You can try to use the Vista driver but there is no guarantee for correct material work.
  I think that Win7 drivers will be available soon.

• Portege R500 and SSD update

  I have a Portege R500-S5006V with a 64 GB SSD installed.
  Currently I have space issues, but always so happy with this nice computer I don't want to replace it.

  Is it possible to upgrade to an SSD more? What kind of readers are compatible?
  I need to send to Toshiba, or a regular computer repair shop can do this for me?

  I think that the SSD in this machine is not a standard 2.5 "SATA or IDE Drive, it is 1.8" and has a ZIF connector and runs as an IDE device.

  Do a google search for "IDE ZIF SSD" and you will find a few commands which can be compatible. In theory, they should work in the R500, but I'm not 100% sure.

  An FSL can install for you for a fee.

• Portege R500 - Flashcard Toshiba has stopped working

  Hello

  I get this error "Toshiba Flashcard has stopped working and will be closed" when I start my laptop Portege R500.
  What is the cause?

  I'm running Vista and my PC continues to run even if it does.

  See you soon,.
  Elty

  Hello

  It's not easy to say what causes this problem.
  In most cases to other parts of the software may affect the functionality of different applications.
  For example, my flash card stopped working after Vista ran some updates.

  I simply removed the old VAP (value added package) of the system.
  I cleaned the registry and the system using CCleaner (free tool) and reinstalled again the VAP.

  Now everything works fine.

  I think you should try the same too.
  Remove the VAP and installed as the new VAP downloaded from the page of European driver of Toshiba.

  Check it out!

• Portege R500 and Wireless connectivity N

  I just bought a new Portege R500 with wireless capabilities N, through the pre-installed Intel 4965agn wireless adapter.

  The problem is that it does not connect to the router Dlink 2740 b mode only wirelessN. The only way I can connect it is in when the router is in the mode of GBS and it connects to 54 members.
  No idea why the N Wireless does not work?

  Arnaldo

  Perhaps that the wifi router doesn't support the standard 802.11 N wirelesses

  I think you should check your router WLan properties.

• Portege R500 and Windows 7 drivers

  Some drivers W7 happened 03.09.2009 for R500 - but unfortunally the 3G a dWlan are not included. Work does'nt Insallaing Vista drivers (even in Vista mode). Can someone help me?

  Rgds
  Lars

  Hello, Lars

  What do you exactly mean with doesn t work?
  Can you activate/module 3G?
  What exactly is the problem?

• Portege R500 - is not reading DVDS and software of DVD writer?

  We have a few notebooks Portege R500 and put our brand on them image very well.
  I can't find the DVD playback software and the software editor of DVD on the download site, is it available? It comes pre-installed on the computer, but we do not want to use the image it comes with.

  Thank you

  This additional software is only part of the image of Toshiba and can be downloaded from the Toshiba driver page!
  If you want to use the software if you need to buy a version full or you will switch to the image of Toshiba.

• Intermittent Bluetooth on Portege R500

  I have a hardware problem intermittent with the Bluetooth adapter in my two - month, Portege R500 and I would appreciate any comments or second opinions before you attack me it as a warranty issue.

  I use a Bluetooth mouse with my R500 and it was fine for the first five weeks. Then I kept noticing that the mice would be dead for a few seconds at a time. Whenever it happens that the machine does the 'Vista' connect device or its "disconnect device" (a kind of twang). Since yesterday, it has reached the point where there are about ten twang events an hour but the Bluetooth remains ever work for more than a few seconds.

  I found that an easy way to monitor the issue is to disable the external Bluetooth devices (to totally eliminate their effects), leave open device with the Bluetooth expanded element Manager and increase the volume up to hear the "twang" that signals an event of default. Every time that happens refresh the window Dev man and objects reappear or disappear from the entrance of Bluetooth. When everything is ok the following five recommendations are present, but now, for most of the time, there are only RFCOMM.

  a? ¢ RFBNEP Bluetooth
  a? ¢ RFBUS Bluetooth
  a? ¢ Bluetooth RFCOMM
  a? ¢ RFHID Bluetooth
  a? ¢ Bluetooth USB Controller-5 at Toshiba

  When I run the diagnostics of Bluetooth for 'check communication with Bluetooth device' translates 'bankrupt '. The Bluetooth stack was originally v5.10.14 (T). I replaced it with the 6.10.10 new and this has worked, but intermittency is unchanged, so this seems to rule out software problems. Anything I do, as to move the machine or restart, seems to affect when an "event" occurs; don't change when the machine heats or cools.

  In any case it is now obtained in the step where Bluetooth is not usable more so it seems I have to deal with the guaranteed repair procedure.

  You're right about this Johnson. If they see that you have removed the screws on your own it can void the warranty. Be careful with this. You have very expensive laptop and warranty should be valid or maybe you should expand it buy an extended warranty.

  In any case, good luck!

• No sound on Portege R500

  Hello

  I have a Toshiba Portege R500, and there is no sound.
  In the Device Manager I checked the drivers and hardware and it seems to be ok.
  I did test sound with the sound of Windows and it did not work.
  I have good gear wheel in the front of the laptop, no sound.
  I use Windows Vista Business SP1.
  Can you help me? Should I use a specific software from Toshiba?

  Kind regards

  OK, you already checked wheel in front of your laptop. Make sure it is not disabled via the FN + ESC key combination.

  The other thing could be, she is silent in sound options or level is set to low.
  Got to control panel configuration-sounds.

  There should be a green mark on the speaker icon. Enter the properties and go to the level and put them to 100. Check that there are no red symbol above the speaker symbol.

• Replacing the screen on Portege R500

  Hello

  I have a Portege R500 and I managed to break the screen.
  Part number is LTD121EWEK. Do I need to replace it with the same or are they some compatible screens which will be adapted?

  Thank you
  Wooju

  It is always best to use the same parts. So you'll be sure that everything will be OK.
  Question on other compatible screens is interesting, but I don't think anyone here can give a definitive answer or.

  Contact the nearest service Toshiba and ask for help. They have access to the database of Toshiba and they can check which screens can be used on this portable Portege model.

  By the way: I found the same info that you can use LCD TDG (LTD121EWEK) on the internet.

• Portege R500 stronger cooling module

  I have a Portege R500 and Notepad air fan is stronger.
  I tried several cooling profiles (battery optimized Performance, battery, optimized cooling performance) and with all profiles is the fan of the air harder. :(

  Hello

  I think that there is anything wrong with your laptop or cooling modules.
  The cooling module could be little bit stronger due to the fast rotation of fan.

  But the fan must turn more quickly to ensure a good and cooling properly.
  This is necessary and essential to ensure that your internal parts like CPU and GPU overheats not!

  PS: Have you checked settings dynamic CPU frequency mode in Toshiba HWSetup?
  Please check if the frequency was set to dynamically switchable.

  I know that you have changed the settings of day before but let repeat me once again.
  Saving PCI-> enable
  Method of controlling CPU-> auto
  Processing speed of the CPU-> set it to a lower level (left)
  Method of cooling-> lower level (left)

• Portege R500 - Nokia PC suite does not work with Bluetooth

  Hello

  Toshiba bluetooth + nokia pc suite works DO NOT!

  I have problem with Portege R500. Toshiba Bluetooth stack 6.40 (from the download page) is not compatible with the new Nokia PC suite 7.1.
  PC Suite only works with Toshiba Bluetooth stack, driver version 5.10.12. PC Suite indicates that bluetooth can not be found.

  * See the system requirements for PC suite

  http://Europe.Nokia.com/get-support-and-software/download-software/Nokia-Ovi-Suite/system-requirements

  Where can this 5.10.12 version be downloaded for 64-bit operating system? I just need for the trial which would even work.

  Help, please!

  Hello

  I'm not very well if you want to get an older version of battery BT m.
  On this Toshiba Bluetooth portal, you can get the new version 6.40.00 BT
  http://APS2.toshiba-tro.de/Bluetooth/

  But I don t understand why it should not work with c. 6.40
  I think that Nokia system requirements were created before the release of version 6.40...

  However, if newest PC suite 7.1 is not compatible with the BT 6.4 then I recommend that you test the battery Microsoft Bluetooth...

• Portege R500 - unrecognized SD cards

  Hello!
  I have the R500 with WinXP SP3 and player SD slot does not properly small or large SD cards. Device Manager displays a certain activity when a card is inserted, but the resource (My Computer) Manager shows not all SD cards / new readers. Any ideas how to solve this problem? The device uses drivers WinXP or Toshiba? Texas Instruments or any other driver of manufacturers?

  Thanks in advance!

  Hi muza57,

  What types of SD cards are you using exactly?

  I checked the user manual of the Portege R500 and it supports the SHDC cards up to 8 GB SD cards up to 2 GB.

  I recommend also to install the last driver on the Toshiba site.

• Re: Portege R500 - FN keys no longer works

  Hello

  I have a laptop Portege R500, and suddenly the fn keys stopped working. I looked for off site Web from Toshiba, but no pilots have had no luck and also tried reinstalling the common Modules (I just re-installed, it is necessary to uninstall anything before hand?).

  I use the OS is XP SP2. I tried a system restore and don't really want to do a full system restore.

  Basically, I just want to get them working again.

  Any help would be appreciated and thanks in advance.

  Matt

  Hello

  The common Modules should be resettled in too, but it would also be necessary to reinstall the Hotkey utilities for display devices.

  By the way; You must clean the registry using the free program called CCleaner.
  You can download many Web sites. Google simply

  After use of this applications reinstall the common Modules and the Hotkey utilities for display devices.

  Good bye

• Error installing software Portege R500 to fingerprints under XP

  Hello, I install XP on Portege R500 and all the drivers from the Toshiba site. After installing the software of fingerprint AuthenTec worm: 1.1.11.8 and restart error of: fingerprint identification system TrueSuite Access Manager:

  EventType: BEX P1: P2 FPManager.exe: 1.1.11.8 P3: 471317a 0
  P4: FPSuites.dll P5: 2.2.13.19 P6: 4733c92a P7: 00003628
  P8: c0000409 P9: 00000000

  Do not send

  I'm trying to install the driver without software but it's impossible.

  Thanks in advance.

  Hello

  Have you installed the following things all enforcement facilities contained in the Instructions of facilities?