M1212nf MFP: Scanning on a M1212nf MFP

Similar Questions

• M1212nf MFP - scanning is extremely slow

  I recently bought machine M1212nf MFP. Everything works well except the scan. No matter if I scan "with" or "without" HP scanning software is extremely slow. With setting the quality to 300 dpi in color, it is fine enough, it takes several tens of seconds to get the image to my PC. With 600 dpi setting, it takes several minutes and sometimes it does not and I have to turn the printer power off and power on. With up to 1200 dpi setting, it takes up to 30 minutes to scan the image and in most cases it ends any without indicating any error - it freezes just and the printer indicates that the communication is in progress.

  Is this a normal behvaior of M1212nf MFP? This means that I can't use higher image qualities? I checked the wiring configuration and network tha and everything seems ok. I have the printer connected to the wifi ASUS router so I use the LAN to print and scan. Any other data transfer go well on the network, so I guess that the network is not the problem.

  I bought this 'multifunctional' machine to replace my old printer and scanner with a single device. But so far, the scanner is unsuable for me because of its extremely low performance .

  Any ideas? Any tips? Thanks in advance for any help.

  What operating system do you use?

  What firewall and antivirus do you use?

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Scanning with a M1212nf MFP

  Is there a driver available for my m1212nf mfp separate scanning? I have just connected to Windows 8, and it will not scan? I had XP before and think that I had to download a separate driver? Best Buy told me to uninstall and load your set of drivers for windows 8 on your part, I did this and still no. SCANNING Argggg - please help, thank you CWL

  I'm sorry you have a problem with the scanning. You get an error message when you try to scan?

  Run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03275041

• New Laserjet M1212nf MFP does not copy or scan. Not taking in the documents document feeder

  Product: Laserjet M1212nf MFP

  OS: Windows Vista 32-bit, Windows 7 64 bit

  USB 2.0 connection

  Scan software Readiris Pro

  Have installed a new Laserjet M1212nf MFP. When I send a document to print, it produces an impression outside, well wrapped on the ends because of the heat.

  The copy function and the scanner or never do not produce print outs. The bar with light moves on the copy/scan with the light area, but no print out.

  In addition, for the copier/scanner document feeder does not pages.

  I installed several LaserJet using a number of operating systems in the past.

  Best wishes

  Shanefg

  Hi Shane,

  Thank you for the additional information. You experience a hardware problem with the scanner in the printer mechanism. The following additional options depending on your current status of the warranty on this printer.

  In the guarantee:

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Out-of-warranty options:

  http://support.HP.com/us-en/document/c02652026

• Scanning on a Laserjet M1212NF MFP

  I spent a good hour 1/2 of trying to figure out to scan on this machine without a bit of luck.

  The answer is probably right in front of me, but I just can't figure out how to start a scan.

  Help...

  Try to locate and launche the "scan to":

  menu--> programs--> HP--> HP LaserJet Professional M1210 MFP Series--> Scan-to-of start.

  If you still can't find it, you can not installed full driver function containing the scanning application & driver.  go to HP.com and download the latest SW package for installation.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-80811-5&CC=us&DLC=en&LC=en&OS=4062&product=3965849&sw_lang=

• LaserJet m1212nf MFP not recognized by OSX 10.6.6 for scanning

  
  

  There are several ways to support a scanner on Mac OS X.

  One is to provide all of your own software, which is what we usually have in the past and did with the printer in question. You can also provide an ICA driver that allows him to work with the Image Capture, preview and other Mac OS X software. We have recently begun to provide these drivers, but not for the M1212nf at this time.

  Support of ICA will certainly to be considered for all future devices that release us, but so far there are a lot of devices that do not have this support.  The m1212nf model mentioned in this thread is not on our current list of ICA devices supported.

• Scanning with the M1212nf MFP

  Hello. I have the above printer all in one, which has an option of analysis that I have never used it before. The printer is connected to a desktop running Windows 7 with a USB key, not of wireless. I do not have the manual, so any help would be appreciated. Thank you.

  Hello

  You can either scan through the HP software or through your operating system software.

  To analyze on a Windows 7 PC, follow the steps below:

  http://support.HP.com/us-en/document/c03584750

  Shlomi

• LaserJet M1212nf MFP: laserjet MFP won't allow scans to save in pdf format

  scanner does not provide an option to save as .pdf scans

  You analyze with the help of scanning worms or any other application?

  Try scanning by Windwos scan below, it provides PDF scan capabilities:

  https://www.Microsoft.com/en-us/store/p/Windows-scan/9wzdncrfj3pv

• M1212nf mfp scanning problem

  Scanning problem

  My printer recently started having problems with scanning.  I start a scan.  He is busy for a long time and then fails informing me that HP LaserJet Scan has stopped working.  When I type the guest Cancel Windows, the printer still displays the message "Scan to PC" forever.

  I tried everything, including the scanning print doctor PC, which fails also in the same way, reloading drivers, firmware etc.  Sometimes I get a message "unable to communicate with the printer.

  I can print and photocopy.  It is connected via USB.  No hardware problem does appear in Windows.

  Help?

  Hello

  A defective cable can affect much more than the impression, as scannign consumes much more energy to make the connection by comparing standard analysis printing.

  However, what happens when you try to scan from Windows Fax and Scan?

  I strongly suggest such a you already reinstalled the software and a bit checked any possibility that the relocation of the software already.

  Please let me know the results,

  Shlomi

• LaserJet M1212nf MFP: Scanning does not... Once again.

  You are God * beep * serious? I've lost my patience with this thing. Used to scan via USB, but the part on the printer pulled plug and pulling repeatedly. Then connected by Ethernet cable. Would not scan. It turns out that the printer must be plugged into a wall outlet instead of the power bar. Very well.

  And now, it does not analyse new, but this time I literally haven't touched it since the last time once I plugged it in the wall. The device is in offline mode on my computer but can still print documents, but it won't scan. I checked the power cord of the printer and it is not loose at each end. All my drivers must be current.

  Well, this should allow you to analyze:

  1. If the printer is connected via USB cable to your PC, delete.
  2. Click on start and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. Download and install the latest drivers by clicking on this link.

  Please let me know the results after doing the above.

• LaserJet M1212nf MFP: Spring / roll jumped out of scanner flat.

  I had a paper jam while I was scanning several sheets in the feeder.  I opened the lid of the scanner and a spring / roll came out.  I am still able to print and scan from the tray, but I'm not able to use the charger.  I have attached a photo of the piece that jumped.  Anyone know where it's going?  Thanks in advance.

  

  Hi @deejaygreg,

  Welcome to the HP Forums!

  I see that a roll of spring/jump our of your HP Laserjet M1212nf MFP printer. I'm happy to help you!

  The only suggestion I have for you is to please contact HPtelephone support for further assistance. To repair the printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• Help! LaserJet M1212nf MFP

  Hey.

  I have HP LaserJet M1212nf MFP AllInOne baought ricently.

  when im trying to scan, if its with the charger or glass, is comeout as Mirrowview page scanned.

  when im asking him to pruduce as a MirrorView is just won't come out.

  I have updated and softwere of hp.

  im a 32-bit Windows 7 user.

  you have a solotion for this problem?

  Hello

  It is a software problem known with the alignment from right to the left of the preview of the scan, it only affects the preview screen , but the analysis results will be as expected.

  Once the mirror preview appears. do not duplicate the preview but complement the analytical work... the results of the analysis will be as expected.

  To completely resolve the problem, you can uninstall the HP software, change your PC Non-Unicode affecting English and reinstall the HP software. Then the HP software will appear as English and not to see him get an overview of the analysis as a mirror image.

  Shlomi

• LaseJet M1212nf MFP "" name of the failed module: HPM1210GC. "» DLL.

  I have installed HP Laserjet M1212nf MFP on 3 differnet PC (win8/win7) and when I try to print the spooler service stops

  with erro "" name of the failed module: HPM1210GC. "» DLL.

  I did a check on the forum and found out that I have to use universal drivers.

  I can not find them. I can hardly even find HP drivers from the HP site.

  Any ideas where I can find the universal drivers?

  Thanks in advance

  Hi Dyktio,

  Looks like you may have a problem with the spooler service for printing on the operating system of the pc. HP has developed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity:

  HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  http://www.HP.com/go/tools

  I would like to know what are the errors you receive?

• HP LaserJet M1212nf MFP: Printer continually initialization. Prints, but don't copy.

  Why my printer HP LaserJet M1212nf MFP (personal information) print but not copy and continually to initialize?

  Hello @PSFforever,