M1212nf

Similar Questions

• LaserJet M1212nf MFP: Spring / roll jumped out of scanner flat.

  I had a paper jam while I was scanning several sheets in the feeder.  I opened the lid of the scanner and a spring / roll came out.  I am still able to print and scan from the tray, but I'm not able to use the charger.  I have attached a photo of the piece that jumped.  Anyone know where it's going?  Thanks in advance.

  

  Hi @deejaygreg,

  Welcome to the HP Forums!

  I see that a roll of spring/jump our of your HP Laserjet M1212nf MFP printer. I'm happy to help you!

  The only suggestion I have for you is to please contact HPtelephone support for further assistance. To repair the printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• M1212nf MFP: M1212nf MFP cannot connect to the scanner

  When you try to scan a document using the scanner in the HP folder or readIris or paper port 14, I get a could not connect to the message scanner.

  Have tried on/off switch, unplug everything and updatingthe drivers and firmware from the HP site and still nothing.

  Configuration on PC does not bud in a long time and the scanner was working a few weeks ago, but now I get the error message.

  HP support is virtually non-existent, and their software diagnostice did nothing either.

  Also.   I noticed on the LCD Panel there are 3 lights left... Triangle of green yellow continuous top on), with exclamation mark in the middle (at large) and an orange blickinglight next to what looks like a box with a bunch of circles inside (flashing continuously). (I can't find what this icon/light. I suspect he might tell me to clue somehting which is related to the problem, but not what it means.

  Can anyone help me please with this problem.

  Thanks in advance.

  Garry

  Hi @Big-Gee,.

  Welcome to the HP Forums!

  I understand that you can not scan with your printer HP Laserjet M1212nf on Windows 7, and you see the flashing lights on the printer. I'm happy to consider these questions for you!

  To check the printer hardware is functional, are you able to make copies using the printer scanner glass? Overview of the copy.

  In the meantime, please see page 196 in your printer, User Guideand follow the steps.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• Problem HP Laserjet M1212nf Professional USB

  Hi, please help, I bought this HP Laserjet M1212nf Professional about 7 months, I rarely use it. It worked fine before today. Recently my computer laptop windows 7 does not yet recognize. He repeated on the "peripheral USB malfunctioned". I've uninstalled and reinstalled the software, I also connected with the laptop from a friend and I used another cable, still no response, no connection. What I can do. help with goodness, its urgency. Thank you
  

  Hi kluzi,.

  Yes, your printer has a warranty of 1 year on it no matter if you registered or not. Call the number below to speak with a customer support representative.

  Nigeria
  (01) 271 2320.

• Macbook pro to a jet m1212nf laser printer scan

  Hello

  I'm trying to scan from a LaserJet M1212nf MFP to a MacBook Pro running Mountain Lion.

  I installed the latest LaserJet driver from the HP website. Can I print using a USB connection. However I can not scan. If I open the HP Director, by clicking on the button Scan does nothing. If I open HP Scan I get a message: "no scanner available."

  I'm lost. Please can you help me?

  Thank you very much.

  I would recommend that download us the driver via Apple Software Update.

  Before we do that, we want to uninstall all incompatible software, you may have installed on your computer by running the uninstall HP program located under Applications > HP or Hewlett-Packard folder.

  After you do this, we want to download the drivers. The drivers for your product are available via Apple Software Update.

  First and foremost, temporarily disconnect the cable USB from the printer to the printer or the computer. Then look for any HP Update available by clicking the Apple icon, updated software.

  If no update could not be found, download the complete Apple HP printer drivers v.2.14:

  Printer HP v.2.14 for OS X drivers

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg

  Once you have completed the installation, you can plug your printer back in. After that the printer is reconnected, go into the settings to print under system preferences > print & scanning. To add the printer, click on the plus sign. You should see your printer listed here. Select it. If under the printer, see "use:  Make sure that tells the name of the printer and not AirPrint. Click on add down in the lower right.

  Good luck

  Kyle

• All M1212nf in a Doc feeder Fax upwards or downwards? Seems there is no answer insurance online? one

  When google suggest you address this issue to the top or the bottom is facing it is to be face down, but when you look at the online HP, he said face place even with the bent corner that suggests it is to be face down, but they also say that it depends on the manufacturer. SO if you have a M1212nf All in One HP which is the correct way for this FAX Machine use?

  Newaygo1

  Hi Newaygo1,

  The document should face upward on the document feeder, you will find listed by the user guide:

  Fax from the document feeder
  1. Insert the originals into the document feeder face-up. NOTE: The document feeder capacity is up to 35 sheets of 75 g/m2 or 20 lb media.(http://h10032.www1.hp.com/ctg/Manual/c01760651.pdf)
  

  Kind regards

  Shlomi

• LaserJet M1212nf: Driver LaserJet M1212nf

  I have to re - install my HP Laserjet M1213nf printer, but HP no longer supports this printer.  Where can I get a driver for this printer?  HP supports the LasetJet Pro M1212nf and I installed this driver, but it will not be printed.  When I try to print, it puts the impression in the queue, but I can't print.  If (by chance) I hit something that makes sense, it seems good.

  Ron71 wrote:

  I have to re - install my HP Laserjet M1213nf printer, but HP no longer supports this printer.  Where can I get a driver for this printer?  ....

  Hello

  HP supports this printer up to 10 Windows now. Please use the following link:

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-M1200-multifunction-printer-series/3965847/model/3965848

  Or direct download for Windows 7:

  http://ftp.HP.com/pub/softlib/software12/COL32629/im-80811-7/LJM1130_M1210_MFP_Full_Solution.exe

  Kind regards.

• Set up a dial for Laserjet M1212nf group fax?

  I installed my all-in-one to a deskjet 4500 to the Laserjet M1212nf.

  On my old printer/fax, I could set up a speed dial to send the same fax to several fax numbers in the phone book with speed control knob just a dial.

  For the life of me I can't figure out how to set up a speed dial to a fax from the Group on this machine! It makes me NUTS. Is there a separator, you can use to enter multiple numbers or?

  I would be really disappointed if a feature I had on my cheap HP $69 ink jet is not available on this printer laserjet much nicer and more expensive.

  Here is a link that will guide you in this direction.
  http://goo.GL/7Cu4U

  At the bottom of the page, it shows the fax configuration and leads to installation speed dial.

• HP LaserJet M1212nf MFP: Printer continually initialization. Prints, but don't copy.

  Why my printer HP LaserJet M1212nf MFP (personal information) print but not copy and continually to initialize?

  Hello @PSFforever,

• HP Laserjet M1212nf MFP professional

  I have a HP Professional laserjet M1212nf MFP. my computer is connected to the network and my printer eprint as well. I am trying to open my eprint printer Hp web services but it does not open, but it is re - lead me www.hpeprintcenter.com.

  Please how can I activate my eprint printer HP web services?

  Thank you

  I await your response.

  Hi philip24,

  Welcome to the Forums of HP's Support.  I understand that you get redirected to HP ePrintCenter trying to enable web services for your Laserjet M1212nf printer.

  Your post leads me to believe that your printer needs a firmware update, so I've included the document Getting the latest Firmware and updates to the product .

  Once the printer firmware is up-to-date, you should be able to get operational web services. If this isn't the case, please let me know at what stage things are ugly and the content of any error message.  Also would you please let me know which operating system you use on your computer (whatsmyos.com)?  Thank you.

• New HP LaserJet Professional M1212nf MFP is does not print on network

  We have a new HP LaserJet Professional M1212nf MFP. I attributed to a static IP address, and he pulls up on its web interface. I loaded the printer for network printing on our Small Business Server 2003 and installed on several PC. No matter what we do, it will not accept a print job, even the test page. Nothing that he prints. I checked spools of printing, drivers, etc. Nothing seems out of place. Any suggestions?

  I could never operate via the server print but is gone to every computer with the CD and installed via IP right and works fine now.

• LaserJet M1212nf: Laserjet M1212nf

  I just bought a new ink cartridge and installed. Now the priter beeps and says "Install black cartridge" I made sure that I had pulled the tab. Any other ideas?

  Hello @gknutson,

  Welcome to the Forums of HP Support!

  I would like to help you today with the resolution of the problem of detection of toner you encounter on your HP LaserJet Pro M1212nf MFP since installing a new cartridge. Please include in your message that you have made sure the toner tab has been removed successfully from your cartridge. Can I please you follow the steps below.

  To begin, please can I you click here. Once the support document opens, please perform the steps under way to ensure that there is no paper or debris in the compartment of the cartridge that can block the sensors of toner.

  Once the troubleshooting is complete, if the error persists, please make sure that you test your product with a genuine HP cartridge. The last step would be to try a new cartridge into the printer as the cartridge that you have just purchased is maybe defective.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Lazerjet M1212nf: Lazerjet M1212nf cp, [atobo; to wotj Womdpws 10]

  HP has updated Lazerjet M1212nf all-in-one pirinter that is compatiable with Windows 10?

  Hello @cochlearboyand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking into pilots. I would like to help!

  Currently, there are drivers for Windows 10 who I am going to link below:

  Driver and software of HP LaserJet Full Feature

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Ink cartridge Laserjet M1212nf MFP and I get error message "install black cartridge.

  I have installed and reinstalled the ink cartridge black for my Laserjet M1212nf MFP and I get error message "install the black print cartridge.  I pointed out quite in the restart including manual online, the fact to unplug printer, etc..

  Help, please.

  This error of "Install black cartridge" is usually caused by a piece of packaging material that remains on the cartridge. The document below should help you to solve the problem. If this does not work, try to do a hard reset. If neither works, let me know.

  Toner blinking or 'Install black print cartridge' Message is displayed on the control panel:
  http://goo.GL/Nlqpg

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• LaserJet m1212nf network - how to get the printer in a network?

  I have a LaserJet Pro M1212nf, who does not have wireless capability.  I'm on a desktop PC, Windows 7 and am connected with a USB cable from the computer to the printer. There is no other Windows 7 computers on this network, so so far I didn't have need of this feature.

  I spent an hour trying to figure out how to be able to print from my iPad with Airprint, that comes with this printer.

  The printer is shared, which I thought was enough, but apparently not. I found the instructions on the use of a printer wireless, which is not the case, and using an ethernet connection, which I am not, but nothing about the direct USB connection. I found instructions on changing a USB connection to an ethernet connection - this is what I have to do? I hope someone can help with this.

  Should I switch from USB to ethernet to be seen on the computer network and iPad? There must be a way to do this, but I am confused.

  Thank you.

  You should be able to install the printer with the normal software via an Ethernet connection to your router.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3965849

  Install and let me know the result!

  Have a great day!

  -Spencer

  PS this software should include the installation via the USB port option and then convert to USB wireless > Wireless Setup Wizard.