M40 - battery after 1.5 hours

Similar Questions

• Z10 blackBerry dead after only 5 hours battery

  I don't want happened to my Z10, but after only 5 hours and no use a fully charged battery is dead. I bought a new battery but no change. I wish there was an option to completely reinstall the operating system. I have installed all apps

  Always start with a battery pull when something goes wrong with your phone.  There could be something in the operating system that is not aware and a battery pull will often correct this.  To make a correct battery pull, remove the battery while your phone is on, then replace it.

  I hope that helps you.

• 360 13 inches x spectrum: spectrum x 360 8.1 Windows stops to get into sleep after a few hours

  My x 360 spectrum stops to get into sleep after a few hours of normal behavior.  In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period.  It can then be woken up and work normally and then to go back to sleep after inactivity - during a few hours.  It stops working after the computer has been for a few hours.  I don't know exactly how much time must be in place before this problem starts, but once it ceases to be able to sleep, the only way to solve the problem is to reboot the system.  Once the problem occurs, the computer turns off the screen but that's it.  He will sleep if I do it manually by pressing the button of power or a click on the Windows button and forcing them to sleep or hibernation.

  I watched powercfg /requests and there is nothing listed that could prevent sleep.  I ran also report with fluo compact powercfg and it also does not list something that prevents apparent sleep.

  NOTE: The energy report is also EVEN if the system still works correctly.

  I could use help to determine what is the cause of this condition.

  Thank you.  See below for diagnostic information:

  Here is the result of the /requests powercfg command:

  C:\Windows\System32>Powercfg /requests
  DISPLAY:
  None.
  
  SYSTEM:
  None.
  
  AWAYMODE:
  None.
  
  PERFORMANCE:
  None.
  
  PERFBOOST:
  None.

  Here is a release of energy report (Note: site Forum HP changed the HTML code):

  Power efficiency Diagnostics report
  X 360 computer name
  Analysis time 2016-01 - 06 T 15: 16:32Z
  Scan duration 60 seconds
  System manufacturer Hewlett-Packard
  Product system name HP spectrum x 360 Convertible 13
  Date of the BIOS 10/23/2015
  Version of the BIOS F.2D
  Build OS 9600
  PlatformRoleMobile platform
  Plugged In true
  Number of processes 164
  Contexture 1892
  Report GUID {f8670991-ccc2-4c9e-b743-81cb15d13b03}
  Results of the analysis

  Errors

  Suspension device: USB get USB selective suspend
  This device is not in the State of selective suspension of USB. Processor power management can be prevented when the USB device is not in the State of selective suspension. Note that this problem will not prevent the sleep system.
  Name of device Microsoft mouse and driver detection keyboard (USB)
  Host controller ID PCI VEN_8086 & DEV_9CB1
  Host controller location PCI bus 0, device 20, function 0
  Device ID USB\VID_045E & PID_0745
  1 port way

  CPU utilizationrocessor use is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
  Average use (%)     11.12
  Platform power management capabilitiesCI Active Express - State Power Management (ASPM) disabled
  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  Device drivers:
  Devices with missing or misconfigured drivers can increase energy consumption.
  Card device name Cisco Systems VPN for Windows 64-bit
  Device ID ROOT\NET\0000
  State of the device 0 x 1802401
  Code 0 x 16 device problem

  Caveats

  Platform timer resolutionlatform Timer resolution
  Default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the resolution of the timer is increased, processor power management technology may not be effective. The resolution of the timer can be increased due to media playback or graphic animations.
  Current resolution of the clock (100ns units) 10007
  Maximum Timer (100ns units) 156250
  Platform timer resolutionutstanding Timer request
  A program or service has requested a resolution of timer is smaller than the maximum platform timer resolution.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 8464
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.48
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 1360
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,58
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 9788
  Average use (%)     1.08
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name HPSF.exe
  PID 11968
  Average use (%)     0.71
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\System32\win32k.sys 0.10
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll 0.10
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name netsession_win.exe
  PID 5828
  Average use (%)     0.67
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.10
  \Device\HarddiskVolume4\Users\Zeldar\AppData\Local\Akamai\netsession_win.exe 0.04
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 5712
  Average use (%)     0.63
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome.dll 0.35
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.11
  \SystemRoot\system32\ntoskrnl.exe 0.08
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process system
  PID 4
  Average use (%)     0.55
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.05
  \SystemRoot\system32\DRIVERS\dne64x.sys 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process explorer.exe
  PID 3988
  Average use (%)     0.43
  Module Module average use (%)
  \SystemRoot\System32\win32k.sys 0.15
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 7920
  Average use (%)     0.39
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.22
  0.14
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name WWAHost.exe
  4604 PID
  Average use (%)     0.28
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.10
  \SystemRoot\SysWOW64\ntdll.dll 0.03
  \Windows\SysWOW64\jscript9.dll 0.03
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name UoipService.exe
  PID 2544
  Average use (%)     0.25
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\system32\drivers\afd.sys 0.02
  \Device\HarddiskVolume4\Windows\System32\mswsock.dll 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 6600
  Average use (%)     0.24
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,18
  0.04
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.00

  Information

  Platform, resolution: timer Timer application stack
  The battery of the modules loaded for the platform timer low in this process.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Call stack \Device\HarddiskVolume4\Windows\System32\ntdll.dll module
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\WPF\wpfgfx_v0400.dll
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll
  Political power: Active Power Plan
  The current power in use plan
  Plan custom name
  Map of GUID {e427f965-afc6-4f07-b387-e9be116f159e}
  Power politicsower Plan personality (on battery)
  The personality of the current power plan when the system is on battery power.
  Personality power saver
  Political power: video quality (on battery)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Mode of quality balancing video quality and energy savings
  Power politicsower Plan personality (Plugged In)
  The personality of the current power plan when the system is connected.
  Personality power saver
  Political power of political power Radio: 802.11 is a maximum Performance (Plugged In)
  The current policy of power for compatible 802.11 wireless network adapters is not configured to use reduced consumption patterns.
  Political power: video quality (connected)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Quality optimization for video quality mode
  Success of queries: analysis of system availability
  The analysis was successful. No problem of energy efficiency have been found. No information has been returned.
  Battery information: battery
  Battery ID Hewlett-PackardPrimary
  Manufacturer Hewlett-Packard
  Serial number
  Chemistry LION
  Long term 1
  0 seal
  Nominal capacity 54720
  Last full 54720
  Platform power management capabilitieslooking at the States of sleep
  Sleep States allow the computer to access the modes low power after a period of inactivity. The waking state S3 is the State of default Eve for Windows platforms. The waking state S3 consumes only enough power to preserve the contents of the memory and allow the computer to return to work quickly. Very few platforms are supported States S1 or S2 sleep.
  False S1 sleep taken in charge
  False S2 taken sleep support
  True S3 Sleep taken in charge
  True S4 sleep taken in charge
  Platform power management capabilities: connected standby support
  Connected standby allows the computer enter a low power mode in which it is always on and connected. If supported, connected standby is used instead of the system sleep States.
  Connected supported watch fake
  Platform power management capabilities: Adaptive brightness is supported.
  This computer allows Windows to automatically control the brightness of the built-in display.
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 0
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 1
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 2
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 3
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Controls of Type ACPI Performance (P) performance / Throttle (T)

  I found a thread on Microsoft answers community web site.  Unfortunately, it seems that Microsoft has not fixed even though this thread is over a year.  This has been driving me crazy.  In any case, the problem is with Windows 8.1 and is caused by the use of a Microsoft account to connect to the computer.  If the account is not connected, after a few hours the computer stops to fall asleep.  If you close the MS account, then the computer will sleep normally.  My dose is to convert my connection from the local computer to a local account and disconnect from Microsoft.  This process is easy to do, go into the settings of PC and disconnect the account.  It will keep your original profile.

  Here is the link to the thread that got clued in the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-refuses-to-sleep-automatically-idle/6ab4aaaf-31bd-4baf-ABC6-62ba8c8260aa?DB=5&page=2&rtAction=1452178632575

  I consider this resolved issue that HP is concerned.  Microsoft needs to address the issue.  I'm not interested in switching to Windows 10 for compatibility reasons and, in this regard, the same problem can exist in the W10.

• My iPod does not not after charging for hours

  My ipod does not not after charging for hours

  More details would be helpful please. What have you tried to do? What you are experiencing?

• Toshiba 19DV615Y: 12V battery - how many amperes / hour would be used?

  REF TV / DVD 19DV615Y - when on the campsite using a 12 volt battery, how many amperes / hour would be used.
  Info sought to assess the size of the required inverter.

  Found a few details about the ability of power.
  The camera seems to consume energy 38 Watt max

  Formula:
  Watts = amps x Volts
  Amps = Watts / Volts

  38 W / 12 V = 3.16 A

• Re: Satellite A300 - battery after upgrading to Windows 7

  Hi all

  I have with me the notebook toshiba Satellite A300.
  Bought the UNITED Arab Emirates. I just upgraded my pc to windows 7 and it seems to have affected my battery life, I guess.

  Anyone has idea about hw long battery last, I mean hours.

  Now, I can only use it for nearley 30 min... Some blog said of updateing the bios.

  Is this the reason realley or is the problem of windows 7 with my battery, experts advise please.

  Thank you, vb sbar

  Hello

  I don't know if the update of the BIOS would help, but if the new BIOS is available for you notebook series, then it s a m updated value.

  But you should also check the Win 7 power management settings.
  Please check this Toshiba HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  It s on vista but Vista power management is very similar to Windows 7.

  Here you must change the battery more user-friendly options.
  Check it!

• Firefox regularly (every 8 to 15 seconds) freezes for 1-3 (in seconds) after a half hour of work

  Firefox crashes on a regular basis (every 8 to 15 seconds) for 1 to 3 seconds after half an hour of work. I freshly installed my windows and firefox (without extensions), but the hook has yet occurred. Don't know how to solve this problem. Maybe it's a memory problem? (I have 4 GB of RAM, which should be enough). When it crashes, it leaves to scroll through, write or do something else, but if I try to do, he says, but after a few seconds. This happens regularly, it's very annoying, especially when it crashes looking at youtube - video stops, turn on audio and a video catches up with a video after a few seconds. Thank you very much for the help.

  This has happened

  Each time Firefox opened

  Is very long

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If that fixes it, disable extensions 1 by 1 to find the culprit.

• Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-1 - import a picture in iPhoto 9.6.1 in an existing project in very small. All the appe

  Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-

  1. import a picture in iPhoto 9.6.1 in an existing project in very small. Everything seems OK, picture looks that it imported, 4S etc but in fact there nothing there except a black screen, long 4 seconds. I tried all the suggestions in a dozen of discussions but nothing works.

  2 - by sliding the cursor (pointer) on clips in the project or the event of the flip backwards and return to normal once the cursor is removed. Clips of transfer of events to the project smoothly and are right side up.

  What can be done on the transfer of photos and clips reversal?

  Are you running at El Capitan?   He does not play well with versions of iMovie earlier than version 10.

  (Even in 10.1 some pictures with some computers may show a black in the viewer screen, although in this case there are solutions.)

  Geoff.

• Laptop battery drains to 10%/hour when to stop.

  Hello

  I have a Lenovo IdeaPad Y400

  Intel i7-3630QM 2.4 GHz

  8 GB RAM

  1 TB HARD DRIVE

  nVidia Geforce GT 650 M

  64-bit Windows 8

  This is the first laptop I have (I've always been using desktop computers) and I first noticed that leave my laptop in standby drain the battery to 10%/hour, so I decided to let him hibernate instead. Same thing happens, the battery drains to 10%/hour, so I try to stop... Same thing happens, battery drains to 10%/hour. So I removed the battery waited several hours, he plugged back in and noticed that he do NOT drain in any significant quantity. All this happens when the laptop is not reloaded also. Any help would be appreciated!

  I found a solution to the problem. All I had to do was disable quick start settings in power options. Now, there is no noticeable drain when the laptop is turned off!

• I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.

  I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.  How can I fix it?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Hello

  You need to support iPad not Microsoft.

  iPad - media choices
  http://www.Apple.com/support/

  iPad - Support
  http://www.Apple.com/support/iPad/

  iPad - communities (Forums)
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I am tyring to update my iphone and after about an hour, it gives me an error message saying: the network connection has expired.

  network connection timed out

  I am tyring to update my iphone and after about an hour, it gives me an error message saying: the network connection has expired.

  Hello JennySellars

  Your question would be better asked in the iPhone support communities in the link below. Thank you.

  https://discussions.Apple.com/community/iPhone

• E2000 HTTP Port Fowarding stops after a few hours

  Port forwarding Port 80 stops working after a few hours and requires the router to be restarted to begin to transmit again. The firmeware is the last 1.0.04)is Build 7. I need to work reliably for several days without intervention.

  I guess it is a problem of port forwarding because I can access the IP address on my network within my network even when I can't access it from outside my network. I use the appropriate IP addresses because it sometimes works OK. A peculiarity is that, when I can't access the page, it loads as totally blank white without error message.

  I suggest restore you the router (30 sec), wait for solid power light and then reconfigure the settings.

• my computer is turn off and gets very hot after a half hour

  for some time my computer is to do really hot after half an hour when im using it and then after a few minutes its deactivation and I have to wait like 20 minutes because he does not want to go back. It has been like that before, but it's only like 4 times... but now for 1 month it turns off... Please help me.

  Hello

  Question of heat and ventilation. If a PC remove ALL power and reinstall the cards memory and cables (both
  in fact, ends) - remove and replace them - are not just tight. Try adding a small fan blowing in or
  through the ventilation openings.

  If those who don't erase the question that you should seek immediate help from a real computer (no leeks store
  and the glances at a BestBuy or other big box stores) or the manufacturer of your system Support.

  Heat can cause very serious problems with your hardware in order to not try to solve this one more
  minimum without professional technical assistance.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• Printer Hp 6520 automatically shuts down after a few hours

  Original title - printer hp 6520 problem

  My new photosmart 6520 automatically shuts down after a few hours, it disconnects from my Win7 machine without using the material removal tool, if I get a nice loud bang when it does.  It is connected through the usb port on my Pavilion.  I don't mind to go to sleep, but I don't want to disconnect completely, because when I send a new print job, he didn't wake up automatically and print, I don't have to feed it manually upwards then it prints very well.  Any ideas on how to solve this problem would be greatly appreciated.  Thanks in advance.

  I could join HP support on this issue this morning.  There were two things - first HP printers now have a built-in surge protector so you should not connect it to an another surge protector.  Second, the default printer is delivered with activated automatic stop, turning off will do sleep, but not to turn it off, so that it accepts print jobs whenever one is sent.  So, if that helps anyone, good!  And thanks also for your help.  :^) gene