M40X 129 and slow Intel WLAN

I have a new M40X 129 and a netgear wg602 Access Point.

I tried several versions of Intel for the Bg2200 driver but all have the same problem:
After a while the performance of the connection drops to
about 30 KB/s. My other Clients WLAN with a map of network without WIRE WG511 (Toshiba 300 CDT) works with normal Perfomance.

Sometimes the perfomance raises more than about 1 MB/s and it goes up and down.

What is the broken hardware? Someone has an idea what to do?

Peter

Hi Peter

I've heard of this problem, but AFAIK there's no bug or malfunction of the equipment. One of my friends looked for answers and he told me that this question may be just a problem of Intel because with one another like Atheros wireless card it should not happen.

If I understood him right it depends on the method of authorization or something like that. If there is a possibility to try to use wifi PCMCIA card to check if there is the same problem.

Sorry, but in my opinion there nothing to do.

Tags: Toshiba

Similar Questions

  • Error and warning before and after the POST - Satellite M40X 129

    Hello

    I use a Satellite M40X-129, bought in 2005.
    After you have reinstalled Windows and all the necessary drivers (after more than 3 years, which was the longest time I used a windows ;-)) installation this afternoon, I meet the following situation when starting):

    (... check and all the stuff of ram...)
    Updated System Configuration data
    ERROR
    0271: check date and time
    WARNING
    0251: System CMOS checksum bad - default configuration used
    Press to resume, installation

    When I press F1 to resume, windows starts very well as I'm used to it.
    I can also access the configuration and need to update the time setting.

    Two scenarios:
    (a) the startup, shutdown, reboot: error message happen
    (b) setting the time, out of the bios with save the configuration, boot, very well until the stop/restart is required

    I tried to download the update of the bios to v1.60, but the configuration tool told me that this version is already in use and it will not progress.

    What I wondered: why is it happening? I don't think that the battery power is low, which was suggested to others in other threads, because it happened just after I installed the chipset/utils and other drivers from the toshiba download page.

    What can I do?

    -Bios update? -> Where can I find a new version? A tool (which I downloaded from a site linked to Phoenix Technologies) told me, there is an update for my Bios, but he wants me to join a subscription $29.99 / year

    -Swap CMOS battery? -> how remove m40x-129, tutorials? Don't want no f * ck it upwards...

    any other advice?

    Thanks for your help.
    Best regards

    Hello

    I think that the CMOS battery may be empty and therefore both a given in the BIOS is always changing the default value.

    Usually, you should be able to recharge this battery CMOS very easily.
    The user manual describes how to load this. Take a look at your manual

    As I m not wrong not the laptop must be ON and running and must be connected to the mains for more than 20hours.
    Then, the notebooks BIOS battery needs to be recharged again.

    Check it out!

    Good bye

  • My computer is old and slow. What can I do?  I have a 4 GB 800 Mhz DDR2 SDRAM.  The processor is clocked at 2.66 Ghz Intel Core 2 Duo I Mac

    My I Mac computer is older than 6 years and became slower and slower.  I added the memory once in the past which has contributed to the speed.  He was clocked at 2.66 Ghz Intel Core 2 Duo for a processor and memory is 4 GB 800 Mhz DDR2 SDRAM.  I wonder if I it is better to buy more memory or if the computer needs to be replaced, it still works very well for email and working on small documents, but it is really slow and crashes when working with images and large files.  Any advice is welcome.

    I have a similar computer.   It will accept 6 GB of memory.   It is far from slow and Etrecheck reports he cited as excellent.   I think you have some unnecessary baggage in tow.   Why not download and do a report for us Etrecheck.   Publish it as an answer, here, and maybe we'll find the reasons...

  • M40X-129: the two usb ports on the right does not work

    Hello people.

    Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
    even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
    Maybe it's a hardware fault. someone else has the same problem?

    Thanks, jens

    today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
    I'll ge see my local dealer Monday ;)

  • Satellite M40X-129: fans works with a maximum return on Vista

    Hello

    I have the laptop M40X 129 for 2 years and am very satisfied in this regard.
    But since the last few weeks, I have problems with the cooler.
    If I use a 3d task in the lower first 45, that the system works without any problem.
    But his is warming a heater and cooler will then maximum (you can hear it).

    From this moment, the system becomes very slow. I run the system with the highest maximum power and use windows vista professional.
    The laptop feels too hot on the underside (ram?).

    Is it possible to run the cooler from the start at a higher level, for example in the bios or in windows (some options?)?

    I hope you can help me,
    Flo

    Hi Flo

    Usually, there is nothing wrong with your laptop. If the internal temperature rises to a higher level, the cooling modules have to perform with maximum efficiency to lower the temperature!
    While the temperature is high the graphic driver Toshiba decrease the performance of the graphics card in order to avoid a temperature rise.
    That is why the laptop could run slowly!

    What you could do is check the cooling fans and if necessary try to clean with a compressed air jet professional. These aerosols can be purchased from the merchant to the computer.

    However, please note that the installed Vista is in need of more computer resources as the beginning s MS Windows operating system. All devices like CPU and GPU with superior performance and so the temperature is higher with Vista as using other Windows OS such as XP.

    Good bye

  • HP ENVY 15 Notebook PC: Which Intel WLAN adapt to choose for replacement?

    Hello

    I am looking for an Intel WLAN with Bluetooth adapter to replace mine with (laptop HP ENVY 15, product number: K2T39AV).

    I wonder if the product is compatible with my HP laptop:

    http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-8265-brief.html

    In addition, what is the current best cards Intel (with Bluetooth and Wi - Fi broadband) which are compatible with my laptop?

    Best,

    Rhéaume

    Dear customer,

    Please go through the below document, select PAGE-23

    http://www.HP.com/CTG/manual/c03943414.PDF

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    GBL84

    I'm not an employee of HP

  • Spectrum: Intel WLAN Driver for Windows 10

    I hope this isn't a disaster in the making.  Recently, I've had this laptop and have tried to keep everything up-to-date.
    I noticed it says to install two updates - we did it, we failed.
    The update that failed is titled "Intel WLAN Driver for Windows 10".  I tried to install this update several times now without success.

    Anyone has any advice on this subject?

    I thank you for your time and have a good day.

    Please try to install this driver provided CV... sp74902.exe (Intel Wireless LAN Driver)

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Portege M700 - latest drivers Intel WLAN produce errors of JUDGMENT with Vista32

    Hello

    I recently installed the new Intel v12.2.0.0 WLAN drivers. Since that time, I'm expieriencing sporadic Bluescreens STOP during startup. It took me a while to understand it is in fact the WLAN driver. But after installing Vista64 and Vista32 (Business Edition) the most recent original MS SP1 DVD and doing nothing else than the installation of the WLAN driver, I can confirm that it is indeed the WLAN driver that is causing the Bluescreens. Strangely, this problem does not apply to the Vista64. I don't know why, but since Vista64 missing support Toshiba UMTS modem, using it is not an option.

    I just wanted people to know, in case someone runs into it, so it doesn't have to spend so much to pin the source ;)
    Maybe some guys from Toshiba, who might be reading this can solve the problem, or to file a bug with Intel report. Until then, the latest version of Toshiba (12.0.0.73) works very well.

    Matthias

    I'm not very well why the page Intel WLan driver creates a few BSOD but Toshiba m is recommended to always use the drivers from the Toshiba page because these drivers are tested and certified.

    So if the WLan driver in Toshiba page works very well stick with this driver and don t use the Intel page

  • Power adapter for Toshiba Satellite M40X 129

    Hello guys,.
    hope this is the right forum to post my question in:

    I have a Toshiba Satellite M40X 129 (model No.: PSM4XE-01600CGR). My adapter is buggered so I need to get a new one. Bought the machine in Germany, now am in Tasmania / Australia. Being in a camp of the Valley remote until April, I won´t be able to go into a store with my laptop to try and understand, that the AC adapter / CC is suitable. We have internet here as our only communication, it is very important for me that sort.

    Can someone tell me, what type of adapter / power supply is planned or where to look?

    The one I ve been before is a LITEON, part No.: PA3432U-1AC3, model n °: PA-1750-09, input: 100-240V, 50-60 Hz, 1. 5 a, output: 19V, 3. 95 a.

    Thanks for your help and have a nice day
    Peter

    Adapters for your Satellite are:
    PA3432U-1ACA
    PA3432U-1AC3
    PA3432C-1AC3.

    Put this number in Google and you will find very precise specifications.

    By the way: If you already have the old adapter specifications I put t understand why you need some additional info. If there is no possibility to buy again until April, how do you get a new one?
    Sorry, but I m confused.

  • M40X 129 reboot system, if he has to work hard

    Hello!

    My M40x 129 worked fine for almost 3 months now, but a few days ago he began to restart the system, if it has to work hard. Often, just after the end of the loading of windows. I see a half second a blue screen and restarts Windows.

    My Win XP Prof is as clean as possible with Bitdefender AntiVirus, Kaspersky Anti Hacker firewall and Spybot... I do not think that the problem is caused by a virus etc.

    It would be great if anyone had any idea how I might solve this problem. Thank you very much in advance ;)

    Philipp

    Hi Philip,

    Make sure that your laptop is sufficient cooling and that the air intakes are not blocked, the laptop on a soft surface permanent or dust after being aspirated in the fan grille.

    Overheating is a common cause of sudden-offs power

    HTH

  • HP Pavilion - 550-259na: Intel WLAN Driver SP74163

    Tried to install this driver from the tab updates from HP Support Assistant.  Installation failed repeatedly. (Error - failed installation.)   How to perform a successful installation?

    Down pipe

    Looks like you are trying to install the wrong driver.

    Looking at the page HP drivers for your PC Win10, I don't see this softpaq for all Intel WLAN driver.  Instead, I see the sp72159 softpaq.

    This page is here: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-550-200-Desktop-PC-series/9259612/model/11413200

    Good luck
    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
    If my posts resolved your issue please click "accept as a Solution.
    ========================================================================

  • Satellite M40x-129: how re-activating touchpad before you connect

    Hello.
    It seems that the function (Fn + F9) to activate the touchpad does not work before opening a session on windows.

    I use the original utility on my m40x 129.

    Hi locus

    As far as I know all the tools and services are active after full OS start and FN + F9 will not work before the registration of the user.

  • Satellite L670 - 14K - cannot download and install driver WLAN

    I formatted my pc with Windows 7 64-bit and Windows update can't find a driver and I can't download it from the Toshiba site. It redirects me to another page and do not access it.

    The site is http://aps.toshiba-tro.de/wlan. Can someone give me a link or something to install this driver.

    Hey Buddy,

    > I can't download it from the Toshiba site.
    Maybe it s temporary server issues so you should test a few hours later, but generally the Toshiba WLAN Portal is still available.

    Anyway, if you have an Intel WLAN card for example, you can download it on the Intel page directly (www.intel.com) or Realtek (www.realtek.com).

  • Satellite A200-1N2: I should udpate Intel Wlan driver through update of Vista?

    Hello

    I have two questions pls...

    1. I have a laptop Toshiba Satellite A200-1N2 core 2 Duo

    There is a * (optional) * updated by Windows Vista to...
    * Update driver Intel (R) PRO/Wireless 3945ABG Network connection *.

    I would like to know if it's a good idea to go for the update of this window gave or not?

    2. I've heard that it has deepened the Start button > all programs > Toshiba > a place where I can go and it could me check for all needed updates for the drivers of Toshiba and all necessary updates...

    Pls any idea where to do it?

    Thank you

    Hello

    This update seems to be linked to the Intel WLan driver.
    I think it s not necessary to update the Intel WLan driver through update of Windows Vista.
    If you want to update the WLan driver then visit the page of the Toshiba Wlan driver or the Intel page.

    With regard to the second question.
    You can visit the European driver Toshiba page and there you can check what newer drivers have been released.

    There is also a tool called Toshiba [Tempro | http://eu.computers.toshiba-europe.com/innovation/generic/TEMPO_RELEASE/] that keep you abreast of software updates and the latest Toshiba driver as soon as they are released

  • T30 - no intel WLAN driver for Windows 7 support

    Hello

    I have the Intel WLAN Mini-PCI 802.11 b card in my T30.

    But there is no driver for Win 7?

    I was really sad, because it worked really well, but I can't use it without WIFI.

    Someone at - it that this problem corrected?

    Thank you

    Best regards

    Christian

    Welcome to the forum!

    Your wireless card is not supported under Vista and will not be supported in W7.

    May I suggest that you upgrade to Intel 2200BG, since the 'b' - only cards are becoming a little long in the tooth, anyway...

Maybe you are looking for

  • Y580 gpu upgrade?

    Hi new to the forum everything I wanted to know - is it possible to update the graphics card in the y580? I wanted to put a NVIDIA gtx680m in there if possible.

  • HP dv6 envy: wipe HARD drive

    My laptop could not start. He kept saying 'Please Wait'. I took the HARD drive and made a slave on another computer; took all the user files and then formatted the HARD drive. When I reconnected the HARD drive in its own machine, the computer says th

  • MBSA - NT AUTHORITY\Network Service reported as invalid domain name

    We use a Small Business Server 2008. When we ran a report using MBSA 2.2, we received a critical error incomplete analysis on the database of MSSQL$ MICROSOFT ##SSEE with error: This represent a field.  Baseline Security Analyzer cannot determine if

  • PAL.icd file seems to be broken

    While playing with some settings to the MAX without doubt, I did something wrong, I guess that I broke the PAL.icd file... Should I replace, if so where. That's what I see, when in the channel properties I want to change it to PAL. Other types work v

  • LAN on PIX 501 interface

    When I try to change the IP Address of the LAN interface (must be 192.168.5.1 (next year it will change to a 10.1.1.1) and when I change it says it can't change because of the subnet pool dhcp.) I tried to add a 192.168.5 dhcp pool, but it still will