M40X-309: I can not find wireless device in Device Manager

As soon as I bought my M40X-309, I've updated for Win XP Pro. Everything works well, but I can't use my wireless device.

I can't find the Device Manager, it shows only one network device (other than 'real').

When I tried to change his player windows keep watching, but has not found the right driver.

I tried to install the driver intel driver atheros (I don't know which is the right one), but the unit still apears as "?" and does not work.

Can someone help me? Thank you

Hello

This device was shipped with an Intel 2200bg WLan minPCI.
In this case, you need a driver for Intel. Visit the Web from Toshiba or you download the driver from the Intel site.

Tags: Toshiba

Similar Questions

  • My laptop can not find wireless networks

    My laptop can not find wireless connections, that it works fine when I use an Ethernet cable.

    It works on 64-bit windows and has a intel wifi link 1000 series

    The most likely reason is that the wireless card is turned off or disabled.  Most laptops have this feature in order to save battery power if the wifi is not necessary.  Depending on your laptop, it is a physical switch or a combination of the Fn key and one of the F keys.  See your User Guide for more information.

    You can also check the Device Manager (click the ORB start and type Device Manager and then press the Enter key).  Expand the "Network adapters" section by clicking on the arrow to the left and then double-click the entry for the Intel Wifi Link.  Check 'Device status' in the 'General tab '.

  • Can not find Bluetooth device

    Whenever I click on bluetooth settings he throws me on the parameters of laptop and can not find the device that is a forum... Help, please

    Hello Joseph,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You did it all change software on your computer before the show?

    Thank you for details on the issue.

    This problem can occur either because of corrupt device drivers or incorrect device settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + C keys and click on research.

    b. type Troubleshooting in the search box, click on it in the search results.
    c. click 'show all' and then click 'hardware and devices'.
    d. click on 'Next' and follow the on-screen instructions.

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions in this article and check the issue.
    Reference:
    Why isn't Windows find my Bluetooth or other wireless device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • MacBook can not find bluetooth devices

    I just bought a new Macbook.  He can not find bluetooth devices.  The device is fully charged and so forth.  He saw the mouse for a fraction of a second, but then he fell.  I tried other bluetooth devices.  It does not find.

    I had this problem too, turn on the Macbook and off is your best bet. But if this does not work, you can go into the settings of your macbook. Settings - Bluetooth - advanced and ensuring that all things have been checked. Hope this helps, good luck to you.

    ~ Michael M

  • New drivers Conextant Audio can not find audio devices

    I have a lenovo u410 and when I updated to windows 8.1 like many people my home dolby cinema did not work.

    So, I tried to find the answer and fix it myself. I uninstalled all audio drivers and downloadled then the new but when I try to install it "can not find the device" I don't get any audio from my laptop and I don't know what to do.

    I'm confused, I have two audio drivers in my drives C: and D: (D: is a SSD) Please help I really like this laptop but I had a number of problems with it.

    And now that the fixed so I appriciate the help, but I don't really know what happened that makes get fixed haha

    Solid_Curver thanks, I am always impressed by the lenovos customer service

  • Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

    Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

    Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link:
    http://www.Apple.com/support/iPhone/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

  • Updated to Windows 8... now can not find wireless network

    I've updated from windows vista to windows 8. Everything went well, but now the computer can not find wifi connection while it worked before the upgrade. Any ideas what's past? Or what I can do to find l ' internet and connect?

    Thank you.

    This 'upgrade' is really not much more than a NEW installation of the operating system.

    Did you visit the manufacturer's web page a computer for your computer model - more precisely their downloads and drivers for your system model - the article and enter all drivers of Windows 8/8.1 available to them for your if everything goes well supported by said manufacturer under Windows 8/8.1 computer system?  (This is a manual process.  Microsoft/Windows doesn't make or can't stand most (if any) of the hardware components inside your computer.  You must obtain and install these drivers yourself.

    The motherboard chipset.

    Hard drive controller.

    Video.

    Audio.

    Network.

    etc.

  • Linksys E2000 can not find the device!

    Hello

    I have Windows 7.

    My ISP is a DSL company. I've been with this company for several years now.

    I still have in my possession a wired router that I am currently using as my E2000 does not work.

    In my computer, I have a network and a wireless network card. Both claim that the ' device working properly "in the Device Manager.

    I tried to do the work of E200 for awhile now and I'm about to return it to the store and buy something else.

    I insert the CD and I followed instructions more than once (even tried different things).

    I always get to the screen that says:

    We now set up your LinkSys E2000.

    Please wait, this may take up to 5 minutes.

    Aftetr awhile I get the message saying that it cannot find a device and that if I use a laptop that there could be a 'switch '. When this does not work I can plug in the back of my old router and it works fine.

    I bought this router 7 days ago and it still does not work. I used to work for a DSL company and I was in technical support. I'm not a beginner.

    Please help that this is the first time that I buy a product Linksys. I'm about to lose patience with this.

    Thanks in advance

    So long Linksys you're going back to the store. Never

  • Can not find the device adapter Inspiron 1515

    Thanks in advance. I reformatted my computer a virus. Now, I can't connect to the Internet... "Windowns can't find any network." When I try to install the Mini PCI card half Dell Wireless WLAN 1515, the process fails and a popup indicating that the 1515 peripheral adapter could not be found. I reinstalled the other drivers, just having problems with this one. Thank you!

    Hi jasongarvey,

    I suggest you have a look at the response by Umesh P, from the following link:

    Adapter Dell Wireless 1515 device not found

    I hope this helps.

  • can not find the device via blue tooth

    I can't pair my rapooH6080 with my laptop (windows 7 ultimate 86 bit Asus A46C series). I can't find my headset with bluetooth ad device option. I'm totally stuck.please help.

    The question therefore, with the laptop.

    Ypu can find the drivers here:

    http://support.ASUS.com/download.aspx?SLanguage=en&m=A46CM&OS=8

    If you can't find the drivers or the drivers are not compatible, contact Asus support for assistance.

  • Computer laptop Windows 7 can not find wireless network connections

    My Samsung RV510's laptop had windows 7 on front and without wire worked but recently my hard drive for this laptop broke and I had to get a new HARD drive. Now I have a new one that I installed windows 7 on it and now it cannot find wireless network connections even if there is a broadband router in the same room as the laptop. When I try to connect to a wireless network, the computer does not find.

    You have turned on WiFi?  Have you checked Device Manager to see if your wireless network card has a driver?  The different procedure for Urning edited that WiFi on East and model, so you for each brand will have to read your user guide - I promise he won't give you the leprosy!  :-)  To check the driver, click Start and right click on computer, then click Properties.  Click on Device Manager and look for the entry that says that the network cards.  Click the arrow to the left and look to see if

    There is a! or? next to him.  If so, you must download the driver appropriate from your manufacturer.

    Good luck.

  • Can not find the device

    I use the C6180 all-in-one printer.  I use the software driver or the newest utility on the HP website.  I use a relatively new MacBook Pro with OS X 10.5.6 and all updates.  I connect the printer to the network via LAN cable.  I can print to the printer very well, but I can't communicate with the printer to do other things, for example, copy or scan.  When I use the HP Device Manager and go to 'Information and settings' and select 'Choose the Device', no device appears in the window under "select your HP all-in-One device.  All of the tasks that I try expires because no device is found.

    How to associate the printer to my computer so that I can use the functions 'all' of my printer 'all-in-one '?

    Thank you

    Mike

    Solution: I have turned to cycling the printer, but that has not changed anything.  I then used the Setup Assistant, which I thought I had already done when I originally installed the software.  But I do not... I have seen a few pictures, I had not seen before and after that I saw an entry in the device dialog box.  Everything seems to work now.

  • Computer can not find wireless networks

    Hello

    Whenever I restart my computer I have to open the part of the CPU and re services - enable Automatic Configuration Wireless for my computer to recognize networks wireless in the region. After that I then have to go to the Advanced Options in the wireless network connection properties, and then click the "use Windows to configure my wireless network. Then at that time, I can connect to my wireless router. I know that this is not normal on XP, because I've used it before, but before that I took off my computer Vista and installed XP, I had none of these problems.
    Thanks in advance

    Have you installed the correct WIndows XP driver for your device without wire against the manufacturer (and their software that can replace software config wireless XP.)

  • OfficeJet 6600: iPad suddenly can not find wireless HP printer.

    iPad, suddenly cannot find a working HP officejet wireless printer!  He worked recently.

    Hey @dburbage,

    Welcome to the Forum from HP Support.  I understand that you are unable to print from the iPad using your HP Officejet 6600 e-all-in-one printer.  I want to help you with this and can have steps that you need to restore this functionality.  What you describe, it seems that you use AirPrint.  I will answer my advice for this type of installation, but if you use ePrint, please let me know and I'll give the information you need.

    You have confirmed that your printer is connected to your wireless network?  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, powercycle your equipment as explained below:

    1. Unplug your modem/router
    2. Turn off your printer and your iPad
    3. Wait 60 seconds
    4. Plug in your modem/router back in and wait that he reconnect to internet
    5. Turn on your printer and once it starts up as normal, confirm that it is still connected to your wireless network
    6. Turn on your iPad

    After completing these steps, you are able to connect your printer with the iPad?  Please let me know the result of your troubleshooting by responding to this post.

    Have a great day!

  • Satellite Pro A300 can not find USB devices

    Hello forum,.

    We have a customer who bought a Toshiba Satellite Pro A300 with us, but he gets a strange mistake about it.
    It connects to a hub 5port Sandberg USB 2.0 to one of the usb ports, the pc detects the hub, but when it connects a /Memory stick to the hub, nothing happens.
    the hub and the memory stick works on other PCs.

    I hope someone can help.

    Best regards

    John Bork
    DANBIT A/S

    Hello

    What happens if you connect the memory stick directly without this USB hub?
    I also had a USB hub, but these hubs are a little complicated and delicate USB specification allows a certain power and according to the devices that connect, you need to use an active USB hub, that means with external power supply.

    But normally, Satellite Pro A300 should have enough USB ports if it of needed, I would recommend a USB hub with 2 or 3 maximum ports

Maybe you are looking for

  • Satellite A100 just stops

    My laptop will just down for no reason and at different times?The fan seems to be working and I reinstalled windows, but it happens again- All ideas

  • FS: Sony F55 complete shooting Kit

    Hello, unfortunetly gear I'm ready to sell my Sony F55 shooting Kit including the following: 1 x camera of Sony F55 1 x recorder Raw Sony R5 3 x 512 GB AVXM cards 1 x OLED Sony EL100 viewfinder 1 x Kit of LWS ARRI including BP8 1 x Solidcamera Scatte

  • Format analysis of the measurement data of variable length for Newport THP/N

    I try to analyse the response of a sensor of zED-THP/N of Newport. The answer is back with ID SEQ TYPE TEMP C HUMD %. ID = 1, SEQ is constantly changing, TYPE = 15, temperature = nnn.n I am trying to capture the Temp, and this presented a challenge.

  • DAQmx writing

    Hello I am trying to simultaneously acquire a signal while generating / writing a signal chirp (swept sine wave), which varies from 0 to 800 Hz. before, I was able to do it using a loop timed with 1 KHz clock and 100 msec period. The sampling rate fo

  • Where can I find a description of the KB911895?

    The last batch of updates of high priority for Windows XP Professional includes a 'Microsoft - other hardware - HID Non-User Input Data Filter (KB 911895)' update. Search in the knowledge base for KB911895 I can't find a description of this update. U