M5-581TG - ETD.sys SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

Similar Questions

• NEED HELP (atikmdag.sys) system_thread_exception_not_handled

  HP 15 g-014dx is the model, btw

  In the past, occsionally I would get that a blue screen with the message of system_thread_exception_not_handled (atikmdag.sys) and my laptop will re-start. But it is not all that often. When he did, it would be when I got several tabs open and watched a video. At this point, I looked at the error and saw in another thread, the suggestion of CCleaner, tried that myself and it seems to help.

  But today it happened a little bit. I tried to run CCleaner, but it did not help this time. And now it's happening even if I have just a tab open with the video I am watching.

  Hi there @streetlight

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you've been found BSOD message (atikmdag.sys) system_thread_exception_not_handled. I'm happy to help you with this.

  What operating system running on your laptop. Check out the following, if you need assistance with this information.
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Are the website of your video driver update from HP support? HP TouchSmart 15-g014dx Notebook PC (ENERGY STAR)

  A common cause of this type of problem is the hardware acceleration feature, either from your browser or Adobe. It is also possible that it could be a problem with the driver for your graphics card. The correct driver would vary from one model to the other.

  In a first time, here are the methods to disable hardware acceleration in different browsers and adobe flash.

  Windows 7: Internet Explorer hardware-accelerated GPU - start-up or stop -sevenforums.com

  How to activate GPU 'Hardware Acceleration' enable or disable in Firefox - sevenforums.com

  How to turn off acceleration hardware in Google Chrome - solveyourtech.com

  To turn off hardware acceleration in Adobe Flash Player:

  How to disable or enable hardware acceleration? -forums.adobe.com

  Those give a try and see if it helps.

• atikmdag.sys BSOD appears on Satellite C850-19 q after 8.1 Win update

  Help, please.

  I have Satellite C850-19 q (PSCBYE-00L00GY4), Windows 8 x 64, after that I have updated to 8.1 on store, show me BSOD (atikmdag.sys system_thread_exception_not_handled).

  I tried to reinstall windows and install again all drivers and updates, nothing has changed.

  Do you have any suggestions?
  Thanks in advance.

  Sorry for my mistakes in English

  Hello

  Have you updated your operating system instructions offered on http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• C50D-A-13W (PSCGWE) satellite crashes during playback of video files

  Hello

  my laptop stops during playback of flash (like youtube or facebook videos) files, and then there is a blue screen with a sad face and the following text: "(atikmdag.sys) system_thread_exception_not_handled.
  my system is windows 8.1 and I already reinstalled the display driver (I used this one: http://www.toshiba.de/innovation/dow...jsp?service=DE)

  There is no virus or maleware on the laptop.

  Thanks for the help!

  atikmdag.sys is part of the ATI graphics card driver...

  I think that the problem is caused by the graphics card... probably the ATI driver is the reason why the BSOD appears...

  The laptop was not equipped with a dedicated GPU, but the graphics card part of the Kabini A4-5000 AMD processor AMD Radeon HD 8330 done graphics card

  Perhaps you could uninstall this driver and install a new update...

• MDT 2013 Thinkpad Yoga 12 - WinPE boot problems

  We have two models of Thinkpad Yoga and use the same ethernet USB dongle to run MDT and their image with Win 8.1.

  Type 20 c 0 works very well. When we arrived the 20DK of a new type, we had some problems with our image of fat because of the different hardware profile and we weren't using a configuration of total control for drivers on our MDT.

  I created a new MDT installation on a virtual machine and I use the method of total control of the management of drivers by model. I have a profile of selection for winPE and imported the drivers of storage and network for both models (x 64 only, we don't have any x 86). I tried initially the USB3 Ethernet adapter driver I found under downloads for the 20 c model 0 but have tried since the upload of pack pilot SCCM and other I found specifically for the adapter realtek and SCCM, but nothing has changed. The current versions of pilot in my winpe folder are 8.15.0701.2014 and 8.8.0911.2013. Have updated the deployment share, copied the contents of the x 64 folder and copied the litetouchx64.wim in the sources on our USB startup folder and renamed to boot.wim.

  Currently on the 20DK I get the initial screen for MDT spash with blue background, but before any connection charges of screen I get the blue screen of crash with error (ndis.sys) System_thread_exception_not_handled. I guess I do know for sure that it is a problem of network driver but because it fails before the same connection to the deployment share it led me to believe that this was the case. I tried to turn off 3 USB mode in the bios to see if this will have an impact, and he didn't.

  The 20 c 0 still works fine and I was able successfully to the image (from my old wim of fat that I copied from my old server mdt)

  Completed up to add all the drivers for this model in the folder of WinPE drivers and who took care of her.

• Pavilion 14-al015na: new HP laptop reboot without warning

  I would like to start by saying that I am not savvy computer very waves and too complex answers will just go over my head. Honestly I do not know if I chose the right subforum for it (sorry if I don't!). Please try to put the answers in stupid people talk

  I bought a HP Pavilion with a processor intel core i3 (this: http://www.johnlewis.com/hp-pavilion-14-al015na-laptop-intel-core-i3-8gb-ram-1tb-14-natural-silver/p...) there are less than a month and I barely use it's really for uni starts back. Despite this, I had problems several times with it restarts without warning, while I'm in the middle of something. I also had this error message once: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (bcmwl63a.sys) as it turns off. He also asked to be restarted for updates and just because he apparently wanted to basically all the time it is turned on.

  I moved all my documents, photos and music from my old laptop (also a HP) to my new but I have left the program etc. files behind. My old laptop had issues where it would freeze and become completely unresponsive (does not restart as in the case of my new laptop) and have to be turned off by the power button, and anything I worked on to lose and it was one of the few reasons I decided to replace it. In addition, whenever I turned on it he grew up a pop-up, the kind you see when you install a program. I uninstalled the program in question, but the pop-up persisted. I've always had a McAfee antivirus protection on all of my devices - computers of my phone, which was connected to the time - but I guess that something got through between the cracks?

  Basically, I would like to know if the issues with my new laptop are the result of a virus or not (the same who touched my old laptop?) and of course be saved or not. Thanks in advance,

  Estella.

  @leaf2,
  Thanks for joining the Forums HP, Estella.
  I'll be happy to help you!

  I understand that your laptop will restart without warning after posting the message-"(bcmwl63a.sys) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" once, it freezes constantly and frequently reboots, here's what I recommend that we do:

  According to my research, it could be a bad driver, the origin of the problem otherwise we will need to perform a test of hardware on your memory card, I'll let you know how to do this, later.

  To remove the bad driver, I recommend the following steps:

  1. Start Control Panel, click hardware and soundand then click Device Manager.

  2. Expand the node under network adapters, right-click the device entry, and then click on Properties.

  3. Select the driver, and then click Roll Back drivers, if it is gray in color (impossible to click) select uninstall drivers.

  Made the above, restart the computer and then go to the HP website and download the latest drivers for your network card: Click here.
  
  If the problem persists, click here for - "How do I run a test of hardware on your laptop.
  
  Keep me posted!
  
  Kind regards

• 'Boot Camp 6' will not install the drivers of "Key board" on windows 10!

  Hello

  Yesterday I received my installation "Windows 10" doesn't work anymore, when I tried to boot into windows, a BSOD.

  It's the error: "(KeyMagic.sys) System_Thread_Exception_Not_Handled.

  I tried several solutions, but none of them helped.

  I removed my boot camp partition and to install windows again and this time it's the same thing when I was installing boot camp drivers after a successful News '10 Windows' installation!

  After reboot I reinstalled successfully boot camp drivers, but the function of the keyboard keys does not work, in fact it completely does not recognize the keyboard!

  What can I do to solve this problem of blue screen of death?

  Finally, I was able to get my problem is solved as follows:

  1. I removed my existing Windows Partition

  2. I installed all the updates that are recommended for my 'Mac OS X' of 'Mac App Store'

  3. I created "Support of Windows Setup" again, using "Boot Camp Assistant".

  4. first of all, I checked the first 2 options to create 'Windows Installer' and 'Download Support Windows software' and then after that it's over, I did it again "Boot Camp Assistant" and I chose only 3rd option to create a partition and install windows

  5. Once successfully installed Windows, I installed "Boot Camp" without any problems and everything works fine!

• HP 15-g057cl Notebook PC: System_thread_exception_not_handled (atikmdag.sys) Help

  This just started happening a few days ago and now happens several times a day and is very annoying. A blue screen of death appears saying my computer needs to reboot due to the error: System_thread_exception_not_handled (atikmdag.sys)

  Please help me solve the problem. As I never said until a few days ago, it happened but now it happens several times a day at random times.

  Thank you

  Ryan

  Revans.

  Try this.

  http://download.CNET.com/CCleaner/

  REO

• HP laptop: BSOD, «SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ATIKMDAG.» (SYS).

  I recently bought a HP laptop.  The product number is F9H90UA #ABA and the model is 15-g071nr.

  Whenever I run online of youtube videos, the computer will crash.  I get the error, SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ATIKMDAG. (SYS).    Is this a common problem with this model?  Thank you.

  Invoke the charm of the search and type in HP. You should see an icon that says HP Recovery or Recovery Manager. Click on it.

  That should start the HP Recovery Manager.

  Click on drivers and Applications reinstallation

  

  Now find the NVIDIA driver on the list. Click on the box to the left and tyhen, click on install, down, down to the right.

  The image is only an example of a loan recovery Manager product formaer.

  

• SYSTEM_THREAD_EXCEPTION_NOT_HANDLED igdkmd64.sys

  I've owned windows 8 some time ago and had to delete on a different system. and I'm trying to install in on a home build with windows 7 installed. It seeks to install OK until the end, when I see this message

  :(
  your pc has encountered a problem and needs to restart. We are only collecting the error information, and we'll get back to you.

  then the error code

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (igdkmd64.sys)

  MW

  Pilot verifed and connected to the device driver wireless Extensible athrx.sys of Atheros Communications, Inc.  I remove the current driver (from 2010) and install the most recent driver available

• NDIS.sys BSOD on Windows 8.1 x 64 with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  Every few weeks on Windows 8.1 x 64, I get a BSOD in ndis.sys with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED.  My file version is 6.3.9600.17031, most recently amended on 22/02/2014.  I have the minidump and driver file compressed on my drive.  Is there anyone from Microsoft that can help me solve this?

   We need the logfile itself (called DMP file) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

  If you use the blue screen view, which has crashed, or a similar application, don't.  They are wrong at least as often they are correct

• SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (Usbd.sys)

  I use a Samsung UltraBook 5 series running Windows 8.

  After a few weeks, when I start my laptop (usually after I put it to sleep), I'd get a BSOD with the message

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (Usbd.sys).

  After 2 or 3 times, I restored my laptop completely. After 2 weeks, it again. I don't know what could be the reason. But im announces a few possible things that could be the cause. Someone please tell me what to do.
  Im running avast antivirus. I use a usb to LAN adapter, I use spotflux or ultrasurf (proxies). Someone please help. I don't know how to get dump files and all that. Then please ask. Thank you!
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  
  Co-written by JMH3143
  Team Zigzag3143.com  

• SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (asusTp.sys)

  I have ASUS k55 I7 with windows 8 pro preloaded...

  everything was working ok, but sometimes the blue screen appears with this message: system_thread_exception_not_handled (asusTp.sys)
  I searched the internet for information, but I found nothing.
  Can any one here help me with this?
  Thank you...!!!

  KY

  This accident was related to AsusTP.sys Asus TP Filter Driver ASUS Corporation and Kaspersky.

  I remove KIS and use the built in Defender and re - install the latest driver of ASUS.  If this is the latest driver you should always reinstall it as drivers are damaged.

  Kaspersky is a common cause of BSOD.

  
  

  I remove and use defender to test at least.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip

• After the conversion of server 2012 system_thread_exception_not_handled winhv.sys

  Hi all

  After the conversion of a machine Server 2012 (that is running Hyper-V) and from VMware vSphere 5.5 I get a BSOD and system_thread_exception_not_handled winhv.sys

  I know that I could use to disable the Hyper-V technology, no matter what else it could be?

  ~ eric

  No, I was simply convert a machine that already had the active Hyper-V role. I disabled Hyper-V and transformed again and it started properly.

  However, I found this article on editing the vmx file to allow a machine with Hyper-V enabled to run as a guest in VMware. http://blog.pluralsight.com/run-hyper-v-vSphere-5-1

  ~ eric

• WIN8 random BSOD: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED dxgmms1.sys

  This seems to be a fairly common problem, based on my research on google, but I'd love to have someone take a look at my minidump logs and see if they can identify something specific. Short description: Win8, newly constructed box, experiences BSOD random with the message of the title line. These BSODs seem to happen completely random, usually when the computer is idle and unsupervised. I am trying to exclude a hardware failure.

  
  
  Link to files Minidump and msinfo32 save:
   https://docs.Google.com/file/d/0BznXFTIW9ev3Y1lEcWlDWjNZalE/
  Thanks for any help!

  Hello

  We have different various bugs:

  System_service_exception (3B)

  An exception occurred during the execution of a routine that passes from non-preferred to the privileged code code.

  This error is usually related to a video driver issue, however related material memory is perhaps just as well.

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)

  A system thread threw an exception that the error handler did not.

  Usual causes are a bug in a device driver.

  We have an access violation in this discharge - c0000005. If we run a .exr on the 3rd parameter of the error checking (address record exception), we get the following:

  3: kd > .exr 0xfffff88003fb3798
  ExceptionAddress: fffff880039e7da9 (dxgmms1! VidSchiSubmitRenderCommand + 0x000000000000019d)
  ExceptionCode: c0000005 (access violation)

  We can see dxgmms1.sys is mentioned, which is the driver of DirectX MMS system.

  Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1 a, {41201, fffff6800007c840, f970000260266847, fffffa80107f1bd0}

  Parameter 1 of the bugcheck is 41201 which is part of the "other" subtype regarding this error checking. This means that an unknown memory management error has occurred.

  If you have already messed up with video card driver versions, run a Memtest for no. LESS than ~ 8 going on (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick