M5 583P stop failure, once again...

Similar Questions

• How can I get the fix for Vista Home Premium described in kb313222 reset the default security to be permanent? Reboot made my sharing failure once again.

  I ran the command secedit / configure according to the kb313222, but I find I have to redo the command after that I reload.

  Also, as a side note, my standard connections have simply disabled, so all I had to do was to reactivate in user accounts.

  Hello Halima S,.

  Thanks for the replies and the direction that worked - somewhat.  I agree that the script is very nice, but I also saw that he really did exactly what I had done before.  However, as the source of the information and of the validity of the script I have very slow and tested every step this time before restarting and found that when I re-enabled the guest sharing connection stopped working.

  My hypothesis is that if the protection of password for sharing is enabled, then a connection without password fails the initial security checks and therefore do not allow all connections.

  The only thing that I forgot that "what has changed", is that we had a visitor, so I enabled the guest account, or I had the chronology wrong since between the two, I went to an open wifi and disabled sharing now so naturally I thought I was doing something irreversible.

  Thanks again,
  Tony

• Whenever I restart my computer the error message below is displayed. How can I stop appearing once again?

  xmitextReaderConstname could not be located in the dynamic link library libxm12.dll

  Hi quite Bourn,

  What operating system do you use?

  I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion 15 laptop: Short hard drive DST check failure... once again.

  A question that I had resolved a few months ago started occurring again, in which the laptop is struggling to load things when started and soon after falls down and has to be restarted. I guess that means that the hard drive has failed once again and so I have no doubt about how to solve this problem, but I write this query to ask: why? Why has a laptop, I had since not even a year at this stage has already had the same problem occur twice, even with the replacement of the piece that broke the first time? I am willing to assume that this is something to do with excessive I will admit that it is enabled for a good part of almost every day, often for several hours I play the games on Steam on it. Currently, I do not plan to have the hard drive replaced again because it is clearly an issue that will keep occurring that the way things are and if I can get a PC that won't break every time a gust of wind so it hits. Any information on why this happens and how it could potentially be avoided in the future is appreciated, especially if it offers a solution that doesn't involve payment of an exorbitant amount of money.

  The worst enemy of hard drives is heat. If you play on a computer that is pushed to the limits of the game, a lot of it can wear on a hard drive for a few months. You get a lot of activity of fan during the game? A cooling pad may be an option, or on a computer box of Grandpa instead of a laptop for the games.

• HP notebook a1u60av my ports on the left side 2 stop working. Once again

  Hi This is my second time that my ports on the left side are out. the first fix was great.  the usb on the right work well.    Maybe I need to replace the ports. under the Device Manager it say they are o k you can help me again. Thanks again my model is two years.

  BillyG

  [Personal information]

  to (KNRK) thank you very much. I am so happy that everything on the laptop works very well. all usb. again, the hp forum is really the life line.  meaning, I have been using the forum, I became a little more knowledge and a little tech savvy.   you make me proud of myself.    Once again thank you.

  Billy 'g'

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• Good way to stop and run again a FPGA reference

  Hi guys!

  I have some problems when I try to stop, and then rerun an FPGA vi, I explain.

  I have two DMA FIFO to send data to the FPGA of the CPU and the CPU for the FPGA. When it receives data, the FPGA treats them and sends them to the CPU, and according to the result of the CPU does something. For example, it can be turn on LEDs or to rotate a motor continuous.

  But to do these actions, I have to use a "personality FPGA", i/o pins and LEDs appear to be managed by the FPGA core. So I have to close my reference vi FPGA in charge to receive data from the CPU, make my power on LED and then after raise again my FPGA VI once again, if I don't do LED blink or stay without effect rotation motor... But close and start again the FPGA VI creates problems when running, especially for the previous reading on the FIFO DMA awaiting... I tried to intercept errors on the FIFO to restart the FPGA VI with a good time but nothing... I am lost and I think Miss me something, concept, or something else.

  I can't share my code because I work for a company, but I would like to know if you have VI with this type of structure: a FPGA reference that must be stopped to allow interaction of material with the FPGA default personality then run again, all with good timing...

  I hope I'm clear, but if it is not the case, I can rephrase if necessary.

  Thank you very much for the help!

  Afghow.

  I do not understand why you need to change the bit file is loaded in the FPGA.  Why you cannot add code that handles the inputs/outputs to your FPGA processing?  Why do you still need to send data to the host (CPU)?  Just having the process FPGA data and change the output directly.

• Windows 7 is AGAIN, once AGAIN!

  Receive an email from HP that they are once AGAIN more of their computers pre-loaded with Windows 7 instead of Windows 8 shipping!  This seems to be a tacit admission that Windows 8 SUCK!

  I bought a HP Envy 700-027c in August and HATE Winows 8 and we tried to downgrade to Windows 7.  I have a HD "Virgin" I used to load Win 7, but there is no driver for everything!  Even with the Windows 8 drivers, that I managed to find would give me an error message.  And I couldn't find any Windows 7 drivers for my hardware.

  I called HP customer service, but they wanted to get their 'Top' (i.e. pay for play) group.  Because I have HP deviating to Win7 as an admission of failure to win 8, it must be viable and no way to cost us down!  I have a copy of Windows 7 Pro that I would use.

  Everyone?

  Hello:

  You can easily install W7 64-bit on your model.

  Use the W7 x 64 drivers of this model (in the original category).

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5231222

  The only driver I do not know the hand is for devices without wireless and bluetooth, but that should be no problem, once you post the hardware ID's for those.

  After installing W7, please post the hardware ID's for the network controller and the bluetooth controller.

  Use this guide to find out how to find the hardware for a device ID.

  http://www.WikiHow.com/find-hardware-ID

• LMS 3.2 (solaris 10) - user tracking: once again "ogs_server_urn" not found! Errors

  LMS 3.2 on a solaris 10 server that had problems with ctm_config.txt in the past (https://supportforums.cisco.com/thread/2033941) now once again has problems with the device Selector in UT. There are FATAL errors of type it below connected to CampusOGSServer.log:

  [Tue 19 Oct 18:27:22 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
  [Tue 19 Oct 18:30:52 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server
  [Tue 19 Oct 18:33:03 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
  [Tue 19 Oct 18:35:04 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/Pre-deployed
  [Tue 19 Oct 18:35:05 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/User Defined groups

  To create failure I'm going to UT > reports > generator-online Switch Port report > Switch Port summary
  The switch of the device that opens contains all devices and clicking the search button produces the following error:

  Problem with file /WEB-INF/screens/deviceselector/DeviceFilter.jsp! URN_NOT_FOUND: urn 'ogs_server_urn': not found!

  also, the following error is located in /opt/CSCOpx/MDC/tomcat/logs/stdout.log:

  October 18, 2010 14:18:49 org.apache.catalina.core.ApplicationDispatcher invoke

  SERIOUS: Servlet.service () for servlet jsp threw exception

  com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND: urn 'ogs_server_urn': not found!

  at com.cisco.nm.xms.ctm.client.CTMCall.establishIPC(CTMCall.java:238)

  to com.cisco.nm.xms.ctm.client.CTMCall. (CTMCall.java:218)

  to com.cisco.nm.xms.ctm.client.CTMClientProxy. (CTMClientProxy.java:64)

  at com.cisco.nm.xms.ctm.client.CTMClientProxy.getProxy(CTMClientProxy.java:180)

  at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:179)

  at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:98)

  to com.cisco.nm.xms.ogs.client.OGSServerProxy. (OGSServerProxy.java:85)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getServerProxy(OGSRuleExpressionUtil.java:102)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClassDefUtil(OGSRuleExpressionUtil.java:123)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getInternalClasses(OGSRuleExpressionUtil.java:153)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClasses(OGSRuleExpressionUtil.java:174)

  at org.apache.jsp.WEB_002dINF.screens.deviceselector.DeviceFilter_jsp._jspService(DeviceFilter_jsp.java:158)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

  at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:594)

  at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:506)

  at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:966)

  at org.apache.jasper.runtime.PageContextImpl.include(PageContextImpl.java:614)

  at com.cisco.nm.uii.taglib.framework.ContentAreaTag.doStartTag(ContentAreaTag.java:76)

  at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspx_meth_embu_contentarea_0(popup_jsp.java:876)

  at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspService(popup_jsp.java:693)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

  at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:470)

  at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:405)

  at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)

  at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)

  at com.cisco.nm.uii.UIIController.processActionForward(UIIController.java:380)

  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)

  at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)

  at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:199)

  at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:282)

  at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:754)

  at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:684)

  to org.apache.jk.common.ChannelSocket$ SocketConnection.runIt (ChannelSocket.java:876)

  to org.apache.tomcat.util.threads.ThreadPool$ ControlRunnable.run (ThreadPool.java:684)

  at java.lang.Thread.run(Thread.java:595)

  I checked the file ctm_config.txt in the directory campus and cmapps, removed the files ctmregistry and ctmregistry.backup from/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib, deleted all files and directories below/opt/CSCOpx/MDC/tomcat/work/Standalone/localhost/and restart the services.
  No change...

  What I noticed by looking directly in the database of the CMF is that "CampusOgsGroupCacheTable" is completely empty where the following tables contain data:
  CampusOgsGroupPropertiesTable
  CampusOGSTagTable
  CampusUserGroupAssociationTable

  What could be the reason for this behavior?

  I still thought of the option to export all groups of CMF (or at least groups of campus) and delete all tables of OGS and re-import the groups but when I try to do it I get the following error:

  [email protected] / * /-server #. / perl./OGSCli.sh u admin
  Enter the password for the CiscoWorks:
  Authentication succeeded.
  INFO: Type EXIT to exit from OGSCli guest at any time.
  Enter a task OGSCli [export]: export
  Enter a filename of export groups:./OGSGroupExport.info
  WARN: The details of the group in the selected file will be replaced by new groups of export information. Do you want to continue? (y/n) [n]: y
  Enter a name of group hierarchy defined by the user to export or the full export of all groups defined by the user of all of the applications [all]: all the
  INFO: Hierarchies of groups defined by the user in all the applications that are installed in all servers, will be exported to. / OGSGroupExport.info.
  Authorization succeeded.
  ERROR: Could not export the specified groups, user-defined hierarchies in. / OGSGroupExport.info.
  ERROR: This could be due to one or more of the following reasons:
  ERROR: * OGSServer process may not work
  ERROR: * remote server consolidation or Application may not be accessible
  ERROR: * lack perhaps of free disk space
  ERROR: * you do not have the required file permissions to create the file.
  ERROR: See /var/adm/CSCOpx/log/CMFOGSClient.log for more details.
  [email protected] / * /-server #. / perl./OGSCli.sh u admin d
  Enter the password for the CiscoWorks:
  Authentication failed.
  Check the username and password you entered.
  [email protected] / * /-server #.

  just to be sure, I download the 2 files ctm_config.txt...

  Instead of setting DYNAMIC_PORT_ALLOCATION = 0, replace perms on both ctm_config.txt 0444 files, use the original port and see if UT works.  If so, run in this configuration for some time see if corruption returns.  It should not since casuser won't be able to write to the file.

• 6400 upgrade Hard Drive just SHRUNK... Once again!!!

  First of all let me state that I am ready to throw my computer and TWO 2, TWO Yes upgrade hard drives out of my 2nd floor window!

  OK, my wind is done, for now.

  I have an Inspiron 6400 with HDD 80 GB of origin (73.1 GB space.)  I wanted to go to a Western Digital 250 GB hard drive.  I bought the drive and cloned it.  My first attempt was a purchase Norton Ghost program (after the $150 for the reader, that's another $50 for the program) I cloned it from the laptop via a USB - SATA connection.  Everything seemed fine, until I swapped hard drives.  He got through the BIOS, no problem, then started to windows.  Immediately, it projected blue and that was that.  Swap return original hard drive, everything OK.  Put old drive in the spare computer/SATA slot and realized that the reader shrunk to 73.1 GB. . the SAME SIZE as the original drive.

  After days/weeks and literally probably 5 to 6 hours of troubleshooting, downloading about 4-5 programs, utilities, etc, and have EVERY single utility, test and program otherwise tell me the car was very good (less the fact that he was now 170 GB smaller) I thought that drive was simply bad then returned.  (After fighting with Tiger Direct, I had to return it directly to WD, but they at least sent me a replacement unit before that I had to return the first...  (where my 'two' drives))

  So I have the new, 2nd hard drive in hand and I say to myself that I would be the clone differently, from my desktop (Dell 690) who had a few ports SATA spare on it.  I cloned it with a different program and once again, everything seems to be okay.  It showed in my office.  This time, I've set manually the new disk partitions to what I end up with.)

  So I put the new, larger, cloned drive in the computer, booted and BAAM!  Exactly the same thing.  Blue screen stop...  And guess what... The drive is now 73.1 GB. . and once more, there is nothing I can do to bring back to 250 GB... any computer, software, utility, etc. I throw at it or throw it out in...

  Back to Western Digital... but this time, I don't know yet what to say or how to proceed.

  My questions are:

  1. What is happening and why I can't get a 250 GB drive in the machine.  (I can't find ANYWHERE a maximum limit of hard drive)

  2. any thoughts on how to get my drive to the correct size of declaration?

  I'm really steam it... I have never spent so much time on what should be a simple question in my 15 years and more and about 20 + systems of computers through my hands...

  Thanks in advance

  Blake

  Message edited by blakemiller 27/03/2008 17:05
  
  

• the blocked sites listed in options disappear when the browser is closed. have to list them all once again, if I want to disturb.

  Listed in a short list of sites from where I want Firefox blocks cookies (doubleclick, for example), following the instructions on https://support.mozilla.com/en-US/kb/Enabling%20and%20disabling%20cookies. However, when I close the browser, the next time I open it, the list is empty. Of course, I get cookies from the sites I want to block.

  Hello

  You may need to disable the Preferences of Site in (Alt + T) Tools > Options > Privacy > settings. Please also see that.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• State Bar has disappeared, once again (November 9, 2011)

  After a few updates, today disappeared from my status bar, once again, and I can't understand how to get it back. I had status-4-Ever forever, but it's been so long that it happened that I'm not sure what to do. I messed around with it several times and restarted Firefox, but it is not it.

  "Ctr /" is the shortcut to activate the module bar, and it's the same as the view > toolbars > (check | uncheck) the module bar.

• I have a 6 and when I said an iMessage that he will tell me when the person read it then it will say delivered once again so I don't know when it was read

  I have a 6 more and when I send an iMessage he tells me when the person read it then it will say delivered once again so I don't know when it was read

  I have exactly the same problem since I updated to 9.3, the 9.3.1 update didn't fix either. Apple support think it could be a software problem or operations and I have tried literally everything! Have you found a solution for this yet?