M50-192: screenshots does not to the bottom of the screen

Similar Questions

• Games running in lower resolution on the desktop resolution does not fill the screen

  I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
  
  In order to solve this problem, I tried the following steps:
  
  I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
  
  Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
  
  After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
  
  After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
  
  Thank you.

  Solution (I hope)

  1. choose the properties of the graphic (logo Intel) option when you right click on the desktop

  2. go in view

  3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)

  4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)

  5. Repeat until you get back to the higher resolution (that won't let you change the scale).

  6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.

  I had a problem with some resoultions changing the way they were, but which should solve most of the problems.

• When a tab is opened, it does not overlap the screen im on.

  So when I like to open another tab when I click a button, it does not overlap the screen, I'm on and if I click it, nothing happens, so I have to minimize and press tab to open it and when I click on the tab I am the last, it works fine but the other tab is not.

  It seems that your browser runs slowly due to lack of memory (why a new loading tab so seems to freeze and can be thawed by minimize and maximize). This explains also why you can change to the previous tab, but not others; the last tab you used is still in main memory, while the other tabs should return loaded into main memory when you change their (as other data takes the place of the main memory).

  So I suggest you try to restart Firefox (as some may have memory leaks) and closing other applications you have open (use the Task Manager to help if they are slow to respond). If you're still having problems, try closing using the tabs/windows less.

  If you still have the problem, then you should try reinstalling Firefox (see uninstallation and installation).

• my information does not match the screen. I have to scroll sideways and vertically for all to see

  my information does not match the screen.  I have to scroll sideways and vertically for all to see

  How can I change the size if it is adapted to the screen?

  Hi Marilyndunn,

  ·         are what application you referring?

  ·         It occurs on all applications?

  ·         If it works well before?

  ·         Did you do changes on the computer before the show?

  You can see the following article for more information about the display settings.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  Make the computer easier to see (optimize visual display)

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-computer-easier-to-see-optimize-visual-display

  Hope this information helps.

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• I can do a vertical photo which does not meet the screen

  Is it possible to blur the edges or the bottom when you have a vertical photo that does not cover the full screen? I need suggestions on what to do, so do not always see the black screen. I know that I can put a background behind it, but according to me, the edges of the image are so distinct in this way.

  What seems to have become the default behavior, at least on American television, when it is necessary to introduce video portrait of the TV, is put the image under the vertical of the image, it fits the bottom until it fills the screen and maybe more, then a little blur to hide the pixellation, and finally to darken it, based on the original content.

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• Equium M50-164: IE does not display the pages correctly

  I have a new Toshiba Equium M50-164, but it does not correctly display the my internet page at http://myweb.tiscali.co.uk/lorne.anderson/Bridge/

  It should look like this:
  http://myWeb.tiscali.co.UK/Lorne.Anderson/NormalView.gif
  with the bridge in the header, but on my Toshiba anaylser logo, it looks like this:
  http://myWeb.tiscali.co.UK/Lorne.Anderson/ToshibaView.gif

  I have 4 other computers all display correctly (under XP, 2000, 98SE) and several of his friends say they can see OK. If I look at the HTML unlying by right click and view source in IE the fuse that displays the logo should read:
  "align ="left">".

  
  
  
  
  
  
  "
  but on the Toshiba, view poster source:
  "align ="left">".

  
  
  
  
  
  
  "
  Note the blank line 2 where the code to display the logo should be. If I open the page of the files on my hard drive it is displayed correctly so my guess is that Toshiba have done something to the security IE by default overide settings but I do not see what. How can I get IE on my Toshiba to work how Microsoft has designed to work?

  Just like a check, anyone who uses this forum can read the page correctly, or you also get the missing logo?

  Hello

  Is this single page where you have this problem? Have you tried to open it with another browser?

  Try to install the latest updates. Perhaps the problem will be solved.

• Firefox does not fill the screen

  Hello

  Yesterday I had Firefox and explore (ugh!) browsers open at the same time, as I just changed my site on Yahoo Small Business Solutions and Firefox would not save the changes (as a result, the opening of Explorer.) After I finished with the Web site changes, I noticed that there are some changes on my page of Firefox. It does not fit my screen by about 1/4 "on the sides and bottom, and the top is not complete as if it was - the office's bleeding through in empty space up there. Help, please! Thanks, Qz

  Open Firefox-> click the maximize button to fill the screen completely-> close Firefox

  • Restart Firefox
  • Now, the window should open maximized

  Check and tell if its working.

• DVD burned in first pro cc does not fill the screen. Desire a 4:3 aspect ratio

  I use first pro cc. I burned a dvd several times, trying different presets. Every time the dvd never fills the screen. It does not lool like box (16 x 9) letters. There is space around the photo / video. Need quick assistance, project is already late. Thanks in advance.

  Theo Smith

  Have you used one of the mpeg-2 DVD presets?

  Which one?

  MPE or Premiere Pro?

  Please show a screenshot of your output settings.

• MacBook Pro does not start, the screen is pixelated.

  MacBook Pro (2011) running iOS later.

  Screen went blue, at which time mac was turned off.  Try to be able to save and mac does not start.

  Tried to boot using utilities, but can not access this screen.  (the screen is also all the "pixelated".)

  Looking for ideas before making a trip to the Apple store.

  1 disconnect all devices (Ethernet, USB, external hard drives, mouse)

  2. start in safe mode

  3. go Finder - press Option-Go - ~/Library/ /DiagnosticReports ofnewspapers

  4. find the missing table inception report and post it please

  If your Mac will not turn on - Apple Support

• Laptop does not start the screen to the top/black/blue

  Laptop will not start. HP Elite Book 250. Doesn't boot. Tried start run but says departure until a failed. Help, please.

  Hello Everlast87,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

  This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Since it a commercial product, you should post your question on the card for laptop of HP Enterprise Forumsfor more information.

  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!

  Mario

• Spectrum X 360: New spectrum X 360 does not turn the screen into tablet mode

  My spectrum is only two weeks old and works wonderfully as a standard notebook computer.

  However, I cannot get screen to turn when I select tablet mode or Flip on the stand of entertainment.

  All the research online, I can find are people who used Win 8.1 and is updated to Win 10.

  Mine came with Win 10 pre-installed.

  None of the screens settings they advise to go to exist.

  I also checked the registry and its game properly.

  Windows 10 made the anniversary update a few days in me starts to use it so I don't know WHETHER or not the rotation number was there from the beginning.

  I solved my problem re. the screen does not turn in tablet mode.

  Yesterday, I installed HP Support Assistant in the hope, he suggests a solution.

  It didn't at the time, but it made me on this forum where I see that many others had similar problems.

  Today, when I turned on my laptop I noticed that support Assistant has a list of available updates.

  the first who has updated automatically has been updated for HP Notebook System Bios (Intel processors) which, after installation and reboot I had not really noticed any difference.

  Among the list of updates has been 'Intel Integrated Sensor Solution Drivers'

  Because I couldn't find any menition of sensors in my device manager, I installed it.

  Now I have the "Lock Rotation of this view" option may be greyed out there but at least now it.

  Still no spin so I started to double check every thing once again and found that I had a new entry in the registry... Sensor

  present.

  However Enable is set to 0 instead of 1

  

  I changed the 0 to 1 and here I rotation.

  However the only question now is the Rotation options buttons are greyed out, but I still can auto rotate when I flip to the tent, entatainment or tablet mode.

  At least, that my X 360 so that its name and what I bought it for.

  Fact my research I love the lack of rotation is not a specific HP problem but a problem of Windows 10.

  If other problems persist, try to reduce your search settings to fail to win 10 to rotaate, you will see a lot more information out there.

  Thanks to everyone who tried to help me. I hope that my message will help someone else.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Program BACK in Guest XP on Windows 7 does not fill the screen

  Hello world

  I have a quite unique due to many circumstances situation and several months of research to get to a decent workaround.

  I have a tool written in Basic for MS-DOS. I need to use this tool and the interface with the files created in Windows 7. VMWare Player with no very good support for sharing files between DOS with Windows 7 clients, I have opted for a guest of Windows XP on my computer Windows 7 host and who go through the program. In this way, I can share files between XP and 7 and run the program correctly in the XP VM. Note that this program doesn't work at all on Windows 7 due to some problems graphics driver, hence the need for such a solution.

  When I run the XP VM, it is able to match the resolution as expected. However, when I open the program BACK, he is not full screen as it does on a native XP machine or even a VM XP in VMWare Fusion on a Mac. Is there a way to force it to fill the screen? The graphics full screen are vital for visibility - I can barely see anything on the screen of dinky little 640 x 480 without blowing up to its maximum potential.

  I tried several other options, including a Windows VM (I'm under Windows 7 Enterprise) and DOSBOX. Windows VM has the same problem resolution in addition to requiring the integration of features enabled to share files and requiring the same integration disabled features in order to run the program and the DOSBOX not full screen but the performance is much too slow to be practical (it is similar to take 2 minutes to scroll through a web page that is several pages a notch long) even at maximum settings.

  Please no suggestions ' do you have the printer "-I am part of a team of average size on how it works and it's pretty much the last roadblock after several months of work. We probably tried everything which is immediately obvious, including the recompilation of the source code for the program BACK (that we had to do anyway to remove a lock imposed by a society that no longer exists).

  The closest that I have is to reduce the resolution of the host Windows 7 in 800 x 600, which makes the VM a bit larger but still not quite full screen. I try to activate the VGA 640 x 480 mode, I guess? Even in this case, however, the need for constantly changing screen resolutions makes this solution less than ideal.

  Thank you for all the suggestions/help.

  Do I understand correctly:

  -It is an application with a fixed resolution of 640 x 480 fullscreen

  -You want that he developed the scale to fit to your screen

  As far as I KNOW, VMware Player is not just what to do.

  There is a tutorial in the section documents for a workaround (using the changer display to automatically change the resolution of the host).