M50-244 XP Pro installation

Similar Questions

• Equium M50-244 - SM Bus controller - all drivers available?

  Laptop bought with XP Home, but has been modified to work with XP Professional.
  Pulled the bottom of all the drivers, I could find on the site Tosh, but in the Device Manager in the section other devices SM Bus controller is marked with a? and an exclamation point.
  Any suggestion where I could find this driver (s).

  This part of the chipset? or is it another device?

  Hello

  Equium M50-244 has a part number PSM59E-xxx.
  In this case you must use the correct driver.
  On the Toshiba page you will also find a statement of installation how to install the drivers.
  You must follow this guideline.

  PS: Just FYI XP pro uses the same drivers as XP home

• Equium M50-244: loop problem internal ati2dvag.dll

  I had a M50-244 XP Home Edition (sp2) who have ATI onboard until I uninstalled it completely. The laptop has become totally useless vomit ati2dvag.dll inner loop problem and nothing seemed to heal so I decided to completely get rid of ATI.

  It started with VGASAVE which, with a few adjustments, work is fine and so my machine now. I disabled the video as controller he kept coming up with "new hardware found" and I didn't load the drivers more who would do what he started crashing again.

  Currently its on 'test' and I'm doing everything possible to see if it will crash once again, I hope not.

  Maybe I need another driver and activate the video controller, but I am hated for doing anything more now that his works normally, finally!

  Some said the installation of the graphics driver on the site omegadrivers.net and improves the performance of the graphics card.
  Maybe an installation of the driver from the site could be useful.

  Check it out

• Need Driver USB for Equium M50-244

  I installed Win XP Pro on my M50-244, but whenever I plug a data stick in the USB port, I get a message about the connection USB could be faster with USB 2 blah blah.
  Under the control panel the controller USB has a yellow question mark on it. Can someone tell me please where to find the USB driver that is appropriate for it?

  See you soon

  The laptop uses the standard Microsoft Windows USB driver. On the Toshiba page you will find all the special USB drivers for WinXP.
  Have you used the recovery CD or did you install the OS of Microsoft CD?
  Possibly, you have not installed the chipset driver?

• Utility Toshiba HWSetup on my Equium M50-244

  Hello

  I would like to run Toshiba HWSetup utility on my Equium M50-244, but it doesn't recognize anything - bios version, or anything else.

  How can I proceed to run?

  Thanks in advance!

  Kind regards
  Plamen

  Hello

  I m wondering what system do you use?
  The Toshiba UE driver page provides tools Equium M50 BOF Win XP only
  The hardware configuration of v1.35.0.4C for Win XP is available on the page, and I assume you are talking about this software? Right?

• Equium M50-244 has bluescreens and password requested

  Hi all
  I need your help here please, my wife Equium M50-244 just froze after 15 min. I thought out the battery could solve the problem, only now when you turn on the laptop I get blue screen and a request for password that was not supplied with the computer.

  Can anyone help before she beat the life out of me (great she´s).

  Hi friend

  I hope that you´re still alive and your wife didn t just have you beat :)

  Please give more information about your problem. It seemed the first time? And what operating system you have? Have you recently updated some drivers or installed new hardware?

  And no matter what, with this password? I mean that a password does not seem fair to nowhere! Where is this password? BIOS or Windows?

  Man, give a few specific questions with plenty of information, so people here can help you.

  Welcome them

• WEP encryption key do not forget when you restart the Equium M50-244

  I use a laptop Equium M50-244, with a BT Home Hub 7838 wireless router. Almost everytime I turn on the laptop it has no wireless connection. So I have to go to control panel, network connections and that he can find a new connection.

  I would then type the key to encryption WEP number twice to get a new connection.
  This is obviously a long procedure, so I need to get the laptop to recognize the encryption key and save it for the next time I turn on.

  I am running Windows XP Home Edition with Service Pack 2 and a Norton Anti Virus and Firewall.

  Any help would be appreciated

  Peter

  Hello

  I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.

  Anyway: try to Setup WLAN to use Windows settings and set WEP password we remind for your WLAN. I have the set up on a lot of laptops different and after choosing the publicly traded WLAN password has already been set and the only thing that must be done is to click on the Connect button.

• Equium M50-244 does not not to wake up on LAN

  A notebook Equium M50-244 does not meet the magic packet WOL.

  The BIOS settings are correct and show adapter LAN ENABLED, Wake on LAN: ENABLED.

  The sticker on the laptop and the original box gives a different MAC address to know what the device itself (ifconfig or lshw). No matter, the laptop does not account the magic packets for two MAC addresses.

  Using Wireshark, I see that the WOL packets are certainly diffuse with properly formatted MAC addresses.

  My thought is now that it is a BIOS problem but I can't find the right bios for this machine.

  What would be the best bios match? Keep in mind this box is Linux.

  Thanks in advance for any help.

  See you soon

  Nick

  Hello

  Have you checked if the WOL is enabled in the network card settings?
  Do you know how to check this?

  Go to the Device Manager, expand network adapter s and mark LAN card.
  Then, go to the properties of the network adapter and check the Advanced tab.

  There are a lot of different settings and a configuration option must refer to the WOL.

• BSOD on Equium M50-244 - error caused by ati2dvag.dll

  Operating system Windows XP SP2, view ATI Radeon xpress 200 m series.

  Hi have an Equium M50-244 with a problem. Seems to work very well, but suddenly goes to a blue screen with the message:
  A problem has been detected, has been shut down to prevent damage.
  The problem seems to be caused by following file ati2dvag.dll
  If this is the first time you've seen this stop screen restart your computer if this screen appears again these steps
  The device driver got stuck in an infinite loop, it usually indicates a problem with the device itself or with the incorrect programming hardware device driver.
  Please check with your hardware device vendor updates the driver.
  STOP: 0X000000EA, 0 84190600, 0XF7983CB4, 0 X 1 0000000 X

  ati2dvag
  beginning physical memory dump

  Have tried to update the drivers of Toshiba, ATI and omega, it makes no difference.
  Of course, there might be a flaw with chipset but diagnosis identifies any problems. If I run windows in safe mode display is ok.

  Other forums seem to report a similar problem with this model and the ATI chipset, but no one seems to have a solution. Can anyone help?

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16605

  By the way: the Internet is full of these discussions, but the fact is that to happen on different desktops and laptops. It has nothing to do with the model of YOUR laptop directly.

• Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40?

  Hi all

  Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40? It has an Intel Celeron M 1.4 GHz processor

  Cheers, Lee

  Hello

  Just for info - http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  Good bye

• Equium M50-244 cannot be started!

  Hello

  My boyfriend's son recently received a toshiba satellite m50-244, we will get into trouble this weekend. The main problem is that it's very picky... it starts for a while, then it's going to and then the screen does not display anything, or it will appear, then plant and turn off again through a blue screen.

  I found a thread in the knowledge base on the bios update I put on a USB flash drive and use it as soon as I can get the miserable thing to stay long enough. Is there anything else we could do, or should we just give up and take it back to the shop of Toshiba?

  Thanks in advance, hanrg.

  Hi Hannah

  Seems the laptop is not old and the warranty is valid.
  Please contact the maintainer authorized Toshiba in your country!
  Guys have more experience than the common laptop computer user like me and you.

  PS: One of my friends had a similar problem and it was related to the CPU socket.

• Equium M50-244: Question about upgrade memory and Wlan card

  I have a model Equium M50-244. What type of network adapter I need to fit a Wi - Fi connection on my hub (BT)?
  Also, I currently have 512 MB of ram installed. Can I increase this?

  Hi cora,

  Of course, you can improve the memory to a higher value.
  This book must support 2 slots of memory and it should be possible to increase memory for max 2048 MB. In this case, you can use 2 x 1024Mo module.

  I also found information that this laptop will accept this module:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  I put t know if you've experienced the site options & Accessories Toshiba, but if not then visit this:
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP

  You will find more compatible parts.

• Equium M50-244: what improvements are possible and the value to do?

  Hi all, I just got an EQUIUM M50-244, I got it yesterday from pc world and im well please with it!
  but I was wondering if there is any update worth it? is it possible the cpu clock? I'm looking for more memory, is there a limit to what I can adapt? is also a bigger hard drive possible? anything else that is worth please let me know

  Thank you, your friendly local snake

  Hello

  General it s not possible to upgrade the processor or the graphics card, but you can upgrade the memory and the HARD drive on this laptop.
  You can upgrade the maximum memory 2048 MB of memory (2x1024Mo) and you can use a with the 80 GB HARD drive may also 100 GB.

  Support memory modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  Hope I could help.

• I try to recover my system using the xp pro installation disc get message that the version on the computer is newer tha the version on the cd

  I try to recover my system using the xp pro installation disc get message that the version on the computer is newer tha the version on the cd

  You have probably updated to SP-1 and SP - 2 maybe since then and the CD is without both.

  You try to restore the system from the cd, or re - install the OS from it?

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/