Equium M50-244 has bluescreens and password requested

Similar Questions

• Equium M50-244 - SM Bus controller - all drivers available?

  Laptop bought with XP Home, but has been modified to work with XP Professional.
  Pulled the bottom of all the drivers, I could find on the site Tosh, but in the Device Manager in the section other devices SM Bus controller is marked with a? and an exclamation point.
  Any suggestion where I could find this driver (s).

  This part of the chipset? or is it another device?

  Hello

  Equium M50-244 has a part number PSM59E-xxx.
  In this case you must use the correct driver.
  On the Toshiba page you will also find a statement of installation how to install the drivers.
  You must follow this guideline.

  PS: Just FYI XP pro uses the same drivers as XP home

• Equium M50-244: Question about upgrade memory and Wlan card

  I have a model Equium M50-244. What type of network adapter I need to fit a Wi - Fi connection on my hub (BT)?
  Also, I currently have 512 MB of ram installed. Can I increase this?

  Hi cora,

  Of course, you can improve the memory to a higher value.
  This book must support 2 slots of memory and it should be possible to increase memory for max 2048 MB. In this case, you can use 2 x 1024Mo module.

  I also found information that this laptop will accept this module:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  I put t know if you've experienced the site options & Accessories Toshiba, but if not then visit this:
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP

  You will find more compatible parts.

• Equium M50-244: what improvements are possible and the value to do?

  Hi all, I just got an EQUIUM M50-244, I got it yesterday from pc world and im well please with it!
  but I was wondering if there is any update worth it? is it possible the cpu clock? I'm looking for more memory, is there a limit to what I can adapt? is also a bigger hard drive possible? anything else that is worth please let me know

  Thank you, your friendly local snake

  Hello

  General it s not possible to upgrade the processor or the graphics card, but you can upgrade the memory and the HARD drive on this laptop.
  You can upgrade the maximum memory 2048 MB of memory (2x1024Mo) and you can use a with the 80 GB HARD drive may also 100 GB.

  Support memory modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  Hope I could help.

• WEP encryption key do not forget when you restart the Equium M50-244

  I use a laptop Equium M50-244, with a BT Home Hub 7838 wireless router. Almost everytime I turn on the laptop it has no wireless connection. So I have to go to control panel, network connections and that he can find a new connection.

  I would then type the key to encryption WEP number twice to get a new connection.
  This is obviously a long procedure, so I need to get the laptop to recognize the encryption key and save it for the next time I turn on.

  I am running Windows XP Home Edition with Service Pack 2 and a Norton Anti Virus and Firewall.

  Any help would be appreciated

  Peter

  Hello

  I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.

  Anyway: try to Setup WLAN to use Windows settings and set WEP password we remind for your WLAN. I have the set up on a lot of laptops different and after choosing the publicly traded WLAN password has already been set and the only thing that must be done is to click on the Connect button.

• BSOD on Equium M50-244 - error caused by ati2dvag.dll

  Operating system Windows XP SP2, view ATI Radeon xpress 200 m series.

  Hi have an Equium M50-244 with a problem. Seems to work very well, but suddenly goes to a blue screen with the message:
  A problem has been detected, has been shut down to prevent damage.
  The problem seems to be caused by following file ati2dvag.dll
  If this is the first time you've seen this stop screen restart your computer if this screen appears again these steps
  The device driver got stuck in an infinite loop, it usually indicates a problem with the device itself or with the incorrect programming hardware device driver.
  Please check with your hardware device vendor updates the driver.
  STOP: 0X000000EA, 0 84190600, 0XF7983CB4, 0 X 1 0000000 X

  ati2dvag
  beginning physical memory dump

  Have tried to update the drivers of Toshiba, ATI and omega, it makes no difference.
  Of course, there might be a flaw with chipset but diagnosis identifies any problems. If I run windows in safe mode display is ok.

  Other forums seem to report a similar problem with this model and the ATI chipset, but no one seems to have a solution. Can anyone help?

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16605

  By the way: the Internet is full of these discussions, but the fact is that to happen on different desktops and laptops. It has nothing to do with the model of YOUR laptop directly.

• Utility Toshiba HWSetup on my Equium M50-244

  Hello

  I would like to run Toshiba HWSetup utility on my Equium M50-244, but it doesn't recognize anything - bios version, or anything else.

  How can I proceed to run?

  Thanks in advance!

  Kind regards
  Plamen

  Hello

  I m wondering what system do you use?
  The Toshiba UE driver page provides tools Equium M50 BOF Win XP only
  The hardware configuration of v1.35.0.4C for Win XP is available on the page, and I assume you are talking about this software? Right?

• Equium M50-244 does not not to wake up on LAN

  A notebook Equium M50-244 does not meet the magic packet WOL.

  The BIOS settings are correct and show adapter LAN ENABLED, Wake on LAN: ENABLED.

  The sticker on the laptop and the original box gives a different MAC address to know what the device itself (ifconfig or lshw). No matter, the laptop does not account the magic packets for two MAC addresses.

  Using Wireshark, I see that the WOL packets are certainly diffuse with properly formatted MAC addresses.

  My thought is now that it is a BIOS problem but I can't find the right bios for this machine.

  What would be the best bios match? Keep in mind this box is Linux.

  Thanks in advance for any help.

  See you soon

  Nick

  Hello

  Have you checked if the WOL is enabled in the network card settings?
  Do you know how to check this?

  Go to the Device Manager, expand network adapter s and mark LAN card.
  Then, go to the properties of the network adapter and check the Advanced tab.

  There are a lot of different settings and a configuration option must refer to the WOL.

• Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40?

  Hi all

  Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40? It has an Intel Celeron M 1.4 GHz processor

  Cheers, Lee

  Hello

  Just for info - http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  Good bye

• Equium M50-244: loop problem internal ati2dvag.dll

  I had a M50-244 XP Home Edition (sp2) who have ATI onboard until I uninstalled it completely. The laptop has become totally useless vomit ati2dvag.dll inner loop problem and nothing seemed to heal so I decided to completely get rid of ATI.

  It started with VGASAVE which, with a few adjustments, work is fine and so my machine now. I disabled the video as controller he kept coming up with "new hardware found" and I didn't load the drivers more who would do what he started crashing again.

  Currently its on 'test' and I'm doing everything possible to see if it will crash once again, I hope not.

  Maybe I need another driver and activate the video controller, but I am hated for doing anything more now that his works normally, finally!

  Some said the installation of the graphics driver on the site omegadrivers.net and improves the performance of the graphics card.
  Maybe an installation of the driver from the site could be useful.

  Check it out

• Win 7 Pro - make a name of user and password request when accessing to the server computer in the workgroup. Credentials, then considered non valid.

  Recently bought a Dell Dimension 3847 with Windows 7 Pro to replace a workstation that is connected to a network that uses Windows Server 2003. I already set up two other PC's (not same model) with Win 7 Pro, for existing users and had no problems whatsoever. The user of this workstation is an existing one (implemented as an administrator).  I've set up his account and she joined the working group. The other computers in the workgroup are listed under network location. However, when I tried to access the server computer in the Working Group, I got a pop-up window asking for a username and password. This would not have taken place. However, I entered the username and password for that particular user and received a message that the user name and password were not valid. I set up my user account (it has administrative privileges too), on this computer, joined the Working Group, Windows recognizes the other computers in the workgroup, but when I tried to access the server computer I got the same pop-up and had the same problem with my credentials not being recognized. While remaining under my user name, I tried and then access the server computer again but when I arrived at the prompt for the user name and password, I used the 'Administrator' user name with the appropriate password (the credentials used to connect to the server computer) and it worked. I registered to the account of the other user and used the same method to access the server and it worked as well. Any ideas why the user credentials, other than the administrator account, are not recognized?

  Hello

  Sorry for the late reply.

  This problem is better suited in the TechNet forum where we have experts working on the same topic.

  Please post your request in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this information helps, get back to us if you need help with Windows.

  Thank you.

• Equium M50-244 cannot be started!

  Hello

  My boyfriend's son recently received a toshiba satellite m50-244, we will get into trouble this weekend. The main problem is that it's very picky... it starts for a while, then it's going to and then the screen does not display anything, or it will appear, then plant and turn off again through a blue screen.

  I found a thread in the knowledge base on the bios update I put on a USB flash drive and use it as soon as I can get the miserable thing to stay long enough. Is there anything else we could do, or should we just give up and take it back to the shop of Toshiba?

  Thanks in advance, hanrg.

  Hi Hannah

  Seems the laptop is not old and the warranty is valid.
  Please contact the maintainer authorized Toshiba in your country!
  Guys have more experience than the common laptop computer user like me and you.

  PS: One of my friends had a similar problem and it was related to the CPU socket.

• Need Driver USB for Equium M50-244

  I installed Win XP Pro on my M50-244, but whenever I plug a data stick in the USB port, I get a message about the connection USB could be faster with USB 2 blah blah.
  Under the control panel the controller USB has a yellow question mark on it. Can someone tell me please where to find the USB driver that is appropriate for it?

  See you soon

  The laptop uses the standard Microsoft Windows USB driver. On the Toshiba page you will find all the special USB drivers for WinXP.
  Have you used the recovery CD or did you install the OS of Microsoft CD?
  Possibly, you have not installed the chipset driver?

• Equium M50-163 has sound-> ongoing echo problems

  As the title says, my Toshiba laptop has some problems with the sound. For almost a good 7 months now (I think that I got used to the sound, I hear an echo ' ') my laptop sound, that it either music or speaking in a film, has a permanent 'echo' (as if the sound was the mode of the room).
  There is also little or no bass. I tried to adjust the sound settings, but nothing helped, and it isn't the laptop speakers because the sound is the same with external speakers connected to my laptop.

  Can someone help me?

  Thank you very much

  Hello

  You have this echo effect only to watch movies or have you noticed that play games or streaming a video from the internet?

  From my experience of that many different 3rd party applications supported additional sound effects. These settings might be responsible for you echo.

  I also remember that the M50 series supports the virtual sound software. This small program changes the sound effects too.

  Select this check box. You should find it in the folder utilities Toshiba.
  As far as I know, you can change the settings of the sound from the built-in speakers, headphones and external speakers
  Choose the parameters of built-in details, speakers and opens.

  There are a few options that could create the echo effect

  Good bye

• Equium M50: green screen fuzzy and all the white bits are pink color

  Hello

  wonder if someone might be able to help as I have no idea. I have an m50 laptop computer witch has a fuzzy green screen and all the white bits are pink color.
  Hope some body can help me because I'll be very grateful.

  Hello

  I agree with Richard. Please contact your dealer or an authorized partner Toshiba. The addresses that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true