M6-1105dx cannot detect the hard drive

Similar Questions

• Re: My laptop does not start, it cannot detect the hard drive

  I'm having the same problem but a bit different. I noticed that the support said to replace the hard drive and that's what I did with a disc Windows 8.1 and I took a step after test and see if my hard drive is not really usable. I put it in another computer that is also running Windows 8.1. It worked but my origianl computer still does not work, it says always "no drive detected". What the heck!

  think at this point, the best thing to do for you what we call. It is perhaps that the computer is a little less than a year and is still under warranty. Whatever the case, a technical support professional phone can certainly discuss your options with you.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

• Satellite L450 - 173 BIOS cannot detect the HARD whil eLinux disc that ubunto can

  I have a Satellite L450 173.
  The system will display a failure while trying to detect the hard drive then cannot boot from the hard drive.

  However, it can boot from the CD and install ubunto 11.04 (with barrier).
  However, after the success in the installation process, the system cannot start...
  Is this a Bios problem that require an update?

  Hello

  * Question: *.
  Either classified and recognized in the BIOS HARD drive?
  On the first page of the BIOS disk HARD should be listed with details such as the name and the size of the HARD drive.

  If his list, then you must run a HARD drive test. You could test the HARD drive by using a freeware tool called Drive Fitness Test.
  This tool is free and can be downloaded from different pages
  To do this, and if there is error, it means that your HARD drive is malfunctioning.

• Portege 3500 didn't detect the HARD drive in the BIOS

  Hi forum,

  I go out the HARD drive, when I stick to the rear; the BIOS didn't detect the HARD drive.
  How can I configure the HARD drive in the BIOS? The discs i/o isn't editable t option.

  I need urgent help...

  Thank you

  Try to access the BIOS and set the defaults. Don t forget to save the changes. ;)

  A friend of mine had a similar problem and the BIOS default settings has been the key.

  So check it out

• Satellite L40 - installation of XP cannot detected a HARD drive

  Hello

  I want to install windows XP SP2 on a L40 but boot with the XP CD, Windows Setup does not detect the hard drive.
  The hard drive is a SATA drive.

  Please wat could be the problem?

  Hello!

  It is really hard to read these questions...

  The solution is pretty simple: you need the SATA drivers. At the point where your HARD drive is running in AHCI mode and so you need drivers. On Intel chipsets, is the Intel Storage Manager.

  If you want to learn more on this subject, please search here in the forum. There are already a lot of discussions about this, and I have that could be useful for you:
  [http://aps2.toshiba-tro.de/kb0/TSB8602DB0001R01.htm]

  Good bye

• Acer gateway ne570 won't boot upward and I tried the bios and it always detects the hard drive

  I have an acer gateway ne570 and it does not start and I tried the bios and it always detects the hard drive but first boot priority is boot windows which is the only thing on the menu Manager startup options when you press on enter where the box "no boot device, press a key" comes after starting the laptop and when the gateway logo appears. I've had for over a year and the hard drive still works and my laptop didn't come with a recovery or recovery usb drive. And I also used the alt + f10 button that linked me right back to square "no boot device, press a key. Anyway, what should I do?

  you need a PC to use the tool of creation of the windows window.

  to boot from the CD or USB, press F12 on startup and choose the correct boot device.

• Satellite L305D S5895: Win 7 cannot find the HARD drive or cannot format the HARD drive on a clean install

  I have laptop Satellite L305D S5895 of the customer. It was delivered to me by the customer who tried to install Windows XP Pro, Vista and none would install.
  He said he tried all the CD that he had finally dropped on it and delivered it to me installation.

  When I got the score have been removed, so I tried to install Win 7 and when I do a custom install, I get an error indicating that the hard drive can not be formatted on disk 0 or it will give an error that no hard drives have been found.

  I have reset the bios default and no matter what I do, it won't format or find the hard drive. I was going to upgrade the bios, but the only way I found to upgrade the bios is once windows is installed.

  Everyone has ideas about this laptop so I can get a system installed. I checked the bios and there is no parameters for a sata, raid or IDE disk drive, so it seems that this version cannot be changed.

  Thanks for anyone who can help you.

  Rick

  Hello

  First of all it is an American notebook series.
  [Satellite L305D-S5895 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2144776& rpn = PSLC0U & modelFilter = L305D-S5895 & SelCategorie = 3 & selFamily = 1073768663]

  The laptop supports a processor AMD and ATI chipset.
  This means that the drivers SATA is part of the ATI graphics card driver.

  You must include the first SATA driver in order to install the Windows operating system.
  You could add the SATA driver for the Windows disk using software like nLite / vLite

  Welcome them

• Windows xp Setup cannot format the hard drive

  Original title: windows xp installation

  I had to change hard drives, I went to load my copy of microsoft windows xp and it tells me it cannot format the HDD how many times can we use the xp disc? Or whats wrong?

  Hi Joshua6495,

  What is the full error message that you receive?

  See the article below, which deals with a similar question

  During installation, you are unable to format a Partition with a file Allocation Table Format

  http://support.Microsoft.com/kb/301340/

  You can use the Windows XP installation disc as many times as you want on the same computer

  Note: All programs on the computer and the data will be lost if you format the hard drive. It is recommended to make a backup of your data before performing any Installation of Windows.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The installation of XP Pro cannot find the hard drive

  The machine is running XP Pro 32-bit, and I am "upgrading" to 64-bit to work with AutoCAD.  When I boot on the 64-bit Setup installation CD can not find the hard drive and the demolitions.  The drive is already formatted to NTFS.

  You try to install on a SATA drive or your disks are on an add-in controller card and the Windows XP Installer x 64 doesn't have the required driver for the controller so it can't detect the drive.

  You have three options:

  1 - Use the F6 method to provide the installer for Windows XP x 64 mass storage drivers.  Drivers MUST be provided on a floppy disk, the Setup program will not accept the drivers from other media sources.

  2 - enter your CD of Windows XP x 64 drivers.  Note you will find reference to SP3 slipstreaming your Windows CD which you can install Windows on a SATA drive, but please note that Windows XP x 64 doesn't have a SP3, SP2 is the latest service pack for Windows XP x 64.

  3 (for the integrated SATA controllers) go into the BIOS and put the controller in IDE, most motherboard with SATA controllers mode on Board have an option to do this.  When mode IDE Windows XP Setup will see the drive and you will be able to install Windows.  Once Windows is installed, you will be able to install the SATA drivers from the installation of Windows XP operational.  You install the SATA drivers before changing the SATA mode controller in the BIOS, or when the Windows boot up upward a BSOD with a 0x7b error.

  John

• My system is unable to detect the hard drive.

  Original title: HDD not detectable

  Well, I l turned off my computer laptop and then heard some bad news, then I hit on the left side of it, angry and then he had a problem so I checked the BIOS and discovered that the disc HARD was undetectable and so now my laptop no longer starts. Here is a picture of what is shown on the screen

  Hi Robert,.

  Please contact Microsoft Community.

  I'm sorry to know that you are unable to boot your system as the hard drive is undetectable. I suggest you contact the manufacturer of your Dell system for additional help on this problem. As they should perhaps update your BIOS or make some changes in the settings.

  Reference: http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

  Hope this information helps. Please do not hesitate to contact us if you are having trouble using your Windows.

  Thank you.

• When you try to re - install Windows XP, it does not detect the hard drive.

  Hi all. I tired to do a reinstall of Windows XP today. It seems to take a lot of time, and then I did a very stupid thing. I turned off the laptop that I had to go. Now when I try to start the laptop on the cd, I get as far the screen where I have to press on enter to install Windows XP pro on the system or press R to repair. The problem is that there is now no facilities to choose from in the box below and the system is not recognizing the hard drive. I can't even as much as the screen to format the drive. When I press ENTER to install windows xp, then I get a blue screen telling me that the system shuts down to protect my pc. Is anyone able to tell me what to do to solve this problem please. Thank you very much in advance for your help. Noel

  original title: I did a stupid thing... Windows XP Pro

  Sounds like a hard drive problem then. Your drive is maybe defective. First of all, you can use the partition of diagnostic Dell (F12) for its determination.

  In case there is a SATA problem, press F2 to enter the BIOS and change the setting of hard disk SATA to legacy. (Might as well try this first.)

• WRT610N trouble: cannot share the HARD drive

  Hello!

  The problem is that I can't share HARD drive connected to my WRT610 via USB. The system continues to say "can not find the network address. I use XP with Service Pack 3. I tried all the instructions of the different forums (this statement too - http://www6.nohold.net/Cisco2/ukp.aspx?pid=10&login=1&app=search&vw=1&articleid=17419&donelr=1). I tried 2 different HDD-WD My passport Essential 500 GB and 2 TB of Seagate. Without success.

  HARD drive sharing is one of the main reasons why I chose this router. If it doesn't work, I have to buy a new one.

  I'll be happy to hear any suggestions at all.

  Thanks in advance.

  Reset of the router for 1 minute, power cycle the router and check again. Make sure you remove the HARD drive before resetting the router...

• I installed a new hard drive on my dell 1545, I bought preimum windows 7 64 bit and install it dosent detect the hard drive

  I broke my hard drive on my dell inspiron 1545, I bought a new 1 TB WD HDD and a new operating system windows 7 preimum 64 bit. I installed it

  He dosent see the hard drive, it says re seat the drive and it's in the rite. What should I do

  The hard drive is may be defective. Take it back to the store and get his change for a good...

• Portege M400 - Windows XP cannot find the hard drive

  Hello

  Ive got a Portege M400 who im looking to get a new one, I never had the Tablet XP CD so im trying to install using an XP Pro disk, but whenever I get no hard drive can be detected and I tried another disc of publishing house also.

  Ive looked for SCSI / SATA drivers but can only find RAID drivers which are not good for me.

  I hope someone can help me

  Thank you

  Hi wacksonjackson,

  Why these RAID drivers are not good for you? Windows XP requires RAID drivers if your laptop is RAID controller and there is no other choice to install XP from a normal Windows XP disc. Then download the RAID drivers on the official website of Toshiba. Either you create a new installation with the RAID drivers disc using nLite freeware tool or you copy the drivers on an external USB FDD and load them during the installation of XP.

  Also check similar topics here in the forum. You will find hundreds of similar topics on SATA and RAID drivers.

  Check this box!

• Equium - does not detect the HARD drive more

  I just got this Toshiba 1 TB HARD drive and it has worked well so far... it's the thing like that

  Computer detects something (no dolls just the standard plug and unplug a usb) and that's it. Cable is fine, it is in the rear port USB 2.0 into a witch, he has always been, without modifications have been made to the operating system (this is a computer storage without an internet connection).

  Any suggestions?
  Thanks in advance for you're time

  Hello

  Maybe you should post more details about it:

  -Exact cell model
  -Is an external HARD drive?
  -If Yes, what is the description of the exact model?

  However, you may try another USB cable. I had a similar problem and the reason was a faulty USB cable.