M7-1015dx: HP m7-1015dx and 64-bit Windows will not install

Similar Questions

• I installed Windows 7 64 bit and then some programs will not install the 64 - bit while telling me that I have a 32 bit OS. How can I make sure I have load a 64-bit version only when there is a choice?

  I have create a new PC and installed Windows & Pro 64-bit. While some offer programs install both 32-bit and 64-bit as a single installation and the installation of the program checks it should install. A few programs installed 32-bit when I said to use the 64-bit. I received a message that I had a 32 bit OS and that it could not install the 64-bit version. How can I ensure that the 64-bit version is always installed when it is available. I have a program that I need it's 32-bit however.

  I also installed Office 2010 and want to know how to check if it installed 32-bit or 64-bit.
  All this is because I'm about to build a new PC for my wife and want to avoid these problems right at the front with it.
  Thank you
  Doug

  If you buy a commercial version of win7 you are provided with the installation dvd of bit versions and a unique activation key. You cannot install both versions.

  Most of the programs will install without problem in a 64-bit version of victory, there is very little that will not be installed on Windows 64-bit.

  You install programs as usual, you don't need to change any settings or install to anywhere other than their default locations. -C' IE you do not manually select the x 86 folder or any other folder.

  If the program you are installing has the ability to install a specific version of bit, and it does not work, then the problem is that options program installers, you must contact the program support

  A retail version of Office 2010 also comes with two versions of ILO.

  Having a 64-bit version of victory does NOT mean that you need to install 64-bit Office, in fact MS recommends that stick you with 32-bit Office (reason being compatibility with various plug0ins Office)

  And of course the 32-bit version of win only supports 4 GB of memory

• 64-bit Vista will not install service pack 2

  I'm running the 64 bit version of vista buisness. I tried to install service pack 2 using the automatic update, but it has not installed. I also tried the manual download. He gets to halfway done installing, then gives me an error 0x800f081f code. He told me to install the system update readiness tool. I tried to install it, but that no longer works. Not even done a selective sartup with everything disabled except for windows services works.

  Hi relik_66,

  I suggest that you check your system for corrupted files.  You use the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, clickStart, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Program of 64-bit Windows 7 not install 32 - bit

  Original title:

  Windows 7 64 bit

  Hey everybody:

  I recently got new computer Windows 7 (64 bit) I need to install the prog. It wont let me because as TI (32-bit) prog.

  Yes I right-click, I am admin and Yes tried to install compatibility, run as.    Well can't seem to get anything to work.

  The program is very cool to replace him as (64-bit) Question is their a program that will install 32-bit?

  Thank you

  Jay

  It won't hurt to run in 32-bit mode. The software must not offer a mode 64-bit as well.

• Windows will not install kb982168 and kb982524, kb2418241, 2518864, kb2539631

  window xp home system these will let not install what can I do?

  This problem may be caused by a damaged .NET Framework component. Based on its current state, I would suggest trying the following troubleshooting steps.

  Step 1: Remove the .NET Framework using the removal tool

  ================================

  1. download the tool from the following link:

  http://CID-27e6a35d1a492af7.SkyDrive.live.com/self.aspx/Blog_Tools/dotnetfx_cleanup_tool.zip

  Please note: the third-party product discussed here is manufactured by a company independent of Microsoft. We make no warranty, implied or otherwise, regarding the performance or reliability of this product.

  2. save the zip (dotnetfx_cleanup_tool.zip) file from the link above on the local desktop and extract it.

  3. double-click on cleanup_tool.exe to run the tool.

  4. follow the instructions given.

  In the "cleaning product:", please select ".NET Framework - all versions.

  5. click on 'clearing '.

  After having removed the .NET Framework components, we will reinstall .NET Framework 3.5 Service Pack 1 and update.

  Step 2: Download and installation of Microsoft .NET Framework 3.5 manually

  =======================================================

  Please note: the size of Microsoft .NET Framework 3.5 and .NET Framework 3.5 Service Pack 1 is a little big. Your patience to download the update is much appreciated.

  1. click on the following link:

  Microsoft .NET Framework 3.5 and .NET Framework 3.5 Service Pack 1

  http://download.Microsoft.com/download/2/0/E/20E90413-712F-438C-988e-FDAA79A8AC3D/dotnetfx35.exe

  2. when the file download window appears, please click "Register" and follow the directions to save it to the desktop. After downloading the Setup file of Microsoft .NET Framework 3.5 on your desktop, double-click it to install it manually.

• I tried the procedure to treat the error 8007005 - I followed the steps with the subinacl. Download and return to zero from Notepad back - all pasted and copied correctly and always my windows will not update. Please tell me what to do!

  I followed the tips you posted - downloaded as it is stated and it still does not work

  Hi Dhirasantadasa,

  Thanks for posting on the Forum of answers.

  Try the location in the Microsoft Download Center and download and install it from there.

  If failure repeated, trying to get the update in Mode safe mode with network by following these steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  2. click on the Start button, click the arrow next to the button lock and then click restart.

  3. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  4. in the display Advanced Startup Options , use the arrow keys to select Safe Mode with network, press enter

  5 sign in your computer with a user account with administrator rights.

  Posted by Brian

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows KB2656370 update will not install. Does anyone have a solution for this? Every day, it tries to install and cannot. It will not install by using the Microsoft Update feature. Any ideas?

  There every time. I don't know even how to stop to try every day. Any help will be greatly appreciated. I'm not very computer savy, so I don't have much technical knowledge or programming.
  Thank you.

  Hello

  Have you tried to install the update manually (Standalone installation).
  Here is the link where in you can download the update and try to install.
  http://www.Microsoft.com/en-in/Download/details.aspx?ID=29364
  Let me know if it works for you.
  If this fails, download .NET clean tool.
  http://CID-27e6a35d1a492af7.SkyDrive.live.com/self.aspx/Blog_Tools/dotnetfx_cleanup_tool.zip
  Copy and paste this into the address bar of IE and download the tool.
  Remove all versions of .NET installed in the computer.
  Once the removal is complete, disable the antivirus and restart your computer.
  Repeat the update of windows.
  Kind regards
  Thank you.

• 10 installed on my Surface Pro and now ligtroom Windows will not load. "unexpected error opening catalog" nothing works?

  I installed 10 windows on my Surface Pro 2. I get the error "error unexpected opening catalog. When I try to open a backup catalog the same message appears. My Adobe Suite works fine. What should I do? I also reinstalled Lightroom. Same questions.  Help please!    Kim

  I have the same problem. I am able to start Lightroom by right-clicking on the shortcut and then select run as administrator. A work-around for now, but it seems that there are more than a few of us with this problem.

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• What is the difference between 32-bit and 64-bit Windows?

  soft micro isn't the developer - iv bridge was asked to, bell etc? Nobody seems to know.  I am not computer savy

  original title: re-32 bit - 64 bit.

  See if this helps:-

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  If she please vote as helpful.

  Thank you.

• What is the diff between a 32 and 64 bit, Windows version.

  Original title: is win 7 has also a 32 and 64 bit...

  1. What is the diff between a 32 and 64 bit, Windows version.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...

  3 - is the application and games from 32-bit to 64-bit media...

  1. What is the diff between a 32 and 64 bit, Windows version.
  32-bit Windows uses 32-bit programs. 64-bit Windows uses 32 and 64-bit programs.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...
  Only if you opt for a multiboot configuration.

  3 - is the application and games from 32-bit to 64-bit media...
  Yes.

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• If I try to type a name such as my videos in the address bar in my computer and press ENTER, it will not open.

  To the right:

  My name is Andrew Wissler. I have a Dell Inspiron 6000 running a 32-bit version of Windows XP Media Center with Windows Service Pack 3.  I'm having a problem where if I try to type a name such as my videos in the address bar in my computer and press ENTER, it will not open.  Instead, Windows Internet Explorer opens and a Google search results page comes up with the search term in the search box and results are presented.  Is it possible that I can enter the term into the address bar and open the folder?

  Thank you

  Andrew

  Hi André,.

  This is the default behavior. You will need to type the full path of the folder my videos to open in Windows Explorer. To do this, try the following steps:
  a. Click Start, click my computer.
  b. in the address bar, type the following and press ENTER: Shared Documents\My videos

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please HELP Fn key doesn't work not wireless working not and network card drivers is not install

  Hello

  Yesterday I bought the computer hp laptop 15-d103tx, but after installing windows 7 64 bit. button fn laptop computer keyboard does not work, Wireless does not work and the network adapter are not installing... is there a hardware problem or is it because of unavailibility of pilots. If it's the driver please suggest drivers

  will be all of your quick response

  Thank you

  Hello:

  Here is the link of the wireless driver you need:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP laserjet 1022 windows 7 (64-bit) will not install printer what can I do?

  1 HP LaserJet 1022 printer

  2. Windows 7 64 bit

  3. No Error Message

  4. the only changes to the system are updated security Windows Updater. This is a new computer and old was under XP.

  I tried to delete the printer, newer software (lj1020-HB-pnp-WIN64-en) download and try to install it, add the printer through windows and even the printer will not work. The cd version will work until you are asked to connect the printer and then nothing happens. I even tried to run overnight to see if it find and install, but nothing happened. This printer is a workhorse for me and I want to keep running, any suggestions on getting this printer is recognized and run again?

  See if the 1022 is listed under other devices in Device Manager.
  Under 'Other devices' right-click on HP 1022
  Select "update driver software... »
  Choose "Browse my computer for driver software".
  Choose "Let Me pick from a list of drivers for devices on my computer.
  Select 'Printers' > next
  Under the "factory" > HP
  Under "Printers" > HP Laserjet 1020
  Select "Yes" to the warning popup