M7-1015dx Pavilion Gov 7 say Windows is to find another browser.

Similar Questions

• can not get the wireless network... saying "windows could not find a certificate to log in to a network.

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Thanks for posting. Follow the instructions below carefully.

  1. Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
  2. Scroll down to network adapters. Develop the content by clicking on the symbol +.
  3. Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
  4. Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.

• Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a msg says: "Windows did not find antivirus software on this computer. What should I do?

  Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13.  Today a mesg says: "Windows did not find antivirus software on this computer.

  What should do?

  Download another copy of McAfee and activate it with your existing license.

  Ask for advice here: http://service.mcafee.com/Default.aspx

• I reinstall windows for windows computer registered previously and now it says windows is used by another computer

  I detected a likely virus on my system, and so I completely formatted Windows hard disk to restart
  Has not changed for the hardware on this computer (for example, new motherboard, disk, etc.) since the initial installation
  I have a FULL Windows Vista Edition full license.

  I detected a likely virus on my system, and so I completely formatted Windows hard disk to restart
  Has not changed for the hardware on this computer (for example, new motherboard, disk, etc.) since the initial installation
  I have a FULL Windows Vista Edition full license.

  Reinstalling Windows due to a likely virus normally is * way * overkill. Should have removed the virus with an antivirus program.

  Just do the reactivation by phone call. Call the number you are given.

• I have a dell laptop, it says windows host, cant find script engine "VBScript" C:\ms4w\tmp\invisible2.vbs script ".

  "Windows script host - this box Monte-it is the text next message - can't find script engine"VBScript"C:\msmp\invisible.vbs."

  "Windows script host - this box Monte-it is the text next message - can't find script engine"VBScript"C:\msmp\invisible.vbs."

  It seems that a malware tampered with items or explore startup... when removing malware by antivirus software, it will keep these effects... even if the antivirus software has removed the body of malware, it did not set the effects and changes made by invisible.vbs

  (1) is there anything concerning the path /vbs u you described here, to the system startup tray disable it...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/

  or

  try to use "Autoruns for Windows" and check if there is a boot entry related to the path /vbs u l you have described and if so delete...
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths...

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  then search for the file path /vbs you have described here and delete this key... RESET

  more this could be due to this... If you still get that you can move forward with this...

  (2) go to start > run and type regedit and enter
  Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  On the right, look for Shell which should have value of explorer.exe just just like that... All right of explorer.exe, delete if there is nothing.
  
  (This is the correct way, it should be)
  

  (3) under the same key Winlogon also look for Userinit check if it is as in the picture... it's the way it should be...
  
  (This is the correct way, it should be)
  

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• Pavilion 1301tx g6: 10 windows upgrade compatibility

  First of all, I really want to try the new windows 10. I use windows 7 Professional for hp pavilion 1301tx g6 and it's grahics driver amd hd 7450 m. My question is if I upgrade my laptop for windows 10, will be this driver it is necessary for the new operating system? Let me rephrase the question, can I get the graphics driver to my laptop for windows 10? Ireally wantto besure as to its compatibility. With my other laptop sony vaio, I tried to install the new os and I get BSD. They (CC) said the graphics driver is not compatible, but when I click on the logo of small windows on the bar he spots says your pc is compatible. This time I really want to be sure as to its compatibility. Please help me in this matter.

  @SBKH: Unfortunately, there is no HP Win10 driver for your device. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.
  
  You can try to use Windows updates to find the drivers from Microsoft deposits for your device: http://support.hp.com/us-en/document/c03330139
  
  If that does not do anything, you should read this another link: http://support.hp.com/us-en/product/HP-Pavilion-dv6-6000-Entertainment-Notebook-PC-series/5048664/model/5077076/document/c04758308/
  
  If Windows Update doesn't give new drivers, you can pursue alternative which are described in the linked Microsoft Windows Insider community thread: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293
  
  If you then run into trouble, install the drivers through Windows Update, you can try to use of Microsoft Windows Update Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter

  Also... If you want to test the upgrade, then before doing this, consider using a third-party application Imaging/restoration as Macrium Reflect to image your machine off so that you can easily restore it if something does not work.  And don't count on the Win10 GoBack function back on Win7, it is not reliable and can leave your computer in a damaged state.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

• Pavilion dm4: cannot install windows on my laptop

  I had trouble installing a hard drive in my laptop.  The laptop is a Pavilion Dm4.  Below are the steps I've tried initially.

  1. insertion of my hard drive with Windows 7 installed and works very well in the Pavilion dm4.

  RESULT: computer crashed just after that the windows image came.

  2 reformat the hard disk by performing a clean install of Windows 7.

  RESULT: Once installation is complete my Windows installation fails and I get a message saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  3 reinstall using the system recovery disk that I just bought HP using the code series of laptops.

  RESULT: After inserting the recovery disks and the driver installation disk, I get a message

  P2PP Burn Boot Check failed

  Possible causes

  1.yellow - bang occurred in Device Manager

  2. some silent-installation failure of applications

  3 Found failed to PININST_BBV

  4 Found failed to PININST_BBV2

  5 found memory dump file

  Suggestions:

  1. check REGDEV_BB. Drivers LOG

  2. check the BBApps. Application log

  3. check the memory dump file

  Hi @orangeg66,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and P2PP Burnboot could not install. I have seen that date back to 2012 first of all, and then by a default BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop. Restore factory default BIOS works on it.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.
  
  Please let me know how it goes.
  
  Thank you.

• Pavilion dv7-4180: upgrade Windows 7 to 8

  Hi all

  I have a HP Pavilion dv7-4180 using Windows 7.  I bought a Windows 8 of Microsoft and the Bill says:

  "Earn 8 32-bit/64-bit English VUP DVD."

  Online Microsoft provides this statement (quoted):

  «Download and install Windows 8.1 to Windows 7»
  1. sign in to your Microsoft account
  2. in the menu of left, click downloads, subscriptions and product key
  3. find your purchase Windows 8.1, and then click Download
  4. If a dialog box appears, click Run to start the installation
  5 follow the instructions in the installation wizard to complete the installation of Windows 8.1 "

  Before thiis upgrade, is there advice that I should follow to avoid an honest mistake?  For example, losing a feature because of the upgrade?

  Thanks for your comments.

  AtAF

  AtAF wrote:

  Peer

  Very practical advice.  Device Manager to see 'pilot' listed, or should I navigate on the control panel?

  Thank you.

  AtAF

  You can do this and see if there are drivers that manufacturing has to W8 for that specific material. But you should check the site driver from HP for your P/N and see whether they have or W8 drivers list. Don't forget the older laptop after 2012, the chances of HP with W8 drivers will be slim to none since they do not include support for older hardware.

• Please find Driver for BCM20702A0 for hp pavilion dv7-4285dx for windows 7

  Hello

  Please help me find the driver for BCM20702A0 for hp pavilion dv7-4285dx for windows 7.

  I'm going to each site, trying to find a driver for BCM20702A0 because I tried to install a 4 (badge) bluetooth dongle on my laptop but it says 'impossible to update software' when I try to run the installer from the manufacturer's website. Then, I go to devices and printers and try to solve the problem with the bluetooth dongle and it says "BCM20702A0 is not a driver" I tried to download broadcom and updated centrino HP network driver for my laptop page up-to-date, but that does not solve the problem. All these other drivers that I find are for other computers laptops and even still, I can't navigate to links posted on this site, it brings me right back to the search page.

  Thank you

  Alex

  Hello:

  Try this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131427-1&cc=us&DLC=en&LC=en&OS=4063&product=5273735&sw_lang=

• I cannot download win8 - gets to 99% then nothing; sometimes says windows smart screen says app unrecorded

  I cannot download win8 - gets to 99% then nothing; sometimes says windows smart screen says app unrecorded

  Thank you all - my solution is to download version 17, instead of the current 18 & everything works fine. I have not tried to update at 18 yet but I read somewhere thinkI version 18 is not completely compatible with win8. In any case I also removed McAfee parent control post DOWNLOAD FFv17 because it was a pain!

• Help. Window opens on the Firefox browser that says Application JavaScript and according to what he says 101. There is an OK bitton. When I click on OK, place just the window again and again.

  Help. Window opens on the Firefox browser that says Application JavaScript and according to what he says 101. There is an OK bitton. When I click on OK, place back the window. Then once again hit OK and box disappears when I move my mouse the same Monte box again. I even called Apple support. They tried things; got me well maybe some ting setbold textin Firefox preferences. It started right after the installation of update of Mac at the close. Any help, please. My browser is completely blocked (obviously) in this loop! [email protected] jason

  Hello

  Please check if this happens in Safe Mode.

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

  Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. Options > Advanced. All these parameters/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme or hardware acceleration is causing issues.

• HP Pavilion p7-1443 and Windows 7

  Hello

  I just bought the HP Pavilion p7-1443 with Windows 8.  I was wondering if it is possible to replace Windows 8 with Windows 7 on this computer.  Has anyone tried this before?

  Thank you

  Serrano

  Hello:

  It should be doable.

  You can use the drivers of this model that has the same motherboard as the one you have.

  http://h10025.www1.HP.com/ewfrf/WC/Product?CC=US & DLC = in & lang = to & LC = in & Product = 5197676&

• Pavilion 15-n249sl drivers windows 7

  Hi everyone

  I am trying to install Windows 7 ultimate on Pavilion 15-n249sl drivers windows 7 and I have a few problems with the ethernet card, USB, webcam and video output drivers.
  I run recognize many utilities for hardware, but I still don't know the chipset for example, thank you in advance for help

  Spoiler (Highlight to read)

  Hello:

  Here is the link to the Intel 32-bit driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23638 & lang = eng & OSVersion = Windows % 207% 20 (32-bit) * & DownloadType = drivers

  I'm of Sicilian origin on my mother's side, so I can read some Italian (and some Sicilian too).

  Controller PCI Simple Comms

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123657_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  PCI (card reader) device

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Unknown:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1 & CC = US & DLC = in & LC = on & os = 4131 & Product = 6818636 & sw_lang =

  You have a great weekend too!

• HP Pavilion 10-f001au: I need driver for HP Pavilion 10 - f001au for Windows 7 64-bit

  Hey well im new here, I can't fo my Pavilion 10-f001au for windows 7 64-bit driver please? Because my Driver CD is gone and I need to reinstal windows because I had some delay here.

  Do you have internet in 10-f001au?

  Touchpad

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65643.exe

  Realtek LAN driver (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65647.exe

  Realtek card reader driver

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65644.exe

  AMD graphics driver high definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66817.exe

  Driver Audio Realtek High definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65645.exe