Soundcard not detected

Similar Questions

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• my ipod is not detected by itunes

  Hello, so, as it is said, my ipod is not detected by itunes and it s not because taking usb does not work or has problems because it becomes a hard drive on my computer.

  I have tried everything but nothing works:

  I have reset my ipod and itunes, uninstalled, re installed, turn and turn on my computer and itunes and my ipod as well, I tried only everyt things written on the internet.  as I completely cleaned my ipod it, but now I'm stuck because I can t get my music back.

  and nothing worked, so I'm really frustrated and really need help please

  Thanks /.

  What is an iPod touch?   IPod touch does not appear as a USB storage directly on your computer.  An iPod nano can appear there.  The current nano iPod looks like this

  

  Also, is your computer running iTunes on a Mac or Windows PC?  If Windows, which free?

• Drive external DRIVE not detected after update of the Sierra

  I upgraded my Macbook Air Sierra this morning. Since then, whenever I plug in my external Seagate HDD, it is not detected in the Finder, or see a shortcut on the desktop. However, it is visible in disk utility.

  I connected the HARD drive even air to my friend Yosemite running, and it works as usual.

  How the drive is formatted?

  Post a screenshot of what you see in disk utility.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Could not detect my iphone 5 s after the updates of iTunes

  I just updated my 5s 10 IOS and updated itunes to the latest version. When I connect my phone to the computer, itunes does not detect the phone. The phone icon does not appear...

  I tried the things:

  1. reboot the computer

  2 restart my phone

  3. connect the phone to three different cables

  Hello

  Follow the steps here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• can not detect the iphone after upgrading 12.5.1.21

  Set to update to the latest version of itunes (12.5.1.21) and now itunes does not detect my iphone.  tried to remove the lockdown folder. tried to restart all devices.

  Windows 10 with all updates installed. Someone at - it suggestions?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.5.1.21 to 12.4.3.1 or 12.4.2.4, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Hard drive not detected 50% of the time to start up

  I have a model of Macbook Pro mid 2012 with the following changes:

  • Upgrade to 16 GB Ram
  • DVD player, replaced by Bay and old (existing) 500 GB hard drive for storage
  • Hard drive replaced with 250 GB SSD (Samsung EVO 850)
  • Windows via Bootcamp 10
  • Mac OS X Yosemite
  • Refind installed at startup

  Recently, my existing SSD drive gave me a lot of questions - so I'm a new and SuperDuper'ed the existing on it. Formatted the Windows partition and reinstalled Windows 10.

  I have 50 GB on the Mac drive and 200 concerts on Windows.

  The issue that I am facing is that on every other bootup, the Mac does not detect the hard drive.

  If I OPTION-press and hold the button, I see only the 500 Gig data drive (which is not bootable).

  Then, I need to restart and COMMAND + R (or D) to enter the internet recovery mode, wait until the choice of network is displayed.

  Then when I reboot, I am presented with the original hard drive and multiple start options (Mac / Windows) on Refind.

  I don't think it's a matter of refind, as happens even with uninstalled Refind.

  This does not happen when I plug my old (SSD by default).

  What could go wrong on the new hard drive and I can barely turn the question?

  Thank you.

  What are the contents of the disc in hand and Optibay Bay?

• SpywareBlaster can not detect mozilla firefox

  SpywareBlaster 5.2 no detection problem of Firefox in my older Pavilion with Windows 7 Home Premium but Spywareblaster 5.2 will not detect Firefox in my HP Envy.

  If you want to use a free alternative to Spywareblaster, you can use one of these free analytical tools:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Personally, I recommend AdwCleaner. That's what I use and it does a great job to eliminate any software advertising or other malicious files in Firefox.

• MacBook Pro does not detect monitor Dell through CDM

  Guys, a few weeks ago I asked a question if bolt of lightning 2 CDM-compatible monitors. You guys lied. I got the Dell P2715Q today and I have connected to the computer with the USB cable I had Plug and cable thunderbolt. I did everything, but my Mac has not detected even if I pressed the "Detect" button in the system preferably several times. I restarted my computer and still nothing happens. The monitor speaks to me of * like 'Enter in Safe Mode' then what I do now? What the * Apple? You create all by yourself? Your useless thunderbolt screen is worse than the air show 2011 MB! Help guys!

  What USB connection?  There is no "monitor" for this Dell Monitor USB connection.  The USB connection is a USB hub built into the monitor for other devices.  You must select one of the following values: DP, HDMI or mini-DP.

  I'm sitting on my right now uses a new MacBook Pro computer w/Retina.  It is connected via the Thunderbolt port to a Dell U2715H using the connection of the RFP at the back.  No problem at all.  I used this type of connection for the most recent years (previously an old MacBook Pro, 2011 model).

  Rich

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• Tips for when your webcam is not detected

  EDIT: If you have recently upgraded to Windows 8 and experience this problem, please read this document.
  
  Here are some tips to solve a problem of webcam not detected.  I see this question get asked a lot so here are the steps you should take to resolve the problem.
  
  To start, you make sure that the device is detected by Windows.  The following instructions are for Windows 7, but should be very similar to Windows Vista and Windows 8.
  
  Option 1: Check Device Manager to make sure that it works correctly.

  1. Right-click the Start button, type "Device Manager" and press ENTER.
  2. Once charges Device Manager click 'View' then "Show Hidden devices."
  3. Locate the section "imaging devices".
  4. Note If you see the webcam here.
  5. If the webcam is listed, click it and check that it is not 'disabled '.
  6. If the webcam is listed and disabled, go to Option 2.  If the webcam is not listed, you will spend on Option 4.

  Option 2: Allow Windows to re - install the device.

  1. All remaining in the Device Manager, right click on your webcam and select "Uninstall".
  2. If you are prompted select "remove driver and driver package".
  3. Restart your laptop and allows Windows to attempt to reinstall the webcam.
  4. If Windows detects the webcam check the operation of the webcam.
  5. If Windows does not detect the webcam and install move to Option 3.

  Option 3: Manually install the drivers for your webcam.

  1. This site allows to determine your product/model number.
  2. Visit the Page of Support HP and use this product number to visit the specific page of your product.
  3. Go to "Drivers and software" and are looking for the driver for your webcam.  NOTE: the drivers for the webcam are sometimes provided with the YouCam software.
  4. Download and install this driver.
  5. Restart the PC.
  6. Check the features.

  Option 4: Manually re - detect the hardware.

  1. Disconnect all external devices.
  2. Shut down the laptop.
  3. Remove the battery and AC power.
  4. Press and hold the power button for 10-15 seconds.
  5. Reinstall the battery and AC power.  Then turn on the laptop.
  6. Once Windows is loaded back to the Device Manager.
  7. Selection 'Action' and then 'search for material changes.
  8. If the Device Manager detects hardware let settle.
  9. If Device Manager does not detect the see material Option 5.

  Option 5: System Restore and system recovery.

  It is very well described in this document.  Note that all data not saved prior to a recovery will be lost.

  6 options: Repair or replacement.
  
  If none of these solutions worked for you, it is likely that you are experiencing a hardware failure.  It is possible to replace the webcam or reinstall a loose ribbon cable.  However, it is one of most difficult repairs on the laptop.  If you want to try this repair, you can visit your laptop support page and go to the section "manuals".  There is normally a "maintenance and Service Guide" for laptops, this will cover the disassembly of the laptop.  You can then use HP parts Surfer to locate the part for your laptop.

  If you do not want to attempt a repair yourself you can ask HP about a repair.  For customers in the United States / Canada, you can call 1-800-474-6836.  If you are not in this region, you need visit the HP Support Site to get contact information for your region.

  I hope that everyone considers this information useful!

• Error 512 - fan chassis rear not detected

  Hello

  Just unpacked my birthday gift today... a brand new and shiny, HP Pavilion HPE-595uk (yay!).  My husband purchased directly from HP, about 3 weeks ago.  It has been used until today.  (Happy birthday, me!)

  However, on first switching on, I received a message from bios:-"512 - undetected, rear chassis fan error press F1 to continue"

  I pressed F1 and start continued, Windows 7 is installed, everything seems ok... I'm talking about (entered) to you on the PC right now.  However... If I have to powercycle the PC, I get the error (error 512 - rear, chassis fan not detected, press F1) every time.

  That means there is a problem with this PC? The rear chassis fan should be detected?  If a cable is loose?  All new PC remember... just out the box 2 hours.

  Thanks for the inforfmation.  I just started my new computer that has the message 'Error 512 - rear chassis fan not detected'.  Rear fan connector had a bent pin and the connector has been sitting on it.  Pushing the stem with long nose pliers and a small screwdriver it fixed and enabled the connector to connect all the way and everything is fine.  Be sure to remove the power cord from the back before you do.  I did not, and the button was hit during the removal of the side panel.  Since I was a SDS I heard the computer turn on - I was lucky is not to run out of something!