M7-j020dx USB\VID_138A & PID_0050 & REV_0060 Windows 7 driver

Similar Questions

• HDX - 18 a CTO-1200: validity sensors need driver for HDX-18 64-bit Windows 7 USB\VID_138A & PID_0001 & REV_0372

  I looked everywhere for this driver.  The validity of the sensor connection is:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=ob-65053-1

  that leads to nowhere part on this site.

  This is to set the 'unknown device', marked by W7 Device Manager.  The hardware ID is:

  REV_0372 & USB\VID_138A & PID_0001

  USB\VID_138A & PID_0001

  I don't want to pay a seller "Find-every-driver-in-the-universe" an absurd $$ for their application, when it used to be free from HP.

  Thanks to anyone who can give me a lead.  I really appreciate it!

  Joe

  (PS)  I have another "unknown device" with only the following HW ID:

  ACPI\ENE0100

  * ENE0100

  Hi, Joe:

  See if they work...

  This package contains the driver for the validity fingerprint sensor in portable models supported and operating systems.

  File name: sp45050.exe

  This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.

  File name: sp45045.exe

• ProBook 6560 b: USB\VID_138A & PID_003C & REV_0086, USB\VID_138A, PID_003C,.

  I have a laptop HP probook 6560 b,

  Product number: LW953PA #ABG

  Windows 7 Professional 32-bit Service Pack 1

  When I looked in the Device Manager, in another subfolder of devices, there is a yellow! for "unknown devices".

  Details of the hardware ID have been:

  USB\VID_138A & PID_003C & REV_0086

  USB\VID_138A & PID_003C

  I also have an another yellow! for "unknown devices".

  Details of the hardware ID have been:

  ACPI\HPQ0004

  * HPQ0004

  Any help on how I can address these issues?

  Cheers, Hepstarr

  Hello

  Please install these drivers below and see if this solves your problem.

  USB\VID_138A & PID_003C & REV_0086

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5071172&swItemId=ob_134806_1&swEnvOid=4158#tab3

  ACPI\HPQ0004

  Could be Quick Launch buttons or (more likely) ProtectSmart Hard Drive Protection

• HP ProBook 6560 b - USB\VID_138A & PID_003C & REV_0086 & USB\VID_138A & PID_003C

  Hi all

  I saw a lot of people have the same problem with HP, but I can't find the driver for my machine.

  My machine is HP ProBook 6560 b runing Windows 7 32 bit.

  In my device manager I have an unknown device and when to go in properties I found the following:

  Genral - Port_ #0001.Hub_ #0003 & the drivers for this device are not installed. (Code 28)

  Details - USB\VID_138A & PID_003C & REV_0086 & USB\VID_138A & PID_003C

  Can anyone help please?

  Anthony

  Hi, Anthony:

  Here is the link for the driver you need for this device:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5045605&prodNameId=5045607&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-106154-1

  Paul

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.

• USB 3.0 for Windows 7.0 Pro 32-bit driver

  Hello

  I recently bought a HP Pavilion 500 - 020L (H5Y82AA #UUF). I install Windows Professional 7.0 (32-bit) ON this PC.

  I was not able to find the Windows 7 driver for 2 Ports USB 3.0, because the HP site have Windows 8 drivers.

  Can someone please help?

  Thank you.

  Lau Kok Chiang

  Hello:

  Here is the link for USB 3.0 driver your PC if necessary;

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

• Satellite A500 - 14K - key USB not recognized with Windows 7

  I have a Toshiba Satellite A500 14 K, it was pre-installed for Windows 7.
  I bought the upgrade to Windows 7: I got a PC upgrade disk and a windows upgrade disk. I launched the first disk, then the other.
  There was no particular error in these facilities.

  Since this upgrade, my PC doesn't recognize USB keys while they work perfectly with the previous version of windows with this pc. They are normally key usb plug-and-play. When I launched the update of windows, the driver exists, but installation failed in error with a message of access problem.
  I check that the firewall does not block access. I installed the latest version of the BIOS

  I can't find any similar pb on the forum
  Thank you for your help

  Hello

  Have you tried to update (restore) chipset utility?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• USB\VID_138A & PID_003F & REV_0104

  I need a free link to download this driver.  It's about to drive me crazy.  Thank you

  USB\VID_138A & PID_003F & REV_0104

  Win 7 64 bit

  Laptop HP probook g1 640...

  Hello

  Install the driver of sensor of validity on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64338.exe

  Kind regards

  DP - K

• How can I download data from key USB flash to a Windows 7 computer

  I need to transfer some files from my PC to my PC Windows 7 Windows XP using a USB flash key. I've used Windows Easy Transfer to move my files without problem and some programs but did not download some files. I downloaded these files on a USB flash and I can access the files, as long as the stick is pluged. How can I download data from the USB flash on my Windows 7 computer

  Hello

  The following video may help:

  http://www.YouTube.com/watch?v=hrMQh0Xkpvs

  or this article:

  http://www.swarthmore.edu/documents/administration/its/how%20To%20Use%20A%20USB%20Flash%20Drive.PDF

  and here:

  http://TECHTIPS.salon.com/use-USB-flash-drive-transfer-files-PC-Mac-2544.html

  (Mac here can be a PC).

  Good luck.

• USB 3.0 for g7-2246-Windows 7 driver

  I'm tryingto findthe right driver for USB 3.0 for windows 7 64 bit

  Hello:

  Download and install the AMD Chipset drivers and reboot.  You want the chipset of 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• HP TouchSmart 15-j003ed USB 3.0 Controller ENVY & LAN driver not working after installing Windows 7

  Hello

  A month ago I bought a TouchSmart from HP ENVY 15-j003ed. After that I installed Windows 7 Professional 64-bit, the USB 3.0 controller and the LAN port does not, even when I use the drivers from the HP website.

  All the other drivers work, how is it possible, and at - it someone has a solution for me?

  Now I only use Wi - Fi to connect internet and changed the USB controller in the BIOS to USB 2.0

  Please try the PCIe GBE 10/100/1000 Realtek RTL8111B / RTL8168B / RTL8111 / RTL8168 / RTL8111C / RTL8111CP / RTL8111D (L) / RTL8168C / RTL8111DP / RTL8111E / RTL8168E / RTL8111F / RTL8411 drivers directly from Realtek - http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

  and

  Intel USB 3.0 xHCI driver directly from Intel-

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=software+products&ProductLine=chipset+software&ProductProduct=Intel%C2%AE+USB+3.0+Extensible+host+controller+driver

  Please click the White Star of KUDOS to show your appreciation

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• USB device recognized on Windows 7, but not Windows XP

  Last week, some of my USB devices need not be recognized on my Windows XP SP3 laptop.

  First of all, it happened with 2 external USB HDD connected via a mini USB hub. Connecting them individually did not solve the problem. The error I got was:

  USB device not recognized. One of the USB devices attached to this computer has worked and Windows does not recognize.

  More importantly, the laptop is no longer recognizing my USB thumb drive, which works perfectly on my Windows 7 machine to work.

  Can I reinstall my USB drivers? Just remove the USB devices, reboot and let Windows reinstall them? They need to be specific to the manufacturers of the drivers?

  I deleted it and reinstalled my hubs USB Device Manager etc, but a device is not installed correctly: mass storage controller. It is of course preventing me from accessing the USB and external hard drives. Where can I get the drivers for this if Windows XP does not have? Sure that the key USB is FAT32 (the default format) I went in the properties of the mass storage controller in the Manager of peripheral and copied the device ID. I did a Google search and was surprised to find that it was a card reader. I downloaded the drivers from my manufacturer Web site, and Windows has detected and installed the drivers for the card reader, as well as the mass storage controller. The USB appears in the Explorer, but shows 0 items. I have After the reboot, the USB is not in Windows Explorer, and when I unplug and reinsert an error comes up saying the USB device is not recognized and malfunctioned.

  The solution was to turn off the laptop, remove the power cable and leave it for a few hours, before feeding it back.

  Windows detected and installed the device very well then.

  I don't think that I understand perfectly why he fixed.

• Peripheral USB has malfunctioned. Windows does not recognize it.

  Peripheral USB has malfunctioned. Windows does not recognize it.

  Hello

  ·        What is the exact error that you receive when you try to connect USB?

  ·        Since when are you facing this problem?

  ·        Which device you are trying to connect via USB?

  ·        This problem occurs only with a USB device or USB devices?

  Method 1:

  You can try to plug the USB key into a different USB port and check if you face the same problem.

  Method 2:

  Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

  (a) click Start

  (b) the Device Manager type in the search bar and press ENTER

  (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

   

  Method 3:

  I also suggest to run the difficulty he provide in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 4:

  You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also check out the link below:

  http://support.Microsoft.com/kb/555375

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.