m8013w overheating - stop - no warning
I've been struggling with this for months.
Randomly, the machine is just off.
I'll be reading email... or reading a web page. The system shuts down without warning.
The only indication I seem to hear is that the indoor fan is starts faster than usual... takes about 5 minutes... and then POOF! System shutdown.
I was told that it is probably an overheating problem.
This is common with this model?
I have had it for over 4 years now... and he started to do the last 6 months.
I opened the case to see if there is dust or dirt anywhere, but it's clean. I took the air compressed and blew the heat-sync block just in case... but nothing seems to help.
Voluntarily, I tried to use HPs tools and testing program. (Where you can select the tests to run material.) I ran all the basic tests that will work perfectly... BUT - when I run CPU stress test... about 30% by running - WOW! Shut down the system again.
It all looks like a heating problem.
What can I do?
I bought a PCI fan and plugged that... but it doesn't seem to help any. The part of the box does not seem to run hot... It takes just the chip. I was told to try to re-application of thermal paste. So I did... and it stops again. Is there something better? They are all born equal? I used the COOLER MASTER ceramic Polysynthetic - gravity 2.37 composed. If I had another CPU fan, one who turns harder... would only work/aid?
Is my computer CPU shot?
HELLLLLLP!
Any ideas are greatly appreciated!
Thanks Dave,.
I ran the two separately, and both gave completely different results. I don't know who to believe!
At least the problem seems to be solved if. New synchronization of heat & fan does wonders...
The old hardware ran the hot fan speed and boosted significantly under load - which hardly cooled the chip a lot.
This new Hyper TX3 of CoolMaster is GREAT! A bit big for the space, I had to reverse one of the fans and press the cables pretty tight, but not it's barely more than 42 c at full load. Much better than the other installation.
If everyone followed this thread - best solution: replace the first CPU fan, or try a heatsync/fan combo. This is done, the system works like a charm again!
Appreciate all your efforts and Dave escape. You showed me some new great tools too!
See you soon!
Tags: HP Desktops
Similar Questions
-
Satellite L30 - 10V overheating & stops
Hello
I just brought a L30-10 s. I have problems with it overheating and closing down, I burned a cd last night and he just finished it before cut off because it got too hot. If I leave a few minutes it starts normally now but if I try to restart immediately she starts but stops immediately.
Of course, this is not normal?
Help!
This is definitely not normal.
According to my experience the high temperature causes a lot of strange problems, and it looks like overheating. Maybe the fans are dirty with dust and debris prevents the runtime properly underway cooling. In my opinion, the fans should be cleaned. Vacuuming is a nice toy but risky because the strong suction can damage fans. Many computer stores provide sprays professional compressed air that can be used to clean the fans.If this does not help I recommend to contact a technician phone for professional cleaning. Perhaps the new thermal grease which is placed between the CPU and cooling modules could improve the situation.
Note: Don't use the laptop in bed or on the lap, but still on the table. Furthermore it is important to have sufficient free space around the laptop to get good air circulation costs.
Hope I could help.
Good bye
-
TravelMate p253 stops without warning
Bought my Acer may 2014 and recently the pc stops randomly without any warning. No blue screen or the reason. Help, please
Now, I've discovered it's a hardware fault. Yesterday, I contacted support and was invited to start the Pc in Bios mode and leave in this State and to see if firm mc always down which he did it 32 minutes later. I hope this will help someone else who has this problem. Thank you all for the help you provided us
-
After that windows update, the system stops without warning and can not perform restore
My computer automatically performed an update on yesterday now it pc closes down without warning system will not perform a restore to an earlier date that I get a message that an unexpected error occurred during restore. I tried two different restore points, any help is appreciated.
Hello
There are a variety of reasons for system restore problems
Norton and Norton product Tamper Protection is the main
Read about it:
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
You can try restoring the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
and malware can interfere with the restoration of the system
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
How can I stop the warning message to appear low cartridge.
Checking the box "in the future do not show this" isn't making the messages stop.
How to overcome this please?
Thanks for this old_geekster.
Unfortunately, it turns out that the techo that installed the machine only gave me the drivers, as it claims that the HP programs were too extravagant large! So, I do not have a file of program of HP and therefore no Toolbox!
Guess I'll have to put up with excessive compensation warning messages until I have empty cartridges...
Thanks for trying to help.
Rgds, Norm
-
How to stop security WARNING pop up all the time to come
original title: question of security warning
How to stop security alert pop up coming all the time when you view the web site Clikpic. Whenever I select an image or a page, he asks me to select Yes or no, if I want to see the next page.
Hi EDeeS,
The settings Windows 7 UAC (User Account Control) has a slider to change your level of comfort with the notifications. You can choose one of the following four options:
· Always notify me and wait for my reply. UAC (User Account Control) prompt is displayed on the Office secure when a program is trying to install the software or when you or a program tries to change the settings of Windows. If you do not click Yes, after 30 seconds, the UAC (User Account Control) prompt automatically denies the request.
· Always inform me. The UAC (User Account Control) prompt will appear on the desktop when a program tries to install the software or if you or a program changes Windows settings. If you do not click Yes, after 30 seconds the UAC prompt automatically denies the request.
· Notify me only when programs try to make changes to my computer. You are notified only when a program tries to make changes to your computer, including changes to Windows settings.
· Never notify me. This selection disables UAC (User Account Control).
http://TechNet.Microsoft.com/en-us/library/cc709691 (WS.10) .aspx #BKMK_S2
Note: You must restart your computer when you turn on or turn off UAC (User Account Control). Change levels of notification does not require that you restart your computer.
When should I programs to make changes to my computer?
-
I continue to receive a warning when you try to close multiple tabs at once. The check box in the settings for the warning is not selected and the relevant about: config is set to false, but it still shows.
Well, it's extremely irritating. Looks like I have to downgrade my version of Firefox to avoid the consequences of this "feature". Why anyone would think that force setting warning when you can disable it with a checkbox is completely beyond me.
-
stop the warning to change the host name
I continue to be careful:
Your computer name is already in use on this network. the name has been changed...
I click ok and keeps coming back with many more and will not stop!
Thank you
This is the share name that is duplicated on another device on the network, or the name of VICTORIES under the Ethernet settings. Both are in system preferences.
Under network, click the network connection you are using (wired or wireless). Click the Advanced button, then the WINS tab change the NetBIOS name to something else. Click OK. If it is active, click on the button apply.
If that doesn't help, click on the share icon. Change the computer name to something else. This is necessary, or even do anything if at least one of the options of sharing is checked.
-
Hi people,
My laptop (type in the title) is working absolutely fine for the better part of 18 months until recently where it was extremely hot underneath (I guess it's overheating), but he then turns off and when I press the power button to wake it up, a little light in the form of "Lightning" flashes between the power light and the light indicating a disc present (the power and the light disc not flashing).
I tried most of the procedures standard (I followed EACH link for help on Internet, vacuum cleaner sites on the fan vents and sent e-mail messages), but in the end, it brings me back to where I started, so I resorted to this forum.
Please can someone help?
SkillageDan XD
SkillageDan XDPeople OK, problem solved. Basically, what happened was that some solder had melted by the motherboard so was not enough power to the laptop and so it won't turn.
I have sent a repairman so everything of fine, hope it will be useful.
-
Vista stops without warning regardless of which program, I opened
This has happened for three weeks. I am a user of modrate green. I have to restart several times during the two session.
HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I've had the computer alittle more than three years now. He began to close in on its own all recently. I noticed the Tower Gets and still accellerated before turning off.
Hello
Accellerated? You don't know how to tell you that?
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
To be able to remove ALL and reinstall all the cables (both ends), card and memory - in fact remove and
replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
fans of work (before and after opening the case).This sounds like material so if the above does not help you then probably need the help of a
real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
Support from the manufacturer.===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html=========================================
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Tecra S3: Laptop stops due to overheating
Whenenver I run processes of CPU on my laptop, computer base and the table heat sanctioned and the laptop stops without warning after a while.
What can I do?
Hi Kersten
May I ask how long do you use this laptop? This issue was in the past?
Mainly of overheating problems occur and are present because don t cooling modules work correctly the dust and debris inside the laptop keeps fans of rotation full implementation, this increases the temperature at the critical level and the laptop stops automatically to prevent the equipment from damage.So in these cases, it s advisable to check the cooling modules and clean it. Vacuuming may help, but be careful that such procedure could damage the fans!
Then maybe you'll ask a technician or a service partner Toshiba for assistance and a professional cleaningGood luck
-
Satellite A205 - stops randomly
My laptop has had random stops without warning. It stops just completely out of nowhere. I noticed that my system hangs as well lately, but I don't know if it is part of the same problem. For example, Firefox would work fine, but when I click on anything either on the taskbar, the taskbar crashes. Meanwhile, Firefox continues at a normal speed. This only happens randomly. I tried the antivirus, spyware scans, disk defragmentation, and CCleaner scans (may be others I'm not remember). I tried to run without the battery to see if that might be the problem, but after 20 minutes of use it stops again. I got it running for three days with no stops, but other days, it stops every 15 minutes. I tried to leave off the computer for the night to be sure that it wasn't just an overheating of long use, but still it happened. He felt hot, and everything seems clean on the inside. I am running:
Windows Vista Edition Home Premium
Service Pack 1
Intel Core 2 CPU T5300, 1.73 GHz
Memory: 1.00 GB
System type: 32-bit operating systemI don't know what information could be compared to the problem, but if there is anything I can give to help find a solution, let me know!
Any ideas on what could be the problem? What can I do to fix this? For awhile I was shrugging it off, but since it happened in the middle of tests for classes online I decided that something must be done.
Thank you for the support,
Doug
Hello!
I agree with Akuma. To me it looks like overheating issue too because normally the laptop stops due to a higher internal temperature. This protects the material. Otherwise, the material will be damaged.
To clean the laptop, you can use compressed air jet. This could blow the dust from the cooling fans and therefore you should not disassemble the laptop.
Compressed air spray is very cheap and you can get it from every computer store.Also if you have installed a non-Toshiba display driver, you must remove it. These drivers don't have protection against overheating and not designed for the mobile graphic display cards.
Then please download and install the Toshiba page display driver.Good bye
-
Satellite A200 stops automatically
My Satellite A200 is less than 10 months old, but he started just suddenly stop without warning.
When I try to turn it on again it often does not reach the screen of Vista before turning off again.
Interestingly, when I remove the charger cable, it seems to be able to start and to survive at least for a longer duration.Any ideas please?
Hello
I think that the laptop automatically stops due to a higher internal temperature.
The point is that these books supports protection against overheating and if the temperature increases to a critical level, the laptop stops automatically to prevent material damage.In most cases air can circulate properly due to clogged cooling grids and therefore the temperature rises to a higher level.
In my opinion the cooling fans should be cleaned.Compressed air jet is a professional tool that could help you get rid of the dust and debris.
Welcome them
-
X 201 random stop with new battery
Hi all
I use my X 201 for 4 years now without any problems. The original battery is tuyanteries out, I replaced it with a 9Cell Duracell (Sanyo) one.
Since then and only when I use the new battery, this disconnected, my laptop randomly stops without warning. No overheating problem.
Win7 newspapers pointing powerfailure (power core to restart shows error 61)
(I have no idea) the reason for this behavior odd ii) the remedy
I would gladly buy a new Lenovo battery if only I was sure to solve the problem...
best regards and thanks!
Christophe
.
Hi all
I contacted the community because my new Sanyo battery would be suddunly and turn off at random, causing of course my Thinkpad X 201 to close.
Here's what I found: aft uf the battery, there is a slide button to lock it once you insert it into the battery tray.
On battery 6cells, simply insert, yo hear a click, and the battery is locked.
On the battery 9 cells (at least on the shot I bought) the sliding button must be moved manually to the "Locked" position If you don't move it, the PC starts normally, but stops abruptly after 10, 30 or 50 min, come anytime.
Problem solved. I hope this can help!
Christophe
(PS: I'm not really proud to have alerted the community on such a beast detail... apologies and thanks to x220forMe who provided valuable advice!)
Maybe you are looking for
-
In the last 2 days, the STORY was available from today, yesterday, 7 days and 1 month... suddenly everything has disappeared and only today and yesterday is history available. Yes in the privacy settings... I have... "remember history" so what's the
-
We just bought the Sony BRAVIA KDL55HX. Great TV EXCEPT - who made access to the Sleep function. All other TVs we had the timer had a button on the remote control to directly access the Sleep function. Depending on where the Home button has been used
-
Satellite L300 wireless problem - 11 c
HelloI have a problem with my L300 - 11 c.I can't find a connection with my router.The serial number of my toshiba is: PSLB0EIf I turn on the wireless switch, nothing happensFN + F8 does not work either. It says everywhere that there is a wireless ne
-
I'm not sure I'm on the right table. I have an Acer desk top pc. Windows xp, windows 8 (I think) HP Officejet 6310 all-in-One Everything worked fine for a few years. 2-3 days ago when I clicked on print a pop-up asked me who I wanted to fax & info It
-
I've created a logo in Indesign, and to get the correct weight to letters, they have an additional race. Now, I want to want to send this to be cut for a sign, but surely he will ignore the outline. How can I create a vector I which includes the area