M93z - time change

Similar Questions

• After travel or time change, capture image downloads new pictures

  I do not erase the cards immediately after the transfer of photos to my computer. Sometimes I'll use a card that has files that it contains are three months to one year, but which have already been uploaded to the images folder. After the "spring from here" and "fall back" time changes, when I use Image Capture to transfer images I've done since the last download, it also downloads the 'old' still once, change the time of the capture of an hour and adding a space and a '1' at the end of the file name. I do not change the time in my camera for changing the time twice a year, and I leave winter time in the area where I live most of the year. If I'm living in the same place for more than a week or two, I have sometimes, but not always, change the computer's time (or let the computer determine the area according to its location).

  To further complicate things, this also happens if I travel between two time zones. There is in the computer of the images that have been made in Vancouver (Pacific time zone) on May 3, 2015. On May 4, while remaining in Vancouver, I downloaded the files on the computer. Such a created file date shows may 3 at 21:13. On May 10, while in New York City, I downloaded images made in New York on 8 May. At the same time, Image Capture download new images of Vancouver, but shows them as having been made three hours earlier than that shown in the previous (Vancouver) download. Very probably, at this time, the computer has been set to automatically set the time zone according to the place or I reset the area because I was going to be in New York for several months. Below a screenshot shows this.

  Of course, this duplication takes twice the storage space. This means also having to spend time to throw the double copies. Or triple copies, sometimes quadruple copies, if the memory card contains pictures that spans two or more changes seasonal clock.

  Is there a way to avoid this? If data in the camera exif photo has not changed, why the computer would have any idea that the official time (or time zone) was different?

  Thanks much for the ideas you may have.

  Leonard

  

  Is there a way to avoid this? If data in the camera exif photo has not changed, why the computer would have any idea that the official time (or time zone) was different?

  Photos will use the time current system as the time to interpret the timestamp on the pictures in the camera.

  If the camera time is different from the time of your system, it makes it easy to import, if you set the area of working time in the preferences system at the same time basis as the camera before importing new photos.

• sampling time changed the buckle timed

  Hello world

  I use the timed loop to control the DC motor with the vi of PID. in the loop and the sampling time are defined as 0.01 s. However, after I added a few other screws in the loop, for example, writing of measure file.vi, to collect the errors between the angle and the practical perspective of the engine for the time histroty the movement of the motor, we find that the sampling time changed, not always 0.01 s before the vi has been added, but 0.01 or 0.02 s. the entire program desinged to be fininshed with 7 s, now's done it at 9.4 s, that is, execution of the loop time is extended.

  Another thing is, if the sampling time is defined as s 0.05, the sampling time is always 0.05 s and the execution time of the loop is always 7 s as predined, regardless of writing custom file.vi is added in the loop or not.

  As a result, I think that if the complexity of the loop is incresead and time of sampling sets is small, then the actual sampling time will be modified due to the design of things load in the timed loop. What is the reason? If so, are there methods to solve?

  It is important: the collection of the angular error of the engine in the time histrory is very important, which will be used to show the correctness of the settings KP, KI and KD.

  A friend suggested using the queue vi, but I don't really know how to use them. Can someone give some instructions?

  Thanks a lot!

  See you soon

  Cram features in a timed loop is like stuffing 5 books you know that in a book bag 3. The timed loop is only really practical on a rt system, but even in this case, if the code inside requires more time than the period of the loop, there is no magic that the loop can do to increase the execution time. Just point out you that the loop is late. The solution is to remove features from the inside of the loop. Writing to a file of measure is one of the worst if you write to a text file. Look at the producer/consumer model of design that you have examples of. There, you will have a normal loop that you will write to a queue, and a second loop will process data in the queue. Use file > open...

• is there a log of time changed under xp?

  Nice day

  I need check time date changes.
  In windows 7, I can do this by using the event viewer, but in windows XP, the event viewer does not record the change of time

  Where can I find these data.

  Kind regards

  Nice day

  I need check time date changes.
  In windows 7, I can do this by using the event viewer, but in windows XP, the event viewer does not record the change of time

  Where can I find these data.

  Kind regards

  =====================================
  The following links may be worth a visit:

  Time change captured in the log of events - event 577 and 520
  http://www.stevebunting.org/udpd4n6/forensics/timechange.htm

  How to check if auditing is enabled & how to turn on
  http://www.windowsecurity.com/EventLogScan/auditing.htm

• Time changes after restart System

  original title: clock issues

  the date and time on my pc should be set every day because it does not, how can I fix

  Hi steve. INA,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If the previous step fails, then you need to check if the time changes system even in the system Bios after the computer restart.

  You will need to consult the computer manual to find out how to start the system Bios or contact the computer manufacturer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• once disconnected when I try to log on to my computer using a temporary profile, this has started to happen since the time change, can someone help me

  The night of time change my backup computer shutdown and using a temporary profile once I disconnected. I can still see my pic and music Exchange reacently file but I want to turn my computer off when you are not using it and record what I saved on the computer the last time.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/947242/en-us

  It will be useful.

• Why my calendar and time changes each time I have logoff my computer

  Original title: Date/time

  Why my calendar and time changes each time I have logoff my computer? Sometimes, it will change a year totally false and an incorrect time?

  It could be the button for the CMOS battery.

  A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.

  It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.

  Generally, the battery is a watch battery "CR2032", about the size of a nickel.

• IDS 4215 date and time change after restart

  Hello

  I am facing problem with cisco IDS 4215 (version 6.0), date and time of change in the device after reboot. What is the command to save the configuration. record or write mem does not work.

  Amarjeet Singh

  Once the date and time changes are applied Cisco IPS CLI, they should have been saved. No additional step of "savings" manually is necessary.

  Also, have you thought about Configure NTP on IPS server. IPS synchronizes time with NTP server, if there is no difference.

  I suggest you contact Cisco TAC and report the problem of equipment.

  Kind regards

  Sawan Gupta

• Daylight Savings time has elapsed - emails planned times changed?

  This weekend is over to Daylight Savings Time. I got an extra hour of sleep! Today, when I checked my campaigns in E10, I noticed that scheduled on all of my emails nurture has changed. This weekend, the planning time was Tuesday - Thursday between 10:00 and 15:00 central time. Today, the programming time is Tuesday - Thursday between 11:00 and 16:00 central time.

  Has anyone else has this problem? I was wondering if it was just me or if it happened to everyone as well.

  From what we can tell, Eloqua may adjust their servers for the time change, but this does not mean that they adjust the time periods applicable to your work. I work with them to adjust their schedules to be in harmony with our first direct go set up.

• Performance graphics problem because the time change?

  Hello

  It seems that there is a problem with the graphic display of Performance on my system (vsphere 4.1 esx 4.0 servers) from 31. October 2010. I suspect it has something to do with the time change that occurred last Sunday night in my area of time (time Switzerland).

  (1) in time real Perfomance data are displayed on the VM and ESX Server objects.

  (2) any other array performance (daily, weekly, annually) fails to display

  If 3) use graph custom, I can go back until 1 November (until today), but not yet back. This is why I think it has to do with the time change of last Sunday.

  When I look at stats.log, there are error messages as in the txt File attached.

  Any ideas? It is not tragic if the old performance data are lost... were put in place with a new DB in September... but I would like to see in the future the performance stats...

  Here a KB for this issue: http://kb.vmware.com/kb/1030305

  To work around the problem of time atothr, you can try to use "Advanced" on the performance tab reports.

• TDMS of MDF time stamp conversion error / storage date time change

  I fought it for a while, I thought I'd throw it out there...

  Let's say I have a file TDMS which has a channel of labview time stamp and thermocouple 2.

  

  I load in DIADEM, I get this:

  

  Perfect!  But now let's say I want to save the PDM as a MDF file so I can see him in Vector sofa.  I right click and save as MDF, perfect.  I started couch and get this:

  

  The year 2121, yes I take data on a star boat!  It seems to be taking the stamp of date/time storage TDMS as starting point and adding the TC_Timestamp channel.

  If I change the channel of TC_Timestamp to 1, 2, 3, 4, 5, 6, 7 etc... and save as MDF, I get this:

  

  Very close, 2012!   But what I really want is what to show of the time, it was recorded what would be the 10/09/2012.

  The problem is whenever I do like recording, date storage time is updated right now, then the MDF plugin seems to use it as a starting point.

  is it possible to stop this update in TIARA?

  

  Thank you

  Ben

  Hi Ben,

  You got it right that the MDF use written the time of storage to start MDF that is updated by DIAdem when writing time. We are working on this and will return to you, if there is no progress.

  To work around the problem, you can try convert TDMS MDF in LabVIEW storage vis.

  Something like the following, you can write your start time of measurement to the MDF file.

  

  Hope this helps,

  Mavis

• Server Active Directory 2003. BIOS has caused the time change in members AD. Synchronize all closed and locked to certain services.

  A MS tech got sent here, but not sure that this is the right place to ask.

  So a client a little slow down in 2003. Yes, I know they no longer have the PDC and BDC, but I will use these terms to make it easier to explain.

  PDC still in place. Most work after changing the time of return. I would just deal with the BDC as an orphaned domain controller and remove it manually.

  If I do this, it will bring the PDC back online as a working domain controller. I'm not going to add back the BDC. PDC holds all the rolls. When I run the command repadmin /showrepl, I get the message that too much time difference between servers, so that replication has been stopped. I also noticed that anonymous log and other things have been disabled. I've seen a lot of docs on how to force replication, but I'd rather just remove the replication partner.

  Again, someone knows if this will allow the RPC server and other accounts that have been closed to limit the damage. Do you need the RPC server to clean up metadata when you remove a server manually with ntdsutil?

  Thank you, any information that would be useful is appreciated. Lyle

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Date and time change on startup Vista Home Premium.

  Whenever I start the date and time have been changed to January 1, 2007; 12:01. therefore I can't access a secure site.

  If you set the right time, then the next time you turn it back on it has revenir la-dessus a change changed to 2007, read this:

  You probably have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• date and time change 3 years ago without getting

  my Vista computer and a processor amd has changed the time and date of 3 years ago and stops at day etc. I put manually the time to correct the problem. This happened 3 times and made by himself. I checked my time synchronization to update the time automatically, but why my computer change the time at this earlier time? If others have this problem could you help me with this problem. I use kaspersky lab 2010 IPSec as well. This problem does not occur whenever I start my computer, but it did this morning, and I ask if there is a problem of security. Thanks for any help you can get.

  Probable reason: you save the battery is "turned".
  Please it in your maintenance of reliable computer rooms of new battery shop.

  t-4-2

• Windows 7 "do not have permission" - Internet Time - > change the settings

  I have Windows 7 Pro 32 bit installed on my laptop. I have only one configuration of account which I am the administrator of the computer.

  When you try to access the control ' Change settings ' to 'Date and time'-> 'Internet time' I'm stuck with the following message:

  "UNABLE TO CONTINUE - you are not authorized to perform this task." Please contact the administrator of the computer to help. »

  What is happening and how to fix this? It seems a little silly that I as the administrator have blocked access to this.

  Your thoughts and your advice on this would be appreciated gratefully.

  Thank you

  Matell

  Matell salvation,

  Welcome to the Microsoft answers site.

  Step 1:

  First of all, I suggest that you enable the default administrator on the computer and check.

  To activate the default Administrator account, follow these steps:

  1. Click Start and type CMD in the start search box

  2. right click on CMD in the list and click "Run as Administrator"

  3. type the following command: net user administrator / Active: Yes

  If it works then it could be a problem with the damaged user profile, go to step 3.

  Step 2:

  I suggest that you turn off user account temporary on the computer and check if you are able to change the time settings on the computer Internet or not.

  1. click on start.

  2. click on Control Panel.

  3. click on user accounts.

  4. click on change user account settings.

  5. drag the slider to never notify.

  6. click on OK.

  Now check if you are able to change the settings, if the issue is resolved, I suggest you turn back to normal user account settings.

  Step 3:

  If the problem persists, I recommend that you temporarily disable the security software and firewall in the security software on the computer and check.

  Make sure that you enable the security software on the computer.

  If the problem persists, I suggest that you create a new user profile on the computer and check because this could be a problem with the profile of the user.

  Check out the link to correct the corrupted profile: difficulty a user profile is corrupted:http://windows.microsoft.com/en-XM/windows7/Fix-a-corrupted-user-profile

  Let me know if it worked.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.