m9400t: failed to get sorround audio output audio over HDMI, stereo only

Similar Questions

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• 8530p - No. 5.1 channel audio on HDMI

  Has anyone got anything else than 2 channels of audio over HDMI on the Elitebook 8530p? I tried different drivers directly from ATI and HP. I tested it on Windows XP x 86 and x 64 Win7. Windows always lists the configuration of stereo audio channels 2 channels. Is this a limitation of the hardware?

  Hi again,

  I don't have a 5.1 system to try to simulate your with on problem with my Probook s 4540.

  However, I did dig a little deeper and found that someone had a similar problem on this forum a year ago. They were able to find a solution that might be useful for:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/No-5-1-channel-sound-output-via-HDMI-only-2-ch-output-why/TD-p/460841

  Good luck!

• Satellite L650-PSK1JE - can't get 5.1 or audio - stereo only

  I have the Toshiba Satellite L650-PSK1JE with radon mobility 5650 and is connected via HDMI to my receiver sony
  whitch is then by an another HDMI connected to the TV.
  Problem is that I can't get 5.1 or quadrophonic sound cell phone, stereo only.

  I tried installing drivers from TOSHIBA web site, as well as pilots from other sites (old drivers everi time deleteng) and still can't make it work. Currently have the drivers ATI 12.6. and audio drivers conexant official.

  In his propertis it says that the maximum number of channels is 2. But in manual graphics card it says that it supports up to 7.1 via HDMI.

  Funny, it is only once (but only once) a surround sound worked, and I had the choice to select 5.1.

  Is it possible that I need to do something with mid sony DH520 Receiver.

  > The problem is that I can't not quadrophonic sound notebook, only stereo or 5.1.
  I have not experts for this, but, as far as I know in the last Toshiba m gave portable computers with optical audio port (red light inside the sound output port) and it was possible to get 5.1 activation option in the sound settings 5.1. Toshiba has offered this Qosmio and some Satellite laptops.

  Out of curiosity: are you using the original pre-installed OS that you got with your laptop?

  I want to buy the Pioneer VSX-S500 so it's very interesting for me to know if you will be able to make it work properly.

• How can I get my audio to work on PE4?

  I have a new computer and PE 4 was installed on it, but I hear the audio.  I do not in my imported videos, audio files or on my calendar.  Anyone know how to get the audio to work?

  First of all, do you not hear Audio in other programs on the computer?

  If so, head down this response. If not, then you will want to ensure that your Audio settings in the operating system and possibly console the sound card are properly first.

  If you have Audio, look at the toolbar at the top of the EP and click on modify. Here, go to Preferences > Audio Hardware.and choose settings ASIO. This will bring up a dialog box and you must place check marks in your list of DirectSound Audio output Port cards and the list of ports of entry.

  Reference in sync, the DirectSound input option button must be set (right part of the box), and map Options, Full Duplex controlled.

  While you're there, check as to what your Audio card is, where we have need more problems. She also pays get the latest driver (it can change each week) for your particular card.

  Good luck

  Hunt

• I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.  Can someone please?

  I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.

  Everything seems to be fine as Photos, music and home movies etc, which all are thinner, it's just the DVD playing in the slot of the iMac.

  Can someone please?

  DVDs have been blocked since mirroring due to copyright

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• where can I get the audio drivers for IBM model 8434PA4

  Original title : my audio driver where can I get the audio drivers for IBM model 8434PA4

  Hello

  need to answer,
  where can I get the audio drivers for IBM model 8434PA4?

  Hello

  What operating system is installed on the computer?

  I suggest you to check out the link next to the Web IBM site to download the audio drivers.

  http://www-947.IBM.com/support/entry/portal/downloads

  Choose the appropriate model before download the drivers. You can also contact IBM support for assistance.

• I have my Toshiba computer connected to my TV via HDMI. Video works fine, but I can't get any audio.

  I have my t.v. from tom toshiba satellite connected via an hdmi cable. Internet and work video grat. I can't get the audio signal to the TV.

  Hello

  To add a bit to the excellent advice of RajithR:

  You can check with the help of Toshiba, their documentation online and ask in their forums
  on the problems known.

  How to activate Audio via HDMI
  http://www.MyToshiba.com.au/support/items/FAQ/316

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  With the help of PC Audio on HDMI
  http://www.brighthub.com/computing/hardware/articles/27727.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot get DTS/multi channel audio via HDMI

  Hello
  I'm trying to connect my VAIO SVT15112CXS to my Bravia HDTV via HDMI to get multi-channel audio (DTS/DD) from my Bravia HT (connected to the TV via optical) with no luck at all.

  I have the same setup for PS3 works well, is it cable or equipment.

  I have already updated all the drivers.

  When the TV is not connected I don't get an Audio HDMI option in the playback devices (I checked to show disconnected devices / disabled) and when it is connected I do not get an option to change the configuration of stereo speaker.

  This way I get only Stereo sound.

  I tried passthough HDMI via ffdshow config (installed K-Lite codec pack) and there is no sound in this way.

  Is there a solution? something escapes me?

  Thanks to all in advance,

  Thanks for your time and your response.

  I got it actually work! updated drivers audio and video (not Sony ones sugested, but later of Intel and Realtek) and now I have everything works as it should.

  The only minor problem is that Vaio Care now wants me to go back to the previous version of the driver, but I'll just ignore it.

  Everyone, try this if you experience this problem.

• How to play a sound through computer speakers when the HDMI cable is used as I can't get the audio content

  I have a desktop monitor and an Alienware Alpha I bought recently, which of course is not a speaker. I use a HDMI cable to get the video of the Alpha on the screen, but when I plug the HDMI on my monitor I can not any audio to the fate of the computer speakers. In the Alpha settings, when I try to switch the audio in HDMI mode, it is said that the HDMI is not connected or incorrectly connected. Any help is appreciated. Thank you.

  I'm not quite familiar with the Alpha console, so I can only suggest to visit their support page where you can chat with an expert.

  I hope that you can solve your problem.

• Unable to get any audio from webcams built in mic

  I still can't get audio of my webcams built in mic, I have Windows Vista Home Basic desktop Dell 32 bit, I went into Control Panel and click on hardware and audio and I noticed that one of my card drivers sound is missing it was a microphone icon and he disappeared. I have an old microphone that I connected to microphone before and I did a sound check and it works very well and when I try to use my new webcams built in mic a pop up and it is said (cannot create audio filter). I made no changes to the computer, all my drivers have been updated. The name of my webcam is Gear head 5.0MP HD I tried everything to get the audio from webcams to work, I also made sure the mute was off and she was not dumb.

  Now I know not which driver was missing as far as I know, it's a microphone that was present in the recording tab and he had a microphone and then icon the next day, that the driver had disappeared, I thought to go to the Device Manager, but I don't know which driver it is on and how to reinstall the driver.

  I don't really know what to do and how to solve this problem, can you please help me.

  So thank you for your time

  On the sound, the record tab, tried to right click on the device, and then click 'Show damage disabled' or ' Show disconnected devices? If your microphone has shown, you can set as default.

  To access the recording tab, right click on the speaker icon on the tray (Notification area), in the context menu that appears, click on "sound".

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

• Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  Hello

  I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

  "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  I tried to look for a solution, but I did not understand what Live Meeting I need to download.

  Can you help me?

  Thank you.

  Original title: Live Meeting 2007

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

  FAQ: Live Meeting related topics media

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Message to the computer startup «failed to start the audio driver of Dolby.» Please restart your computer or reinstall the driver if the problem persists ".

  Original title - help help help me please

  why I opened my computer it appears a message that "failed to start the audio driver of Dolby. Please restart your computer or reinstall the driver if the problem persists ". and I could not open Windows media player. What should I do now? who can help me please?

  Hello

  Go Device Manager... Sound, video and game controllers, and see if you have triangles yellow error next to your audio devices...

  My guess would be that you need to update the drivers for your audio devices.

  You should be able to find the drivers + Support Web site for your computer model...

  If not, find the number\model Audio chip and watch there chip manufacturers website for updates...

  I don't know if the audio problem is a single chip, or is part of your graphics device...

  If you don't find anything wrong in the audio, you can check that.

• When I drag my clip in my calendar, there is no audio that comes with it, even if it is supposed to be. How can I get the audio?

  When I drag my clip in my calendar, there is no audio that comes with it, even if it is supposed to be. How can I get the audio?

  Make sure your Source patch and the targeting of the track are set correctly:

  

  MtD