Mac OS 10.5.8 and OfficeJet Pro 8600

Similar Questions

• How legal sheet and officejet pro 8600 fax

  How do fax you a legal form on officejet pro 8600?

  He has not worked for me; There are no settings on the bottom of the screen after using the ADF.  However, what works, it was to set up the legal size in copy mode before faxing.  But thanks a lot for the advice anyway.

• OfficeJet Pro 8600 - Macbook Pro and Macbook Air does not print

  Products:

  • HP Officejet Pro 8600
  • MacBook Pro (Mac OS X, Version 10.7.5)
  • MacBook Air (OS X, Version 10.8.2)

  Question:

  • Why my Mac initially print fine, but now will not print?

  Full article:

  I have a wireless network in my house that consisted of a 30 MB cable internet, Netgear 900n, HP Officejet Pro 8600, 2 laptops from Dell with Windows 7, a laptop Lenovo with Windows 7 and Dell with Windows 7 trick, all printed matter very well.

  The HP Officejet 8600 was added to my network about 2 months ago.

  I added a Macbook Pro and Macbook Air about 3 weeks ago.  The two Macs printed fine for about a week.  Then suddenly they stop.  I spent about 2 hours on the phone with HP's Service, and finally, they said to my router.  So I called Netgear.  NETGEAR was useless!  They wanted me to accept fees for services before they would even discuss the issue.

  As a result of information provided by the HP support service, and because Netgear will not support their product, I quickly bought a new router - an Apple Airport Extreme.

  Macs will recognize the printer will print if connected via a USB cable, but do not print wirelessly on the Officejet Pro 8600.  The fine impression CPA.

  The frustration that is felt is made up by the fact that Macs printed very well with the Officejet Pro 8600 2 weeks and now the printer shows just "idle"... even with a new router. (see image below)

  Please help, thank you very much for all support.

  As a side note, the representative of the HP Service was very friendly and definitely tried to support the HP product, which is much more I can say about Netgear.

  Thank you

  

  Hello

  More likely a problem with Multicast, which Apple devices are relies on to communicate with the device through the network.

  First try unplugging the router for 30 seconds.

  Connect to the power supply and wait 2-3 minutes.

  Turn off the HP printer and turn it back on, then check all difference.

  If it persists, try to change the configuration of your router as follows

  Note: the settings below are not related with the HP product, I provide you with the steps as a best efforts and those based only on my own knowledge. You can try to change the settings of the router at your own risk:

  1. Open the router configuration page (you'll find listed as the default gateway by clicking the icon on the printer wireless, then print a network configuration report.
     
  2. Click the Advanced tab.
  3. Click the configuration option in the menu, and then click Setup WAN.
  4. Be sure to uncheck the box Disable IGMP proxy transmission and apply the changes.
  5. Click on the LAN configuration on the same Setup menu.
  6. Set the RIP RIP-2 Version and apply the changes.
  7. Restart your router and then check any change.

  I hope that you will find useful information, you can also use the guide to the user below for more information:

  http://www.downloads.NETGEAR.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.PDF

  Shlomi

• "Officejet Pro 8600' vs"Officejet Pro 8600 N911n"

  When you set up several programs or applications, I am presented with a list of available printers found. I have attached to my router as a network printer, a printer, a premium of Officejet Pro 8600, but still these two entries in the list: 'Officejet Pro 8600' and 'Officejet Pro 8600 N911n. In addition, the printer web interface shows "HP Officejet Pro 8600 N911n"

  It is in the browser Chrome on PC you see two printers? This means that one of them if the printer is installed on the PC and the other is the google cloud printer (which corresponds to the printer even physically). The difference is, if you select the printer of cloud, it will be probably slower (jobs sent to google cloud and then back down to the printer).

• HP Officejet Pro 8600 N911g can't always print and scan after turn on Mac from sleep

  Dear community:

  It's my printer:

  1. number and product name
  

  HP Officejet Pro 8600 N911g product name product model number product CM750A the serial number {private information deleted} ID Service 23022 Firmware Version CLP1CN1150CR Total number of pages 4187

  2 operating system installed (if applicable)
  Mac OS X 10.7.5

  3. error message (if any)
  

  After several problem that prevented me print I uninstalled all the HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro - 8600_v12.23.0.dmg after full I can print and scan. then I go home and put my laptop to sleep. After that I go back to work this morning I cannot print and scan again. HP utility impossible to connect to this printer because all of the information here (all fields) will appear as: unknown please help.

  4. all changes made to your system until the problem occurred
  Nothing. I just put my Mac to sleep and then back on.

  5. in the title of the topic, include a brief and accurate description of the problem and your product information (e.g., product name of your laptop, laptop computer, printer and other device, etc.)
  

  After several problem that prevented me print I uninstalled all the HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro - 8600_v12.23.0.dmg after full I can print and scan. then I go home and put my laptop to sleep. After that I go back to work this morning I cannot print and scan again. HP utility impossible to connect to this printer because all of the information here (all fields) will appear as: unknown please help.

  Is there someone out there who has an idea on how to solve this problem? Thank you in advance.

  Try scanning with picture Capture in your Applications folder.  Click the scanner on the left, click View details in the lower part to reveal a bunch of settings on the right side.

• HP OfficeJet Pro 8600: Scan - disable the 'Save' button with MAC OS 'SIERRA '.

  Hello world

  I have an Officejet Pro 8600 installed in a Macbook pro.

  After having upgraded to Mac OS Sierra (10.12) 'Save' button in the HP scanning software is now disabled when the save screen appears. Save documents are possible using the 'Test' option in the menu "Preferences".

  It worked fine with the latest version of 'El Captain'.

  I've searched for scanning HP new version for Mac OS Sierra, but nothing.

  Someone has any idea how to solve this problem?

  TKS in advance.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• OfficeJet Pro 8600 D949CA: Scan of Cant to PDF after upgrade Mac Sierra 10.12

  Just upgraded to mac Sierra 10.12 and now scan to PDF to the computer does not

  error: "a required software component is missing or damaged. Please reinstall the software for your device and/or check your hard drive for problems. »

  Then I downloaded the latest version of the driver, but when I click on HP Utility & Scan to computer it gives error

  "Software required for the scan of the computer could not be located on this computer.

  simple scan software can not find him as either

  but disk utility works insofar as I can print on printer

  Summary:

  I installed the latest driver after upgrade to Mac0s 10.12 Sierra

  I can not scan to PDF & send to the computer

  Feature product number: CM749A

  Name of device model: HP Officejet Pro 8600 N911a

  Device serial number: CN34SBXG0H05KC

  Mac OS version: 10.11

  Service ID: 23226

  Hi @orangecowboy,

  Thank you for reaching out to the forums! I understand that you have problems of digitalization in PDF format for the Mac since the upgrade to the Sierra. I'd love to help you.

  Try the following steps to see if they will solve this problem: Scan network connection is lost (Mac).

  You have the option to allow the scan to computer?

  I have provided a few steps to manually remove all the old software of the printer and reinstall the latest drivers again if you still have problems.

  Here are the steps: Uninstall HP Printer (Mac) software.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.

  Restart the Mac.

  Empty the trash.

  Once connected, repair disk permissions.

  1. On the Dock, click Applications, then utilities.
  2. Double-click disk utility.
  3. Highlight your hard drive / partition on the left (by default this is "Macintosh HD").
  4. Click repair disk permissions at the bottom of the window.
  5. Once the repairs completed, restart the computer.
  6. Restart the computer.

  Install the latest version of the software: HP Easy Start.

  If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!

• OfficeJet pro 8600 work pending complete on Mac

  Hello

  I have the problem where, after printing, the I get the message "waiting for job to complete" which never goes away by itself. I can manually delete the item, and then continue to print repeating the process whenever I need pringt.

  I read the forums and found similar issues but not exactly the same thing and recommended for this to reset the system of printing and the resinstall. I did, but the problem persists.

  Printer: Officejet pro 8600 more

  OPERATING SYSTEM: OS X 10.9.3

  Connection: Wireless and USB (same problem with both)

  When I originally installed the printer it worked fine. When I upgraded to 10.9 it worked fine, but the problem arose shortly after.

  Thank you

  Hello

  Reset of the printer. Went back through the entire installation process, including ePrinting. I was then able to check the firmware - it ws updated.

  Then, I removed all installed printers and scanners. Then I reinstalled the printer using the IP address option on Mac only (it was already fixed IP not DHCP).

  After that, it works. Note that I analysis of the HP app that the scanner does not appear in the Mac printers and Scanners - which is fine for me.

  It's hard to see what makes the difference, but I'd say it's one or more of

  IP, DNS 8.8.8.8 and 8.8.4.4, using IP printer (with HP AirPrint driver option not), have dull ePrinter fixed / apps to implement the same if not used and not to scan that appear in the Mac

  I'm not sure but I will mention to help any other people watching this thread.

  The problem is now resolved, and I now try to mark the thread as such.

• Mac cannot print wireless HP Officejet Pro 8600 Premium

  I have a wireless network of office with some Mac and some PC and an HP Officejet Pro 8600 Premium.   During the initial Setup, the first Mac was able to print fine, but today, he was not able to print.

  Two PC can print wireless with no problems.  Macs are struggling, but it's different for each:

  Mac #1-OSX 10.8.5) printer installed via the installation CD.  He worked for a week, then stopped working today.    I sent a print job, and he was sitting in the buffer always 0%.  He never gave an error, but it has never printed.  Then I uninstalled the printer and added via system preferences and got the message "Unable to communicate with the printer right now" while the installation failed.   However, I am able to navigate to the IP address of the printer from a browser and see all the parameters.  I am also able to scan FROM the printer to this computer, then it is certainly communication he...

  2 mac - OSX 10.7.5) installed system Prefreences without problem printer.  Sent a print error-free job, but he blocked indefinitely in the buffer to 100% and never printed.   This Mac was able to print via USB.

  We are on the same wireless network.  The printer is configured with a fixed IP address.  Any ideas?

  Hello whatkatiedoes,

  I understand your frustration I want to gather some information so that we can begin troubleshooting.

  Did you update firmware for your OfficeJet 8600 Premium? If this isn't the case, I wish that install you this, it was released 23/7/2013 click here to update the firmware.

  Also we will go forward and restore the default network on your printer, go to the front panel of your printer and follow the steps below:

  Menu Configuration > Tools > restore default settings

  Now that we have a 8600 OfficeJet updated premium and have restored the default values. I want to you now to connect wireless using the Wireless, Setup Assistant which is also found in the front panel of your printer. Steps listed below:

  Menu Setup > network > Wireless Setup Wizard

  Once these steps have been performed, you can now try to re run the installation software. Here's the direct link for HP Officejet Pro Full Feature software and driver - Mac OS X 10.8. Please let me know the result and if it was successful, I hope to hear from you soon.

  Thank you

• Unable to scan from my HP OfficeJet Pro 8600 Plus to my Mac iOS 10.10

  Just bought a new Mac and execution of Yosemite. Tried to add my 8600 and it prints but will not scan. When you try to scan to the computer, a message "the HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/support and then try again. "When I followed the link, he directs me to download the driver again... and the beginning of the cycle. I tried to uninstall completely while following the previous suggestions in the forum, but nothing did.

  I'm a new Mac user, but just can't understand why it would work on my PC and not the new Mac.

  Hi castagmc,

  Welcome to the HP Forums.

  I see that you experience a problem when you attempt to get the new Yosemite driver installed for the printer.

  I have some suggestions that we can try to solve this problem.

  First of all, please remove the cable usb from the printer and Mac and leave that it disconnected until further notice.

  I have a link that I give you which gives detailed instructions for uninstalling the printer software.

  Once the uninstall is complete, reboot the Mac for changes to take effect.

  When the Mac is back running, disable any anti virus protection, you can running. We don't want anything to get in the way when reinstall us.

  The next step is to download and install the HP Officejet Pro 8600 series full feature software and drivers.

  The installation will prompt you as to connect the usb cable then please do not it connect before hand.

  Please do not hesitate to write me again if you have any other questions.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• HP OfficeJet Pro 8600: Download driver for hp 8600 pro for mac 10.10.1

  I have an iMac osx 10.10.1, and I also have a HP 8600 Pro.  I need to download a printer driver but am not finding this info easily (or at all, in fact) on the hp site.  Is there a driver that works on 10.10.1, and if so, where can I find?

  Found very quickly by using the Support link above, registering 8600 in the product search field.

  My MacBook Pro with 10.10.1 prints perfectly on my Officejet Pro 8600

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-125213-3&cc=us&DLC=en&LC=en&OS=4182&product=4323659&sw_lang=

  I will also move this thread to the impression of Mac Board.

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• OfficeJet Pro 8600 - Print margins are off, slow and noisy printing

  I have problems printing my printer HP Officejet Pro 8600. When I am able to print the process is extremely slow and the printer made a lot of noise before and during printing. In addition, the margins are off compared to those on the document itself. The left margin is so great that it is cut a part of the document on the right side. I tried to unplug and restart the device and it is set back to the factory, but the questions remain. I printed a test page and it looks good, but speed, noise and margins continue to be a problem. How can I fix these problems?

  Thank you!

  What you mentioned, it seems that something is happening with the material. Here are two links to try to fix it, please choose the one that corresponds to the computer you have

  Slow printing in Windows: hardware issues

  Slow printing in Mac OS X 10.4 and later versions: printer problems

• How to download pictures from a memory card in the Officejet Pro 8600 Plus on Mac computer

  I want to download pictures on my Officejet Pro 8600 more AIO on my Mac Mini computer from an SD card. With my old 6310 AIO, it was easy. Now, the only option I can find when I insert the card is to be printed.

  Help, please!

  Please specify,

  Please follow the steps below to map a network connection to the SD card. This should be done once.

  1. Click the icon at the top of the screen of the printer wireless. Take note of the printer IP address that appear on the screen.
  2. Insert the memory card into the card reader.
  3. In Mac OS, click once on the icon in the finder or on the desktop.
  4. Click on the Menu to go .
  5. Click to connect to the server.
  6. In the server address field, enter smb://ipaddress in the printer and click on Connect.
  7. Keep the name and the password and click on Connect, configured
  8. Select the MEMORY_CARD volume, and then click OK.

  The content of the memory card and you can also find that it listed under the computer in the future.

  Kind regards

  Shlomi