Mac Pro-connect on two private subnets

Similar Questions

• Problem with Dell P2715Q and Mac Pro connection

  I have a Mac Pro 2013 with AMD 500, 64 GB RAM graphic card.  I just bought a pair of monitors Dell P2715 Q 4 K after using my 30 "Apple Cinema Display for many years.  Monitors properly function while I actually use and I can manually put the system to sleep (using the option-command-eject) and I'm able to wake the system by pressing the keys on the keyboard.  They work in 60 Hz mode UHD (3840 x 2160) and are connected with the display port (Thunderbolt) mini display port cables with that monitors came.  They are connected to two of the three bus TB. The problem is that when I restart the computer (or stop and start up), the monitors will automatically in their 'power save mode', and the Mac Pro does not seem to recognize that they are there, trendy, so I get two blank screens... no way to connect, because there is no current login screen.  The only way I can actually connect and begin using the computer is to connect an old 23 "Cinema Display, connect, and then connect the two valleys and unplug the 23". Yes, I can leave the computer and he just put the system to sleep, but when I need to close for a software update or the failure, I won't have to drag another monitor comes to start using the Mac Pro.  I have 27 days to return if necessary Dells.  Anyone have any ideas on how to solve this problem?

  That Mac has made recognition of the display for a long time consists of sending a query to display at certain times, by asking, "what is your name, and what are your skills? If these screens are asleep, they fail, and then they stay dark.

  These times are:

  shortly after the market.

  upon awakening from sleep

  When inserting the cable end Mac

  Since the Option-(detect poster) button in the display panel.

  Perhaps there is another way, you can arrange to have the display be awake when the Mac it sends the request?

• 2006 mac Pro connected with a fiber patch cable

  I want to connect this cord of fiberto my Mac Pro in 2006, is a PEX1000MMSC would do the job or you recommend something else?

  I don't know why you are asked in the iMac discussion area. I asked the moderators for your message to the Mac Pro chat room.

• MAC PRO CONNECTION ISSUES NOT IDENTIFIED

  So, I had serious problems with lag (ping spikes connection) on my computer.

  I use Mac Pro (mid-2010), and I used the 'ping - i.2 192.168.0.1 sudo"command in a terminal to monitor my ping. My ping stays constant at 1ms - 3ms, but always rises to 100ms to 200ms every 6 to 15 seconds. And these "spikes" happens literally every 6 to 15 seconds, but it's not crazy to ping 1000 or even above.

  The difference strikes me much since I play overall infringement of counter-strike on mac, which the PPE ping can be clearly felt.

  The strange thing is that I'm not under any program that downloads or downloads and the offset ONLY HAPPENS in THIS COMPUTER SPECIFIC. The offset can't on my laptop and all. What is going on? My speculation on this issue is probably my computer seems to be sending files or signals a, and that's when the ping comes up, but I just can't understand what is happening.

  The connection USED TO BE FINE. Is this a problem with features hidden in my mac network or what? I was about to try to disable the SSDP service, which seemed to be the cause of the delay of a few of my friends, but I don't know how, since her pimp.

  Any help would be really really really appreciated.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Xserve/Mac Pro connectivity?

  I was wondering if I could use a Mac Pro as part of a setup of the Xserve. IM thinking as an installer of the Xserve from would increase good expansion capability than a Mac Pro and a NAS/SAS (Im most everything about Apple products)

  Maybe something like one of these Apple Xserve RAID units and perhaps one of 3 bays farm

  

• Mac pro connected to the imac book

  I would hang my book mac pro on my imac and screen sharing, I can?

  Hello Mc-Irish,

  I'm not quite sure what you're trying to do, but lets see if we can get for you that works.

  To me, it seems that you try to use your iMac as a second screen. If this is the case, take a look at the article below for the requirements for the use of your iMac as a secondary screen on your Mac. Make sure you have a cable Thunderbolt or mini display depending on how the MacBook Pro specifications

  Use your iMac as a display with the target Display Mode
  https://support.Apple.com/en-us/HT204592

  I would like to know if that's what you're trying to do, or something else entirely.

  Take it easy

• Mac Pro (6.1) Multiple of VM

  I vSphere 6.0 esxi installed on a Mac Pro hosting 2013 two Yosemite 10.10.4 vm. The problem IM having is that I can't run both at the same time. If I do, they lose the connection to the host and I have to restart the server.

  The virtual machine is only using 2 processors, 2 GB of Ram and 128 MB graphics memory.

  Any ideas?

  
  Thank you

  Hey Wil,

  It has proved to be a problem of port security in my environment of the company. They do not several assignments of ip to a port. So I had to move the esxi host to a new location, and I was able to run several virtual machines at the same time.

  Thank you for responding and willing to help out, I really appreciate it.

• Unable to connect more then 2 monitors for Mac Pro end of 2013

  I was wondering if anyone had this problem and found a solution.

  The Mac pro (end 2013) model that I have would not work with 3 or more screens, little matter what I do. Even if him are all connected to separate buses. Only 2 would work at any given time. When I cut the work one, one nonfunctional lights.

  They are related:

  Computer-> Thunderbolt to HDMI-> monitor

  Computer-> Thunderbolt to HDMI-> monitor

  Computer-> monitor-> HDMI/DVI

  Setting up and connecting cable is not a problem here, because I tried a lot of different ways to connect with different types of monitors.

  Just replaced a new video card and the problem still there.

  am I missing, or hurt?

  any idea is aprisiated!

  Thank you!

  OS X El Caplitan

  10.11.6

  2.7 GHz 12-Core Intel Xeon E5

  64 GB 1866 MHz DDR3 ECC

  AMD over-pants D700 6144 MB

  Mac is unable to produce interfaces to more than two screens "legacy" levels of tension necessary to keep them from dropping out. You need an ACTIVE adapter for some of these screen to run more than two (including the interface HDMI built-in, that counts as if connect you something). poster "legacy" is other than DisplayPort and Mini DisplayPort

  Adapters ASSETS have re-drivers of signal in them, that's why they are more expensive. As long as you stay under 1920 wide, you don't ask the very expensive adapter Apple DVI Dual-Link, $ 100.

• connecting the iphone 6 with the Mac Pro for messages

  My iPhone 6 is not bind properly with my Mac Pro for Messages.  When sending a message from the Mac Pro, the message will be displayed on the iPhone immediately, but this is not always appear as "sent" or "delivered" on the Mac; It just shows an incomplete treatment green line at the top of the message on the Mac bar.  This occurs only with SMS messages.

  I followed the instructions to connect the two devices using my Yahoo account, but it still does not work properly.

  Any ideas?

  Make sure that your iPhone software is up-to-date.

  Tap Settings > general > software update

  The latest iOS version is 9.3.4.

• How can I connect Mac Pro (17 inch, late 2011, a typical computer screen.)

  I would like to connect my Mac Pro to a monitor, so I can see two screens.  Don't know what to use.

  Mac pro is a desktop computer has a video card.

  the Mac pro 2011 17 "book is a portable computer with a Thunderbolt port

  you need a lightning to VGA, DVI or HDMI everything that supports the monitor at the other end.

• Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  I'm your pain ptapp!

  Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.

  All 4 of my devices constantly ask my password because of some problems with xyz account.

  Then I enter the password only to be told that iCloud cannot check my password.

  Then after several repetitions of this I get locked and have to go to the site apple id to change my password.

  I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.

  Apple needs to fix this problem, if they have any idea how to.

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• How to connect a Dell's VGA screen to my Mac Pro with cinema display 27 inches

  I have a Mac Pro with a display of 27 "cinema, and I want to connect a VGA Dell monitor I have laying around. I want to have two monitors to my larger work. How can I do this? What should I do?

  Hello esala23,

  Thank you for using communities of Apple Support.

  I see that you want to connect another screen on your Mac. You will love it, it's the best thing that I have to make my job easier and more efficient. Take a look at this article to get started with a second screen on your Mac Pro.

  OS X El Capitan: connect multiple monitors to your Mac

  You don't mention what model Mac Pro, but assuming that it is the most recent, this article can be useful:

  Use multiple screens with your Mac Pro (end 2013)

  Best regards.

• How can I connect a firewire camcorder to my Mac Pro mid-2010?

  I have a good Sony TRV900 camcorder which connects via Firewire, so how do I connect it to my Mac Pro mid-2010, which has no firewire connection? (I need to be able to transfer data from the Ribbon mini-DV camcorders for editing in Final Cut Pro)

  https://support.Apple.com/kb/SP589

  "Four ports FireWire 800 (two on the front and two on the rear panel).

  http://www.sonnettech.com/product/fw_adapter.html

• Cannot connect on Mac Pro SSD because El Capitan is missing?

  I have an old 3.1 Mac Pro with an SSD for the main drive and an old HD Lion v10.7.5 for legacy applications and files running. The novelty is that I can not connect via the SSD, BUT, the good news is, I can connect to the computer through my old HD. It was El Capitan installed 10.11.6. The SSD still has its demands, but they cannot be opened with Lion, so this seems to imply that El Capitan is missing.

  Question: Any ideas on how the SSD 'fixed' so it can be used as the journal into the drive and run the latest applications.

  Reinstall OS X on the SSD