Mac pro connected to the imac book

Similar Questions

• Logic remotely (on iPad Pro) is no longer connected to the iMac GarageBand

  Is no longer able to connect to my iMac using distance, just put logic to update on my iPad Pro. It worked before the update only a few days ago... Not excited about it, however, I find the GarageBand update for iOS very useful.

  Someone else has problems of connection on their Mac or iMac using logical iOS remote?

  A little more info... Looks like my iPad 2 Air is able to connect to the iMac, but not the iPad Pro, even if two iPads running the same version of iOS and have the same version of the logic of distance!

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• Mac pro with monitor Dell P2414H book: how to rotate the image displayed in mode portrait when I rotate the monitor 90 degrees

  I have a mac book pro retina bought in 2014 which I use with a Dell P2414H monitor.

  I bought this monitor because it can turn up to the vertical position ('portrait'), but when I do that the image of the screen does not turn with it.

  I called Dell and they said that it is a problem to solve with Apple.

  Does anyone else have this problem? and it got fixed?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• 2006 mac Pro connected with a fiber patch cable

  I want to connect this cord of fiberto my Mac Pro in 2006, is a PEX1000MMSC would do the job or you recommend something else?

  I don't know why you are asked in the iMac discussion area. I asked the moderators for your message to the Mac Pro chat room.

• Mac Pro-connect on two private subnets

  CNA Pro... running Leopard OSX 10.5,5 with 8Gig memory on-board.

  Running VMWare Fusion 2 with update.

  Need to run across two private subnets...

  10.0.10.XX (en0) IP static set of works DNS etc. for host OSX Mac Pro applications running as FCPro/Protools etc.

  192.168.1.xx (en1) static The IP address defined for comments that XP Professional will host a few apps like Autocad and Mathcad etc must log on Win2k domain as well...

  These are statically assigned IP addresses , as they will be all the time, persistent connections.

  Added 'second virtual network' adapter... both the value "bridged mode".

  Have tried the 'bridge' mode to try to achieve connectivity direct en1 interface across XP Pro. assign a static IP "virtual adapter 2 '...

  (Checked that this scenario seems to work very well on an iMAC, I place last week... opens a session on the Win2K domain... everything works but only single NIC)

  Dave Parsons excellent scripts have tried... VMWare should give the guy a medal! hire a consultant at the same time.

  I have a little more Mac Pro to put in place...

  Question...

  How can I configure vmnet 0, 1 and 8 to work correctly with en1 in bridged mode, if it isn't the right strategy?

  So if I want to add an other "guest" for example machine Linux how could I get it to connect properly on to en0?

  My apologies if this question may seem simple. Just think VMWare should be a simple and easy task...

  Could do the same thing with routers Cisco/ACL etc., then fill the two subnets with material, but that's not the point is it!

  Any assistance received with gratitude and once more a big thank you to Dave Parsons and everyone that make VMWare a "pleasant" experience

  FWIW, I have no problem to use VM@Work Tokamak 2.0.0 to fill two different virtual networks for the 2 network cards physical on my Mac which are on different subnets and have connectivity across two subnets of in Virtual Machines.

  It sounds like you haven't read fully the 'Tokamak.pdf VM@Work' in the or the document Advanced Networking Configuration - Tokamak Networking Scripts for VMware Fusion .  The reason I say it's you haven't mentioned nowhere in this thread that you have changed the configuration the target Virtual Machine's .vmx file to support the changes you made to the virtual network using VM@Work Tokamak 2.0.0 VMware.

  In other words do you have added/changed the .vmx as well? (See 4.0 change comments VMX file in the documentation.)

  Convention:

  .gift Ethernet (n) = 'TRUE '.

  Ethernet (n) .connectionType = "custom".

  Ethernet (n) .vnet = 'VMnet (n).

  Example:

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "custom".

  ethernet0.VNET = "VMnet0.

  Ethernet1. Present = 'TRUE '.

  Ethernet1. ConnectionType = "custom".

  Ethernet1.VNET = "VMnet2.

  If you have done this then in order to resolve this problem you must validate out ifconfig from the Host and ifconfig or ipconfig/all (depending on guest operating system) out of comments and the .vmx config file target VMS to begin with. (It is recommended that you redirect the output to a file on disk and then archive and attach the requested information to a reply post vs just copy and paste in reply.)

  Also why are you fill vmnet1 and vmnet8?  Personally, I recommend to leave the default value for the Type of network for vmnet1 and vmnet8 and add additional vmnet for additional bridged network.

• Problem with Dell P2715Q and Mac Pro connection

  I have a Mac Pro 2013 with AMD 500, 64 GB RAM graphic card.  I just bought a pair of monitors Dell P2715 Q 4 K after using my 30 "Apple Cinema Display for many years.  Monitors properly function while I actually use and I can manually put the system to sleep (using the option-command-eject) and I'm able to wake the system by pressing the keys on the keyboard.  They work in 60 Hz mode UHD (3840 x 2160) and are connected with the display port (Thunderbolt) mini display port cables with that monitors came.  They are connected to two of the three bus TB. The problem is that when I restart the computer (or stop and start up), the monitors will automatically in their 'power save mode', and the Mac Pro does not seem to recognize that they are there, trendy, so I get two blank screens... no way to connect, because there is no current login screen.  The only way I can actually connect and begin using the computer is to connect an old 23 "Cinema Display, connect, and then connect the two valleys and unplug the 23". Yes, I can leave the computer and he just put the system to sleep, but when I need to close for a software update or the failure, I won't have to drag another monitor comes to start using the Mac Pro.  I have 27 days to return if necessary Dells.  Anyone have any ideas on how to solve this problem?

  That Mac has made recognition of the display for a long time consists of sending a query to display at certain times, by asking, "what is your name, and what are your skills? If these screens are asleep, they fail, and then they stay dark.

  These times are:

  shortly after the market.

  upon awakening from sleep

  When inserting the cable end Mac

  Since the Option-(detect poster) button in the display panel.

  Perhaps there is another way, you can arrange to have the display be awake when the Mac it sends the request?

• MAC PRO CONNECTION ISSUES NOT IDENTIFIED

  So, I had serious problems with lag (ping spikes connection) on my computer.

  I use Mac Pro (mid-2010), and I used the 'ping - i.2 192.168.0.1 sudo"command in a terminal to monitor my ping. My ping stays constant at 1ms - 3ms, but always rises to 100ms to 200ms every 6 to 15 seconds. And these "spikes" happens literally every 6 to 15 seconds, but it's not crazy to ping 1000 or even above.

  The difference strikes me much since I play overall infringement of counter-strike on mac, which the PPE ping can be clearly felt.

  The strange thing is that I'm not under any program that downloads or downloads and the offset ONLY HAPPENS in THIS COMPUTER SPECIFIC. The offset can't on my laptop and all. What is going on? My speculation on this issue is probably my computer seems to be sending files or signals a, and that's when the ping comes up, but I just can't understand what is happening.

  The connection USED TO BE FINE. Is this a problem with features hidden in my mac network or what? I was about to try to disable the SSDP service, which seemed to be the cause of the delay of a few of my friends, but I don't know how, since her pimp.

  Any help would be really really really appreciated.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Mac Pro freezes on the screen saver 10.11.5

  Have a Mac Pro and have a problem when the system freezes and locks up and must power cycle back.    He had related app so tested, but also happens with no apps running third and now thinking seems to be related screensaver.  I have turned off the screen saver and will see what happens now.  However, someone else has the issue of the screensaver crashing the OS X on a Mac Pro to 10.11.5?

  No, I have not heard of this.

  You do not all apps of third parties running in the foreground, but can still cause the problem. Boot in safe mode (hold down the SHIFT key when starting) and see if the problem persists when the screen saver is used.

• Xserve/Mac Pro connectivity?

  I was wondering if I could use a Mac Pro as part of a setup of the Xserve. IM thinking as an installer of the Xserve from would increase good expansion capability than a Mac Pro and a NAS/SAS (Im most everything about Apple products)

  Maybe something like one of these Apple Xserve RAID units and perhaps one of 3 bays farm

  

• Can I migrate my 3rd party applications on my mac pro with a new IMac with El Capitan Lion?

  I have many obsolete applications (Final Cut Pro 7 etc.) and applications 3rd party (Ms Office, final version of the project, etc.).  Can I move ALL of my external hard drive, which is a carbon copy of transfer cleaner everything on my mac pro?

  Yes, but they may be too old to work with El Capitan.  Look at RoaringApps.com to see if there is any inconsistency with these applications.

  

• 4600 pro connects to the Linksys WAG354 Wireless router!

  Hello

  I have a Toshiba Satellite Pro 4600 with internal wireless card. I'm trying to connect to my Linksys WAG354 wireless router. The laptop seems to connect but only get a connection status ' Limited or no connectivity "note computer says it has problem because the network has not assigned a network address of the computer.

  I called Linksys, but the call center do not have a lot of help! They said that I should update the driver for the Toshiba wireless... I did that, but still the same problem.

  I am running windows XP. I have two other laptops connected to the router WAG354 and they work fine.

  Any advice would be much appreciated.

  Hello

  I agree with Michael. I think that some false setting is responsible for this. If your network is visible for the laptop, the features of the card are OK and the problem parameters.

• Hi, my HP Photosmart C310b connected to the iMac often loses the print connection

  When I go to print, I get a msg saying "cannot find printer" when everything is connected. It's like if it disconnects after a period of time. I have to completely restart the iMac and go through the tools/network/Wireless configuration wizard... so it works well. Any ideas why this happens? Thank you!

  Here's a video for information on how to set a static IP address on the printer. Follow these instructions and let me know if this relieves the connectivity issues you have.

  http://www.YouTube.com/watch?v=llYNMNKJMX4

  Have a great day!
  

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I have 6 s phone is not connected to the iMac (retina 5K, 27 inches, end of 2014) using bluetooth

  Hi every time I try to connect my i phone 6s with iMac (retina 5K, 27 inches, end of 2014) performances

  connection failure ' jatin iMac is not supported.

  Pls help its strange

  Connect an iPhone to a computer is not supported.  Has never been.

  Bluetooth: Why can't connect my iPhone or iPad with another iOS device or my computer?