Mac with photosmart C4480 problem

Similar Questions

• 5515 with photosmart driver problem

  I have problems to make the photosmart 5515 drivers employment. I am running windows 7 on a toshiba satellite c670.

  Software installation cannot find the printer on the network, even if it is connected and firewall is turned off.

  More disturbing still, the installation software also does not appear to identify the printer when connected via USB, even if the laptop recognizes the usb connection.

  I rebooted all systems, turned off the firewall and checked all the suggestions in the troubleshooting guide.

  I even tried to uninstall and reinstall the driver download.

  All attempts have failed.

  Make me very frustrated.

  I think I finally tracked the problem and hope to have solved.

  The software installation tool has downloaded the wrong version of the driver. It seems I have a d 5515 printer, but it has been download a 5515 driver has that (surprisingly) completely does not work with the d 5515. Once I found it and downloaded the correct driver, things began to work on the USB port, even if wireless connectivity is still not working. I lost confidence to try to resolve this, then goes to live with USB.

  There was no warning or alerts on the incompatibility of different versions of these drivers and driver autoinstall tool has completely failed to address this issue. There was no information on the label printer indicating it is which version of the printer, and HP systems has no ID of the printer by using the serial number correctly.

  Overall, I spent 10 + hours going round in circles with installation tools HP printer, which could easily have diagnised question but just told me to reboot the router, then try again. A very annoying feature is that you cannot leave the installer hp or HP Print doctor if the configuration of the printer is having problems. You have to go into the Task Manager and kill the installation application.

  Overall, very impressed - the installation of the device more painful I had over the years.

• Mail de Mac with Verizon email problem

  On my iMac running OS 10.6.8 I suddenly receive emails from verizon.  E-mail works fine on my MacBook with OS 10.9.4.

  Frequently, I'm unable to receive emails.  During this haplpens, I can still send email if I'm connected to the Internet.

  It is not continuous but often enough to be a nuisance.

  What could be the problem.

  Mary Lou

  I incorrectly described this problem.  I can't receive emails from verizon on my iMac running OS 10.6.8.  The rest of the description is accurate.  I can send but not receive.

  This is the error message sent by my verizon account.

  "Impossible to receive mail.

  There may be a problem with the mail server or the network.

  Check the setting or the "email Verizon" account or try again.

  The server returned the error: the attempt to send data to the server 'pop.verizon.net' failed. »

  I checked and my incoming settings are correct.

  Mary Lou

• scanning/copying on photosmart c4480 problem

  Hello, I see a few posts on the lines when scanning or copy but does not when you print. My all-in-one has the same problem with a page of A4 size in black for 2 inches. After reviewing the scanner/copier (sorry!) thingymajiggy moving the defective area looks different with no bar top unlike the part that works, that would cause and this part of the unit is easy and cost-effective to replace? Sorry for the vague language.

  I saw the impressions of the sample that you have uploaded.

  This cause by the lamp in the scanner.

  Please bring your printer to the nearest centre of Sevice HP/support service.

• HP Photosmart C4480: problem HP Photosmart C4480 print cartridge

  Tried to change ink cartridges, but they continue to fall.  Never a problem before. They snap, and then falling forward again. Tried to get the old empty ones and they did the same.  That they are really expensive, I can't go out and buy two others to try.  Not sure if the printer is broken or the cartridges. Help!

  Hi Gill800,

  Welcome to the HP Forums.

  I see that you are having a problem when trying to change the ink cartridges in the printer.

  Please click on the following link that deals with installing the print cartridges.  Please watch the video that are in the document just in case something is being missed or forgotten.

  If troubleshooting doesn't help not solve your problem, then I would say contact HP technical support to see all the other possibilities for you. ,: click here.

  Thanks for your time.

  See you soon,.

• Installation of Mac with Officejet 6700 problems

  I try to install the disk that came with my Officejet 6700 and he tells me that it can't open because it works on the OS 10.7 or below, and I OS 10.8.2.  Y at - it somewhere that I can download a new version of the material so that it will be compatible with my printer?

  Hello

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107209-1&cc=us&DLC=en&LC=en&OS=219&product=5058338&sw_lang=

  Don't forget to select HP Software recommended when installing to get full functionality.

  Finally, after completing the installation, restart your Mac and run the software update to ensure that your drivers are up-to-date.

  Shlomi

• Photosmart C4480 scan to iMac with OS 10.6.4

  Improved (strength) of the eMac (OS10.3.9) to an iMac (OS 10.6.4 My Photosmart C4480 print OK, but don't scan - 'scanner could not be initialized. The 'automatically' updated software only once; I've deleted and reinstalled from the original disk, but this did not help.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":
  
  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish
  
  Restart your Mac
  
  Now reset the printing system:
  
  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Can scan Photosmart C4480 works on a computer with Vista home edition?

  I have a HP computer with windows Vista, 32-bit.  I downloaded Photosmart C4480 and each time get an error at the end.  The printer works.  The copier works.  The scanner does not work.  I made scan trouble shooting and the shooting of printer problems and uninstalled and reinstalled the C4480 at least 4 times, following all the instructions.  Yet, I still can't scan.  Can you help me?

  I've included a link to a document, you can try:

  http://support.HP.com/us-en/document/c02661093

  Also, if you have not run the diagnostic utility scanner, it is very useful:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-96506-1&cc=us&DLC=en&LC=en&OS=2093&product=3418705&sw_lang=

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!

• Photosmart C6188 all-in-one not scan on the mac with OS 10.6.1

  I just bought a new mac with snow leopard and incapable of having the C6188 HP photosmart all in one analysis images on mac.

  I made the mistake of installing the original software which is come with the printer, and then discovered that it does not get. So I uninstalled the software and performed an update to the Apple software.

  I tried according to your publications/announcement about the leopard snow, preferably using system preferences and applications of image capture.  I can print all right, but unable to scan images on mac.  I get the error message is ' year error occurred while communicating with the scanner.  It's the same message that I get from all three applications (preferably, preferences system and capture image).

  A big thank you to all who can help...

  I'm glad it's working for you now.  Multiple page in one file is a driver problem.  Sorry, you will need to wait for an update.

  In the meantime, it is very easy to combine pages in a file (pdf) with preview.

• display problem when start my Mac with Sierra

  When my MacBook Pro 13 with the retina display changes to another other than 1280 x 720 resolution, when I boot my Mac, there will be a white strip above the logo apple with flash on the screen... Is there a solution?

  Hello fish6,

  After reviewing your post, it sounds like you have problems with the resolution of the screen changes and the screen flashes.
  I would recommend you read this article, reset the NVRAM can help with the screen problems you encounter.
  

  How to reset the NVRAM on your Mac - Apple Support

  Thank you for using communities of Apple Support. Good day.

• Photosmart 8450 prints only black and white with the new Mac with OS 10.6

  I just bought a new Mac with OS 10.6.  (former was OS 10.5)  Now my Photosmart 8450 will print only in black and white.  I installed the single upgrade on the site of HP, no change.

  Is there an other update I need?

  You want to disable automatic session opening, which may be why it behaves in this way.

  Go to System Preferences

  Go to security

  Under "for all accounts on this computer", place a check mark next to 'turn off automatic connection.

  In addition, I do not know if you set a password for the test account, but put something simple as 123 - just something / anything.

  Once that is done, choose log in the Apple menu, or reboot. This should bring you to the login screen where you can specify the account to enter.

• Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the pro

  Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the programs on my MacBook to work also on this computer. I copied the folder with the programs 'Programs' and the folder of the "Library / Application Support / Adobe" on my USB key and pulled on the MacBook in the program folder and the folder of Adobe. Then I restarted the computer. When I wanted to start a program, I got with Photoshop, Illustrator, and Flash, the error 6 error message. For Indesign: "Adobe ID missing required files please reinstall missing file / Library / Application Support / Adobe / support /... / ROMAN." TXT ".» But on my old computer I could not find a record of support for the Type in the path to the Library / Application Support / Adobe. And I don't know what I have to do because of error 6. Can someone help me please? Thank you very much.

  Avoid copying files from one computer to the other. It won't work. You run out of hidden files scattered around the hard drive and interrupt the licensing mechanism.

  Uninstall, run the cleanup tool.

  Adobe - Adobe CS5 clean tool

  Reinstall from scratch and enter your serial number.

  Download download install and Installation Help | Download and Installation Help

  They will install under 30 days of testing. Enter your valid serial number to unlock the tests.

• InDesign on Mac with OS 10.8 CS6 have problems with links

  Hello

  InDesign on Mac with 10.8 CS6 have problems with links. All links to other files need to be updated when you open a file, although absolutely nothing has changed for linked files.
  We can exclude the networking of business and the system hosting the files (software on RedHat Linux VM HELIOS). This happens with the Indesign files newly created and 'old'. For example, we create a file Tuesday, save it and open it again on MAC same exact Wednesday and all links to other fields (.indd, .png, .bmp, etc. nothing rare) must be updated because they all show the yellow triangle + black exclamation point symbol next to them. Someone else knows that, what can we do? We have absolutely everything tried and updated all the software from MAC OS to CS6 itself, but nothing seems to help for the long term.

  For any information required?

  Mr. Miller

  Thanks for your quick response.
  In fact, we noticed that there also seems to be something wrong with the timestamps:
  If we open the news via the MAC finder to a file (.psd for example) which is linked to one of our indesign files, it has a certain date of creation.
  If we then switch to the Indesign file that we just opened in which we had to update all the links and open information to exactly the same file looked at us in the finder, another creation date is indicated. So there also seems to be a mistake here (hope it is clear what I mean).

  Our network we are excluding the error cannot be "re-enacted". We have created several test files in Indesign (simple white page with a link to a .psd file which is also used in one of the allegedly defective files) and opened on different MACs with different versions of the OS over the past few days/weeks, but unfortunately files open without notifications or errors.

  Just as a background: a few months ago the problem seems to occur between MACs with different OS, 10, 6-10, 8 first. A file that was created on a MAC 10.6 could not be opened without updating all the links on a 10.8 Mac is why we've updated everything to 10.8. The error will not occur for about 2-3 weeks but then reoccured again. ?

  Have you heard something similar?

• Problems installing Photoshop CS2 on mac with os x 10.8.3

  I get the installation of Photoshop CS2 on Mac with os x 10.8.3 error message

  they are not compatible: http://roaringapps.com/apps:table / tags, _a, index_tags, _a