MacBook air 13 "has no forcetouch? It is a software or hardware built-in to the force click on features?

MacBook air 13 "has no forcetouch? It is a software or hardware built-in to the force click on features?

The MacBook has ForceTouch by http://www.apple.com/macbook/specs/

Force the touch trackpad for precise cursor control and pressure detection capabilities; allows strength clicks, accelerators, drawing sensitive to pressure and Multi Touch gestures

but the current MacBook Air does not by http://www.apple.com/macbook-air/specs.html

  • Multi-Touch trackpad for precise cursor control; supports inertial scrolling, turn, enter, three‑finger by sweeping, sweeping four fingers, tap, double-tap and drag

It requires integrated hardware.

Tags: Notebooks

Similar Questions

  • I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

    I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

    What do you mean, your message is not clear.

  • My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

    My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

    Hello

    Check if the hard disk needs repair.

    Open the disk utility, located app in HD > Applications > utilities

    Select Macintosh HD on the left then click the first aid tab, and then click Run.

  • I am suddenly unable to burn playlists to CD on my MacBook Air. Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

    I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.

    Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

    Hi BVBigelow,

    I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.

    12 iTunes for Mac: If you have trouble burning a disc

    Take care!

  • Cannot use PS CC get this message on macbook air you run an operating system that Photoshop can't stand anymore. See the system requirements for a complete list of the supported platforms.

    get this message

    You are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms.

    Hello

    Please see the system requirements for photoshop: -.

    Configuration of Photoshop

  • My Macbook air 2013 keyboard backlight exploded

    my light 2013 macbook air keyboard has just exploded, even when using the keys, that nothing past even when the bars aren't completely. to change the backlight Panel does not work or is a matter of logic board?

    These are its specifications

    It may just be a loose contact that should be indexed, once again. I had a similar problem - my MacBook Pro does not like bicycle walks on cobbled stones.

    The Apple Store can check, if a wire inside the keyboard must reconnect.

  • Firefox is my downfall of the MacBook Air?

    Twice in just twenty-four hours, the screen of my MacBook Air is suddenly flashed and then again dark. So, I have to restart the computer to make it back.

    Both times it happened I was just using Firefox, quietly reading online news stories.

    Since then, I've switched back to Safari, and my computer seems to work normally. But I don't like the idea that it could close at any time.

    Is probably the Firefox problem, or is it probably something wrong with my laptop?

    I bought this MacBook Air in the spring of 2014, about two years ago.

    Thank you!

    These must be run as administrator. If you have only one user account, you are the administrator.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    In the Console window, select

    DIAGNOSIS AND diagnostic USE information reports ▹ System

    (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu bar.

    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway.

    When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • can I upgrade the ram on my macbook air?

    I have a Macbook Air that has 2 GB of RAM.  Can I increase the RAM 8 GB without pulling my hair?

    The RAM cannot be improved in the MacBook Air.

  • Apple MacBook Air DVD Burner

    I'm trying to connect my Apple's DVD writer to my Macbook Air running Windows 7, but its does not work.  When I switch to the mode of Apple on the laptip, the DVD is recognized.  I also tried to plug the Apple DVD for a new HP laptop with Windows 7 installed and this laptop is also not recognize the drive.  Anyone have any ideas on the drivers that I can install to get the Apple DVD work?

    I found the problem with my question by sheer luck.  I had traced my G: drive on a HOME network.  My DVD then mapped in G: drive when the network WORK, but has not changed the description on my screen Navigation of Windows.  So I thought that the G: drive is always unavailable network location.  But when I clicked it, the Apple DVD information has been posted.

    I disconnected the mapped network drive, plugged the DVD player and whola, my connected perfectly Apple's DVD player.

  • MacBook Air stuck in the installation during the upgrade to windows 7 to 8

    I have windows 7 installed on my macbook air and today I got windows 8 pro upgrade for upgrading my macbook air to windows 8 and made sure I had bootcamp 5 installed. the first time I tried to install it went well until I got to the section where it says customize when you start windows 8 and none of my keys or trackpad work in it, I can't get past the section even pressing on enter. the second time I tried to install trackpad ++ is supposed to be the best driver to trackpad for windows 7 and 8 and thought that could make me past the Customize step and who does not. and I went as far to plug my usb wireless mouse that works with windows 7 and tried at my friends House who has windows 8 and y and the custom still mouse appear.  What should I do to get my trackpad work / what can I do to get past the custom screen. If I turn off my macbook air and then when I restart it says windows 8 installation failed, return to the original windows operating system (windows 8)

    (the preferences screen)

    -p.s. I write this on another computer and my mac is a macbook air mid 2013 with all installed bootcamp drivers

    This seems to be a known issue with trackpad Apple for Windows drivers and apparently only for Air. It is recommended to plug in a USB mouse, go into Device Manager and disable the devices on trackpad (Apple Multitouch and Apple Multitouch mouse under Interface devices), install the updates, restart the PC and then re-enable these devices. (then you can detach the USB mouse).

  • remove the own mac more than macbook air

    I don't know whether or not the program called MAC CLEAN PLUS came with my macbook air. I'd like to get rid of it. He appears at his own request to be renewed for a sum as it "scans" of my computer and said the computer have files that must be clean. It is possible that one of my family members or I had downloaded this program and I think that for what I read online is a computer false cleaner / malware app. Please help me. I need the steps to remove it from my macbook air.

    General way to uninstall applications is drag and drop it in the trash in the Applications folder. If it doesn't go in the trash, this means that it is open. In this case, you will need to make sure that it is not executed. You can do it from the window of Force quit (Apple - Force quit - highlight the application - Force quit menu). After that, it should go in the trash.

    If you see some kind of confirmation that you want to delete the application, click OK.

  • MacBook Air ceased to recognize Vizio TV via HDMI

    Hello

    I have been connecting my 13 "mid-2011 MacBook Air to my smart Vizio TV with a bolt of lightning for a HDMI cable for a while now to stream online TV. It's very simple. (Forgive me if these descriptions are a bit off, but to the best of my memory). With connected to the laptop, once that the cable is connected, the TV/HDMI adapter as well as the choice for the choice of display Built In both appeared in the display preferences panel. I choose the HDMI connection, go to the "input" on the TV Panel, select HDMI source, and that's it. Connected. Lately I had trouble with some buffering, and it was suggested to connect the TV as another option in this Panel of preferences on the airwaves. Unfortunately, I can't remember what we called this connection/option. But I did, there are options for the proposed resolution, which I brought from 1080 to 720 (another buffer solution I'd come through). Everything connected very well, and the entire installation sank my program with no buffering either. I felt that I had sent to my problem of buffering. Until...

    The next time I went to connect to TV, he did not appear in the display of the preferences panel. Indeed, the Panel itself was different, simplified. I tried the "hold down Option detect poster", reset the SMC, zap PRAM and nothing.

    For memory, the Macbook Air still connect to my monitor ViewSonic Desktop via a bolt of lightning to the HDMI adapter connected to a HDMI cable. In fact, I thought that it might reset everything that was causing the problem, but it didn't.

    I am trying to determine if the change of the type of things screwed connection. It's the only explanation I can find. Any comment is welcome.

    Patrick

    Info extra, when the cable is connected, the Macbook Air flickers a couple of times, the screen goes black and says "Data recovery" as he usually did, but said then "Signal"!

    Of course, this does not solve my question. I don't know why, it is marked as such.

  • I have no internet connection.  Can I get my MacBook air and ipad information form to synchronize

    I want to connect my i pad with my Macbook air.  I don't have access to the internet.  Can I do this?

    Use the same cable you use to charge the iPad to connect to the USB port on the MacBook Air.  Now, you can synchronize the iPad for the MacBook Air using iTunes on your Mac.

    For more information, please report in the iPad support forum... where the iPad experts hang out... linked below for your convenience.

    With the help of iPad

    Here, answer us the questions on Apple routers... the AirPort Express, AirPort Extreme and AirPort Time Capsule... products you see below.

  • What external monitor for MacBook air

    I want to get an external monitor for my MacBook Air. Any suggestion?

    Hi helenmarnat,

    I understand that you are looking for an external monitor to your MacBook Air.  Here's what we have available:

    Monitor Apple Thunderbolt Display

    The ultimate docking station.

    With a single cable, connect any Mac compatible Thunderbolt and get 27 inches of screen space high-resolution, high-quality audio, a FaceTime HD camera, ports FireWire 800 and Gigabit Ethernet - and a Thunderbolt port allows to chain additional high-performance devices such as hard drives and video capture devices.

    See you soon!

    See you soon!

  • How to open cd macbook Air

    Hello, I have a cd of file downloaded in my macbook air, but I don't know which is the correct application to open it. MacBook Air prompted me to search for an application in order for me to open the cd file I have. If someone can tell me what to do, much appreciated. Thank you.

    file to CD?

    give full name, including the extension: like "filename.ext".

Maybe you are looking for