MacBook detects the iPhone but doesn't detect photos on the iPhone.

Similar Questions

• insterted my IBM & reg travelstar 2.0, it is recognized as being plugged but doesn't show on the control panel and I can't access it.

  insterted my IBM & reg travelstar 2.0, it is recognized as being plugged but doesn't show on the control panel and I can't access it.

  I don't know what to do because he has all my work on it. An error report has been sent to me by saying: "Windows has detected a new device attached to your computer, but could not find the driver software, make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is ACPI\HPQ0006. »

  What should I do?

  Hi Rachael7861,

  1. have you installed the latest drivers for the hard disk, mentioned in the previous post?

  I suggest that you connect the hard drive to another computer to check if it is broken.

  Also check in Device Manager for the status of the hard drive.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• synchronization between the macbook pro and iphone works not

  My macbook pro and iPhone are not sync reminders or contacts. How wrong what?

  Hi cmatt3,

  I understand the reminders, and contacts are no longer sync between your iPhone and your MacBook Pro.  Here is an article I would recommend starting with this problem.

  Get help using iCloud Contacts, calendars, or reminders

  Please let us know if you aren't always sync after going through this article and thank you for visiting the communities of support from Apple.

  See you soon.

• Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

  Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is that I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is, I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  What, in particular, looking to sync with the Mac iCloud? If you mean things like Contacts, calendars, Notes, etc., then you want to go in under the  system preferences, click the iCloud and connect to iCloud there with your iCloud ID. Then select which items you want to sync'd via iCloud.

  What - what are you trying to do?

  See you soon,.

  GB

• When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  If you got less than a month ago, it is still under warranty of 90 days (I think), so take it back to the Apple Store you got OR no matter what Apple Store close to you if you bought it online.

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• Early 2009 Macbook A1181 battery recognized but 0% all the time load

  Hello
  I replaced my battery buy new ones but those cheap but has a few months (maybe that's the problem). It worked well hold a charge for a few hours and then a few weeks ago my Macbook started to shut down unexpectedly. I didn't know if the battery was the problem that it looked ok so I tried to remove the battery and my computer without it allows to see how it will behave.
  Those several days without the battery of my laptop is not shut down once but works on battery or even related to the MagSafe and with the battery inside of it could still turn off give me the "previous judgment cause: 0" in the console.
  In any case, I put the battery in, but after a day or so it stopped charging. MacBook recognizes the battery showing all information about it, I see the sign up right at right angles to the battery, but the charge is still 0% (showing "battery not charging") load. The led is yellow not green. not.
  I already reset SMC, PRAM repeatedly - nothing works. I also checked the battery connectors - everything seems fine. Here's the info from the system battery (I have translated some things coz, that is not in English):

  ІНФОРМАЦІЯ ПРО МОДЕЛЬ:

  HOT СЕРІЙНИЙ:

  ВИРОБНИК: SMP

  НАЗВА ПРИСТРОЮ: ASMB016

  Pack Lot Code: 0

  PCB batch number: 0

  ВЕРСІЯ ПРОШИВКИ: 006F

  Версія пристрою: 00aa

  ВЕРСІЯ АКУМУЛЯТОРА: 2

  ІНФОРМАЦІЯ ПРО ЗАРЯД:

  Left in charge (мА•год): 0

  Full charge: no

  Loading: no

  Capacity (мА•год): 3776

  ДІАГНОЗ:

  Number of cycles: 58

  Condition: Normal

  Battery: Yes

  Amperage (мА): 22

  Voltage (мВ): 0

  СИСТЕМНІ ПАРАМЕТРИ ЖИВЛЕННЯ:

  ЖИВЛЕННЯ ВІД МЕРЕЖІ:

  ТАЙМЕР ЗАСИНАННЯ КОМП ' ЮТЕРА (ХВ): 10

  ТАЙМЕР АВТОМАТИЧНОГО ЗАСИНАННЯ ДИСКА (ХВ.): 10

  ТАЙМЕР АВТОМАТИЧНОГО ЗАСИНАННЯ ДИСПЛЕЯ (ХВ.): 10

  Прокидатись у разі змінення джерела живлення: no

  Прокидатись у разі відкривання кришки: Yes

  Прокидатися для доступу по мережі: no

  Поточне джерело живлення: Yes

  Дисплей засинає із затемненням: Yes

  Hibernation: 0

  PrioritizeNetworkReachabilityOverSleep: 0

  ЖИВЛЕННЯ ВІД АКУМУЛЯТОРА:

  ТАЙМЕР ЗАСИНАННЯ КОМП ' ЮТЕРА (ХВ): 10

  ТАЙМЕР АВТОМАТИЧНОГО ЗАСИНАННЯ ДИСКА (ХВ.): 10

  ТАЙМЕР АВТОМАТИЧНОГО ЗАСИНАННЯ ДИСПЛЕЯ (ХВ.): 2

  ПРОКИДАТИСЬ У РАЗІ ЗМІНЕННЯ ДЖЕРЕЛА ЖИВЛЕННЯ: НІ

  ПРОКИДАТИСЬ У РАЗІ ВІДКРИВАННЯ КРИШКИ: ТАК

  ДИСПЛЕЙ ЗАСИНАЄ ІЗ ЗАТЕМНЕННЯМ: ТАК

  Hibernation: 0

  ЗНИЖЕННЯ ЯСКРАВОСТІ: ТАК

  КОНФІГУРАЦІЯ ОБЛАДНАННЯ:

  ДБЖ ВСТАНОВЛЕНО: НІ

  ІНФОРМАЦІЯ ПРО ЗАРЯДНИЙ ПРИСТРІЙ:

  ПІД ' ЄДНАНИЙ: ТАК

  ID: 0X0100

  Absorbed power (Вт): 60

  ВЕРСІЯ: 0X0000

  РОДИНА: 0X00BA

  BURNING СЕРІЙНИЙ: 0X008095F3

  Loading: No.

  You always have the battery you have taken. The former. The yellow on the magsafe tells you that he is at least try to charge the battery. If the battery contains nothing at all, at least it will tell you if it's the battery or something else. Or you need to find a good battery known for your Macbook model to try. Worst case may be the internal battery cable.

• I have Windows 7 and I downloaded Google Chrome. The white page opens but doesn't respond when I try to open an address.

  I have Windows 7 and I downloaded Crome. The white page opens but doesn't respond when I try to open an address. I tried to delete and download again without operating. I've got a massege on compatibility, but it has not been fixed. Please someone direct me in clear steps, what to do?

  original title: problem with Chrome

  You may have to contact support to Google Chrome on this problem.

  http://groups.Google.com/a/googleproductforums.com/Forum/#! Forum/chrome

• I can't update my first macbook pro CC 2015 but need to edit a file that was saved the last with new version 2015.1

  I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?

  I already tried to deinstallate and reinstallate to the program...

  Would be very grateful for any solution... !

  Hi Eclumes,

  I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?

  I already tried to deinstallate and reinstallate to the program...

  Are you a specific error when you try to update the application?

  In the affirmative, please follow these troubleshooting steps:

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Thank you

  Ilyes Singh

• When I click the icon creative cloud on the toolbar of my MacBook Pro, the window opens, but there are no icons on the screen. So I can't open the Lightroom program

  When I click the icon creative cloud on the toolbar of my MacBook Pro, the window opens, but no icons don't pop open. So I can't use Lightroom.

  I restarted the computer and its working fine now. In addition, my computer has been picking up wi - fi a neighbor. So when I fixed that AND restarted the computer icons came back.

  Thank you!

• I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.

  I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.  Any thoughts?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  First, that the software is old enough for that it may ALSO not work with Windows 7... but

  For Windows 7 you right click on the program and select a compatibility option in the pop-up window

• I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  you need a serial number for mac lr.  the serial number for pc and mac are different.

  Lightroom serial number is unique because it is cross-platform: works on PC and Mac.

  Same serial number for both.

• Dell U2515H on MacBook Pro 13 "(début 2011) glitters and loses signal"

  Dell U2515H on MacBook Pro 13 "(début 2011; 16 Go de RAM, SSD 256, carte graphique Intel HD 3000;)" Mac OS X 10.11.3). Directly connected by provided Dell MiniDisplayPort to DisplayPort cable. If the native resolution of the display of 2 560 x 1 440 px value it is a huge problem to get a stable image. Check out his video:

  https://www.YouTube.com/watch?v=NTZKGiKwJYM

  Restart the Mac, most of the time to solve the problem. We can then work for hours, but if the Mac goes to sleep, the chances are high that the Dell U2515H starts flashing again in wake up. If reduced to low resolution (interpolated) (e.g. 1080) problem has disappeared. No problem to the brothers natives on new MacBook Pro retina (end of 2013).

  This problem occurs in both of my U2515H poster. Swapped cables CDM - DP, no improvement either.

  Ideas anyone?

  Hello Andrew,.

  If I understand your video that you are having problems with your external monitor after the awakening of your MacBook Pro to sleep. Let's see if we can get out the sorted.

  You did a good job of troubleshooting so far and at least you know what it takes to get it back up and working correctly again. Some things you can try to ensure that this does not occur after waking from sleep would be to reset the memory NVRAM and SMC. Take a look at the article below for this and other options of troubleshooting to get this proerply of work.

  Get help with graphical problems on external displays connected to your Mac.
  https://support.Apple.com/en-us/HT201177

  Let me know if it helps.

  Take care

• Can I upgrade my macbook at the beginning of 2011 pro wifi 802.11ac?

  Can I upgrade my macbook at the beginning of 2011 pro 802.11ac?  Thank you.

  Perhaps, but it would be most likely to be via an external USB wireless adapter to do. I suggest you check out OWC to see if they have what you are looking for.

• Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the pro

  Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the programs on my MacBook to work also on this computer. I copied the folder with the programs 'Programs' and the folder of the "Library / Application Support / Adobe" on my USB key and pulled on the MacBook in the program folder and the folder of Adobe. Then I restarted the computer. When I wanted to start a program, I got with Photoshop, Illustrator, and Flash, the error 6 error message. For Indesign: "Adobe ID missing required files please reinstall missing file / Library / Application Support / Adobe / support /... / ROMAN." TXT ".» But on my old computer I could not find a record of support for the Type in the path to the Library / Application Support / Adobe. And I don't know what I have to do because of error 6. Can someone help me please? Thank you very much.

  Avoid copying files from one computer to the other. It won't work. You run out of hidden files scattered around the hard drive and interrupt the licensing mechanism.

  Uninstall, run the cleanup tool.

  Adobe - Adobe CS5 clean tool

  Reinstall from scratch and enter your serial number.

  Download download install and Installation Help | Download and Installation Help

  They will install under 30 days of testing. Enter your valid serial number to unlock the tests.