MacBook makes a ticking noise and doesn't turn on

Similar Questions

• Re: NB200 - making noise and the screen turns white

  Hello

  My laptop makes the high pitched noise and the screen turns white. Please help with this question.

  Thank you

  Hello

  It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

  Welcome them

• my laptop makes a hissing noise and buy light

  My laptop mouse no longer works so I restart the computer several times and after a while; whenever I try to start, just makes a noise like a hissing sound and does not start. should I consider a repairman? or does anyone have any ideas for troubleshooting? Ty

  Hi Bxblake,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP laptop and does not. Here is a link to cannot start the computer. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices.

  I'd be happy to help you if necessary. How can I find my model number or product number?
  Please respond with an operating system that you are running:
  Operating system Windows am I running?
  
  Please let me know.
  
  Thank you.

• charger is to make a slight noise and heat

  What is the problem?  Should I replace it?  What is the potential risk of a degree?

  Concerning

  Andreas

  The internal circuit of the charger is bad. Yes, get a new one. There is a risk of fire modest, Yes.

• Broken screen, iPhone 5 c Unresponsive and doesn't turn on

  Hello guys,.

  About a month back I dropped my iPhone 5 c from far away, I would say a metre or more. I couldn't get it fixed so I decided to let the battery drains down and leaving a safe place. After two weeks I went to turn on my iPhone and nothing don't to happen so I decided to try to load. Still nothing, I tried pressing the lock button and home for 15 seconds and connection to the computer and still nothing happens.

  I would appreciate an answer on what to do.

  Thank you

  Tare in there and see if you can get one off mandate changes for her.  Completely drain a lithium-polymer battery will usually ruin it - they do not real discharge of 100% recover and probably will never charge again.  And with your broken screen you cannot use the device anyway, and you don't know if there are other internal collateral damage.  I would say to cut your loses and get a new phone at this point.

• Satellite P20-771 with Windows 7: no noise and the screen turns white

  Hi all.. I installed Windows 7 Ultimate on this machine. I tried the latest Realtek AC97 drivers, install the driver and everything seems fine but no sound is produced at all. Regarding the graphics card, I used a few modded Nvidia Drivers 97.tel xx I found at Guru 3D... There is no way to activate AERO, the pc hangs if I try.
  I put the system to turn off the screen after 10 minutes of no use... it becomes white instead. How do I? Any clue? Also, does anyone know if there are any modded driver that can run AERO? All the ones I tried did not work.

  > any way to activate AERO
  P20 is an oldie and I guess that the hardware specifications are not good enough to run Aero!
  It was the same keys with Vista installed on old notebooks.

  On the Microsoft page, you can find some info what equipment is needed to use Aero.

  Welcome them

• photosmart HP 5510 vote B11a: noise and Auful printing problem

  Hello world

  I'm new here.

  I have a problem with my photosmart HP 5510 printer, when I try to print it makes a terrible noise and it does not print.

  I try update firmware, reset the printer, change the cartridge, remove all the piece of paper, but nothing.

  Could you help me please?

  Thank you

  Alessandro

  Hi @alessandro96

  I'd love to help you with the sound that you hear from the printer. I understand that you have already begun to solve the problem, but the noise remains. Please post back with the answers to the following questions;

  1. Is the printer on a flat surface?
  2. How long has noisy for the printer?
  3. Didn't help then the noise started? (ie. the paper, printer error message jam was fallen/hit, surge)
  4. There are flashing lights, or the error messages on the printer?
  5. When was the last time that the cartridges have been changed?
  6. If you are a Virgin copy, when you hear the noise?
  7. If you open the printer do you see broken parts?
  8. When opening upward where the cartridges go, they move freely?
  9. The cartridges are installed correctly? (ie. the cartridges are level and does not appear).
  10. Perform a hard reset. With the power on remove power cord from the back of the device, then from the wall outlet. Press and hold the power button for 30 seconds (drains the excess power of the printer). Plug the power supply into the wall outlet, then the printer.
  11. You still get the noise after that?

  I look forward to hear from you.

• Loud grinding noise and vibration: HP Pavilion G6-2313AX

  I own a HP Pavilion G6-2313AX, I bought 4 months ago. The laptop worked very well and I am very happy with it. Hower a problem has arised recently.

  My laptop fan makes a humming noise and creates a lot of vibration. It is, as I believe, not a normal behavior. I checked online for solutions and the potential causes. Most of them seem to think that what I need is to get the fan cleeaned.

  Now, my question is: should I expect as a result to a computer store, or should I go to a center of HP? It will make me pay so much? I live in India.

  Also, is it possible that this is another thing that a fan dirty which is the cause?

  just don't push it, no need to open it.

  

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!

• HP DV7-4020sa fan - cleaned noise and still make the noise

  Hello.

  I need help with my laptop. It is a DV7-4020sa.

  Since I bought the laptop (used) the fan made a horrible squeaky sound. I decided to fix it today so dissambled laptop computer and gave the fan a good clean and also put some wd40 on the axis of the fan.

  Unfortunately, after reassembling, the fan still makes noise. It's strange because if I pull the screen/lid slightly towards me, it stops the noise, and also if I apply pressure to the lower part on the base where the fan is located.

  Should I buy a new/submitted fan new to replace it, or is there a fix I can apply?

  Thanks in advance

  Hello:

  More than likely, the bearings of the fan are in ruins, and the only solution would be to replace the Fan/Heatsink combo.  The fan is not sold separately.

  Your model equipped with a discrete video adapter according to the product specification, so you should be the Fan/Heatsink Assembly which, according to the maintenance manual, includes hardware replacement, intended only to computer models with graphical subsystems with discrete memory.  Part # 606575-001 HP.

  It's quite expensive at $84.28, but I do not buy a used assembly (if you could find another one) and eventually encounter the same problem on the line.

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=00CD1EC2A53945949E211F17A82B64FC&SearchIn=PartNumber&SearchPN=606575-001

  Sometimes this happens because users simply spray a jet of compressed air into the fan intake and exhaust air vent covers, which is perfectly OK, as long as you place a PIN or something that can get through the protection grid, between two of the fan blades to prevent it from turning.

  It is not a contest to see how fast or strong you can do this fan to lament when cleaning, because that's how the bearings get ruined.  They are delicate and only designed to handle a certain RPM range.

  One can only imagine how far beyond this tolerance range fan bearings can go, when they are subjected to a jet of compressed air of a jet!

• HP Pavilion g7-2270us: HP Pavilion g7-2270us dvd drive no work and make noise and open habit

  my cd/dvd drive has stopped reading discs, and then for good measure he has decided to stop the opening and started making a noise that sounds like it is trying really hard to turn the disk. but just can't.  When I press eject, there is an another complainant grunt loud noise and refuses to open, and then tries to turn the disc

  the refusal of the opening that happened so I tried different disks to see exactly what it would not do.

  Thank you Jesus, I bought an extended warranty at FRYS for three additional years.

  of course it does not cover the screen is broken... but vizio is great.

  everyone having this problem

  the system is64bit and the driver for the cd is a 32-bit... and why the pilot ancient... Since 2006?

  The driver for the cd isn't as drivers for other devices... it's buried deep in the operating system in a layer that is probably there since Windows 2000. Your drive has failed and needs to be replaced. Are you sure that Frys extended warranty does not cover the screen? Some of them have no protection against accidental damage.

• Satellite A300 - Ticking noise all trying to load

  Hello

  Recently my satellite A300 has started to make a quiet ticking / clicking noise when it loads with the laptop battery is running. The noise is coming from the inside of the laptop and if I put the charger "brick" to my ear, I hear a noise inside than in in sync with the sound of ticking.

  Battery does not charge while the laptop is running (but clicking on icon battery says plugged in, load), the battery tends to remain some fees his establishment. If I turn off the coast, it will charge up to 100% and for the use of the laptop, then everything using it with 100% load without ticking noise is present.

  I guess it's a problem with the distribution of energy within the laptop. Does anyone have experience of this type of problem or suggestions about how I might solve this problem?

  Thank you

  Rab

  Hey,.

  I agree with the user above. It seems to be a problem if t AC adapter, you may notice the problem without adapter.

  If you contact an authorized service provider, you can order a new power adapter. An alternative you can ask the technicians if they also say that this problem s adapter an AC or not.

  A list of aspic, you can find here:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an authorized service provider

• Problems of excessive noise and fan performance.

  (I found a few similar posts, none seem to have any kind of resolution. I already submitted details to the comments for OS - X and MacBook Pro, because I know that Apple doesn't really care these forums.)

  I'm computer LITERATE in a company with more than 40 Macs. Most are 15 "and 13" MacBook Pro retinas, with some older MacBook Pro, MacBook Air and Mac mini. Almost all have had many problems of performance and especially complaints relating to noise fan since the upgrade to El Capitan.

  All Macs seem to rotate at about twice their original fan speed, even at idle with nothing else running in the foreground. If something - it is actually worse with time and not better. Some of them seem to be entering a mode "overheating" and the limitation of the CPU frequently, even with no real warning to the user. We receive complaints from fans go "full throttle" and not something unusual applications of grinding to a halt, while the activity monitor recount. Even these days - I'm writing this, my MacBook Pro runs only Safari and mail and fans just 15 "kicking until probably at 80% for no apparent reason. The CPU load is only about 8% currently according to activity monitor.

  The usual "fix" to a SMC reset and a clean install of the operating system seems to have no effect. We spent a lot of time in recent weeks reset wiping of Macs to try to resolve these problems. They are located on machines that have been almost completely unless they were actually under heavy load (such as virtual computers running or doing graphics/video editing), with the only change being an 'upgrade' to El Capitan.

  New - the same questions and complaints are reported in almost all of our Macs. I noticed similar problems on my MBP of House. I have a Mac Mini in my office who spends just Safari to view a network monitor page. It used to be silent and cycles now the fan and turns off often.

  At least while taking into account what is actually run on them, as well as information from the activity monitor, it does not appear that the CPU is overheating. It seems that something has gone wrong with the heat in recent management, as El Capitan assign a lower threshold than before well. I am everything to keep these systems cool, especially since Mbit/s in particular seem to run pretty hot anyway, but when the noise of the fans like a small jet taking off-it is a problem for many people.

  If anyone has found a solution to this, I'd love to hear it. Otherwise - if you are having similar problems - please send to Apple Feedback then perhaps they will at least look at or respond.

  If you run any antivirus Mac remove the system. A 3rd party cleaning or maintenance or utility network, any 3rd party firewall they are infamous resource pigs and Mac AV is responsible for a good part of mac OS that any other type of software while offering no protection against anything like that.

  systems running 10.11 with 4 GB of RAM or less will spend a good amount of time cached and if this is the case look into upgrading your RAM, if it's an option.

  If this isn't the case reset the SMC (which you did) followed by a PRAM reset as outline in this paper.

  Reset the management system (SCM) controller on your Mac - Apple Support

• new downloads cause a continuous scroll effect. currently have 12.0 and doesn't have this problem. have a brain injury and cannot have this fast scrollin

  new downloads cause a continuous scroll effect. currently have 12.0 and doesn't have this problem. have a brain injury and cannot have this fast scrolling
  each time new updates are coming they seem to cause scrolling the page.
  I need a mobile page where I'm in control of how it moves.
  I'm afraid that if I don't keep current updates that computer security will be compromised.
  Thank you
  P.

  Where do you find this scroll?

  Is it in a browser window or in the Download Manager window or another?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Please upgrade as soon as possible to the current version if you have downgraded because of this problem.

  If there is a problem with scrolling on web pages, then try to disable smooth scrolling.

  • Tools > Options > advanced > general: navigation: "Use smooth scrolling".

• Qosmio G20: Fan makes an awkward noise when he turns around

  Hey everybody,
  Another problem, but not Vista! Although it is always a problem!

  My exhaust fan makes a clunky noise when it runs. I hear it's going along and round like a noise of rachetty and then at other times its fine.

  Someone at - he had this?
  Should I open and give it a clean?

  Hello

  It's not easy to tell if the fan is malfunctioning or not.
  Qosmio G20 is a laptop very powerful and cooling modules are larger and stronger as modules on any of cooling for powerful laptop.
  If you use the solid performance applications such as games or videos of the cooling modules will work with maximum performance and are stronger.

  But of course; the cooling module could malfunction. In this case, it must be replaced.