MAcbook Pro IP manual for HP printer LaserJet M5025
Hi, I'm new to MAC OS X 10.8.4
I am facing problem by adding the IP address of the printer with the user name and password.
my company using HP LaserJet M5025
My IP address to the printer as "\\192.168.2.2\printer1".
My printer username is "Companyprinter\ZZZ".
Password is 'xxxx '.
How do to add these details to the Macbook pro to ADD/NEW printer, please help me...
In windows, I go to RUN and enter the password and username and "\\192.168.2.2\printer1".
The only way to connect to the printer via WIFI only
'\\192.168.2.2\printer1 '.
It's more than an IP address. This is a share name Windows (the name of a printer share, in this case).
So 192.168.2.2 is probably not be the IP address of the printer, but a Windows-based computer that is connected to the printer.
If you have not connected your Mac to all other HP printers yet, you may download and install this package of HP Apple's first printer driver:
http://support.Apple.com/kb/DL907
Try to print a test page using the control panel of the printer. According to the documentation of this printer model, should be a "Network address" button on the control panel (a real button, or more likely a software "button on the touch screen). The touch and then press 'print '. The printer should print a test page which contains a lot of information about the settings of the printer. Look below "TCP/IP": must be registered with the IP address of the printer. This is the IP address, you should be trying to set up on your Mac.
But if the network administrator has been serious about the obligation to use the user name and password when printing, that IP address is not accessible from your Mac, only from the 'agent' (the one with the IP 192.168.2.2) print server. Or the printer is maybe not an IP address at all: so the only way to access them is through the Windows print server.
To connect to the Windows print server, you can try these instructions from Apple:
http://support.Apple.com/kb/PH10880
But if the administrator of Windows was seriously security (that is, you have a Windows-based Active Directory pure, with legacy NetBIOS browsing disabled network), then you will probably need this procedure (really good instructions here, with pictures!):
http://its.Truman.edu/documentation/index.asp?docid=424
(In short: Apple has been sneaky and hiding advanced functionality, you'll need.) The "Advanced" option is not in the standard toolbar of the window "Add a printer", and you will need to right click on the toolbar and select "Customize toolbar", then turn it until you can use it.)
In step 7 of this procedure, you must type:
smb://192.168.2.2/printer1
It is the name of the printer share, translated into form compatible with Unix: preceded the share name of the "smb:" protocol identifier and the backslashes changed in regular oblique.
Your Mac must then ask the user name and password, when you follow the procedure described in the link above, or when you print to the printer for the first time.
Tags: HP Printers
Similar Questions
-
LaserJet P1102: printer connected to the macbook pro does not let me print double-sided
I have a macbook pro and an hp laser jet p1102 printer. I checked the duplex printing option, and then the printer printed the first parts of the document, I wanted to print. Then a message appears - "manual Duplex: without changing the orientation, remove the paper from the output of the battery tray and insert into Tray 1 print side down. Do not discard the blank sheets. Then, press the button to go. " I re-inserted paper, but then what I do next as I don't know where this button is Go! Help, please
Hi @insy,
I have read your message and see that you are trying to print manual duplex and you get the message to press the Go button. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
Please, try the following steps to see if it will help solve the problem. Do not take into account the operating system in the title. A solution for this problem is developing. Check the HP website for updates of software and firmware.
Good day! Thank you.
-
My Macbook Pro running El Capitan 10.11.6 shows my printer HP (envy 110) as offline after a print or scan session. I have to restart the printer each time I use it, and then the Mac it falls again after printing or scanning session.
I loaded the latest drivers on the Apple site without success. The two are on a wireless home network.
Help!
-
How to get the MacBook Pro 10.8 to connect to LaserJet P1006 shared by Vista-based computer
HP Laserjet P1006 have connected via USB cable to the computer Windows Vista (SP2).
Prints fine in the windows box.
In vista, windows shares.
Try to connect the printer to a Macbook Pro 10.8.
HP1006 drivers downloaded from the HP website.
Tried to connect via SMB, as many websites has loaded. (Using the Advanced tab and selecting the printer from windows via spoolss.
When I print, I see the print job to start, but nothing ever happens. I have to cancel the job.
I also tried to activate LPD on vista and then connect a Mac using the LPD. Similar results.
HP has a guide that guide a person through how to share a windows computer and then connect a 10.8 Mac to the windows computer to printing?
Something else which also confuses me, even if I installed the drivers 1006 on Mac, they do not appear when I goto Advanced-> use: choose a driver model or a printer.
Hello
First of all, that the drivers installed on the HP site?
The printer drivers for 10.8 non-existent Apple and not on the HP site, downloading the site exclusively for Mac OS X 10.5 or lower.
If you have installed a HP software, remember to delete following HP uninstaller or manually remove drivers by going to the library > printers and moving the HP folder in the Recycle Bin.
Next enter SDPP/happy/Resources. You can get P1006 in this folder and move the files to the trash.
Then, install the following package to have the printer drivers installed on your system:
http://support.Apple.com/kb/DL907
Once the drivers insalled, follow the steps below to try to add the printer manually:
- Choose System Preferences from the Apple menu.
- Choose Print & Scan.
- Click on the button + to add a printer.
- Press the control key while clicking on the icon 'Default' (or any other icon on the toolbar), and then choose Customize toolbar on the shortcut menu that appears.
- Drag the icon of advanced (gear) in the toolbar.
- Click done.
- Click on the Advanced icon that has been added to the toolbar.
- Choose the menu Type drop-down Windows.
- In the URL field, type the address of the printer in one of the following formats:
SMB://workgroup/server/sharename
SMB://Server/sharenameNote: "workgroup" is the name of the Windows workgroup that the computer sharing the printer belongs. "Server" is the name of the computer sharing the printer (or its IP address). "share name" is the shared Windows printer share name. If the share name contains spaces, replace each space with "% 20" (without quotes).
Tip: you don't need a "working group" when you specify the IP address of the computer (for example when the printer is on a different subnet), or if your Mac belongs to the same workgroup Windows (SMB).
- In the name field, type the name that you want to use for this printer in Mac OS X.
- Select the appropriate PPD or printer driver from the pop-up menu "with the help of Print."
- Click on Add.
Printer sharing is a feature of the operating system and not a feature provided by HP, still further it is more complicated and involve many aspects of operating system (e.g. advanced Options of sharing, etc.) while using such a device on a such different envoirnments, why HP doesn't provide any guide also and do not support such a task.
Hope you find this information helpful,
Shlomi
-
Y at - it a command to force a MacBook Pro to search for connected devices?
My MacBook Pro (retina, mid-2012 running 10.11.6) struggled to connect to my Drobo Mini - from the first day of the purchase of the Drobo Mini in February. Sometimes it connects, sometimes not. I worked with the support of Drobo, who went so far as to send me a replacement, but still no luck. I learned that I can usually get a successful connection carefully timing my login at a specific time in the 'dancing lights' Drobo starting routine. A little late or a bit early at the moment and there is no editing of the car. In this case, I have no choice but to stop the computer and the Drobo and try again - sometimes repeat this procedure 2 or 3. Frustrating and not good for the material, I'm sure.
Here's my question (for all the times I miss the right timing), is there a command I can give the MacBook to 'force' to 'search' connected devices? If so, I hope that they can connect. It's frustrating when the devices are connected physically but doesn't seems to "reach out" to the other.
At startup, the reader sends a signal to the adage of "I'm here, let's connect." computer Or, the computer continually detects when a device connects. Whatever it is, a device or another is dropping the ball.
Thank you for your help and advice.
Bill
Disk Utility.app > file select your drive > Mount
-
I have macbook pro late 2009. I started to upgrade to El Capitan 2 days ago. Downloaded, it stalled during installation. It has frozen about 95% installation and remained so for 2 days. Help, please.
Try to Safe Mode Setup:
https://support.Apple.com/en-us/HT201262
Start safe mode and see if the problem persists:
Restart now ' shift '.
(Wait to take more time to start in this way because it runs a check of directory first. Also give it some time after the start because he runs maintenance routines at the beginning.)
-
Old Macbook Pro is offline for a year
I have my old Macbook Pro that has been offline for about a year. Because he got a new and because I was sent, and then I thought I lost my charger. I found my charger and got it running, but all the keys Apple are outdated and I can connect to the app store to update.
It sets obtained. I had to update the date and time. I unchecked all date and time automatically and then re-checked. Which it then automatically updated.
-
What MacBook Pro is better for my situation?
Hello, guys.
Could you please help me decide which MacBook Pro is the best for my situation?
Currently, I chose between these models:
- MacBook Pro 15 "2.2 GHz / RAM 16 / 256 GB of storage / Iris Pro
- MacBook Pro 15 "(2.8) of 2.5 GHz / RAM 16 / 256 GB of storage / Iris Pro"
- MacBook Pro 15 "2.5 GHz / RAM 16 / 512 GB of storage / AMD Radeon R9 M370X (2 GB)
I'll use the laptop for:
- Webdesign. I work in Photoshop all day and it was sometimes messy (major projects, many of those open simultaneously, etc..). Theoretically, I would like for my laptop to be able to handle perfectly Photoshop, Illustrator and inDesign workflow, maybe even at the same time. Of course, all will be loaded up for the most part, but it should be imperceptible to work on projects of large size in Photoshop runs alone.
- Audio engineering. Recording/mixing/mastering audio as a hobby, which may require use of the processor 4 do. My current laptop (2.3 GHz Dual Core Intel i5 - 2410 M) cannot manage even the basics of what I need for comfort work with audio. Usually it is around 10-15 tracks, stock and third-party plugins sometimes. I omit the part that the new laptop should have completely no problems with recording audio through audio interface (no cracks, dents, noises and other things caused by lack of CPU and RAM). I guess that each of these three Mac is capable of a fluent audio recording, the question arises on the comfortable audio processing in the future.
- Navigation. I know that sounds ridiculous, but there are times that my laptop current can't live through an intense session of navigation. About 20-25 tabs with mixed content (text for most, a couple of video opened online). I use Google Chrome, which is quite noticeable on the CPU, but it's my personal preference in terms of browser.
- Web development. I would like to be able to make everything about web development fast and easy. That shouldn't be the problem, since even my laptop current meets my needs developing. Just let it be worth mentioning.
Given the above information, I can make a conclusion that I need:
- Retina display, press each tiny pixel on the screen of work related to graphic design
- Reasonably fast CPU and RAM
Initially, the more powerful MacBook Pro (with default 2.5 GHz and AMD video card) seemed like a logical option. However, after reading about the AMD video card I noticed that it is still lower than the average of those on the market (judging on the benchmark). Therefore, it seems that there is no reason to pay more for just a video card, comparing to the stack by default a cheaper model (the 15 "MacBook Pro 2.2 GHz/256 GB of storage). 0.3 GHz of processor is imperceptible, and the lack of hard disk space may be justified by external USB storage or by configuring the cheaper model for more storage by itself. The main difference is the video card. Please, correct me if I'm wrong on this conclusions.
Therefore, I came to decide what configuration is best with regard to the less expensive version of the MacBook Pro 15 ", the 2.2 GHz (default) or 2.5/2.8 GHz (configured). Consider the following:
- I'm dependent on a budget; slice of 100 dollars, in fact, issue
- My priority is a seamless workflow without any freeze for 5 minutes and loading/closing time take up to 10 minutes, as it does now
- It is not important if a graphic/audio project takes longer to make, but it is important to work freely during production
- I don't mind having an external USB storage, as long as he has a decent read/write speed (external USB flash are available for Macs, right?)
- Design or audio are not my original recipes, rather a freelance opportunities or leisure
I'd be really grateful if you could answer some of these questions and help me decide:
- If I had to choose between 2.2 GHz to 2.8 GHz boost or 256 GB of storage on 512 GB, which is more reasonable storage boost?
- Is there a really significant difference in the performance of the tasks that have been mentioned between 2.2 GHz and 2.5 GHz/2.8 GHz?
- No AMD video card makes a huge difference in terms of working with graphics? (Of course, he does, but it would be nice to take a look at the difference in the form of a chart or a reference; if it is not dramatic, then pay more for the video card makes no sense for me)
- Then Iris Pro (which comes with 2.2 GHz cheaper option) handle some minor games like World of Warcraft or Diablo 3? Not necessary on ultra or high settings, but on those that make the game playable and enjoyable. (Is not necessary, but it would have been a considerable advantage, because even though I'm not a hardcore gamer, it's nice to play some old games favorite from time to time)
Thanks for your opinions and suggestions!
If you select I would recommend 512 GB drive. Media projects can become very large, and I suspect that you also like to have pictures of the reserve, textures, etc available all the time. I'm not a professional graphic designer, but I create brochures and documents as well as videos of 15-20 minutes and on a 256 GB drive I will decide on a project, move everything turned off, and then start a new project. Sometimes, when I had several projects going at the same time I had to decide which awkward solution was the best.
Video Intel Iris Pro is better than I expected and I can play Diablo 3 on my MBP to 2015 on higher than smaller settings. I always use CS 5.5 because I refuse to rent my graphics software, so I don't know the State of the current Adobe software but I know that some users are griping on the 3D graphics and lower end GPU processors. I suggest you check out the Adobe forums.
-
laser jet mfp m127fn pro: need manual for laser jet pro mfp127fn
There was no selection board for printers. I need the manual for a laser jet mfp 127fn pro. whenever I click on this manual, on the website of hp, I get a blank screen with a tiny 'x' in a small circle at the top left of my screen. can someone tell me why I can't access the manual? I do not have a firewall.
I'm happy that using another browser worked for you.
-
My Macbook Pro keeps freezing for short periods
Hello
A new problem started with my Macbook pro in recent weeks. Initially, it was rare, but now he continues to be all a few minutes (it happened as I type this). What is happening is that my current application freezes for a few seconds, then returns to normal, and then the screen freezes. I'll expand a bit: while I'm typing this, suddenly the Safari froze and I just kept typing on, and when I use any action (like a slide four fingers), it works, but will not pass to the other window/app. After that, the kind of display of speeds upward, as it's contagious back in real time after the break (if I'm on vlc, TI video speed looks like 4 x, all the letters, I typd in pages apper as if Im typing God-speed). Then, a few seconds later, the computer will completely freeze, not to accept any user input and then resume as nothing has happened about 5 seconds later. This has happened very often now (I counted 3 times while I typed this place).
Please help me on what I should try to do to solve this problem. Initially, I thought it was a problem of RAM so I borrowed my Mac mini and inserted in my Macbook RAM. He worked as always for about a day, before returning to the State of the problem.
Data sheet:
MacBook Pro 15 "Early 2011 model
10.10.5 MacOS (Yosemite)
I7 2 GHz
4 GB 1333 MHZ DDR3 RAM (replaced by 1067 MHz RAM of the Mac Mini for a day)
Graphics Intel HD 3000 384
Any other information that you think will be useful, I'll add it.
Thank you in advance for your help!
Run this test and post the results here.
-
MacBook Pro requires authorization for 'printerAgent' each time the computer starts
HP OfficeJet Pro 8500 has e-all-in-one printer
Mac OS 10.7
Because I configured the printer whenever I start my computer, I get the message:
"Do you want the 'printerAgent' application to accept inbound connections of netwrk?
It comes from the firewall.
Every time I give permission, but it is not known.
I can't find any "printerAgent" app, so I can't add it to the list of "approved" firewall
How to sort, please!
Uninstall the printer software using the "scrubber":
Go to Applications/Hewlett Packard / click Uninstall HP
Click on continue
Highlight your device in the left pane
Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
Click on continue and let it finishRestart your Mac
Download and install this: support.apple.com/kb/DL907
Now reset the printing system:
-Sys Prefs, Print & Fax
-Right (control) click inside the box that lists your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.If you want advanced features, you can get the complete software of features for your printer from the "Support & drivers" link at the top of this page, but you don't need absolutely it.
-
New MacBook Pro GPU compatible for playback in Premiere Pro CS6 Mercury engine?
I am considering buying a new MacBook Pro (15 in., processor 2.8 GHz quad-core Intel Core i7, 16 MB of RAM) to mainly video edditing with Premiere Pro, I have the CS6 vertion. I wonder if its Mercury playback engine support GPU?
The laptop I think uses this two graphics cards:
- Intel Pro Iris graphics card
- AMD Radeon R9 M370X with 2 GB of GDDR5 memory
In the list of system requirements for first Pro CS 6; Premiere Pro system requirements for Mac OS and Windows is said "AMD over-pants" recommended for Mac and AMD Radeon GPU Acceleration (as the Mac comes with) is listed under Windows. This makes me wonder if the new Mac support the maximum speed for the Mercury playback engine?
In any case, I would appreciate your views as oppon whitch GPU card you guys recommend for a MacBook Pro work best with Adobe Premiere Pro CS6?
Hello
Only these cards are supported for CS6
- AMD Radeon HD 6750 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
- AMD Radeon HD 6770 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
Premiere Pro system requirements for Mac OS and Windows
Vinay
-
Hi all
I just "upgraded" my MacBook Pro to a model of end of 2013 with a NVIDIA GeForce GT 750 M to a whole new model mid-2015 with an AMD Radeon R9 M370X.
To compare performance, configure queues of same rendering with Premiere Pro Media Encoder in four sequences. These sequences contained native 4 K XAVC I, but four sequences have been "cropped" on a chronology of 25 1080 p, which means that I actually not export 4 K images. All four were slightly different, but while a 50 minutes.
As I wanted to get an example of 'real world', I left on the old machine as CUDA rendering engine, as it's the best performance I can get the machine and the rendering engine on the new machine that OpenCL.
I have to fill out a similar task at least once a week, so I know by experience, a queue of rendering as it takes about 2 hours by sequence to return.
The results were very interesting and a little tell-satisfactory. Essentially, render on the CUDA compatible machine times were about 30% faster through all sequences of four compared to the AMD powered machine.
Perhaps, somewhat lengthy explanation, but basically, I would like to know how to activate the acceleration in Adobe CC GPU - but especially with Premiere Pro, After Effects and Media Encoder.
Apple seem to think that they support OpenCL (https://support.apple.com/en-us/HT202823), AMD announce their compatibility with Adobe CC (http://www.amd.com/en-us/solutions/software-partners/adobe) - then why my GPU does not appear as a recommended here model? - https://helpx.adobe.com/premiere-pro/system-requirements.html
Any advice or suggestions are appreciated.
Hey Connor,
This R9 card comes out MAY 2015 and 2015 CC was released on June. So, any card (s) that is listed in Premiere Pro specifications list must pass appropriate tests. In addition, credit cards that has a 1 GB of VRAM is likely to allow "mercury Playback Engine" for use CUDA or open CL features.
According to the rendering time is considered as MVidia GT 750 M has a priority on AMD R9 M370X. You can check and compare the two cards, and also check the link below.
Radeon R7 M370 vs GeForce GT 750 M Mac
Vinay
-
HP Envy 7640: MacBook Pro photos to photo tray printing problem
Printer does not print photos from the Mac to the photo tray. Prints to letter size tray. I deleted the printer, readded it, updated the drive, the printer of the stop, pulled the plug of the printer, pulled the plug from the wall, stop comptuer and then all restarted. I can re - print a copy of a photo to the photo tray so I know it works. Keep constantly wasting trying to print to the photo tray. It seems to be the link between the Mac and the photo tray. Extremely frustrating!
Hi summerdays,.
You are welcome! I'm glad your problem is solved!
If you found my post useful, please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.
Best regards!
"Please click the Thumbs up icon below to thank me for having responded."
-
Whenever I open the mail or my macbook icloud application my apple id password. As soon as he entered he asks for it again. No problem with the ipad or iphone. No idea how yo stop it?
The iCloud system preferences pane, please just uncheck the Mail and check again.
Maybe you are looking for
-
Some Excel files download but do not show associated with Excel or seem to have no file name extension. If I download these files using Internet Explorer, they open properly. I can add xls or xlsx file and it will open properly with Excel. If I selec
-
V.10 likely security leak. called "Aurora".
See screenshotThen a connected to Google sites account, and then opens http://genuslupae.co.nr/ which is third box re-Director of my own Google site, Senior Manager of http Aurora mixtures with child frame https with the private data of Google users
-
I add credit to my account to use my online number?
Hello I just got a number online for one oversees the telephone conversation, but I don't know if I need to add credit to my account as well. It's free for me when someone calls me via my Skype number? If not, what are the rates? Thank you! Erika
-
How to reinstall Windows XP media center
I have an old computer with windows xp media Center is installed. I'm looking to build upon after sitting unused for over a year so I want to do a new installation. I also think that the hard drive is running out (maybe why I stopped using it) becaus
-
When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the vi