macOs Sierra on Macbook Pro 2012, speed test? (Eng/Ger)

Similar Questions

• Graphics problems in macOS Sierra on Macbook Pro

  I have a 13 "mid-2016 Macbook Pro (model MacbookPro 7.1 - 2.66 GHz/8 GB RAM) I've recently upgraded to Sierra. However, I noticed a slight increase in glitches since the upgrade - serious glitches. For example, the animation for arise Applications appears as two images, the majority of applications (including integrated) sparkle and on top of that, applications like Microsoft Remote Desktop and Parallels Pro 12 do not work right due to graphic problems (MS RD comes constantly creates an empty black window while in the analogies I was forced to power off the virtual machine dirty because all the options of the application itself that uses OS x) interface were flickering at which makes them unselectable).

  In fact, the graphics flickering and stuttering throughout what using Mac OS are quite widespread. Open a new window in Chrome, same thing. Same thing with Safari. Or iTunes.

  He got better with each subsequent reboot, but it is still pretty bad.

  Anyone else having this problem or have a resolution for this?

  He got better with each subsequent reboot, but it is still pretty bad.

  Keep rebooting until the problem is gone.

• macOS Sierra makes Macbook Pro running hot

  After updating all analytical images and processes of photo/cloud that the computer is super hot, and the fan is going like crazy.

  I want to use these features, but the macbook pro gets so hot that it burns the legs although jeans.

  Also very disappointed that she will not work a mid-2012 with the auto unlock on the watch.

  off, disconnect all external devices, then restart and reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  then restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  then restart normally

  If the problem persists, you can post a report of etrecheck for further analysis.

  www.etrecheck.com

• How do the initialization of the new hard drive in the macbook pro 2012 model

  I can't the initialization of a new WD hard drive in my macbook pro 2012.

  I installed the new drive and restarted with disk Warrior

  and followed the instructions to press option, command-R.

  When I followed the Protocol to download a new OS, disk utility does not see the newly installed

  HD, what to do?

  < published by host >

  Use disk utility to format drives, no Warrior drive

  How to install OS X on an external drive connected to your Mac - Apple Support

  Drives external Mac OS Extended format before using with Aperture - Apple Support

  http://support.wdc.com/knowledgebase/answer.aspx?ID=1362

• Which hard drive MacBook Pro 2012

  Hello

  I have Non - Retana MacBook Pro 2012, it has its default 500 GB hard drive, it is too small and too slow.

  I have found that I can put a 2 TB in current housing and a second in the SuperDrive slot should I want to.

  But my Question, above all, the it restrictions on the brand that I can use?

  If I wanted a SSD I know not all readers of work with her because of the TRIM settings, but I still don't know what to do if I went to SSD.

  Could I ask for some advice please on this please.

  I have £100 to spend so I was counting on a HARD drive not SSD for the more size.

  Any HDD SATA with a 2.5 form factor "will be compatible with your MBP.  Here are some examples:

  https://eShop.MacSales.com/shop/hard-drives/2.5-notebook/

  If you are considering an SSD, I recommend OWC and Crucial as the best sources.

  Ciao.

• Retina of ordinary vs MacBook Pro 2012?

  There are 2 versions of the MacBook Pro 2012, retina and retina (regular).

  so my question is that is should I buy? Meet with all the reasons.thanx.

  You can use the link below to compare the two models: http://www.apple.com/mac/compare/

• New update will not download on my Macbook Pro 2012

  New update will not download on my Macbook Pro 2012?

  What specific update?

  What exactly happens when you try?

• Help of MacBook Pro 2012 JBL headphones

  Hello. I just got the JBL 300 Everest helmet for my birthday a few weeks ago. I've tried everything. There is no update program to get this thing to work with my computer Mid MacBook Pro 2012. The computer is one year in July 2016. 2015 purchased. Anyway, the strange thing is, works automatic JBL with the Ipad Mini 1st gen 2012. I don't know why it will not work with the Mac (laptop)? I spent tons of money on it and do not use the headset!  The bluetooth features are still available, but the connection does not work between JBL through Macbook Pro!  Please help me as soon as possible!

  Thank you! Jilly

  Try to forget the JPB on your iPod and turn off the Bluetooth on the iPad. . It is likely that it is trying to trick on your iPod, not your Mac.

  Also make sure that no other Bluetooth device is within reach.

• Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

  Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

  Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• My SSD is not appear in the menu on the boot disk (macbook pro 2012)

  Hello world.  So I just got the macbook pro 2012 and starts to do-it-yourself work last night.  I took out the optical drive, transferred the existing location HARD disk (w / caddy) and installed an SSD in its place.  Then I cloned the SSD HARD drive.  No problems so far.

  When I went to change the boot drive startup disk preferences is where I ran into a problem.  My original HARD drive is the only projection.  I had the problem in choosing the boot drive during the reboot (the SSD will appear in this menu) and makes it the default value it.  SSD works very well and is now my main boot drive.  However, I still would like to show in startup disk preferences.  Is it possible to do (preferably without erasing the SSD)?

  Thank you!

  Relevant info - I'm running El Capitan and I used SuperDuper! to clone the HARD disk.

  OK, can I have found the problem.  Map of partition of the SSD has been MBR, no GUID.  I deleted it, reformatted and I am re-cloning it now.  I'll post the result (I hope that as a confirmed for another solution which meets with this).

• Installing new RAM in MacBook Pro 2012?

  Hello

  I don't want to install more RAM in my MacBook Pro 2012. I lose all information in the process of installation (hard disk for example, etc.)?

  Thank you.

  Cauchy wrote:

  I don't want to install more RAM in my MacBook Pro 2012. I lose all information in the process of installation (hard disk for example, etc.)?

  N ° you shouldn't lose all information on the hard drive.

  Make sure that the Mac is saved completely before trying to upgrade the RAM.

• I have Photoshop CS5 in my old Macbook (2007) and want to have it in my new Macbook Pro (2012).  What is ways options to get it in the new?

  I have Photoshop CS5 in my old Macbook (2007) and want to have it in my new Macbook Pro (2012).  What is ways options to get it in the new?

  You can download CS 5 below the link:

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

  Just in case, if you get an error when installing CS 5 as Setup is damaged, you shud eject a disc, see link below:

  https://forums.Adobe.com/thread/2003455

• FaceTime camera do not work after the installation of Sierra on MacBook Pro

  After you install macOS Sierra on my MacBook Pro retina, mid-2012, the custom of FaceTime camera

  turn on?

  What should do?

  Mr. Elkjaer of the Denmark

  Try these steps to resolve the problem of troubleshooting FaceTime for Mac: Troubleshooting - Apple support FaceTime

• Notes to close unexpectedly on the Sierra of MacBook Pro retina

  I can't open my Notes on Sierra MacBook Pro retina. I got this error after autoQuit "notes close unexpectedly". Any suggestions?

  Thank you.

  Hello iCodyRo,
  Thank you for using communities of Apple Support.

  I understand your message that you cannot open Notes on your MacBook Pro after installing macOS Sierra and get an error saying, "Note close unexpectedly". I know how it is important for you to be able to access your notes after upgrading the software on your MacBook Pro. I recommend that you restart your Mac in safe mode and it. Then, restart your Mac as usual and test again. The following article includes the steps to restart in safe mode:

  Try safe mode if your Mac does not end commissioning
  

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  Best regards.