Madden NFL 08 release question

Similar Questions

• I can't move the cursor once I start the game Madden NFL 08.

  Original title: Madden nfl 08 problem

  I have windows 7, after I start the game when say "click to start" the cursor fail, I can't move the cursor

  Hello
   
   
  1. have you made changes on the computer recently?
  2 do you have this game never properly run on your computer?
  
  Method 1.
  Check if it is set to the correct resolution. Before starting the game controls the display settings in the game.
  In addition, you can try to change the hardware acceleration and then check. Here's how:
  a. right click on a space empty on the desktop.
  b. go to the resolution of the screen.
  c. click Advanced settings, and then click the "troubleshooting."
  d. set the hardware acceleration in the middle. (You will get the option only if your video card supports).
  
  Method 2.
  Another possibility could be a third-party application is at the origin of the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  You can also consult about it with game Publisher EA Sports. 
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lack of x 64 drivers for TOS1900 & 1901 on Satellite A100-847

  Hello

  I'm not a native speaker, sorry for my English. I have improved my A100-847 to Vista x 64. Only two devices left to be installed, with PnP ID mentioned a: ACPI TOS1900 & 1901. I read a few threads on them (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20009) and I know that one of them is a driver "link Firmware." In general, I have to install utility VAP and Pasword and in some cases on the top of VAP reinstall to new support approx. 6 button. Unfortunately, as you will have experienced Toshiba provides only x 32 drivers... What is an object for sale x 64 laptop computers?

  I've been Googling ;-) around and nothing else is. I'm afraid that these devices being ACPI, very dependent on the machine (BIOS) I won't be able to find alternative drivers. Or maybe I'm wrong?
  Do you know if (if) Toshiba released x 64 version of the drivers?
  Thanks in advance!

  Martin

  Post edited by: Admin

  First of all, they do not sell machines such as 64-bit computers. They were mainly meant to run under 32 Bit OS´s and they have perhaps the CPU´s who could make 64-bit but since this machine is a machine consumer and not in the professional sector, it won´t be a real support of 64-bit software.

  On the other side: If there is no version which was sold with a Windows Vista/XP x 64 so they won´t have the drivers for it support. This has nothing to do that Toshiba has no good support. It's more a problem of source should be sought at Microsoft and the hardware manufacturer whose components are in this machine (Intel, Nvidia, Realtek, Texas Instruments, etc...)

  So, maybe you have to search some drivers on page intel since this stuff is maybe more limited on the chipset. I don't know, it's just a suggestion.

  And if your machine works well, then I would be happy with the currently running system. :)

  Welcome them

  P.S.: Regarding your 'driver-release-question': no, I Don t really know when or if they release them...

• E1200 Playstation 3 Help!

  I have a router E1200 and my ISP is Comcast.

  I need help to find how to have the best settings for online play. I did the static IP set up. But I still have some lag on a connection. I called Comcast to see what I can do. They said his problems with the router.

  I enter the numbers to the right for PS3 in the simple Port Forwarding and Port Range Forwarding. I turn on the DMZ and seized the same IP address on my PS3

  and I entered the following DNS

  DNS1:	208.67.222.222, DNS2: 208.67.220.220

  Can someone help me on something that I missed?

  PS: I don't have a problem with resetting the router together and starting from scratch?

   

  Capo202 wrote:

  Yes my PS3 connected wired. When I play Madden NFL 13, he said that I was disconnected because of network.

  And when I play Black Ops 2. I've launched offline sometimes. When I do the speed Test on the PS3... The download speed and upload speed changes a lot... once its speed of 30 Mbps DL and changes to 8 Mbit/s DL

  You talked with your previous post that you have triggered and transmitted so ports on the router with DMZ active. In fact, the firing port and shipping should be use both and also DMZ won't go to work if is port triggering or transmission is activated. So, make sure you that DMZ is disabled. Another thing is since the firmware of the router is already updated, reset the router for 30 sec, disconnect/reconnect the power cord and wait as the power light is solid before you configure manually. What are the ports you have open on the router?

• MITM Dell idrac openssl vulnerability

  Hello

  Nessus allows us to analyze our network. My most recent scan reports several openssl vulnerabilitis with a cvss score of 9.3, (note: HIGH), see below for more details. Found products are affected:

  Reference Dell idrac6 1.97

  Dell idrac7 1.57.57

  Nessus says that the possibility is confirmed, and the openssl version could also be vulnerable to the other openssl release questions the same day as the OpenSSL ' ChangeCipherSpec' MiTM vulnerability"released on June 5.

  If this is confirmed by dell? patches will be released for this fault?

  CVE-2010-5298, CVE-2014-0076, CVE-2014-0195, CVE-2014-0198, CVE-2014-0221, CVE-2014-0224, CVE-2014-3470

  Here's what I received the answer from Dell to the Openssl vulnerability.

  After a few calls to the help desk here is what I get for my iDRAC7 fighting flag of Foundstone security for vulnerability CVE-2014-0224scans:

  "The package OPEN SSL used here contains several components, you do not use the component that is vulnerable and affected, other components in this package are used but are not vulnerable".

  "Dell has determined that the products listed in the attached document are not affected by the problems.  Some products generated a module OpenSSL older (but not vulnerable).  This could be marked by a scanner.  "Dell is currently working to update the modules on a version that will not be reported for these issues.

  I also tried to download the document, I hope I can be read or downloaded.

  If this post has helped you please note.

  Thank you

  2376.Dell - ResponseOpenSSLSecurityAdvisory_05_June_2014_final.pdf

• Embedded Python import questions (numpy, scipy, h5py) in release mode

  Background:

  I'm working on a scientific application that uses numpy/scipy (Python modules) in the backend for the calculation and h5py for data collection.  My application consists of a layer of UI in QML/C++ calling an embedded digital computations Python interpreter.

  I have compiled successfully cross - the following libraries:

  BLAS, LAPACK, HDF5, Python3.2, numpy, scipy and h5py

  The application under app/native directory structure is as follows:

  + assets

  + qm

  + usr

  + include

  + lib

  + pkgconfig

  + python3.2<- numpy/scipy/h5py="" exists="" within="" the="">

  libblas.so

  libgfortran.so.3

  libhdf5_hl.so.8

  libhdf5.so.8

  liblapack.so

  libpython3.2m.so

  libpython3.2m.so.1.0

  libpython3.so

  So far, I am able to run my application in debug mode and was able to import various Python modules (including plug-ins) without any problem.

  Problem:

  As I approach of realization, I started testing in release mode and noticed the following:

  (1) loading external libraries that are formatted in the works of the file bar (ie: I'm able to call BLAS/LAPACK Fortran libraries HDF5 routines).

  (2) run the Python interpreter works integrated (in the main thread or in a separate thread)

  So, I am able to confirm that the external libraries and the Python interpreter running in release mode, as well.

  Problems occur when I tried importing Python modules:

  (3) import builtin Python modules/packages works without problem

  (4) import of modules/packages with relative path fails.  Example, if I run the command:

  Import numpy

  This works in debug mode but not in release mode.  After further review, it seems that when importing packages, any import with relative path statement will fail.  In release mode, the example above does not have:

  Of. import scimath as emath

  However, the following statement works:

  from .scimath import *.

  I have two questions:

  (1) no assumption whether it is a problem of Python, is a matter of output mode?  I'm leaning toward release mode because the same application runs in debug mode.  I also looked at the python source code and could not see nothing esoteric files IO operations.

  2) based on the observation, it seems that relative paths are handled differently between the Debug and Release modes.  Could someone tell me please to some documentation explaining the differences?  And if there is no such thing as these documents, may provide a brief summary?

  Thank you

  Josh

  Ok.  I think just, I solved my problem.  I will list the observations of first and then another solution that could be useful to someone in a similar situation.

  Bottom Line Solution (if you don't want to read more):

  Apparently, I have compiled my LAPACK library with extended precision of point floating (128 bits) that are not supported on the Cortex A9.  I recompiled LAPACK with double precision.  Running and the import of the application in release mode now works.

  Interesting observations:

  At first, I thought that the dynamic library release mode handles loading differently than the debug mode, because during development, I never came across questions.  As a result, I decided to directly link all libraries that numpy using in my application (even if the application does not use them).  Compile and link all are perfect, but of course, during execution, the numpy failed to load module.

  So I decided to run it in debug as a validation test mode.  Surprisingly, the application will fail at the binding stage!  It gives symbols not try to call the extended precision of the XBLAS library routines (which, as mentioned previously, does not work on the Cortex A9).  At this point, I'm completely flabbergasted that I've been running the application using LAPACK in debug mode without ever seeing this message for almost a year.

  I wondered how is this possible?  I also use the linear algebra of scipy module, calling LAPACK/BLAS routines without problems during development.  In debug mode, I never see this failed or any message indicating that there are unresolved symbols in my the LAPACK library.  In addition, I cross check all calculations against MATLAB/Octave and they are correct.

  Conclusions:

  Here are my conclusions, and if a BlackBerry person can confirm, I'll be very grateful:

  (1) in the mode of publication, the dynamic linker will check each symbol in a shared runtime library.  If no symbol is not resolved regardless of whether your application is used or not, the library of loading will fail.  This does not work in debug mode.

  2) there is a potential bug (not sure) in the linker which also behaves differently between the debug mode and release mode.  In debug mode, the linker cannot link a shared library if no symbol cannot be resolved despite the executable not referencing them.  In release mode, the linker will not FAIL.

  If the two above are met, then I would make a suggestion to change behaviors such as build step and run step behaviors are aligned between them.  Please let me know if it's intentional or if I should file a bug report.

  Thank you
  Josh

  PS: Btw, I also built a Fortran cross compiler in case you're wondering how I managed to compile the BLAS and LAPACK for BlackBerry.

• Quick question on installing RUEI, RUEI 12 c Release 4 (12.1.0.5)

  
  Hi people,

  I have started the installation procedure, downloaded RUEI 12 c Release 4 (12.1.0.5).

  I had a quick question.

  I decided using the following installation option:

  Installation and configuration, journalist and collector of component on the same server (Red Hat
  Enterprise Linux 5)

  Use the distance journalist Oracle db, GR 11, 2 on a separate server (Suse 11, x 86-64)

  This configuration should work, the Oracle db running on Suse 11, but the RUEI
  components are run on RHEL 5?

  Thank you

  Ashish

  Hi Ashish, this should be no problem at all. In fact, it is a common facility.

• Stupid question time.  Where is this download?  upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip

  All,

  Sorry, it's most likley a stupid question, but I can't find the below upgrade the file anywhere in the download section.  I looked, looked, had someone else to look at and I can not find.  The file is: upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip

  Someone at - it had a link?

  Point these KB of mine who need the upgrade file.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1022140

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1024641

  At this rate I'll just rebuild with 4.1 one at a time.

  Thanks in advance.

  Hello

  Simply follow the steps to download ESX 4.1. Connection, accept the agreement ect

  Attached to the last page, in that you have the option of what you need to download as

  Then you select the 'upgrade Pre packet' 24 MB

  As well as the "Zip 4.1 Uprgrade" 563 MB

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate. Thank you.

• Several questions to CRM On demand release 16

  Hi all
  
  I use the trial version of Oracle CRM On Demand 16 release, and I have several questions to ask:
  
  1. in the help document "Oracle CRM On Demand administration / Business process management/creation workflow rule Actions" mentioned that we can create a value for update action, but I can't find this feature in the workflow rule action.
  While we have to pay for this feature, like "assign an action book"?
  
  
  2. I can't add new values to lookup the status of Service request, it is a read-only.
  Is there a way to do this?
  
  
  Thanks for any suggestions!

  Hello

  1. the 'Updated value' Action is available under Triger Event-"before recorded change."
  I don't know why you have to pay to "assign an action book. It's on the box feature.

  2. Yes, the status of SR is a read-only list. A workaround that I can think of is to create a custom field for the status. Then run a WF to synchronize the values of the status field custom field initial status (particuluarly open and close values. Who will maintain the integrity of all matrices of SR).

• Satellite P200: Question on the release of the ATI HD 2600 drivers

  There is an output for a FULL XP HD2600 for the P200 driver?
  I'm waiting, I bought my laptop for the drivers, but it's still a BETA version.
  I have written several emails to Toshiba. I think seriously to buy another laptop with a NVIDIA card:

  1 & 2. Answer:
  There is a new driver available - no, it was the same driver each time, he was only re-downloaded, there is NO change
  3. response:
  use the omega drivers - haha, they don t work with 2 k cards
  4. response:
  go to laptopvideo2go.com - lol, they only have NVIDIA drivers!

  Because of this, I want to ask here:
  Is there information to a pilot for a P200 XP Ati HD 2600 driver version?
  I just want to know, if they will release a driver?

  Hi guys

  I have provided already answered your first thread in the playground!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27484&TSTART=0

  Information
  Several series of different Toshiba laptops are delivered with the same graphic card.
  So sometimes the newer drivers are in the other laptop series area on the Toshiba driver page. Just take a glance series of portable different that were delivered with the same GPU and check for the latest version.

  But there should also be a possibility to use the ATI drivers.

  You must download the ATI driver package and install the driver from the Device Manager.
  There, choose Install from a list or a specific location-> don't search. I will choose the driver to install.
  Then simply select the INF file that was downloaded with the package.

  But note; These drivers can be used only at your own risk!

  concerning

• Probably the SIMPLEST ever question, but how do I get the released items?

  It is perhaps the most foolish questions in the history of these forums, but I myself have encountered a small problem.

  I was playing with the elements "pinned" to my task bar and the HP Advisor dock and realized I can put my OWN Articles on the dark and without my taskbar of all echoes.

  So as I do, I unpin items and... can no longer find them... Most of the programs is downloads that I can watch in my programs but the YouCam is no longer on my computer.

  Now, I didn't delete it, I just have this marking THIS. Where is he? =(

  I hope someone can help me! Thank you!!

  -Roya

  PS. I'm running Windows 7 on a laptop HP G62 - 143CL, if that helps any.

  Hey

  Install this

• Clarification of the question that release of file is denied

  I'm not sure that this is the right place to ask this question, but I was instructed to come here so here I am.

  I have difficulties to reproduce described failure related to 701513 tickets.

  Can I have more details or ideally the screenshots to help me identify what you mean because I can't recreate the fault as described.

  «I'm testing your app on the BlackBerry PlayBook (OS version 2.1.0.1088) and the BlackBerry Dev Alpha (OS version 10.0.9.1103), when I open the app, I can't play the game properly because its too large on the screen and the unlock screen.»

  Neither I nor anyone else, that I asked was able to recreate this fault on a BlackBerry PlayBook with the latest version of the OS installed or the Virtual Machine of BlackBerry Dev Alpha.

  Thanks in advance.

  Is this a review of the app in the presentation of the world? If so, you must ask the app world forum.

• Releases of question on 2 separate, one for Playbook and the other for BB10

  Hello

  At the moment we have an application that is currently enabled for BB10 and Playbook. However, we've recently re-written the application take over much better phone interface, and we would like to submit a version that is not specific to BB10 and have a separate for Playbook version.

  What I hope we can do is just uncheck the BB10 of the current version and let the Playbook checked, then submit a new version with only selected BB10. However, I wasn't sure if this overwrite the version of the Playbook and pull it store since the release "more recent" doesn't have the verified Playbook. Is it possible to have these 2 releases by-side, but be in the same "application"?

  Thank you
  Jake

  It works as you expect it. In fact you don't have to uncheck the BB10 phones on the old version.

• Release date and modified Date Scripting Question

   var contentsOfFrame =  
              doc.name+"\r"+  
              getLogInUserName() +"\r"+  
              getLocaleDateString() +"\r"+  
              getDateModification() +"\r"+ // Whats the Coder for Date Modified?
              getOutputDate()+"\r"+ // Whats the code for Output date?
              getAppUserName();  
  

  I can't find anywhere what should be the Modification Date and the release date.  Can you please help.

  Try this site:

  http://www.indesignjs.de/extendscriptAPI/indesign11/#VariableTypes.html

• Question: EP3.8 documents released by Oracle still?

  The release notes for v6113 has a statement to refer to docs EP3.8 UI extension.  I'm not finding EP3.8 docs on the website of the documentation or heard that EP3.8 is out yet where this doc is in the directories instead of Web site.  Those who will be soon communicated?  If it is already rejected, can I get a pointer for where is the document?  Yes, I'm looking for a clue... Thank you.  BeckieC

  Release Notes v611., page 3

  UI Extensibility Points of Extension provided now out of the Box

  The release of UI in extensibility Pack required 3.6 client extensibility feature do selectively customizations to PLM for process files to enable the functionality of Basic. This change removes this customization requirement, addition of the UI extensibility hooks throughout the application. These extension points have been added to the pages primarily for each application (GSM, MSRC, NDP, PQM, etc.) as well as some windows popup in GSM and SCRM. See documentation Extension of UI extensibility Pack 3.8 for more details. (34112)

  3.8 EP and the documentation is now available.